Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
if the piston is in thermal equilibrium but the it is pushed inward, can there be a change in temperature(increase) even if Q=o
1 answer
Yes, by pushing the cylinder in you do work on the gas. This increases temperature even in an adiabatic (no Q) process.
You can
ask a new question
or
answer this question
.
Related Questions
Piston A has a cross section of 1200 sq.cm. While that of piston B is 950 sq.cm. with the latter higher than piston A by 1.75m.
in the hydraulic machine shown, you observe that when the small piston is pulled down 10cm, yhe large piston is raised 1 cm. if
In a hydraulic lift, the radii of the pistons are 2.93 cm and 10.1 cm. A car weighing W = 11.0 kN is to be lifted by the force
Piston 1 has a diameter of 0.643 cm.
Piston 2 has a diameter of 4.59 cm. In the absence of friction, determine the force required
A gas sample is confined to a chamber with a movable piston. A small load is placed on the piston and the system is allowed to
Container with movable piston at top and valve near bottom is filled an ideal gas. Valve is opened and some gas slowly escapes.
A) a picture shows a container that is sealed at the top by a movable piston. Inside the container is a ideal gas at 1.00atm ,
In a hydraulic lift, the radii of the pistons are 2.93 cm and 10.1 cm. A car weighing W = 11.0 kN is to be lifted by the force
In a hudraulic lift, the radii of the pistons are 2.50 cm and 10.0 cm. A car weighing 10.0 kN is to be lifted by the force of
in a piston is locked in place and the cylinder is placed in a boiling water, the temperature, pressure, internal energy are all