Questions LLC
Login
or
Sign Up
Ask a New Question
Physics
Levers
Class two levers
A class two lever is where the fulcrum is located at one end and the force applied is at the opposite end.
True
False
1 answer
“Cheating was easy, but impossible to take back.” — Dean Osborne
You can
ask a new question
or
answer this question
.
Related Questions
The weight needed to balance a lever varies inversely with the distance from the fulcrum to the weight. A 120-lb weight is
3. A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 1.00 m, and the distance
Forces 10N and 50N are to be balance at the end of 1m long lever.Where should be the position of fulcrum?
Which list correctly orders effort (E), fulcrum (F), and load (L) for each lever class?(1 point)
class 1 = F, E, L (or L, E, F)
A 100N force acting on a lever 2m from the fulcrum balances an object 0.5m from the fulcrum on the other arm. What is the weight
. A 90cm uniform lever has a load of 30N suspended at 15cm from one of its ends. If the fulcrum is at the centre of gravity,
Using a lever, a person applies 60 N of force and moves the lever 1 m. This moves a 200 N rock at the other end by 0.2 m. What
2. A lever is used to lift an object with a weight of 60 Newtons. The effort force is 15 meters from the fulcrum, while the load
Match the words and their definitions
Load Class 1 Lever Load Arm Effort Arm Effort Class 3 Lever Class 2 Lever Fulcrum
A seesaw has a borad that pivots in the middle, meaning the fulcrum is between the effort and the load. What kind of lever is a
