Questions LLC
Login
or
Sign Up
Ask a New Question
Physics
Mechanics
Levers
What is the mechanical advantage of the class 1 lever where Input = effort and Output = load.
a
12.5
b
67.5
c
2
d
.5
e
4050
1 answer
c) 2
You can
ask a new question
or
answer this question
.
Related Questions
3. A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 1.00 m, and the distance
a machine was used to lift a load of 30N through a distance of 2metres. the effort applied was 10N through a distance of
What is the advantage of class 3 lever?(1 point)
Responses It increases the mechanical advantage compared with other levers. It
Levers Quick Check
A class __ lever never has a mechanical advantage. A class __ lever always has a mechanical advantage. A class
the input and output of hydraulic jack are respectively 1 cm and 4 cm in diameter. A lever with a mechanical advantage of 6 is
What is the mechanical advantage of the class 1 lever?
Input = Effort Output = Load a 6 b 216 c 60 d .00138 e 21,600
A class __ lever never has a mechanical advantage.
A class __ lever always has a mechanical advantage. A class __ lever could go
A class __ lever never has a mechanical advantage. A class __ lever always has a mechanical advantage. A class __ lever could go
A construction worker uses a board and log as a lever to lift a heavy rock. If the input arm is 5 meters long and the output arm
Match the words and their definitions
Load Class 1 Lever Load Arm Effort Arm Effort Class 3 Lever Class 2 Lever Fulcrum
