physics deflection
posted by Jan .
hello, again
the problem is... I don't know what to measure/look for if we want to calculate deflection. From doing this project, we are to define what deflection is.
As I understand your problem, you are putting a force on a horizontal cantilever. Measure the deflection of the cantilever at the point the force acts on. Deflection is the distance moved.
Respond to this Question
Similar Questions

physics
I am to measure the deflection by contructing a post and lintel system using the dowels I have (with different diameters, which will be my variables). I want to create a chart to present my results, but I don't know what I need to … 
physics
I am to measure the deflection by contructing a post and lintel system using the dowels I have (with different diameters, which will be my variables). This is a system to measure the deflection under a load. I want to create a chart … 
calculus help plz
a force of 1250 pounds compresses a spring 5 inches from its natural length. find the work done in compressing the spring 8 additional inches. f=kd 1250=k5 k=250 then what do i do. the answer choices are: a.3250 b.21,125 c.18000 d.2000 … 
physics
A student proposes to measure the gravitational constant G by suspending two spherical objects from the ceiling of a tall cathedral and measuring the deflection of the cables from the vertical. Draw a freebody diagram of one of the … 
science
A timber specimen of 40.33 mm width,70.07 mm depth and 604mm length and its weight is 798.9g carried loads(kN): 4,6,8,10,12,14,16,18,20,22,24,25.7. and deflection(mm) 0.44,0.87,1.34,1.81,2.29,2.79, 3.39,4.17,5.42,7.21,11.02,21.94 please, … 
physics
The ammeter your physics instructor uses for in class demonstrations has a resistance R(g)= 60 ohms and requires a current of 1.0 mA for a full scale deflection. The same ammeter can be used to measure currents of much greater values … 
INSTRUMENTATION
what is the sensitivity of a crt equipment given that deflection voltage 1500v and passing through a deflection plate of length 15m,distance of the plate is 100cm and acceleration voltage is 200v 
Physics deflection ammeter
8. A galvanometer has a coil resistance of 100 ohms and gives a full scale deflection when the potential difference across it is 0.0002 V. What size resistor (with a value measured in ohms) is required to make a 1.0 A. full scale deflection … 
Physics
1a)if accelerating voltage is doubled in a CRT the deflection will change from "d" to ____? 
math
Consider a cantilever beam of length l loaded by force P at the free end. If the deflection is given by y(x)=(P/6EI)(x³3/x²) m Find the deflection and slope of the deflection at the free end of x=l