1. Chemistry

    I have 93.954 mL of a generic cola solution. The solution contains: Molarity of H++1.005e-7 Molarity of OH- = 1.005e-7 Molarity of Sucrose(aq) = 6.386e-1 Molarity of Dye= 5.322e-3 Calculate the mass percent, molarity, molality and mole fraction.

    asked by Emily on November 3, 2011
  2. Chemistry

    Sorry Dr. Bob, I wsa looking for the Sucrose, not all 16 calculations. Can you help me with the Sucrose? I have 93.954 mL of a generic cola solution. The solution contains: Molarity of H++1.005e-7 Molarity of OH- = 1.005e-7 Molarity of Sucrose(aq) =

    asked by Emily on November 3, 2011
  3. chemistry

    If you add a metal piece to excess acid, what of listed factors below will increase, decrease, or have no impact on how fast a reaction happens? a) lower molarity (concentration) of a solution b) higher molarity (concentration)of a solution c) increase

    asked by K on May 22, 2013
  4. chemistry

    a 230.0ml sample of a 0.275 molarity solution is left on a hot plate over night the folowing morning the solution is 1.5 molarity. what volume of solvent has evaportated from the 0.275 molarity solution?

    asked by kristen on June 21, 2012
  5. chemistry

    a 230.0ml sample of a 0.275 molarity solution is left on a hot plate over night the folowing morning the solution is 1.5 molarity. what volume of solvent has evaportated from the 0.275 molarity solution?

    asked by kristen on June 21, 2012
  6. chemistry

    a 230.0ml sample of a 0.275 molarity solution is left on a hot plate over night the folowing morning the solution is 1.5 molarity. what volume of solvent has evaportated from the 0.275 molarity solution?

    asked by kristen on June 21, 2012
  7. chemistry

    I have this long online lab that I am working on and I am stuck on converting Molarity then ultimately finding the % of phosphoric acid in the cola? There is all of different steps I went through with information but I am going to try to give only the info

    asked by Gweedo8 on July 3, 2009
  8. CHEM

    Mass percent is one way to represent solution concentrations, though not the only one. A common measure of solution concentration is Molarity; moles of solute per liter of solution. Calculate the molarity of vinegar in each sample that you titrated and

    asked by Linda on March 18, 2015
  9. Chemistry (URGENT)

    Calculate the molarity of the Co^2+ ion in each of the solutions 1-5. The new molarity is given by the molarity of the stock solution multiplied by the dilution factor. Solution: Co(NO3)2 Original molarity: 0.160 Dilution #1: none D#2: 12mL to 16mL D#3:

    asked by John on December 15, 2010
  10. Chem

    1. What is the molarity of a copper(II) dihydroxide [Cu(OH)2] solution if 25.25 mL of the solution is titrated to the equivalence point with 36.18 mL of 0.549 M prussic acid [H(CN)]? 2. What volume of a 0.138 M dihydroxyl base solution is needed to

    asked by TK on March 29, 2015
  11. Chemistry

    A solution is created by dissolving 13.0 grams of ammonium chloride in enough water to make 265 mL of solution. How many moles of ammonium chloride are present in the resulting solution? When thinking about the amount of solute present in a solution,

    asked by Onye on March 3, 2018
  12. Chemistry

    What is the molarity of a solution with 3.5mol of CaCl2 in 1.89L of solution What is the molarity of a solution with 16g of CH3OH in 487mL of solution

    asked by Ali on March 4, 2009
  13. Chemistry HW!!!

    1. If I dilute 75 mL of 0.50 M CaF2 solution to a final volume of 375 mL, what will be the molarity of the resulting solution? 2. What will be the final volume of the solution be if I start with a 250 mL of 1.38 M MgCl2 solution to make a solution with a

    asked by Theresa on March 11, 2015
  14. chemistry

    if A(aq) + B(aq) = AB(aq), and the molarity of A in the solution is 0.60 M and the molarity of B in solution is 0.60M, calculate the enthalpy of the reaction, delta Hrxn, for the formation of 1 mole of AB solution.

    asked by alex on November 1, 2010
  15. chemistry

    if A(aq) + B(aq) = AB(aq), and the molarity of A in the solution is 0.60 M and the molarity of B in solution is 0.60M, calculate the enthalpy of the reaction, delta Hrxn, for the formation of 1 mole of AB solution.

    asked by alex on November 1, 2010
  16. Chemistry

    56mL of a stock solution of hydrobromic acid, HBr, is added to 85mL of water, yielding a solution having a pH of 1.0. What was the molarity of the stock solution? I know Molarity = moles of solute/ liters of solution

    asked by Danielle on March 31, 2015
  17. Chem

    I need to calcuted the molarity from this 12.5 g of ethylene glycol antifreeze dissolved in o.100kg of water. Density of solution is 1.0 g/mL I know molarity if mole of solute / L of solution. I am confused on how to find the L of solution. Do I add 12.5

    asked by Please please helppppp!!!!! on February 15, 2013
  18. Science

    I need to calcuted the molarity from this 12.5 g of ethylene glycol antifreeze dissolved in o.100kg of water. Density of solution is 1.0 g/mL I know molarity if mole of solute / L of solution. I am confused on how to find the L of solution. Do I add 12.5

    asked by K on February 15, 2013
  19. Physical Chemistry

    One potential problem with using molarity to express concentration is that molarity is temperature dependent. If you make a 1.000 M solution of aqueous HCl at 25 degrees celsius, what would the molarity of this solution become if the temperature of the

    asked by Matt on September 29, 2017
  20. Chemistry

    What is the molarity of this dichromate solution? A potassium dichromate solution of an unknown molarity was used to titrate a solution of FeSO4 prepared by dissolving a 0.350g of pure iron wire in H2SO4 and reducing the FE3+ produced to FE2+. 36.24 mL of

    asked by ANONYMOUS on December 2, 2012
  21. Chemistry

    You have found that 14.37mL of 0.162M sulfuric acid reacts with exactly 20.00mL of barium hydroxide solution of unknown concentration. What is the molarity of the barium hydroxide solution? Round your answer to 3 decimal places and include units. I know

    asked by Micah on May 31, 2017
  22. chemistry

    a solution is prepared by mixing 1.0 grams of benzen(c6h6) in 100g of water to create a solution total volume of 100ml.calculate the molarity,mass percent,mole fraction and molarity of benzene in the solution

    asked by john on August 26, 2014
  23. chemistry Thank a lot help

    100ml of h2s04 solution having molarity 1M and density 1.5g/ml is mixed with 400ml of water. Calculate final molarity of h2s04 solution if final density 1.25g/ml. 50ml of 20.8% bacl2 and 100ml of 9.8% h2s04 solution are mixed. Molarity of cl ions in the

    asked by Ken on November 22, 2014
  24. Chemistry

    determine the approximate molarity of a solution of NaOH prepared by diluting 10ml of 6M NaOH to a volume of 400 ml. using the solution in the first part, 24.5ml of NaOH solution was required to neutralize 26.4ml of a .150M HCl solution. find the molarity

    asked by Chuck on February 28, 2008
  25. Chemistry

    Calculate the concentration, in molarity, of a solution prepared by adding 9 mL of water to 1 mL of 0.1 M HCl solution. If 2.0 mL of 0.010 M NaOH is mixed with enough water to make the total volume 8 mL, what is the molarity of the resulting solution?

    asked by Nico on October 3, 2011
  26. chemistry

    15.0 mL of an iodine solution of unknown molarity was titrated against a .001 M solution of S2o32-. The blue black iodine-starch complex just disappeared when 20.2 mL of thiosulfate was added. What is the exact molarity of the Ia solution

    asked by chem3a on April 23, 2015
  27. chemistry

    How many grams of O_2(g) are needed to react completely with 3.95 g of H_2(g) according to the following balanced chemical equation: 2H_2(g) + O_2(g)--> 2H_2_O(g) Molarity (M) is the number of moles of a solute per 1 L of solution--> M= (mol solute)/(L

    asked by Kane on October 3, 2017
  28. chemistry

    What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what

    asked by Anonymous on February 10, 2011
  29. chemistry

    What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what

    asked by Anonymous on February 10, 2011
  30. intro to chem

    The molarity of an aqueous solution of potassium hydroxide, KOH, is determined by titration against a 0.197 M HI solution. If 28.4 mL of the base are required to neutralize 18.6 mL of HI, what is the molarity of the KOH solution?

    asked by Meseret on August 13, 2013
  31. Chem

    2. Suppose a chemistry student made 2000. mL of 6.00 M HCl. He accidently spilled half of this solution on the floor. What is the Molarity of HCL left in the beaker? Explain the answer... - for this problem, would I use the eq'N, M1V1=M2V2. 3. What is the

    asked by Lina on January 31, 2017
  32. chemistry

    What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what

    asked by Anonymous on February 10, 2011
  33. CHEMISTRY

    You have been given a sample of unknown molarity. Calculate the molarity of a solution which has been prepared by dissolving 8.75 moles of sodium chloride in enough water to produce a solution of 6.22l. 2. You have a sample which consists of 428g sodium

    asked by David on January 10, 2017
  34. CHEMISTRY URGENT

    1. You have been given a sample of unknown molarity. Calculate the molarity of a solution which has been prepared by dissolving 8.75 moles of sodium chloride in enough water to produce a solution of 6.22l. 2. You have a sample which consists of 428g sodium

    asked by Anonymous on January 9, 2017
  35. Chemistry

    1. You have been given a sample of unknown molarity. Calculate the molarity of a solution which has been prepared by dissolving 8.75 moles of sodium chloride in enough water to produce a solution of 6.22l. 2. You have a sample which consists of 428g sodium

    asked by David on January 10, 2017
  36. chemistry

    Find the molar masses of the following compounds: 1. LiI 2. PbCO4 3. Mg(OH)2 4. (NH4)3PO4 Find the percent composition (percent by mass) of the given element in the following compounds: 1. Fluorine in AgF 2. Hydrogen in glucose (C6H12O6) 3. Oxygen in

    asked by Alex on March 2, 2015
  37. Analytical chem

    SPECTROPHOTOMETRIC ANALYSIS OF STEEL I have a known molarity of KMnO4 solution. It was diluted by a factor of 20. Its absorbance is now 1.18. The length of the path is 1 cm.What is the molarity of the new solution.

    asked by Hannah on July 23, 2013
  38. chemistry

    Neutralization Reaction Molarity Calculations: For example: What is the molarity of a Ca(OH)2 solution if .032 L of the solution is exactly neutralized by .015 of a 0.56 M HCl? How do I solve- I am unsure where to begin.

    asked by Hannah on April 25, 2011
  39. Chemistry

    I'm having trouble with molarity. What is the molarity of a KCl solution made by diluting 75.0 mL of a 0.200 M solution to a final volume of 100.0 mL?

    asked by Madison on November 29, 2010
  40. chemistry structures

    what is the stucture for heptanoic acid i need a to draw it CH3CH2CH2CH2CH2CH2COOH http://en.wikipedia.org/wiki/Enanthic_acid Molarity Calculate the molarity of 9.25 mol HCL in 2.25L of solution. mols/L = Molarity

    asked by kim on April 4, 2007
  41. chemistry

    Predict if a precipitate will form when 20.00 mL of the 50% saturated solution is mixed with 20.00 mL of 0.0100M of the following solutions.? the saturated solution is : BaCO3, it has the Ksp of 5.1 x 10^-9 the solubility is 7.1 x 10^-5 M. I don't know how

    asked by Crystal on February 17, 2015
  42. CHEMISTRY

    You have been given a sample of unknown molarity. Calculate the molarity of a solution which has been prepared by dissolving 8.75 moles of sodium chloride in enough water to produce a solution of 6.22l.

    asked by Jason on January 9, 2017
  43. chemistry help asap please

    You have been given a sample of unknown molarity. Calculate the molarity of a solution which has been prepared by dissolving 8.75 moles of sodium chloride in enough water to produce a solution of 6.22l.

    asked by David on January 9, 2017
  44. Chemistry

    What is the molarity of H2SO4 in a solution prepared by adding 15.0 mL of 6.0 Molarity H2S04 to enough water to make 100.0 mL of solution?

    asked by Andrea on October 5, 2011
  45. chemistry help asap

    Please check these thanks. 1. In a titration, 33.21 mL 0.3020M rubidium hydroxide solution is required to exactly neutralize 20.00 mL hydrofluroic acid solution. What is the molarity of the hydrofluroic acid solution? Answer: 0.502HF 2. A 35.00 mL-sample

    asked by missy on February 6, 2012
  46. chemistry

    If you were to dissolve 14.00 grams of salicylic acid in enough water to make 400.00 mL of solution, what is the molarity of the final solution? i did M = moles/L so .1014 mol/.4000L = .2535 M is this correct?? The next part of the question is Now you take

    asked by jake on September 6, 2009
  47. chemistry

    A STUDENT STUDYING THE FE+3- HSCN equilibrium put into a test tube 10.00ml of 2.00 x 10-3 M Fe(NO3)3 with 10.0 mL of 2.00 x 10-3 M HSCN.THE H+ in the resulting solution was manteined at 0.500.By spectrophotometric analysis of the equilibrium solution, the

    asked by Christina on September 29, 2012
  48. Chemistry

    What is the molarity of Cu2+ in a catalyzed reaction using 3 drops of CuSO4 at .03M in 50.0ml, and what is the molarity of Cu2+ using 6 drops? (Consider the extent of dilution of the 0.1 M CuSO4 solution in preparing the 50 mL reaction solution. Estimate

    asked by Jim on October 3, 2015
  49. Chemistry

    Calculate the molarity of a solution made by dissolving 0.0715 mol Na2SO4 in enough water to form 550 mL of solution. While we're at it... How many milliliters of 10.6 M HCl solution are needed to obtain 0.205 mol of HCl? Also... How many grams of solute

    asked by Alex on September 28, 2010
  50. Food Analysis

    1.If 0.5l of 5M solution of CU(NO3) is diluted to a volume of 0.80l by adding water, what is the molarity of the resulting diluted solution? 2.How many ml of water will be required to dilute 11ml of 0.45Macid solution to a molarity of 0.1M? 3.Calculate the

    asked by Sarah on March 8, 2011
  51. Chemistry

    A solution of 0.316 M KOH is used to neutralize 16.0 mL H3PO4 solution H3PO4(aq) + 3KOH(aq) ¨ K3PO4(aq) + 3H2O(l) If 30.3 mL KOH solution is required to reach the endpoint, what is the molarity of the H3PO4 solution? Molarity = ____________

    asked by LuigiR on November 19, 2015
  52. chemistry

    100ml of h2s04 solution having molarity 1M and density 1.5g/ml is mixed with 400ml of water. Calculate final molarity of h2s04 solution if final density is 1.25g/ml 50ml of 20.8% bacl2 and 100ml of 9.8% h2s04 solutions are mixed. Molarity of cl ions in the

    asked by Ken on November 16, 2014
  53. chemistry

    Finding molarity and molality(best answer)? An aqueous solution is prepared by diluting 3.30 mL acetone,(d= 0.789g/mL) with water to a final volume of 75.0 mL. The density of the solution is 0.993 g/mL. What is the molarity, molality and mole fraction of

    asked by sam on October 7, 2011
  54. Chemistry

    Consider the titration of 50 mL of 0.250 M HCl with 0.1250 M NaOH. Calculate the pH of the resulting solution after the following volumes of Na OH have been added. a) 0.00 mL b) 50.00 mL c) 99.90 mL d) 100.00 mL e) 100.1 mL The question is, I get, for

    asked by George on April 27, 2013
  55. Chem Please HELP

    A 15.0mL sample of an H2SO4 solution is titrated with 24.0 mL of a 0.245 Molarity NaOH solution. What is the molarity of the H2SO4 solution?

    asked by heather on April 21, 2016
  56. Chemistry

    1) If I add 10 grams of salt into 0.1 L of water, what is the molarity of the solution? 2) Serial dilution is a common technique to make low concentration solutions. Each Serial Dilution involves taking half the solution and mixing it with a solvent, to

    asked by Caitlyn on February 18, 2016
  57. chemistry

    In a titration experiment, 22.00mL of a NaOH solution are required to neutralize 24.02 mL of a 0.1094 M HCL solution. what is the molarity of H+ in the HCL solution? (same as the molarity of HCL)

    asked by sari on November 9, 2011
  58. CHECK MY CHEMISTRY WORK PLEASE ASAP

    1. You have been given a sample of unknown molarity. Calculate the molarity of a solution which has been prepared by dissolving 8.75 moles of sodium chloride in enough water to produce a solution of 6.22l. 2. You have a sample which consists of 428g sodium

    asked by David on January 10, 2017
  59. Chemistry (Help)

    0.275gAgNO3 is dissolved in 500mL of solution. a. What is the molarity of this solution. b. If 10.0 mL of this solution are transferred to a flask and diluted to 500mL, what is the concentration of the resulting solution? c. If 10.0mL of the solution in

    asked by Anonymous on November 3, 2015
  60. chemistry need help

    how to determine the molarity of iron (II) acetate solution? design an experiment. Would it be possible to determine the molarity be immersing a material in it then applying another substance ? confused because there is no way to know liters of solution.

    asked by Anonymous on March 26, 2018
  61. chemistry

    A aqueous solution of acetic acid with a density of 1.25 g/ml is 30.0% by mass HC2h3O2 (MM=60.0) Compute the molarity of this solution. I figured out that if you divide 30.0 by the molar mass 60.0g which gives you .5 mol. I cannot seem to figure out what i

    asked by Aimee on February 23, 2009
  62. Chemistry

    The solubility of lead (II) chloride in water is 4.50 g/L at 25 degrees C a. What is the molarity of Pb2+ in a saturated solution b. What is the molarity of Cl- in the solution in the previous problem c. What is the equilibrium constant for the reaction:

    asked by sea lively on August 13, 2018
  63. Chemistry

    A solution is made by mixing 90.6 g of magnesium sulfate heptahydrate with 2320.0 g of water. 690.00 mL of the solution has a mass of 745.20 g. 1. What is the molarity of the magnesium sulfate solution? 2. What is the molarity of the magnesium ion? 3. What

    asked by J on September 11, 2013
  64. chemistry

    A titration of 15.75mL HCL of an unknown molarity requires 20.35mL of 0.0903M NaOH solution. What is the molarity of the HCl solution?

    asked by xx on October 28, 2014
  65. chemistry

    the following titration data were collected: a 10 mL portion of a unknown monoprotic acid solution was titrated with 1.12340 M NaOH and required 23.95 mL of the base solution for neutralization. calculate the molarity of the acid solution calculate the

    asked by Doss on October 25, 2011
  66. ap chemistry

    please explain titration problems. I'm a total noob at this and am trying to answer some prelab questions. Examples: 1. How many mL of a 0.800 M NaOH solution is needed to just neutralize 40 mL of a 0.600 M HCl solution? 2. You wish to determine the

    asked by chris on October 2, 2008
  67. chemistry

    an aqueous solution solution of sodium borate is sometimes used to to fire-proof wood. a. what is the molarity of 2.50 L of solution that contains 1.85 moles of sodium borate? b. what is the molarity of 45.0 L of solution that contains 6.78 kg of sodium

    asked by Jessica on April 7, 2013
  68. chemistry

    The following data were collected at the endpoint of a titration performed to find the molarity of an HCl solution: Volume of acid (HCl) used = 14.4 mL; Volume of base (NaOH) used = 22.4 mL; Molarity of standard base (NaOH) = 0.200 M; What is the molarity

    asked by vin on November 29, 2010
  69. CHEMISTRY

    A STUDENT STUDYING THE FE+3- HSCN equilibrium put into a test tube 10.00ml of 2.00 x 10-3 M Fe(NO3)3 with 10.0 mL of 2.00 x 10-3 M HSCN.THE H+ in the resulting solution was manteined at 0.500.By spectrophotometric analysis of the equilibrium solution, the

    asked by da on September 18, 2011
  70. Chemistry II

    If 15.0 mL of 1.2e-4 mol/L HI is added to 26.0 mL of 9.2e-4 mol/L HI, what is the pH of the solution? M x L = mols. Calculate mols for solution 1, do the same for solution 2, add mols together and divide by total liters. That will be the new molarity. Then

    asked by Jayd on April 24, 2007
  71. Chemistry

    0.0020 mole of HCl is dossolved in water to make a 2000ml solution. Calculate the molarity of the HCl solution, the H30, and the pH. The H30 is the same as the molarity of the HCl solution.

    asked by Susie on December 1, 2010
  72. chemistry(Urgent Please help)

    A student is asked to standardize a solution of barium hydroxide. He weighs out 0.945 g potassium hydrogen phthalate (KHC8H4O4, treat this as a monoprotic acid). It requires 33.9 mL of barium hydroxide to reach the endpoint. A. What is the molarity of the

    asked by Hannah on November 20, 2011
  73. chemistry

    ou weigh out Potassium Permanganate, Mass of KMnO4 (MW=158.034).......... 0.1569 g You dissolve it completely in water.......... 46.00 mL (a) Molarity of MnO4- solution........................... ________________ M You pipet out your UNKNOWN.............

    asked by faruk on July 26, 2013
  74. chemistry

    ou weigh out Potassium Permanganate, Mass of KMnO4 (MW=158.034).......... 0.1569 g You dissolve it completely in water.......... 46.00 mL (a) Molarity of MnO4- solution........................... ________________ M You pipet out your UNKNOWN.............

    asked by faruk on July 27, 2013
  75. Chem

    I'm having a lot of trouble with a simple problem. I have a 3.0% by man solution of H2O2 in H2O. The density of thr solution is 1.0 g/mL. I need to find the molarity. How do I do this? So far I have: 3.0g H2O2 x 1 mol/34.02 g= .0881 mol I'm not sure where

    asked by Christopher on March 23, 2007
  76. Chemistry

    Under an O2(g) pressure of 1.00 atm , 28.31mL of O2 (g) dissolves in 1.00L H2O at 298K. What will be the molarity of O2 in the saturated solution at 298K when the pressure is 3.86atm ? (Assume that the solution volume remains at 1.00L .) I used PV=nRT and

    asked by Someone please help. on February 22, 2010
  77. Chemistry

    Under an O2(g) pressure of 1.00 atm , 28.31mL of O2 (g) dissolves in 1.00L H2O at 298K. What will be the molarity of O2 in the saturated solution at 298K when the pressure is 3.86atm ? (Assume that the solution volume remains at 1.00L .) I used PV=nRT and

    asked by Amber on February 22, 2010
  78. Chemistry

    0.000333 g fluorescein (332.32 g/mol) is dissolved in 225 mL solution of ethanol. The density of ethanol is 0.785 g/mL. What is the concentration of the solution in molarity (M)? How many ppm? I already know that the molarity is 4.45E-6. I just need help

    asked by Vince on July 16, 2012
  79. Chemistry

    Is it possible to separate platinum, palladium, and iridium as chloro-complex ions from an HCl solution through electrolysis if the solution is a constant 1.0 molarity in chloride ions and 0.020 molarity in each complex ion?

    asked by Jeff on December 23, 2018
  80. Chemistry

    A sample of 0.0020 mole of HCl is sissolved in water t omake a 2000ml solution. Calculate the molarity of the HCl solution, the (H30+) and the pH. For a strong acide such as HCl the (h30+) is the same as the molarity of the HCl solution. HCl +H20 Balanced

    asked by Susie on December 1, 2010
  81. chemistry

    What would be the molarity of solution obtained by mixing equal volumes of 30% by mass H2SO4 (d=1.218 g/mL) and 70% by mass H2SO4 (d=1.610 g/mL). If the resulting solution has density 1.425 g/mL, calculate its molarity

    asked by jaimi on April 17, 2015
  82. Chemistry

    Hi i kind of get these questions but i got stuck on this... What is the molarity of an H2SO4 solution if 0.25L of the solution contains 0.75L MOL of H2SO4? thanks again for yourself i really do appreciate it :) Molarity= molessolute/litersolution =

    asked by Fred on April 22, 2007
  83. chem

    how do u set up with problem How would you prepare 165 mL of a 0.0317 m solution of benzoic acid (C7H6O2) in chloroform (CHCl3)? Just follow the definition of molarity. M = mols per L of solution I am assuming the m is molarity. But if it is molality, then

    asked by UTramos on June 30, 2006
  84. Chemistry(Please Check)

    You dissolve 6.55 g of potassium nitrate in enough water to make a 250. ML solution. 1.What is the molarity of this solution?answer:0.0262 2.If you took out 15.0 mL of this solution, how many moles of potassium nitrate would you have?answer:0.393 3. What

    asked by cateye on April 23, 2012
  85. science

    Describe how you would go about making 1200mL of 0.100 Molarity HNO3 from a concentrated solution that is 12 Molarity?

    asked by Nicole on March 14, 2013
  86. chemistry Ben

    50ml of 20.8% bacl2 and 100ml of 9.8% h2s04 solutions are mixed. molarity of cl ions in the resulting solutions is At.wt of ba = 137 100ml of h2s04 solution having molarity 1M and density 1.5g/ml is mixed with 400ml of water. Calculate final molarity of

    asked by Ken on November 16, 2014
  87. chemistry step by step for me

    100ml of h2s04 solution having molarity 1M and density 1.5g/ml is mixed with 400ml of water. Calculate final molarity of h2s04 solution if final density is 1.25g/ml. 50ml of 20.8% bacl2 and 100ml of 938% h2s04 solutions are mixed. Molarity of cl ions in

    asked by Ken on November 16, 2014
  88. chemistry

    1. 15.0 g of sodium sulfate are dissolved in water to form 400.0 g of solution. The density of the solution is 1.056 g/mL at 25oC. a. What is the mass percent (%(w/w)) of sodium sulfate? b. What is the molarity of sodium sulfate? c. What is the molarity of

    asked by josh on June 13, 2011
  89. Electrochemistry

    Is it possible to separate platinum, palladium, and iridium as chloro-complex ions from an HCl solution through electrolysis if the solution is a constant 1.0 molarity in chloride ions and 0.020 molarity in each complex ion? The E values for the half

    asked by Jeff on December 23, 2018
  90. Chemistry

    Please check my work- what is the molarity of a solution that has 34.85 g of Potassium sulfate dissolved in one liter of solution? so K2(SO4) molar mass is 174.26, 34.85 grams x 1mol/174.26 than divided by 1 Liter equals .19998 Molarity with sig figs would

    asked by Petey on April 25, 2016
  91. Chemistry (molarity) (sorta an emergency)

    I'm doing a titration lab and writing a lab report where I'm sort of stuck on how exactly to find the concentration of HCl. These are the following info I have from the lab, Equation: HCl(aq)+NaOH(aq)-> H2O(l)+NaCl(aq) -Calculated molarity of NaOH solution

    asked by Ray on November 13, 2016
  92. chemistry

    2. 0.300 kilogram chloroform(chlorine calcium3)and 21.0grams eucalyptol(carbon10 hydrogen18 oxygen 3. what is the concentration of a solution of sodium chlorine water containing 1.170grams solute in 100moles solution 4, what is the % by volume of a

    asked by juzen on September 14, 2010
  93. Chemistry

    A 100.0mL solution containing aqueous HCl and HBr was titrated with 0.1290M NaOH. The volume of base required to neutralize the acid was 47.56mL. Aqueous AgNO3 was then added to precipitate the Cl- and Br- ions as AgCl and AgBr. The mass of the silver

    asked by Melia on November 19, 2012
  94. Chemistry

    Question: When 1.97 grams of Pb(OH)2(s) is added to 1.00 liter of pure water at 25 C a saturated solution (some solid is present) is formed that has a pH of 8.97. Compute the Ksp value for Pb(OH)2 using the data. How do i go about getting the Molarity from

    asked by Eliz on May 11, 2009
  95. Chemistry

    If I have to make a solution with sodium bicarbonate (baking soda) how do i find the molarity and how do i correctly make the solution??? i.e. how do i prepare a solution of sodium bicarbonate with a molarity of 0.01?

    asked by Jake on January 8, 2008
  96. chemistry

    The molarity of an aqueous solution of barium hydroxide is determined by titration against a 0.335 M nitric acid solution. If 32.8 mL of the base are required to neutralize 21.5 mL of nitric acid, what is the molarity of the barium hydroxide solution?

    asked by Anonymous on April 1, 2014
  97. chemistry

    When I have the table filled out, what would I need to do in order to calculate the solubility product for calcium hydroxide? The following is what I have in mind, please tell if I am incorrect or correct. Ksp = [Ca+2][OH-1]2 You should have an average

    asked by Jessica on April 2, 2008
  98. Chemistry

    What is the molarity of a solution of Mg(OH)2 if the solution contains 1.35 g in exactly 100 mL of solution??? A 15.0 mL solution of H2SO3 is neutralized by 12.0 mL of a standradized 1.00M NaOH solution. What is the concentration of the H2SO3

    asked by Tasha on December 12, 2012
  99. Chemistry

    Hg2+ + 2Cl- → HgCl Mercuric nitrate was standardized by titrating a solution containing 147.6 mg of NaCl(FM 58.44), which required 28.06 ml of Hg(No3)2 solution. Part a: Find the molarity of Hg(No3)2. I already calculated the molarity to be 0.04500 M

    asked by Asuna on October 16, 2011
  100. CHEMISTRY

    Dye of iodine is prepared by dissolving in ethanol , and 1% ( one percent ) of this solution contains 10 g of solute in 1000 g of solution 1) how many grams of solvent is there in the solution ? 2) how many moles of solute ( I2) is there? 3) what is the

    asked by MAD on July 12, 2014