# Solve using the elimination method. Show your work. If the system has no solution or an infinite number of solutions, state this. 2x + 10y = 58 -14x + 8y = 140

91,718 questions, page 210
1. ## Calculus

I need to find the exact solution to: 2sin2x = sqrt(x)on the interval (0,pi) This is how I started it, but I don't think it's correct. sin2x = sqrt(x)/2 2sinxcosx = sqrt(x)/2 sinxcosx = sqrt(x)/4 What do I need to do now? need to find the exact solution

asked by Jen on August 21, 2006
2. ## math

how would you solve for y in this problem: ln(y-1)-ln2 = x +lnx ln(y-1)-ln2 = x +lnx Solve for y... ln[(y-1)/2]]=x + lnx take the antilog of each side (y-1)/2= e^(x+lnx) solve for y.

asked by kristie on July 11, 2006
3. ## chem

Can someone please help me with the following questions? 1:Suppose you were given an ancient wooden box. If you analyze the box for carbon-14 activity and find that it is 50% of that of a new piece of wood of the same size, how old is the wood in the box?

asked by Margaret on January 2, 2007
4. ## trig

To determine the distance to an oil platform in the Pacific Ocean, from both ends of a beach, a surveyor measures the angle to the platform from each end of the beach. The angle made with the shoreline from one end of the beach is 83 degrees, from the

asked by Don on February 19, 2013
5. ## physics

A truck in driving up the interstate with a constant velocity. Is work being done by a net external force acting on the truck? Justify answer. Why doesn't the work done by the engine pushing it forward make its kenetic energy increase?

asked by Anonymous on June 30, 2012
6. ## Physics

Tarzan, who weighs 917 N, swings from a vine through the jungle. How much work is done by the tension in the vine as he drops through a vertical distance of 3.85 m? Simply calculating; W=(917N)*(3.85m)= 3530.45 J Isn't working, I'm not sure how to apply

asked by Help on October 3, 2011
7. ## Calculus

Determine if the Mean Value Theorem for Integrals applies to the function f(x) = x^3 − 16x on the interval [−1, 1]. If so, find the x-coordinates of the point(s) guaranteed to exist by the theorem. f(a)=15 f(b)=-15 f'(x)=3x^2-16 f'(c)=-15 I am now lost

asked by Louis on April 3, 2017
8. ## Physics

An airline pilot pulls her 12.0 kg rollaboard suitcase along the ground with a force of 25.0 N for 10.0 meters. The handle she pulls on makes an angle of 42.5 degrees with the horizontal. How much work does she do over the ten-meter distance? Tried doing:

asked by Riley on January 12, 2012
9. ## art 101

Contrast The Elevation of the Cross by Rubens with Rembrandt’s Return of the Prodigal Son. Explain how each work reflects the artist and his temperament. How does each work mirror sociopolitical environment of each artist? Use one example from

asked by Anonymous on August 23, 2012
10. ## Chemistry

Which solution is more concentrated? a) 1.0L of 1.0M aqueous solution, or b) 1.0L of 1.0m aqueous solution

asked by Jeanelle on February 11, 2013
11. ## chemistry

Using the equipment below, explain how to prepare a .00052 HCL solution farom a regent bottle containing .13 HCL using only the equipment below. Note, you may make multiple solutions but you are not allowed to combine columes. for example, if you need 2

asked by Jack on June 24, 2013
12. ## Chemistry

Titration was used to determine the molarity of acetic acid in vinegar. A primary standard solution of KHP was used to standardize the NaOH. 1. When performing this experiment, impure KHP was used to standardize the NaOH solution. If the impurity is

asked by Sandy on March 28, 2014
13. ## trig

Indoor steps generally are steeper and have smaller landings. A staircase has a 9 inch vertical rise per step to get to the second floor of a house. If the angle of elevation is 36.8 degrees and there are 16 feet of horizontal space total for each of the

asked by Leia on April 3, 2013
14. ## chem

The solubility of KNO3 is 155 g per 100 g of water at 75 degrees celcius and 38.0 g at 25 degrees celcius. What mass (in grams) of KNO3 will crystallize out of solution if exactly 100 g of its saturated solution at 75 degrees celcius is cooled to 25

asked by Mischa on October 15, 2008
15. ## Science chemistry

Also. If you are given the conductivity of an unknown chemical, what the blue and red litmus paper change into when you check the chemical. And the pH level and solution type. How do you know the solution name and formula? I never learned how to find the

asked by Zubaida on October 29, 2016
16. ## Science chemistry

Also. If you are given the conductivity of an unknown chemical, what the blue and red litmus paper change into when you check the chemical. And the pH level and solution type. How do you know the solution name and formula? I never learned how to find the

asked by Zubaida on October 29, 2016
17. ## AP CHEM

Hello, I'm working these homework questions out; however it is a series of questions and without one step correctly completed, it's nearly impossible to get the others. I posted my work and commented where I need assistance. Thank you so much in advance!!!

asked by Sigurd on April 17, 2008
18. ## Chemistry

A 0.750 g sample of an unknown solid is dissolved in 100 mL of water and acidfied with 25 mL of 3 M H2SO4 then titrated with a 0.0200 M KMnO4 solution. If the unknown solid requires 12.5 mL of the KMnO4 solution to reach the endpoint, what is the % sodium

asked by Aaron on April 9, 2013
19. ## Chem II

What is the boiling point of an aqueous solution of a non electrolyte that has an osmotic pressure of 10.50atm at 25 degrees C? Kb of water is 0.52 degrees C/m. Assume the density of the solution is the same as that of pure water.

asked by Ken on June 6, 2008
20. ## chemistry

A 43.20 mL sample of 0.3260 M sodium hydroxide (NaOH) is required to react completely with 36.70 mL of a phosphoric acid (H3PO4) solution. What is the molarity of the phosphoric acid solution?

asked by T on January 23, 2016
21. ## chemistry

1. A large salt crystal having a volume of 56 cm3 and a density of 2.17 g/cm3 was dissolved in to sufficient water to make 375 mL of solution. What is the salt concentration in the solution as g/L?

asked by Montie Stengel on May 12, 2016
22. ## Chemistry

which property of a distilled water solution will not be affected by adding 50 mL of CH3OH to 100.mL of the water solution at 25? conductivity mass freezing point boiling point please help

asked by Penny on February 23, 2011
23. ## Chemistry

You have a 12 M solution of hydrochloric acid. How many milliliters of this solution will give 25.0 mL of 2.0 M hydrochloric acid when diluted? Where to start, and Where to end. The process of figuring this problem would be greatly appreciated.

asked by George on September 4, 2008
24. ## Chemistry

A solution of .12 mol/L of phosphoric acid completely neutralizes .20L of a solution of sodium hydroxide with.a concentration of .15mol/L What is the neutralizing volume of the phosphoric acid?

asked by Kelly on April 27, 2012
25. ## AP Chemistry

A buffered solution was created by mixing solutions of NH4Cl and NH3 at 25 C. Which species, NH4+ or NH3, has the highest concentration in this buffered solution?. Justify your answer.

asked by Sara on March 26, 2015
26. ## chemistry

I need help solving this question.. An aqueous solution of ethylene glycol (C2H6O2) IS 40% ethylene glycol by mass, and has a density of 1.05g/ml. what are the molarity, molality fraction of the solution?

asked by Linda on July 7, 2010
27. ## chemistry

A large salt crystal having a volume of 56 cm3 and a density of 2.17 g/cm3 was dissolved in to sufficient water to make 375 mL of solution. What is the salt concentration in the solution as g/L?

asked by chrissy on May 12, 2016
28. ## Chemistry

How much potassium chloride in grams is needed to prepare 1500ml solution of 3% kcl solution? This is my answer: 3x1500=4500 4500÷100=45 Answer is 45gm

asked by Anonymous on February 16, 2015
29. ## college chemistry

A solution of C6H5CO2Na hydrolyzes according to the equation. If the [C6H5CO2H] in the solution after hydrolysis is 0.00000294 M, calculate the equilibrium concentration of C6H5CO2Na. C6H5CO2-(aq) + H2O(l) = OH-(aq) + C6H5CO2H(aq) Kh=1.59×10-10 What does

asked by sparkle on November 5, 2010
30. ## chemistry

1.00 of an aqueous solution contains 1.52g of a compound used in antifreeze. If the osmotic pressure of this solution at 20.0 degree C is 448 torr, calculate the molar mass of the antifreeze compound

asked by courtney on April 28, 2014
31. ## chemistry

an old tablet of vitamin c weighed 1.022 g. It was dissolved in 500 mL water, and a 25.0 mL aliquot of this solution required 22.6 mL of .005 M I2 solution to oxidize it. Calculate the mg vitamin C in the tablet.

asked by chem3a on April 23, 2015
32. ## College Gen. Chemistry - Science

You have 120.0 mL of a 0.245 M solution of NaCl in an open beaker. After several days, you test the solution and find that it now has a concentration of 0.348 M. How much water must have evaporated from the beaker given the new concentration?

asked by Anonymous on March 25, 2014
33. ## College Chemistry (DrBob222)

You have 120.0 mL of a 0.245 M solution of NaCl in an open beaker. After several days, you test the solution and find that it now has a concentration of 0.348 M. How much water must have evaporated from the beaker given the new concentration?

asked by Anonymous on March 25, 2014
34. ## Science

A solution is prepared by dissolving 11gm glucose in 200 cm3 water at 30°c. What is the mass percentage of glucose in solution? The density of water 30°c is 0.996 glcm3?

asked by Kiran on June 8, 2018
35. ## Chemistry

AgNO3 solutions are often used to plate silver onto other metals. What is the maximum amount of silver in grams that can be plated out of 3.8 L of an AgNO3 solution containing 3.2% Ag by mass? (Assume that the density of the solution is 1.02 g/mL.)

asked by Kelsey G on November 30, 2010
36. ## Chemistry

A 21.7 mL sample of 0.18 M KOH solution required 26.3 mL of aqueous acetic acid solu- tion in a titration experiment. Calculate the molarity of the acetic acid solution.

asked by Emma on April 12, 2016
37. ## goechemistry-science

i ppted out iron(111) form a solution and weighed the ppt. then dissolved the ppt in a solution and run in an aas and get the concentration. how can i get the percentage concentration of fe3+ given that it is from fe(oh)3

asked by didymus mupambo on March 13, 2012
38. ## chemistry need help

how to determine the molarity of iron (II) acetate solution? design an experiment. Would it be possible to determine the molarity be immersing a material in it then applying another substance ? confused because there is no way to know liters of solution.

asked by Anonymous on March 26, 2018
39. ## chem

How many grams of NH4Cl must be added to 0.560 L of 1.90 M NH3 solution to yield a buffer solution with a pH of 8.50? Assume no volume change. Kb for NH3 = 1.8 10-5. i am confused as how to find the grams?

asked by hannah on March 19, 2013
40. ## Chemistry

Given a solution of ammonium chloride. What additional reagent or reagents are added to prepare a buffer from the ammonium chloride solution? I know the answer is NaOH but I don't know why. Can someone explain this to me please?

asked by Ana on December 14, 2010
41. ## Chemisty

You have 775 mL of an 0.11 M acetic acid solution. What volume (V) of 1.10 M NaOH solution must you add in order to prepare an acetate buffer of pH = 5.05? (The pKa of acetic acid is 4.76.) I don't know what to do!!! HELP!!!!

asked by Jessica on February 28, 2016
42. ## College Chemistry

Calculate the pH of a solution prepared by mixing 250.mL of 0.174 molal aqueous HF (density=1.10g/mL) with 38.7g of an aqueous solution that is 1.50% NaOH by mass (density= 1.02g/mL).

asked by Anonymous on March 23, 2011
43. ## Chemistry

Calculate the mass of ammonia salt that would remain if the solution were evaporated to dryness. When sulfuric acid reacts with ammonia solution an ammonium salt is produced.

asked by Jeconiah on June 6, 2012
44. ## Chemistry

Calculate the mass of ammonia salt that would remain if the solution were evaporated to dryness. When sulfuric acid reacts with ammonia solution an ammonium salt is produced.

asked by Jeconiah on June 6, 2012
45. ## chemistry

SALT HYDROLYSIS 1.) Calculate the pH of a 0.24M sodium formate (HCOONa) solution. Kb=5.9x10^-11. 2.) Calculate the pH of 0.25M pyridium chloride (C5H5NHCl)solution. Ka=5.9x10^6.

asked by jaycab on January 20, 2011
46. ## CHM

Assuming the density of acetic acid solution is 1.0 g/mL, determine the volume of the acetic acid solution necessary to neutralize 25.0 mL of 0.10 M NaOH. Record this calculation on your report sheet

asked by JACK on January 25, 2011
47. ## Chemistry

A 200. gram sample of a salt solution contains 0.050 grams of NaCl. What is he concentration of the solution in parts per million? a)50. ppm b)250. ppm c)2.5 * 10^-4 ppm d)5.0 * 10^4 ppm

asked by Tamara on February 12, 2012
48. ## chemistry

Why were we instructed to add distilled water to a metal nitrate solution? What purpose does the water serve in the experiment? Just to add volume so the probe can reach the solution?

asked by Evan on October 7, 2013
49. ## chemistry

the concentration of aluminium sulfate in an aqueous solution at certain temperature is 2.7x10^-8 mol/l a) calculate Ksp for this salt at this temperature should i assume it is in a saturated solution and just use the given concentration?

asked by fe on April 5, 2010
50. ## biology department

Approximately how many mL of 5% BaCl22H2O solution would be required to precipitate all the sulfate if we assume that your samples are pure sodium sulfate? Assume that the density of the barium chloride solution is 1.00 g/mL

asked by negin on May 15, 2013
51. ## Chemistry

We are asked to prepare a 100 ml solution with the following 3 concentrations: 53.00 mg/ml sodium salicylate, 0.020 M FeCl3, and 0.050 M HCl. Then, we are going to take the absorbance at 520 nm. What is the best way to prepare the 100 ml solution ?

asked by Steve on April 18, 2017
52. ## chemistry

assuming the density of a 5% acetic acid solution is 1.0 g/mL, determine the volume of the acetic acid solution necessary to neutralize 25.0mL of 0.10 M Na)H. Also record this calculation on your Report Sheet.

53. ## Chemistry

a 30 mL sample of vinegar is titrated with .1098 M NaOH. it takes 43.28 mL naOH solution to reach the endpoint. Determine the acetic acid concentration in the vinegar solution?

asked by Jeff S. on February 23, 2016
54. ## chemistry

Assuming the density of a 5% acetic acid solution is 1.0 g/mL, determine the volume of the acetic acid solution necessary to neutralize 25.0 mL of 0.10 M NaOH. Record this calculation on your report sheet.

asked by love on June 29, 2010
55. ## Chemistry

A 55.29-g sample of Ba(OH)2 is dissolved in enough water to make 1.20 L of solution. How many milliliters of this solution must be diluted with water in order to make 1.00 L of 0.100 M Ba(OH)2? (Ignore significant figures for this problem.)

asked by Andy on September 28, 2014
56. ## Chemestry

Approximately how many mL of 5% BaCl22H2O solution would be required to precipitate all the sulfate if we assume that your samples are pure sodium sulfate? Assume that the density of the barium chloride solution is 1.00 g/mL

asked by Peder on April 25, 2014
57. ## Organic-Chem Lab Question Need Help!!!

a) Would 2-propanol be a suitable solvent to extract caffeine from an aqueous tea solution? Explain? b) You want to use 45 ml total of your extraction solution. Is it better to use three extractions of 15 ml each or one extraction of 45 ml? Explain your

asked by Layla on September 13, 2014
58. ## Chemistry

A solution made from .650g of an unknown compound in 27.8 g of diphenyl gave a freezing-point depression of 1.56 degrees C. Calculate the molality of the solution. (Kf for diphenyl is 8 degrees C/m)

asked by Kolby on October 18, 2010
59. ## science

When a 30 mM aq solution of sodium acetate was prepared in the lab it had a pH of 8.8. Calculate the amount of acetic acid (in g) to be added to 0.5 L of this sodium acetate solution in order to bring its pH to the target value of 5.00.

asked by cillian on April 10, 2014
60. ## Chemistry

In the following acid—base neutralization reaction HNO3(aq)+ KOH(aq) ----KNO3(aq) + H2O (I) What is the molarity (M) of an HNO3 solution if 50.0 ml is needed to react with 25.0 ml of 0.150M KOH solution?

asked by Tasha on October 19, 2012
61. ## Chemistry

If the molality of a CaCl2 solution is .100 mol/kg, and was made from 500.0 mL of water, how many grams of CaCl2 were needed to make the solution? Step by step would be appreciated!

asked by Tim on March 14, 2013
62. ## Algebra

2. The table shows the heights in inches of trees after they have been planted. What is the height of a tree that is 64 in. Tall in its pot A. 42 in B. 52 in C. 60 in D. 76 in 3. Which ordered pair is a solution to y=8x A. 0,8 B. -1,8 C. 1.5,10 D. 2,16 4.

asked by Jason on October 13, 2016
63. ## chemistry

I. 1) Calculate the pH of the following solution: 0.1 M HF + 0.2 M NaCN Given: pKa for: HF/F- = 3.2 HCN/CN-= 9.4 2) Calculate the pH of the solution that results upon mixing 20.0 mL of 0.2000 M HCI with 25.0 mL of: a) distilled water c) 0.13 MNaOH e) 0.23

asked by abd on February 18, 2013
64. ## chemistry

assuming the density of a 5% acetic acid solution is 1.0g/ml, determine the volume of the acetic acid solution necessary to neutralize 25.0 ml of 0.10 m NaOH. also record this calculation on your report sheet.

asked by janvi on October 22, 2009
65. ## chemistry

a sulphuric acid solution contains 66% H2SO4 by weight and has the density of 1.58 gmL^-1 . how many moles of the acid are present in 1.00L of the solution. Molar mass for H2SO4 is 98.09 gmol^-1

asked by Anonymous on June 10, 2019
66. ## chemistry

Determine the of mole of water molecules in one mole of a sample of an iron containing (nh4)2so4. FeSO4. nH2O. titrate a solution of the iron containg (solution Y)

asked by fiona on December 3, 2011
67. ## Chemistry

A solution contains 1.4 * 10^−5 mol of KBr and 0.14 mol of KCl per liter. AgNO3 is gradually added to this solution. Which forms first, solid AgBr or solid AgCl? Or do they co-precipitate?

asked by Anon on March 28, 2018
68. ## chemistry

I was given the following problem: what is the normality of a solution containing 6 grams of H2SO4 in a 200ml solution? my teacher obtained a normality of 39normals while I took into account that I had two hydrogen free and obtained a result of 0.6 N,

asked by Paul on June 2, 2016
69. ## Chemistyr

A 55.29-g sample of Ba(OH)2 is dissolved in enough water to make 1.20 L of solution. How many milliliters of this solution must be diluted with water in order to make 1.00 L of 0.100 M Ba(OH)2? (Ignore significant figures for this problem.)

asked by Andy on September 28, 2014
70. ## Chemistry

What volume (mL) of a concentrated solution of sodium hydroxide (2.00 M) must be diluted to 600.0 mL to make a 0.860 M solution of sodium hydroxide? Express your answer to the nearest tenth mL.

asked by Camarra on March 10, 2010
71. ## Algebra

A chemical manufacturer wishes to fill an order for 700 gallons of a 24% acid solution. Solutions of 20% and 30% are in stock. How many gallons of 20% acid solution will be used in the desired mixture?

asked by Anonymous on November 8, 2016
72. ## science

A student prepared a .10M solution of acidic acid. Acidic acid has a Ka of 1.75 x 10-3. What are the hydronium ion concentration and the PH of the solution? I think the PH is 1.76 because I hit -log(1.75 x 10-3) on my calculator and that's what I got

asked by Jodi on March 21, 2007
73. ## chemistry

A sample of 7.83 grams of NaOH is dissolved into 620 mL of aqueous 0.250 M NaOH (as- sume no volume change). This solution is then poured into 1.67 gallons of water. (You may assume that the two volumes can be added.) What is the concentration of NaOH in

asked by Anonymous on September 6, 2010
74. ## Science

Can you please help me solve this lab: Design an item no bigger than a 35 mm film conatiner that will float at the 400 ml mark in a 1000 mL graduated cyllinder with 800 mL of water in it. The item can only be made from "trash", recycled items and common

asked by Courtney on January 1, 2007
75. ## chemistry

2. A solution of I2 was standardized with ascorbic acid. Using a 0.1000-g sample of pure ascorbic acid, 25.32 mL of I2 were required to reach the starch end point. a) What is the molarity of the iodine solution?

asked by alexander on January 27, 2015
76. ## chemistry

What is the concentration of a potassium iodate solution after you complete the following porcedure? Pipette 10 mL of a 0.31 M potassium iodate stock solution to a 100-mL volumetric flask and then add water to the mark.

asked by wallace on November 6, 2018
77. ## Chemistry

A 6.00 M H2SO4 solution has d = 1.34 g/mL. What is the mass percent of H2SO4 in this solution? Choose one answer. a. 56.1 b. 43.9 c. 37.0 d. 58.8 When we calculated yesterday the answer was not B. 43.9....I got it wrong and don't know why if the math was

asked by CC on February 10, 2010
78. ## Chemistry

A 23.16 ml volume of an H2A acid solution of unknown concentration with 2 drops of phenolphthalein required 14.24 ml of 0.135 M NaOH to reach the endpoint. What is the molar concentration of the acid solution?

asked by Joy on October 24, 2013
79. ## Chemistry

An aqueous antifreeze solution is 40.0% ethylene glycol (C2H6O2) by mass. The density of the solution is 1.05 g/cm3. Calculate the molality, molarity, and mole fraction of the ethylene glycol.

asked by Sarah on January 21, 2011
80. ## Chemistry

An aqueous sugar solution is formed by adding 50.1 g sucrose (C12H22O11) to 200.0 g water. What is the boiling point (in Celsius) of this sugar solution (this is NOT the ΔTb). Kb H2O = 0.51 Celsius/m

asked by amy on February 24, 2012
81. ## Chemistry

What volume (in mL) of a 0.300 M HNO3 solution will completely react with 43.9 mL of a 0.146 M Na2CO3 solution according to this balanced chemical equation? Na2CO3(aq)+2 HNO3(aq)->2 NaNO3(aq)+CO2(g)+H20(l)

asked by Connor Smith on November 9, 2015
82. ## Chemistry

What volume (in mL) of a 0.300 M HNO3 solution will completely react with 43.9 mL of a 0.146 M Na2CO3 solution according to this balanced chemical equation? Na2CO3(aq)+2 HNO3(aq)->2 NaNO3(aq)+CO2(g)+H20(l)

asked by Connor Smith on November 9, 2015
83. ## Chemistry

What volume (in mL) of a 0.300 M HNO3 solution will completely react with 43.9 mL of a 0.146 M Na2CO3 solution according to this balanced chemical equation? Na2CO3(aq)+2 HNO3(aq)->2 NaNO3(aq)+CO2(g)+H20(l)

asked by Connor Smith on November 9, 2015
84. ## Chemistry

If 50.0mL of 1.60M HCl was added to 50.0mL of 1.80M NaOH, calculate the molarity of the resulting NaCl solution. (Hint: resulting solution has a volume of 100 mL)

asked by Michelle on April 1, 2010
85. ## Chemistry

determine the pH of a solution made by mixing 8 ml of 1.10M acetic acid and 2ml 0.9 M sodium acetate solution. pKa for acetic acid CH3COOH is 4.745. Can someone please explain

asked by Max on June 12, 2011
86. ## Chemistry

(Qualitative Analysis) I know this is vague, but if i had a solution of unknown cations that appear light purple, what could be the possible list of cations in the solution? I thought Mn, Ag, Cu after doing my own tests, but i am uncertain. Just on a

asked by Kevin on November 7, 2011
87. ## Chemistry

A solution is made by dissolving 0.624 mol of nonelectrolyte solute in 795 g of benzene. Calculate the freezing point and boiling point of the solution. Tf=_ˆC Tb=_ˆC

asked by Tanner on April 29, 2013
88. ## chemistry

75.0 mL of a 1.50 M solution is diluted to a total volume of 278 mL. A 139-mL portion of that solution is diluted by adding 139 mL of water. What is the final concentration? Assume the volumes are additive.

asked by tia on October 14, 2016
89. ## physics

A laser beam passes from air into a 25% glucose solution at an incident angle of 37 ∘ . In what direction does light travel in the glucose solution? Assume the index of refraction of air is n = 1.

asked by james on March 27, 2016
90. ## Chemistry

Determine the sulfate ion concentration in a solution prepared by diluting 15.00mL of a 0.200M aluminum sulfate solution with 35.00mL of water. Assume the volumes are additive.

asked by Carley on March 2, 2014
91. ## Attn: DrBob

A household bleach solution contains 5.25% (by mass) NaClO. How many moles of NaClO are needed to make 1000 L of the solution? (density = 1.07g/mL) This is the complete question on my assignment. It's 1000 L.

asked by Staci on March 26, 2010
92. ## science

Is a gelatin dessert a solution, a suspension or a colloid? I think it is a suspension. Thanks you. The ingredients of gelatin are completely soluble in water and the end product is clear and transparent. It is a solution, in my opinion.

asked by Cynthia on June 10, 2007
93. ## Chemistry

A 0.25 M CuSO4 solution is required. A student is given 60 grams of copper sulphate. Calculate the volume of water needed to dissolve copper sulphate crystals and make this solution.

asked by Wendy Mark on April 22, 2019
94. ## Chemistry

A 5.55g sample of a weak acid with Ka=1.3 x10^-4 was combined with 5.00 mL of 6.00 M NaOH and the resulting solution was diluted to 750 mL. The measured pH of the solution was 4.25. What is the molar mass of the weak acid?

asked by Trista Nigh on April 23, 2011
95. ## Chemistry

Help needed on a homework problem - solution of HCN and CN- , Ka 6.2x10^-10 . Is this a buffered solution? Shouldn't the pH be greater than 7, and [OH] >[H]? Does adding a strong acid have more effect than adding a strong base? Thanks.

asked by Laura on April 25, 2010
96. ## Chem

a blue solution of copper(II) sulfate is mixed with a colerless solution of sodium phosphate and a blue percipitate is formed. Using solubility rules predict the formula of the percipitate

asked by Jessica on July 6, 2011
97. ## Chemistry

What should the molar concentrations of benzoic acid and sodium benzoate be in a solution that is buffered at a pH of 4.75 and has a freezing point of -2.0 ∘C? (Assume complete dissociation of sodium benzoate and a density of 1.01 g/mL for the solution.)

asked by Albert on March 29, 2017
98. ## Chemistry

How many grams of CaCl2 * 6H2O are required to make 500 milliliters of a solution having the same concentration of Cl- as one that was prepared by dissolving 75.6 grams of NaCl in enough water to make exactly 1 liter of solution?

asked by Anonymous on January 20, 2015
99. ## chemistry

If chlorine gas is bubbled through an aqueous solution of sodium iodide, the result is elemental iodine and aqueous sodium chloride solution. What kind of reaction took place?

asked by LDonta on July 3, 2013
100. ## Chemistry

What should the molar concentrations of benzoic acid and sodium benzoate be in a solution that is buffered at a pH of 4.84 and has a freezing point of -2.0 ∘C? (Assume complete dissociation of sodium benzoate and a density of 1.01 g/mL for the solution.)

asked by B on April 14, 2019