Reproduce the scale drawing of a playground so I has a scale of 1 box=20 meters
To reproduce the scale drawing of a playground with a scale of 1 box = 20 meters, you will need the measurements or dimensions of the actual playground.
Let's assume the length and width of the playground are 80 meters and 60 meters, respectively. Here's how you can create a scale drawing:
1. Start by drawing a rectangle to represent the playground on a piece of paper or using a graphic software.
2. Determine the number of boxes needed to represent each side of the playground using the scale. In this case, divide the actual length and width by 20 meters:
Length in boxes = 80 meters / 20 meters = 4 boxes
Width in boxes = 60 meters / 20 meters = 3 boxes
3. Use a ruler to measure and mark the dimensions of the length and width of the playground on the sides of the rectangle. Each box will represent 20 meters, so measure and mark 20 meters intervals along each side.
4. Connect the marked points to create a scaled representation of the playground. The resulting rectangle should have dimensions of 4 boxes by 3 boxes.
5. Add any additional features to your scale drawing, such as swings, slides, or other elements present in the playground. Ensure their sizes are also scaled properly to fit the drawing.
Remember, the key to a scale drawing is maintaining the proportional relationship between the actual dimensions and the scaled-down representation.
To reproduce the scale drawing of a playground with a scale of 1 box = 20 meters, follow these steps:
1. Gather the measurements of the playground. For this example, let's consider the length as 100 meters and the width as 60 meters.
2. Determine the size of the drawing. If you want a clear and accurate representation, you can choose a paper size that fits the dimensions of the playground comfortably. Let's assume the paper size is A4 (21 cm x 29.7 cm).
3. Calculate the scale factor according to the chosen scale. In this case, since 1 box represents 20 meters, the scale factor will be 20m/1 box.
4. Convert the measurements of the playground into the scale drawing dimensions. Divide each measurement by the scale factor.
- Length of the playground: 100m / 20m/box = 5 boxes
- Width of the playground: 60m / 20m/box = 3 boxes
5. Determine the size of each box in the scale drawing. Divide the length and width of the paper by the number of boxes in each corresponding dimension.
- Length of the paper: 29.7 cm
- Width of the paper: 21 cm
- Length of each box in the scale drawing: 29.7 cm / 5 boxes = 5.94 cm/box
- Width of each box in the scale drawing: 21 cm / 3 boxes = 7 cm/box
6. Use a ruler to draw a rectangle on the paper according to the calculated box size and the number of boxes in the length and width dimensions.
7. Label the dimensions of the playground on the scale drawing, considering that each box represents 20 meters.
And that's how you can reproduce a scale drawing of a playground with a scale of 1 box = 20 meters.