1. Chemistry

    If 118 g of ice at 0.0°C is added to 1.55 L of water at 88°C, what is the final temperature of the mixture?

    asked by Sam on May 11, 2011
  2. Chemistry

    How much ice (in grams) be added to lower the temperature of 355 mL of water from 25 ∘C to 5 ∘C ? (Assume the following: the density of water is 1.0 g/mL, the ice is at 0 ∘C, the heat of fusion of ice is 6.02 kJ/mol, and the volume of water produced

    asked by Anonymous on January 19, 2017
  3. college chemistry

    Dry ice is solid carbon dioxide. Instead of melting, solid carbon dioxide sublimes according to the following equation: CO2(s)--> CO2(g). When dry ice is added to warm water, heat from the water causes the dry ice to sublime more quickly. The evaporating

    asked by Eddie on November 9, 2009
  4. physics

    A 40-g block of ice is cooled to −71°C and is then added to 590 g of water in an 80-g copper calorimeter at a temperature of 27°C. Determine the final temperature of the system consisting of the ice, water, and calorimeter. (If not all the ice melts,

    asked by kevin on April 6, 2012
  5. physics

    A 40-g block of ice is cooled to −71°C and is then added to 590 g of water in an 80-g copper calorimeter at a temperature of 27°C. Determine the final temperature of the system consisting of the ice, water, and calorimeter. (If not all the ice melts,

    asked by anthony on April 11, 2012
  6. Chemistry

    A quantity of ice at 0.0°C was added to 25.6 g of water at 21.0°C to give water at 0.0°C. How much ice was added? The heat of fusion of water is 6.01 kJ/mol and the specific heat is 4.18 J/(g · °C). I don't understand how to set this problem up (what

    asked by Ryan on October 8, 2008
  7. Chemistry

    A quantity of ice at 0.0°C was added to 25.6 g of water at 21.0°C to give water at 0.0°C. How much ice was added? The heat of fusion of water is 6.01 kJ/mol and the specific heat is 4.18 J/(g · °C). I don't understand how to set this problem up (what

    asked by Ryan on October 8, 2008
  8. Physics

    50 grams of ice cubes at -5oC is added to a 1 litre (1 kg) of water that is initially at 30oC. a) Use the table of values to find the energy needed to melt the ice:(energy to raise the temperature of the ice to 0oC+ change the state of the ice to water) b)

    asked by Ying on January 25, 2015
  9. Physics

    Ice at 0°C is added to 200gms of water initially at 70°C in a vacuum flask. When 50gms of ice has been added and has all melted the temperature of the flask and the contents become 40°C. When 80gms of ice has been added and has all melted the

    asked by Guava on December 23, 2018
  10. had

    A 0.106 kg ice cube is taken out of a freezer with temperature -16°C. It is then added to a glass of water with mass 0.25 kg. The water initially has a temperature of 24.2 °C. Assume no heat is added or lost to the surroundings. Calculate the amount heat

    asked by Anonymous on March 3, 2014
  11. college

    A quantity of ice at 0°C is added to 65.0 g of water in a glass at 55°C. After the ice melted, the temperature of the water in the glass was 15°C. How much ice was added? The heat of fusion of water is 6.01 kJ/mol and the specific heat is 4.18

    asked by Anonymous on July 14, 2010
  12. physics

    Ice is added to 0.75 L of water at 20°C to make very cold water at 0°C. If enough 0°C ice is added so that the mixture becomes all liquid, how much liquid is in the pitcher when this occurs? Density of water = 1.00 x 103 kg/m3.

    asked by jan on February 3, 2016
  13. physics

    A 50g ice cube is added to 110g of water in a 62g aluminum cup. The water and cup initially have a temperature of 23°C. Find the initial temperature of the ice cube such that all of the water is just turned to ice. Use the following specific heats: water

    asked by sandhya on June 29, 2010
  14. Physics

    A Styrofoam bucket of negligible mass contains 1.75 kg of water and 0.450 kg of ice. More ice, from a refrigerator at -15.0∘C, is added to the mixture in the bucket, and when thermal equilibrium has been reached, the total mass of ice in the bucket is

    asked by Jen on February 1, 2016
  15. Physics

    A Styrofoam bucket of negligible mass contains 1.75 kg of water and 0.450 kg of ice. More ice, from a refrigerator at -15.0 ∘C, is added to the mixture in the bucket, and when thermal equilibrium has been reached, the total mass of ice in the bucket is

    asked by Marthin on January 17, 2018
  16. Physics help!!

    A Styrofoam bucket of negligible mass contains 1.60 kg of water and 0.425 kg of ice. More ice, from a refrigerator at -14.8 degree C, is added to the mixture in the bucket, and when thermal equilibrium has been reached, the total mass of ice in the bucket

    asked by Joey on April 16, 2012
  17. Physics help!!

    A Styrofoam bucket of negligible mass contains 1.60 kg of water and 0.425 kg of ice. More ice, from a refrigerator at -14.8 degree C, is added to the mixture in the bucket, and when thermal equilibrium has been reached, the total mass of ice in the bucket

    asked by Joey on April 16, 2012
  18. Chemistry

    A quantity of ice at 0.0 °C was added to 33.6 g of water at 45.0 °C to give water at 0.0 °C. How much ice was added? The heat of fusion of water is 6.01 kJ/mol, and the specific heat is 4.18 J/(g•°C).

    asked by Zach on January 26, 2015
  19. Chemistry

    A quantity of ice at 0.0°C was added to 25.0 g of water at 21.0°C to give water at 0.0°C. How much ice was added? The heat of fusion of water is 6.01 kJ/mol and the specific heat is 4.18 J/(g · °C). _g

    asked by jessica on January 28, 2012
  20. Physics

    An amt of ice was added to a 8.25 kg tubof water at 25.0°C. If their final temp is 18.2, what mass of ice was added? Please help, I keep getting the wrong answer

    asked by HELP PLEASE ASAP on June 3, 2015
  21. Chemistry

    Suppose that 100.0 g of ice a 0 degreesC are added to 300.0 g of water at 25.0 degrees . Is this sufficient ice to lower the temperature of water to 5.00 degrees C and still have ice remaining? Calculate the energy (heat) which must be removed from water

    asked by Sage on February 24, 2016
  22. physics

    1,500J of heat energy is added to ice water and it causes the water temperature to rise by 4°C (not 40°C).what is the Mass of the ice water?

    asked by Shane Kippex Teio on April 6, 2017
  23. College Physics

    Dry Ice. At standard atmospheric pressure, the solid form of carbon dioxide called “dry ice” undergoes a phase change not to a liquid but straight to a gas. This process is called sublimation, and like other phase transitions heat energy is required.

    asked by Anon on November 30, 2011
  24. Physics

    An ice cube tray of negligible mass contains 375 g of ice at -5.00 C. What minimum amount of heat must be added to make all the ice into water?

    asked by Sophia on April 10, 2017
  25. Physics

    If a cup is half full of ice, how long will it take to melt the ice in a microwave oven (1000 W) set on high? Also, if you did the above but added 100ml of ice cold water to the ice would this change the results of melt time?

    asked by Mary on June 23, 2009
  26. Chemistry

    A quantity of ice at 0.0 degrees C was added to 33.6 of water at 21.0 degree C to give water at 0.0 degrees C. How much ice was added? The heat of fusion of water is 6.01 kJ/mol and the specific heat is 4.18 J/(g * degrees C)

    asked by Lauren on February 1, 2008
  27. Chem

    Consider a glass of 277 mL of water at 25°C. Calculate the mass of ice at -15°C that must be added to cool the water to 10°C after thermal equilibrium is achieved. To find the mass of water use the density of water = 1.0 g/mL. I have no idea how to

    asked by Don on February 1, 2011
  28. Physics

    A 100g piece of ice at 0 degrees celcius is placed into a container holding 200g of water, initially at temperature 25 degrees celcius. Heat flows from the water to the ice, cooling the water and melting the ice. Calculate a) how many moles of ice and how

    asked by Betty on November 4, 2015
  29. phy

    2 kg of water at 5 celsius is added to ice at 0 celsius. The ice and water make up a closed system. Calculate how much of the ice melts

    asked by brandy on December 4, 2010
  30. science

    A 51-g piece of ice at 0 C is added to a sample of water at 7-C all of the ice melts and the temp of the water decreases to 0 .If you used the 8200 Khan you expand in energy in one day to heat 47000g of water at 27-C what would be the rise in temp? What

    asked by tabitha on June 15, 2012
  31. Science

    Ice at 0 degree celcuis is added to 200g of water initially at 70 degree celcuis in a vacuum flask.When 50g of ice has been added and has all melted the temperature of the flask and contents is 40 degree celcuis.When a further 80g of ice has been added and

    asked by David on January 8, 2016
  32. physics

    A 0.299-m-thick sheet of ice covers a lake. The air temperature at the ice surface is -15.0 °C. In 4.90 minutes, the ice thickens by a small amount. Assume that no heat flows from the ground below into the water and that the added ice is very thin

    asked by anonymous on April 18, 2012
  33. physics 10

    1.) 100 kJ of heat is added to 600g of zinc at 20 C and 75g of it melts. If the specific heat of zinc is 0.385 kJ/kg-C and it melts at 420 C. What is its heat of fusion? 2.) If all the heat lost by 1kg of water at 0 C when it turns into ice at 0 C could be

    asked by ella on March 15, 2015
  34. Chemistry- Dr. Bob222

    What is the final temperature and state of water when 8.50 kJ of energy is added to 10.0 g of ice at 0 degree Celsius. Helpful information: Cs (ice)= 2.1 J/g•C Heat of vaporization (water)= 40.7kJ/mol Ca (water)= 4.184 J/g•C Heat of fusion (water)=

    asked by Anonymous on February 13, 2016
  35. Chemistry

    What is the final temperature and state of water when 8.50 kJ of energy is added to 10.0 g of ice at 0 degree Celsius. Helpful information: Cs (ice)= 2.1 J/g•C Heat of vaporization (water)= 40.7kJ/mol Ca (water)= 4.184 J/g•C Heat of fusion (water)=

    asked by Neveah on February 12, 2016
  36. Physics

    Suppose 100 g of water at 20°C is poured over a 70-g cube of ice with a temperature of -8°C. If all the ice melts, what is the final temperature of the water? If all of the ice does not melt, how much ice remains when the water–ice mixture reaches

    asked by James on July 19, 2012
  37. Physics

    How many kg of ice needs to be added to 1.31 kg of water at 64.9°C to cool the water to 14.9°C when the Latent heat of ice = 80 kcal/kg?

    asked by Steve on May 8, 2015
  38. physics

    A 5-g ice cube at ?4°C is dropped into 60 g of water at 40°C. (For the following problems, use the specific heats in this table and the numerical data found in this table.) (a) After enough time has passed to allow the ice cube and water to come into

    asked by lanre on July 26, 2012
  39. Chemistry

    A 100g sample of ice at 0ºC is added to 150.0 mL of liquid water at 80ºC in a styrofoam cup calorimeter. (The specific heat capacity of water is 1.184 J/g•ºC, the density of water is 1.00 g/mL, and ∆Hºfus = 6.01 kJ/mol) a) Does all of the ice

    asked by Lauren on November 5, 2012
  40. chemistry

    Suppose you add a small ice cube to room temperature water in a coffee cup calorimeter. What is the final temperature when all the ice is melted? Assume that you have 200.0 mL of water at 25.0 degrees Celsius and the ice cube weighs 15.0 g and is at 0.0

    asked by Jason on October 10, 2014
  41. chemistry

    A 49g piece of ice at 0.0C is added to a sample of water at 9.0C. All of the ice melts and the temperature of the water decreases to 0.0C . How many grams of water were in the sample?

    asked by steph on September 9, 2011
  42. Chemistry

    what is the minimum mass of ice at 0.0C that must be added to 1.00kg of water to cool the water from 25.0C to 12.0C. the heat of fusion is 333J/g; specific heat capacities of ice = 2.06J/gK; the heat capacity of water is 4.184J/gK. I have no clue where to

    asked by Michala on October 13, 2015
  43. chemistry

    What amount of ice must be added to 540.0 g of water at 25.0 °C to cool the water to 0.0 °C and have no ice

    asked by KO on November 17, 2016
  44. Chemistry

    A 70 piece of ice at 0 is added to a sample of water at 6. All of the ice melts and the temperature of the water decreases to 0. How many grams of water were in the sample?

    asked by Sherice on September 8, 2012
  45. college chemistry

    a 42 piece of ice at 0.0 C is added to a sample of water at 8.0 C. all of the ice melts and the temperature of the water decreases to 0.0 C. how many grams of water were in the sample.

    asked by Linda on January 30, 2014
  46. chemistry

    a 42 piece of ice at 0.0 C is added to a sample of water at 8.0 C. all of the ice melts and the temperature of the water decreases to 0.0 C. how many grams of water were in the sample.

    asked by Linda on January 30, 2014
  47. Chemistry

    A 50.0- piece of ice at 0.0 is added to a sample of water at 8.0. All of the ice melts and the temperature of the water decreases to 0.0. How many kilograms of water were in the sample?

    asked by Cassie on May 25, 2011
  48. Math to Ms.Sue (urgent )

    11.   Lorenzo has a checkbook balance of $118.00. He writes two checks, one for $9.00 and one for $84.25. He then deposits $95.00. Finally, he uses his calculator to determine his new balance. Which one of the following series represents the correct

    asked by Sarah on January 16, 2015
  49. Chemistry

    A 24.0 g sample of ice at -19.0°C is mixed with 118.0 g of water at 85.0°C. Calculate the final temperature of the mixture assuming no heat loss to the surroundings. The heat capacities of H2O(s) and H2O(l) are 2.08 and 4.18 J/g°C, respectively, and the

    asked by Rachelle on November 28, 2008
  50. science

    Ice at 0 degree celcuis is added to 200g of water initially at 70 degree celcuis in a vacuum flask.When 50g of ice has been added and has all melted the temperature of the flask and contents is 40 degree Celsius when a further 80gm of ice has been added

    asked by Pushpendra Kushwah on February 7, 2019
  51. General Chemistry II

    A quantity of ice at 0 degrees celcius is added to 64.3 grams of water in a glass at 55 degrees celcius. After the ice melted, the temperature of the water in the glass was 15 degrees celcius. How much ice was added? The heat of fusion of water is

    asked by LeAnna on January 20, 2011
  52. Chemistry-DrBob222

    What is the final temperature and physical state if water when 47.50 kJ of energy is added to 15.0 g of ice at -10.0 C? Helpful information: Cs (ice) = 2.1 J/g C Heat of fusion (water) = 6.02 kJ/mol Cs (water) = 4.184 J/g C Heat of vaporization (water) =

    asked by Nevaeh on March 12, 2016
  53. physics

    An ice cube of mass 0.200 kg melts at 0.0°C, and then the melt water is heated to How much heat was added to the ice cube? For water and Lv = 2257 kJ/kg. The specific heat capacity of water is 4.19 kJ/kg ∙ °C.

    asked by Anonymous on September 4, 2015
  54. Chemistry

    A 55.0-g piece of ice at 0.0 is added to a sample of water at 8.0. All of the ice melts and the temperature of the water decreases to 0.0. How many kg of water were in the sample?

    asked by Steve on February 6, 2012
  55. physics

    Suppose 300 g of water at 20°C is poured over a 50-g cube of ice with a temperature of -6°C. If all the ice melts, what is the final temperature of the water? If all of the ice does not melt, how much ice remains when the water–ice mixture reaches

    asked by lanre on July 26, 2012
  56. Physics

    3. A calorimeter has a mass of 100g and a specific heat of 0.900 cal/g˚C and contains 400g of water at 40˚C. When 91g of ice at 0.0˚C is added and completely melted, the temperature of the water is 18.2˚C. Calculate the heat fusion of the ice

    asked by Mark jay on April 20, 2017
  57. chemistry

    a 52g piece of ice at 0 degree is added to a sample of water at 6 degree all the ice melts and the temp of the water decreases to 0 degrees how many grams of water were in the sample?

    asked by brenda on September 17, 2011
  58. physics

    0.1kg of ice initially at a temperature of -10 degrees Celsius is added to a cup with .5kg of water initially at 20 degrees Celsius. The water and ice are isolated thermally from their surroundings. The specific heat of ice is 2000 J/kgoC, the specific

    asked by Raquel on November 17, 2010
  59. Physics

    A 6-g ice cube at −8°C is dropped into 70 g of water at 31°C. (a) After enough time has passed to allow the ice cube and water to come into equilibrium, what is the temperature of the water? (b) If a second ice cube is added, what will the temperature

    asked by Vladimir on July 20, 2012
  60. physics

    134 g of water at 7°C is added to ice at 0°C. If the final temperature of the system (which you can assume is isolated) is 0°C, determine HOW MUCH ICE MELTED. The specific heat of water is 4186 J/kg·°C. The latent heat of fusion for H2O is 335,000

    asked by Joseph on November 14, 2012
  61. Chemistry

    When preparing home-made ice cream, salt is added to the ice-water mixture. What is its function and why does it work?

    asked by teetee on March 8, 2012
  62. Chemistry

    A 1 kg block of ice, at 0.0 celcius is added to a picnic cooler. How much heat will the ice remove as it melts into water at 0.0celcius?

    asked by Laurie on March 22, 2012
  63. physic

    A 0.20 kg ice cube at 0.0° C has sufficient heat added to it to cause total melting, and the resulting water is heated to70deg.Cel. > How much heat is added? (For water Lf=334kj/kg > andLv=2257kj/kg >

    asked by kristin on July 24, 2010
  64. Physics/chem

    Trying to beat the heat of summer, a physics grad student went to the local toy store and purchased a child's plastic swimming pool. Upon returning home, he filled it with 154 liters of water at 25°C. Realizing that the water would probably not be cool

    asked by BG on November 20, 2010
  65. Chemistry

    A quantity of ice at 0.0 degrees C was added to 33.6 of water at 21.0 degree C to give water at 0.0 degrees C. How much ice was added? The heat of fusion of water is 6.01 kJ/mol and the specific heat is 4.18 J/(g * degrees C) q = mass x specific heat x

    asked by Lauren on February 4, 2008
  66. Physics

    Inside an insulated container, a 250-g ice cube at 0°C is added to 200 g of water at 18°C. (i) What is the final temperature of the system? (ii) What is the remaining ice mass?

    asked by Meder on April 27, 2013
  67. Chemistry

    What two components gain heat when ice is added to water? Express it mathematically. (use appropriate symbols, not your actual numerical values. - I know that the ice gains heat as well as the H2O from the ice, but i don't understand how to express it in

    asked by Anonymous on February 28, 2010
  68. chemestry

    a 40g piece of ice at 0.0 degrees C is added to a sample of water at 8.0 degrees C. the ice melts and the temp of the water decreses to 0.0 degrees C. how many kilograms of water weere in the sample?

    asked by jessie on December 16, 2012
  69. Chemistry

    A quantity of ice at 0.0 degrees C was added to 33.6 of water at 21.0 degree C to give water at 0.0 degrees C. How much ice was added? The heat of fusion of water is 6.01 kJ/mol and the specific heat is 4.18 J/(g * degrees C) q = mass x specific heat x

    asked by Lauren on February 4, 2008
  70. Chemistry

    What is the minimum amount of ice (at 0 degress C) that must be added to 250mL of water at 23 degrees C in order to cool it to 0 degrees celsius? (Density of water= .98 g/cm^3; heat of fusion= 333J/g; heat capacity of water= 4.184J/g C; and heat capacity

    asked by Kayla on April 3, 2011
  71. chemistry

    Couze The water in the buket has some energy (tempreture) it is absorbed by the water and the ice melts this way water cools...now if you consider the ice outside the bucket water will no longer be in tuch with ice ,since energy of water since must be

    asked by Rupali on September 14, 2010
  72. science

    which of the following is the best reason salt is sometimes spread on icy highways? 1) when a car drives on the ice, the firstion created between the salt and the ice produces heat that melts the ice. 2)when salt chemically reacts with the water, the heat

    asked by kayci on May 12, 2010
  73. Chemistry

    Use the heating curve of 50 g of water and the list of values to answer the question. specific heat of ice = 2.10 J/(g·°C) specific heat of water = 4.18 J/(g·°C) specific heat of water vapor = 2.07 J/(g·°C) latent heat of fusion of ice = 333.4 J/g

    asked by Summer on March 15, 2018
  74. Physics

    3. The quantity 0.850kg of ice at -20 degrees Celsius is added to 1.100kg of water in an aluminum Calorimetry cup at 7 degrees Celsius. The mass of the Calorimetry cup is 0.250kg. Use your knowledge of specific heats and latent heats to determine the

    asked by Dawna on January 22, 2013
  75. science

    a glass is partially filled with water. Five ice cubes are placed in the glass, causing the level of the water to reach the rim of the glass. Which of the following statments best explains the increase in water level? A)The volume of the sumerged ice is

    asked by polly on March 2, 2008
  76. Chemistry - DrBob PLEASE

    A glass of ice water was made by adding six 25 g ice cubes to one liter of water. If the water was initially 25C and the ice cubes were initially at -15C, what is the final temperature of the ice water? (I don't know how to get it.)

    asked by Jessica on May 23, 2011
  77. science

    a glass is partially filled with water. Five ice cubes are placed in the glass, causing the level of the water to reach the rim of the glass. Which of the following statments best explains the increase in water level? A)The volume of the sumerged ice is

    asked by polly on March 2, 2008
  78. Chem

    If 3.20 kcal of heat is added to 1.00 kg of ice at 0 degrees C, how much water at 0 degrees C is produced, and how much ice remains? Could someone post the answer n the equation?

    asked by Anonymous on May 18, 2010
  79. chemistry

    An ice cube weighing 22.7 g at a temperature of 0.0°C is added to 125 mL of water at 27.1°C in an insulated container. What will be the final temperature after the ice has melted?

    asked by Bob on February 22, 2015
  80. chem

    .You have an ice cube that is 150 g and is at a temperature of 0°C. You drop the ice into water that is initially at 15ºC and the ice melts. As a result, the water cools of by exactly 1ºC to become 14ºC. How much water was there? In other words, what

    asked by chuck on September 12, 2012
  81. Chemistry

    I've seen the posts on solving this particular equation, and I know the answer is right in front of me. I'm still having trouble understanding why... a 42g piece of ice at 0.0 degrees C is added to a sample of water at 7.8 degrees C. All the ice melts and

    asked by Elliott on September 22, 2012
  82. Chemistry

    A rock salt NaCl ice and water mixture is used to cool milk and cream to make homemade ice cream. How many grams of rock salt must be added to water to lower the freezing point 10.0C?

    asked by Laverne on February 10, 2010
  83. Chemistry

    A glass of ice water was made by adding six 25 g ice cubes to one liter of water. If the water was initially 25C and the ice cubes were initially at -15C, what is the final temperature of the ice water?

    asked by Mark on May 20, 2011
  84. Chemistry

    A glass of ice water was made by adding six 25 g ice cubes to one liter of water. If the water was initially 25C and the ice cubes were initially at -15C, what is the final temperature of the ice water?

    asked by Jessica on May 23, 2011
  85. physics

    A 5-kg block of ice is at a temperature of -27 °C. How much heat must be added to the ice to produce 5 kg of liquid water with a final temperature of 35 oC?

    asked by franko on July 29, 2013
  86. Chemistry

    When ice at 0°C melts to liquid water at 0°C, it absorbs 0.334 kJ of heat per gram. Suppose the heat needed to melt 30.7 g of ice is absorbed from the water contained in a glass. If this water has a mass of 0.189 kg and a temperature of 21.0°C, what is

    asked by Lance on June 7, 2011
  87. Chemistry - Energy: Phase Changes

    If 13.4 kJ of energy are added to 1.00 kg of ice at 0 degrees Celsius, how much water at 0 degrees Celsius is produced? How much ice is left? The molar heat of melting is 6.01 kJ/mol. So... 6.01 kJ -> 1 mol (6.01 kJ of energy can melt 1 mole of ice)

    asked by Kid on November 12, 2015
  88. physics

    A 1.3- block of ice is initially at a temperature of -3.5. If 6.6×105 of heat are added to the ice, what is the final temperature of the system? Find the amount of ice, if any, that remains. Suppose the amount of heat added to the ice block is doubled. By

    asked by katelyn on November 22, 2010
  89. physics

    A rectangular block of ice 10 m on each side and 1.1 m thick floats in sea water. The density of the sea water is 1025 kg/m3. The density of ice is 917 kg/m3. a) How high does the top of the ice block float above the water level? m * .116 OK HELP: Use

    asked by Sarah on November 8, 2010
  90. science

    Which provides more cooling for a Styrofoam cooler, one with 10lb of ice at 0C or one with 10lb of ice water at 0C? Explain your reasoning. 10# ice requires heat to melt the ice + heat to heat the water after it melts. 10# ice water requires heat to heat

    asked by patrick on February 17, 2007
  91. Chemistry

    If a piece of metal at -20 degrees Celsius is added to an ice and water mixutre in equilibrium at 0 degrees Celsius, which of the following statements is true??? ( Note more than one can be correct) I. the amount of ice will increase II. the amount of

    asked by John on April 22, 2007
  92. Chemistry

    If a piece of metal at -20 degrees Celsius is added to an ice and water mixutre in equilibrium at 0 degrees Celsius, which of the following statements is true??? ( Note more than one can be correct) I. the amount of ice will increase II. the amount of

    asked by John on April 22, 2007
  93. Chemistry

    A 62g piece of ice at 0 degrees celcius is added to a sample of water at 9 degrees celcius. All of the ice melts and the temperature of the water decreases to 0 degrees celcius. How many grams of water were in the sample

    asked by Lisa on February 17, 2013
  94. chemistry

    Consider a glass of 294 mL of water at 29°C. Calculate the mass of ice at -15°C that must be added to cool the water to 10°C after thermal equilibrium is achieved

    asked by Eric on February 2, 2010
  95. physics

    If 0.055 kg of ice at 0 ∘C is added to 0.330 kg of water at 32 ∘C in a 0.100-kg aluminum calorimeter cup, what is the final temperature of the water?

    asked by noel on November 27, 2015
  96. chemistry

    The molar heat of fusion for water is 6.01 kJ/mol. How much energy must be added to a 75.0-g block of ice at 0°C to change it to 75.0 g of liquid water at 0°C? 1.44 kJ 10.18 kJ 12.48 kJ 25.04 kJ

    asked by sean on August 21, 2013
  97. physics

    If 0.060kg of ice at 0 ∘C is added to 0.320kg of water at 25∘C in a 0.150-kg aluminum calorimeter cup, what is the final temperature of the water?

    asked by unknown on January 28, 2015
  98. Physic

    If 0.045 kg of ice at 0 C is added to 0.390 kg of water at 34 C in a 0.150 kg aluminum calorimeter cup, what is the final temperature of the water? Please help!

    asked by Anonymous on May 6, 2011
  99. TO: DrBob222 science help

    1. with respect to ion count, why is water considered to be neutral? 2. How do the number of H+ and OH- ions compare after a.) HI is added to water? b.)KBr is added to water? c.)KOH is added to water? 3. Give the Arrhenius definitions for salts.

    asked by Anonymous on March 20, 2014
  100. TO DrBob222 Science

    1. with respect to ion count, why is water considered to be neutral? 2. How do the number of H+ and OH- ions compare after a.) HI is added to water? b.)KBr is added to water? c.)KOH is added to water? 3. Give the Arrhenius definitions for salts. Thanks :)

    asked by Anonymous on March 20, 2014