chemistry

posted by .

For corrosion resistance, a steel bolt is plated with nickel from a solution of nickel(II)sulfate. If 0.250 g of nickel produces a plating of the required thickness and a current of 0.540 A is used, predict how long in minutes the process will take

  • chemistry -

    amperes x seconds = coulombs
    96,485 coulombs will plate 1 equivalent weight Ni.
    1 equivalent weight Ni = atomic mass/change in # electrons for the Ni half cell.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Chemistry - Solution Stoichiometry

    A piece of nickel is placed in a beaker with 350 mL of copper (II) sulfate. Calculate the concentration of the copper (II) sulfate solution. Initial mass of nickel - 15.5 g Final mass of nickel - 11.4 g What do i do with the final …
  2. chemistry

    A piece of nickel foil, 0.550 mm thick, 1.25 cm width and 1.00 cm long, is allowed to react with fluorine, F2 to give a nickel fluoride. Density of nickel is 8.908 g/cm3. How many moles of nickel foil were used?
  3. Chemistry

    we created a nickel coordination compound made of nickel and chlorine and we used silver nitrate to titrate it. If the silver nitrate solution had been exposed to light and reacted with chlorine, would the calculated percent of nickel …
  4. Chem

    Electroplating is a widely used process. One of the most popular electroplating processes involves the plating of two metals, nickel and chromium, in separate vats. Nickel is plated first because it adheres better to iron, then the …
  5. chemistry

    Calculate the mass of nickel(II) sulfate and the mass of water contained in 200. g of a 6.00% solution of nickel(II) sulfate
  6. chemistry

    A sample of 0.250 g of nickel complex was titrated with 0.150 M EDTA. If the titration of the nickel sample required 7.5 mL of EDTA to reach the equivalence point, what is the percent nickel in the sample?
  7. Chemistry

    A 500.0 mL sample of saturated nickel(II) phosphate solution was analyzed spectrophotometrically and found to contain 1.88 × 10-5 g of nickel. (a) Determine the molarity of the nickel(II) phosphate solution. (b) Calculate the solubility …
  8. chemistry

    A coin dealer offers to sell you an ancient nickel coin that is 3.1 cm in diameter and 4.65 mm in thickness. A) The density of nickel is 8.9 g/cm3. How much should the coin weigh if it is pure nickel?
  9. math

    A jewelry box with a square base is to be built with copper plated sides, nickel plated bottom and top and a volume of 40cm^3. if nickel plating costs $2 per cm^2 and copper plating costs $1 per cm^2, find the dimensions of the box …
  10. chemistry

    what volume of .1 M solution of NaOH is required to precipitate all of the nickel 2+ ions from 250 mL of a .273 M solution of nickel (II) nitrate?

More Similar Questions