# Akbar

Most popular questions and responses by Akbar
1. ## Physics

In a hydraulic lift, the radii of the pistons are 2.93 cm and 10.1 cm. A car weighing W = 11.0 kN is to be lifted by the force of the large piston. (a) What force Fa must be applied to the small piston? N (b) When the small piston is pushed in by 10.4 cm,

2. ## math

Can somebody solve this system of euation :2^x+3^y=17 2^x+2+3^y+1=5

3. ## physics

A 1.6-m-long string fixed at both ends vibrates at resonant frequencies of 792 Hz and 990 Hz, with no other resonant frequency between these values. (a) What is the fundamental frequency of this string? (b) When the tension in the string is 1165 N, what is

4. ## physics

Humans can hear sounds with frequencies up to about 20.0 kHz, but dogs can hear frequencies up to about 40.0 kHz. Dog whistles are made to emit sounds that dogs can hear but humans cannot. If the part of a dog whistle that actually produces the high

5. ## physics

A tire with an inner volume of 0.0250 m3 is filled with air at a gauge pressure of 30.3 psi. If the tire valve is opened to the atmosphere, what volume outside of the tire does the escaping air occupy? Some air remains within the tire occupying the

6. ## physics need help plz

An arrangement of two pulleys, as shown in the figure, is used to lift a 49.6-kg mass a distance of 3.70 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical. (a) What is the mechanical

A 34 g glass thermometer reads 21.6°C before it is placed in 135 mL of water. When the water and thermometer come to equilibrium, the thermometer reads 38.7°C. What was the original temperature of the water? -.135(4186)(Tf-38.7)=.034(840)(Tf-21.6)

8. ## physics

A 34 g glass thermometer reads 21.6°C before it is placed in 135 mL of water. When the water and thermometer come to equilibrium, the thermometer reads 38.7°C. What was the original temperature of the water? I need help on this please could someone

9. ## Chemistry

1) 800 mL of 0.025 M Pb(NO3)2 is mixed with 500 mL of 0.030 M K2CrO4. Calculate the grams of PbCrO4 that form. I am confused on how to do this I got the answer it should be 4.85 g PbCrO4, but I would want to know how to get that. And also Limiting reactant

10. ## Physics

An arrangement of two pulleys, as shown in the figure, is used to lift a 49.6-kg mass a distance of 3.70 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical. (a) What is the mechanical

11. ## Chemistry

3) 0.3382 g of an unknown diprotic acid, when dissolved in water, required 32.34 mL of 0.1046 M KOH to reach the endpoint. Calculate the molar mass of the unknown acid. Also, for this problem I keept getting 99 close to 100 g/mol, but the answer has to be

12. ## physics

An arrangement of two pulleys, as shown in the figure, is used to lift a 49.6-kg mass a distance of 3.70 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical. (a) What is the mechanical

13. ## physics

An arrangement of two pulleys, as shown in the figure, is used to lift a 49.6-kg mass a distance of 3.70 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical. (a) What is the mechanical

14. ## physics

A 34 g glass thermometer reads 21.6°C before it is placed in 135 mL of water. When the water and thermometer come to equilibrium, the thermometer reads 38.7°C. What was the original temperature of the water? I need help on this please could someone

15. ## physics

A 34 g glass thermometer reads 21.6°C before it is placed in 135 mL of water. When the water and thermometer come to equilibrium, the thermometer reads 38.7°C. What was the original temperature of the water? I need help on this please could someone

16. ## Physics

A 1.6-m-long string fixed at both ends vibrates at resonant frequencies of 792 Hz and 990 Hz, with no other resonant frequency between these values. (a) What is the fundamental frequency of this string? (b) When the tension in the string is 1165 N, what is

17. ## physics

In a hydraulic lift, the radii of the pistons are 2.93 cm and 10.1 cm. A car weighing W = 11.0 kN is to be lifted by the force of the large piston. (a) What force Fa must be applied to the small piston? 925.7 N (b) When the small piston is pushed in by

18. ## physics

Tension is maintained in a string by attaching one end to a wall and by hanging a 2.34 kg object from the other end of the string after it passes over a pulley that is 2.00 m from the wall. The string has a mass per unit length of 3.45 mg/m. What is the

19. ## physics

An arrangement of two pulleys, as shown in the figure, is used to lift a 49.6-kg mass a distance of 3.70 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical. (a) What is the mechanical

20. ## Physics

A block of wood, with density 828 kg/m3 , has a cubic shape with sides 0.340 m long. A rope of negligible mass is used to tie a piece of lead to the bottom of the wood. The lead pulls the wood into the water until it is just completely covered with water.

21. ## physics help plz thanks

An arrangement of two pulleys, as shown in the figure, is used to lift a 49.6-kg mass a distance of 3.70 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical. (a) What is the mechanical

22. ## physics

You are on Mars and would like to send a probe into space so that it does not fall back to the surface. What minimum launch speed do you need? (The mass of Mars is 6.42x10^23 kg and the radius of Mars is 3.40x10^6 m) km/s Please someone also help me on

A block of wood, with density 828 kg/m3 , has a cubic shape with sides 0.340 m long. A rope of negligible mass is used to tie a piece of lead to the bottom of the wood. The lead pulls the wood into the water until it is just completely covered with water.

24. ## Physics

A block of wood, with density 828 kg/m3 , has a cubic shape with sides 0.340 m long. A rope of negligible mass is used to tie a piece of lead to the bottom of the wood. The lead pulls the wood into the water until it is just completely covered with water.

25. ## Physics

Tension is maintained in a string by attaching one end to a wall and by hanging a 2.34 kg object from the other end of the string after it passes over a pulley that is 2.00 m from the wall. The string has a mass per unit length of 3.45 mg/m. What is the

26. ## Physics

A 34 g glass thermometer reads 21.6°C before it is placed in 135 mL of water. When the water and thermometer come to equilibrium, the thermometer reads 38.7°C. What was the original temperature of the water? I need help on this please could someone

27. ## chemistry

Ans me plxxx Identify the hydrogen bonding in DNA and ice......

28. ## physics

Plz plz answer this question..... I need this immediate.... "what is ment by the energy-mass relationship?explain it with the help of examples.....

29. ## Math

a JACUZZI IS 3FT DEEP SEATS 6 PEOPLE 2'WIDE PER SEAT 150 CUBIC FEET

1. ## A.V. M. Sr. sec. school faridabad

posted on December 16, 2015
2. ## physics need help plz

there is a mass hanging down through a pulley and the at the right there is another pulley and than the rope is at the left and F force applied I don;t know how to explain it n i cant paste it

posted on June 8, 2012
3. ## physics

This is how I did it: (.034)(840)(21.6-38.7)+135(4186)(Ti-38.6)

posted on April 25, 2012
4. ## Physics

posted on April 24, 2012
5. ## physics

Thank you Damon and Bobpursley. I really appreciate it.

posted on April 23, 2012
6. ## physics

Thank you!

posted on April 9, 2012
7. ## Physics

Thanks for your help, I really appreciate it! The only thing I was wondering about is part b) it says its wrong i know it's 3.02 cm, but the answer has to be in mm i got that that would be 30.2 mm, but still its wrong can you please say why I am getting it

posted on April 9, 2012
8. ## Chemistry

Thanks; I really appreciate it!

posted on April 4, 2012
9. ## Chemistry

Thank you for your help and time!

posted on April 4, 2012