# A 20 gram piece of metal is added to a sample of 100 grams of water inside a calorimeter. If the metal is at a temperature of 125° Celsius and the water is at 20° Celsius, which of the following

68,254 questions
1. ## chemistry

A 20 gram piece of metal is added to a sample of 100 grams of water inside a calorimeter. If the metal is at a temperature of 125° Celsius and the water is at 20° Celsius, which of the following best describes what will occur inside the calorimeter?

asked by Amanda on July 29, 2011
2. ## Chemistry

A piece of metal A and a piece of metal B of the same mass and at the same temperature of 80°C are dropped into seperate beakers each containing 100.0 g of water at room temperature. Once they equilibrate, you find that the beaker with the sample of metal

asked by Tatiyana on October 16, 2017
3. ## Chemistry

A piece of metal weighing 20.32 grams is added to a flask with a volume of 24.5 cm3. It is found that 18.52 grams of water must be added to the metal to fill the flask. What is the density of the metal?

asked by Jane on September 3, 2012
4. ## Chemistry

A 230-gram sample of metal at 82 degrees centigrade is added to 632 grams of water at 14.4 degrees centigrade in an ideal calorimeter. The final temperature of the system (water and metal) is 22.8 degrees centigrade. What is the heat acapacity of the

asked by Trevor on October 26, 2008
5. ## Physics

400 grams of a metal at 300 C is added to 100 grams of of water at 20 C. Assuming all the heat lost by the metal is gained by the water and that the final temperature or water and metal is 95 C, calculate the specific heat of the metal. Using grams and

asked by Sammie on October 20, 2015
6. ## Chemistry

a 5.00 gram sample of a metal is heated to 80 degrees Celsius and is placed in a 100 gram sample of water. the temperature of the water rises from 20 Celsius to 20.3 Celsius which of these is most likely to be the metal

asked by Hazard on April 12, 2015
7. ## Physics

A 100 gram mass of metal at 106°C is placed in 100 grams of cool water at 22°C. The final temperature of the mixture is 25°C. What is the specific heat capacity of the metal?

asked by Kat on February 24, 2017
8. ## chemistry

-You have a sample of unkonw metal that you have heated to 100 deg Celsius (oC) in boilin water. If, unknown to you, the metal sample cools somewhat before being added to your calorimeter, what will be the effect on the delta T for the water in your

asked by kristine on January 29, 2009
9. ## Physics

A 95 gram piece of metal is heated to 98°C and placed into 200mL of water insulated at 20°C. If the equilibrium temperature is 27.20, find: The heat gained by the water. calories The specific heat of the metal. cal/(g°C) Hint: 1 mL water has a mass of 1

asked by Anna on July 9, 2016
10. ## Science/C

A 250 gram sample of metal is warmed from 50°C to 90°C when 100 calories of heat are added. What is he specific heat capacity of the metal?

asked by Raylee on October 12, 2012
11. ## Physics

A 95 gram piece of metal is heated to 98°C and placed into 200mL of water insulated at 20°C. If the equilibrium temperature is 27.20, find: The heat gained by the water. calories: _________ The specific heat of the metal. cal/(g°C): ________ Hint: 1 mL

asked by Anna on July 9, 2016
12. ## physics

A 13.0 gram sample of an unknown metal at 30.0*C is placed in a Styrofoam cup containing 50.0 grams of water at 90.0*C.The water cools down and the metal warms up until thermal equilibrium is achieved at 87.0*C.Assuming all the heat lost by the water is

asked by Annie on July 16, 2017
13. ## science

a 100.0 gram metal sample is heated to a temperature of 110 degrees celcius then placed into a calorimeter containing 100.0 r of pure water (at initial temperature of 23 degrees celcius). after the sample and water reach thermal equalibrium, their final

asked by jason wolthen on March 1, 2011
14. ## Chem

a 0.2000 grams sample of aluminum metal is added to a solution containing 1.0000grams of an unknown compound made of platinum and chloride ion. the reaction results in the formation of aluminum chloride and platinum metal. when the reaction is complete,

asked by Carley on March 1, 2014
15. ## Chemistry

A 108g piece of unknown metal is heated to 100 degrees C in boiling water. The heated sample of metal is then dropped into 50ml of H20, which is initially at 23.0 degrees C. After a few minutes the temp. of water raises to 37.5 degrees C. What is the

asked by Lesley on May 14, 2011
16. ## College Chemistry

Plaster of Paris is the compound calcium sulfate hemihydrate, CaSO4*1/2H2O What mass of water is liberated when a 2.763 gram sample is heated to constant mass? The sample is 2.763 grams How much of the 2.763 gram sample is water? I need an amount in grams.

asked by Roy on October 8, 2011
17. ## physics 2

A 12.9 gram sample of an unknown metal at 26.5°C is placed in a Styrofoam cup containing 50.0 grams of water at 88.6°C. The water cools down and the metal warms up until thermal equilibrium is achieved at 87.1°C. A 10 percent of heat lost by water is

asked by Ehab on March 15, 2016
18. ## physics 2

A 12.9 gram sample of an unknown metal at 26.5°C is placed in a Styrofoam cup containing 50.0 grams of water at 88.6°C. The water cools down and the metal warms up until thermal equilibrium is achieved at 87.1°C. A 10 percent of heat lost by water is

asked by Ehab on March 15, 2016
19. ## physics

A 13 gram sample of an unknown metal at 26.5°C is placed in a Styrofoam cup containing 50.0 grams of water at 88.6°C. The water cools down and the metal warms up until thermal equilibrium is achieved at 87.1°C. A 10 percent of heat lost by water is

asked by Ehab on March 14, 2016
20. ## chemistry

* A 50 gram sample of an unknown metal warms from 18 to 58 after absorbing 800 joules of energy. what is the specific heat of the metal? *copper has a specific heat of 0.387 j/g degree celsius. what is the mass of a piece of copper that undergoes a 21.0 C

asked by help on December 11, 2012
21. ## Science

.100 KG piece of metal is heated to 480°C and then quickly place in .250 KG of water at 20°C which is contained in a .200 KG aluminum calorimeter the final temperature of the water metal and calorimeter is 36°C what is the specific heat to Capacity of

asked by Michaela on March 2, 2015
22. ## Chemistry

A 5.00 gram sample of aluminum pellets (specific heat capacity = 0.89 J/g*C) and a 10.00 gram sample of iron pellets (specific heat capacity = 0.45 J/g*C) are heated to 100.0 *C. The mixture of hot iron and aluminum is then dropped into 97.3 gram of water

asked by Anonymous on October 12, 2010
23. ## Chemistry II

How many grams of gasoline would you need to burn if you started with a 275 gram piece of ice that started at -25 OC and by the end of the experiment had 100 grams of steam and the rest liquid water?

asked by Cynthia on July 21, 2015
24. ## chemistry

How many grams of gasoline would you need to burn if you started with 275 gram piece of ice that started at -25C and by the end of the expirement had 100 grams of steam and the rest liquid water?

asked by reginajones on February 16, 2011
25. ## Science

When 72 g of a metal a t 97.0°C is added to 100 g of water at 25.0°C the final temperature is found to be 29.1°C. What is the heat capacity per gram of the metal? (Heat capacity of H2O = 4.184 J/g - °C )

asked by Cassie on May 9, 2011
26. ## chemistry

A 23.9 g piece of metal heated to 97.8 oC is placed in 52.4 g water at 21.9 oC. After the metal is added, the temperature of the water rises to 29.9 oC. Calculate the specific heat of the metal. Express your answer in the units of cal/goC.

asked by HAY on November 20, 2014
27. ## chemistry

A 49g piece of ice at 0.0C is added to a sample of water at 9.0C. All of the ice melts and the temperature of the water decreases to 0.0C . How many grams of water were in the sample?

asked by steph on September 9, 2011
28. ## Chemistry

Calculate the density of an unknown sample of metal given that a 2.3504 gram sample of metal causes the water level in a graduated cylinder to rise from 33.5 ml to 35.2 ml. Show work

asked by josh on August 31, 2015
29. ## chem

another calorimetry experiment is performed in which a 500. gram peice of gray metal at 67 degrees celsius is added to 493 grams of water. the water's temperature, originally at 17 degrees celsius, changes to 22 degrees celsius. What is the specific heat

asked by miley on April 24, 2008
30. ## college chemistry

a 42 piece of ice at 0.0 C is added to a sample of water at 8.0 C. all of the ice melts and the temperature of the water decreases to 0.0 C. how many grams of water were in the sample.

asked by Linda on January 30, 2014
31. ## Chemistry

A 70 piece of ice at 0 is added to a sample of water at 6. All of the ice melts and the temperature of the water decreases to 0. How many grams of water were in the sample?

asked by Sherice on September 8, 2012
32. ## chemistry

a 42 piece of ice at 0.0 C is added to a sample of water at 8.0 C. all of the ice melts and the temperature of the water decreases to 0.0 C. how many grams of water were in the sample.

asked by Linda on January 30, 2014
33. ## Chemistry

A 11.6 g sample of an unknown metal was heated to 100.0 oC and then added to 25.0 g of water at 23.0 degrees Celsius in an insulated calorimeter. At thermal equilibrium, the temperature of the water in the calorimeter was 24.8 degrees Celsius. What is the

asked by Abby on February 19, 2015
34. ## Science

A piece of unknown metal with a mass of 68.6 grams is heated to an initial temperature of 100 Celsius and dropped into 42 grams of water with an initial temperature of 20 Celsius in a calorimeter the final temperature of the system is 52.1 Celsius the

asked by Raven on September 18, 2016
35. ## chem

A student placed 12.0grams of glucose in a flask added enough water to dissolve glucose by swirling then added additional water until the .100 ml mark. A 60.0ml sample of this glucose soon was diluted to 0.500 L. How many grams of glucose are in 100. ml of

asked by ALISON on September 19, 2011
36. ## science

2. A 75.0 g sample of a metal is placed in boiling water until its temperature is 100.00C. A calorimeter contains 100.00 g of water at a temperature of 24.40C. The metal sample is removed from the boiling water and immediately place in water in the

asked by Lilian on April 22, 2015
37. ## geology

suppose you have a sample of clamshell at a paleoindian site and you measure the 14c activity of aa 100-gram sample of carbon as 320 disintegretions per scond (or 3.2 disingtegrations per gram of carbon per second). a. what was the activity(in

asked by jon on October 16, 2007
38. ## chemistry

a 52g piece of ice at 0 degree is added to a sample of water at 6 degree all the ice melts and the temp of the water decreases to 0 degrees how many grams of water were in the sample?

asked by brenda on September 17, 2011
39. ## Chemistry-Dr.Bob

An unknown piece of metal weighing 100. g is heated to 90.0 degrees Celcius. It is dropped into 250 g of water at 20.0 degrees Celcius. When equilibrium is reached, the temperature of both the water and piece of metal is 29.0 degrees Celcius. Determine the

asked by Sanaya on January 9, 2016
40. ## chem+ help!

When 80.0 grams of a certain metal at 90.0 °C was mixed with 100.0 grams of water at 30.0 °C, the final equilibrium temperature of the mixture was 36.0 °C. What is the specific heat (J/g°C) of the metal? I suppose I would use this formula: q= mcÄt m=

asked by bon on January 23, 2007
41. ## Chemistry

A student placed 17.0 g of glucose (C_6H_{12}O_6) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100 mL mark on the neck of the flask was reached. The flask was then shaken

asked by Tiffany on July 7, 2010
42. ## western michigan university

A 30 gram metal at 100 degrees Celsius was dropped into 132 grams of water at 25 degrees Celsius and the final temperature for the metal in water system was 29 degrees Celsius. Calculate the specific heat capacity of the metal if the specific heat capacity

asked by lorena on December 6, 2012
43. ## college chemistry

a 1.0kg sample of metal with a specific heat of 0.50KJ/Kg C is heated to 100.0C and then placed in a 50.0g sample of water at 20.0C . What is the final temperature of the metal and the water?

asked by Kylie on September 30, 2014
44. ## chemistry

If 74.5 grams of a hot metal was added to 56.4 grams of water and the temperature of the water rose from 20.4 to 33.4 degrees, how many KJ of energy was lost by the hot metal?

asked by katie on March 19, 2011
45. ## Chemistry

A student measures the initial temperature of an object as 28.33oC and the final temperature as 62.35 oC. What is the change in temperature in units of Kelvin? An unknown metal is found to have a specific heat capactiy of 0.235. From this, calculate its

asked by Tatiyana on October 17, 2017
46. ## Chemistry

When sodium Metal is dropped into water, all the metal reacts in the equation shown below. What mass of hydrogen is liberated from a 46.0 gram piece of sodium? 2Na(s)+2H2O(I) > 2NaOH(aq)+H2(g)

asked by Franklin on January 13, 2012
47. ## Chemistry

I've seen the posts on solving this particular equation, and I know the answer is right in front of me. I'm still having trouble understanding why... a 42g piece of ice at 0.0 degrees C is added to a sample of water at 7.8 degrees C. All the ice melts and

asked by Elliott on September 22, 2012
48. ## Chemistry

A piece of metal has a mass of 0.010107 kg. When it was placed into a 100-mL graduated cylinder containing 30.0 mL of water, the volume of water increased to 32.3 mL. What is the density of the metal (g/mL)?

asked by tammi on January 22, 2017
49. ## Chemistry

The mass of an empty container is 91 g. The mass of the container filled with water is 111 g. What is the volume of the container? The density of water is 1 g/cm3 .Answer in units of cm3 20cm3 016 (part 2 of 5) 1.0 points The container was emptied, dried,

asked by Katie on September 19, 2016
50. ## chemistry

If 74.5 grams of a hot metal was added to 56.4 grams of water and the temperature of the water rose from 20.4 to 33.4 degrees, how many KJ of energy was lost by the hot metal? i need helping setting up where the numbers go. I'm lost

asked by katie on March 20, 2011
51. ## Chemistry HELP!

A student placed 10.5g of glucose (C6H12O6) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.- mL mark on the neck of the flask was reached. The flask was then shaken until

asked by anonymous on February 12, 2009

A student placed 10.5g of glucose (C6H12O6) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.- mL mark on the neck of the flask was reached. The flask was then shaken until

asked by anonymous on February 12, 2009
53. ## physical science

a 1.0 kg sample of metal with a specific heat of 0.50KJ/kgCis heated to 100.0C and then placed in a 50.0g sample of water at 20.0C. What is the final temperature of the metal and the water? I can't figure this out. Is the answer room temperature???

asked by nate on November 7, 2007
54. ## college geology help please

I was the same person from yesterday. I need help on a question. I don't type very good so I have one of my host family do it for me. so please help us. Suppose you have a sample of clamshell at a Paleoindian site and you measure the 14C activity of a

asked by student012 on October 21, 2008
55. ## chemistry

A 37.0 g mass of a metal was heated to 100°C and then plunged into 74 g of water at 24.0°C. The temperature of the resulting mixture became 28.0°C. (a) How many joules did the water absorb? (b) How many joules did the metal lose? (c) What is the heat

asked by Kelsey on April 27, 2014

An unsaturated solution is made by completely dissolving 20.0 grams of NaNO3 in 100.0 grams of water at 20.0°C. (the gram formula mass=85.0 grams per mole) Determine the minimum mass of NaNO3 that must be added to this unsaturated solution to make a

asked by R on December 25, 2009
57. ## Chemistry

Hi, can you help with how to solve this equation? 50.0 gram sample of NaCl is added to water to create a 0.50 L solution. What volume of this solution is needed to create a 1.30 L solution that is 0.100 M NaCl? The choices provided: a) 152 mL b) 255 mL c)

asked by Cassandra on April 3, 2015
58. ## chemistry

a 52.0 gram sample or water increases in temperature due to the addition of a hot metal from 17.7 degrees C to 24.4 degrees C. How many calories has the water absorbed? how many calories did the metal lose?

asked by ashley on December 13, 2010
59. ## Chemistry

A 150.0-g sample of a metal at 69.7°C is added to 150.0 g of H2O at 10.5°C. The temperature of the water rises to 13.6°C. Calculate the specific heat capacity of the metal, assuming that all the heat lost by the metal is gained by the water.

asked by Anonymous on September 26, 2015
60. ## Chemistry

A student placed 14.0 of glucose () in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.- mark on the neck of the flask was reached. The flask was then shaken until the solution

asked by Sherryl on February 8, 2010
61. ## chemistry

A student placed 11.5 of glucose () in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.- mark on the neck of the flask was reached. The flask was then shaken until the solution

asked by sam on January 31, 2010
62. ## chemistry

A student placed 12.5 of glucose () in a 100.- volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the calibration mark on the neck of the flask was reached. The flask was then shaken until

asked by tomi on March 12, 2009

A student placed 17.0 g of glucose (C6H1206) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.-ml mark on the neck of the flask was reached. The flask was then shaken until

asked by Christy on June 4, 2011
64. ## Chemistry

A student placed 12.0g of glucose (C6H1206) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.-ml mark on the neck of the flask was reached. The flask was then shaken until

asked by Steve on September 29, 2010

A student placed 11.0 of glucose (C6H12O6) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.-ml mark on the neck of the flask was reached. The flask was then shaken until the

asked by Rose on October 5, 2009
66. ## chem

A student placed 13.5g of glucose (\rm C_6H_{12}O_6) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100. \rm mL mark on the neck of the flask was reached. The flask was then

asked by Anonymous on February 15, 2013
67. ## Science

And ice cube Wayne 1 g is placed in our closed insulated container with 9 g of water at 20°C 68°F after 24 hours elapse the container will hold what (1) ten grams of water (2) one gram of ice and nine grams of water (3) five grams of ice and five grams

asked by Mydogbear on May 13, 2017
68. ## physics

120 grams of an unknown metal at a temperature of 95 degrees celcuius is poured into 140 grams of aluminum calorimeter containing 220 grams of water. If the inital temperature of the water and calorimeter was 15 degree celcuius and the final temperature

asked by christoper allen on December 21, 2014
69. ## Chemistry

a sample of an unknow metal exists as a perfect cube that meausres 0/78 in on a side and weighs 61.4 grams. what would be the mass, in grams, of a diff sample of this metal that has a volume of 25.0 cm^3

asked by Helen on September 18, 2012
70. ## Chemistry

A 62g piece of ice at 0 degrees celcius is added to a sample of water at 9 degrees celcius. All of the ice melts and the temperature of the water decreases to 0 degrees celcius. How many grams of water were in the sample

asked by Lisa on February 17, 2013
71. ## Chemistry

A 0.528 gram sample of a metal, M, reacts completely with sulfuric acid according to: M+H2SO4 -> MSO4+H2 A volume of 205 mL of hydrogen is collected over water; the water level in the collecting vessel is the same as the outside level. Atmospheric pressure

asked by Bill on October 16, 2012
72. ## chemistry

A student placed 10.5 g of glucose C6H12O6 in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.mL mark on the neck of the flask was reached. The flask was then shaken until the

asked by Cory on October 6, 2009
73. ## AP Chem

A student placed 17.5 g of glucose in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100. mL mark on the neck of the flask was reached. The flask was then shaken until the

asked by Ana on October 19, 2009
74. ## chemistry

You are a chemist requested to review and analyse certain debris found on thebottom of aboot found in a crime scene. The debris contains metal fragments. If you identify the metal fragments---it will help the detctive identify the locations traveled by the

asked by Jimmy on February 26, 2012
75. ## chemistry

Please help me through this problem... A 0.5117 gram fertilizer containing phsphorus was oven dried. The weight of the dried sample is 0.4998 grams. However, 10% moisture is still retained in the sample. Calculate the moisture content in the sample in as

asked by smiley on August 31, 2007
76. ## college Geol 101

Suppose you have a sample of clamshell at a Paleoindian site and you measure the 14C activity of a 100-gram sample of carbon as 320 disintegrations per minute (or 3.2 disintegrations per gram of carbon per minute). a.What was the activity (in

asked by Jay on October 20, 2010
77. ## math, statistic

the average of the hemoglobin reading for a sample of 20 teachers was 16 gram per 100 milliliters, with a sample standard deviation of 2 grams. find the 99% confidence interval of the population mean.

asked by nurul on June 14, 2013
78. ## chemistry

a 100 gram sample of a metal undergoes a temperature change from 20 C to 50 C Absorbing 1500J of heat

asked by Jayden on April 9, 2015
79. ## AP Chemistry

A 2.5 gram sample of a hydrocarbon containing C, H, N, O is combusted in excess oxygen. The nitrogen compounds that are formed are treated to convert all of N to N2. The gases are passed through a CaCl2 drying tube which weighs 1.00 gram initially and 3.16

asked by Kim on April 24, 2011
80. ## Chemistry

A 0.464 gram sample of a metal, M, reacts completely with sulfuric acid according to: M(s) +H2SO4(aq)=MSO4(aq)+H2(g) A volume of 211 mL of hydrogen is collected over water; the water level in the collecting vessel is the same as the outside level.

asked by Raul on March 9, 2013
81. ## Chemistry

A 41 g piece of ice at 0.0 degree Celsius is added to a sample of water at 8.6 degree Celsius. All of the ice melts and the temperature of the water decreases to 0.0 degree Celsius. How many grams of water were in the sample?

asked by Jennifer on September 8, 2011
82. ## Science

A 44 g piece of ice at 0 degrees celsius is added to a sample of water at 7 degrees celsius. all of the ice melts and the temperature of the water decreases to 0 degrees celsius. How many grams of water were in the sample?

asked by scott on June 18, 2010
83. ## chemistry

what is the maximum amoutn of KCL that can dissolve in 200 gram of water? ( solubility of KCL is 34 grams/100 gram H2O at 20 celsius

asked by Miley on June 10, 2008
84. ## Chemistry

Metal Specific Heat (J/g-C) Al (s) 0.900 Au(s) 0.129 Cu(s) 0.385 Fe(s) 0.444 Hg(l) 0.139 H2O(l) 4.184 C2H5OH(l) 2.46 A piece of metal at a temp of 95.0oC and a mass of 67.0 g is dropped into a beaker of water containing 100 g at a temp. of 30.0oC. If the

asked by christine on October 24, 2010
85. ## math

margarit liked to balance things. she balanced 3 pencil sharpeners and 2 one gram blocks with a 100 gram weight and another one gram block. she let x stand for the weight of one pencil sharpener and she claimed that x=30grams. was she correct if not how

asked by ciera on January 23, 2007
86. ## Science

Jake was doing a lab to find the density of metal. Here's his data: mass of the metal sample: 45 grams, volume of metal sample: 4.5 mL. Use his data to determine the density of the metal sample. Can you help? I don't get this.

asked by Haley on October 7, 2010
87. ## chemistry

A 100.0 gram sample of iron at 80.0 degrees Celsius was placed in 150 grams of water at 20.5 degrees Celsius. What was the final temperature when thermal equilibrium was reached?

asked by tom on January 31, 2012
88. ## Chemistry

A 0.528 gram sample of a metal, M, reacts completely with sulfuric acid according to: M+H2SO4 -> MSO4+H2 A volume of 205 mL of hydrogen is collected over water; the water level in the collecting vessel is the same as the outside level. Atmospheric pressure

asked by Bill on October 17, 2012
89. ## Chemistry

a 20.94-g sample of an unknown metal is heated to 99.4 degrees Celsius in a hot water bath until thermal equilibrium is reached. The metal is quickly transferred to 100 mL of water at 22.0 degrees Celsius contained in a styrofoam cup. The thermal

asked by Dalal on April 10, 2018
90. ## Physics

Find the specific heat of an unknown metal given this data: Mass of the metal = 120 g Temp of the metal = 220 degrees Mass of the water = 30 g Initial Temp of the water = 20 degrees Final Temp of the water = 85.6 degrees Specific Heat of the water = 4.186

asked by Anonymous on January 6, 2017
91. ## chem

A 0.069 gram sample of a metal reacted with HCl and produced 45.31 mL of H 2 gas at 25¡ÆC and 1 atm pressure. The metal is known to react with HCl according to the following reaction, 2 M + 6 HCl > 2 MCl 3 + 3 H 2 What is the molar mass of the metal?

asked by jhon on October 31, 2014
92. ## chemistry

I really really need help w/this problem I think i figured it out but i have to be sure i did it right in order to do others similar to it please help thanks Metal Specific Heat (J/g-C) Al (s) 0.900 Au(s) 0.129 Cu(s) 0.385 Fe(s) 0.444 Hg(l) 0.139 H2O(l)

asked by christine on October 24, 2010
93. ## Science

Why does the temperature remain constant around 0 degrees C and 100 degrees C? For what? For water when it is freezing or boiling? Or do you have another question in mind? Sorry, it's for water when it is freezing or boiling. Think of it this way. Start

asked by Katie on January 4, 2007
94. ## Physics

A piece of metal with an irregular shape has a mass of 4.281kg. When weighed while submerged in water, the piece of metal has an apparent mass of 4.000kg. What is the density of the metal? (Ans: 1.52x10⁴ kg/m³)

asked by physics help on November 12, 2018
95. ## Physics

A 50 g sample of an unknown metal is heated to 90.0C. It is placed in a perfectly insulated container along with 100 g of water at an initial temperature of 20C. After a short time, the temperature of both the metal and water become equal at 25C. The

asked by Anonymous on February 14, 2016
96. ## Physics

A 50 g sample of an unknown metal is heated to 90.0C. It is placed in a perfectly insulated container along with 100 g of water at an initial temperature of 20C. After a short time, the temperature of both the metal and water become equal at 25C. The

asked by Jon on February 14, 2016
97. ## ap chemistry

A sample of KOH is dissolved into 100.0 grams of water in a coffee cup calorimeter. if the dissolution produces 6.45 kJ of heat and the temperature change is 25.4 degrees celcius to 40.0 degrees celcius, how much KOH (in grams) is added to the water? (the

asked by Sarah on September 24, 2010
98. ## Chemistry

if a 100g sample of water at 60.0 C is added to a 100.0 g sample of water at 10.0 C, determine the final temperature of the water. Assume no heat is lost to the surroundings

asked by emily on March 5, 2011
99. ## Chemistry

A piece of metal of mass 20.0g @ 100°C is placed in a calorimeter containing 50.7g of water at 22.0°C. The final temperature of the mixture is 25.7°C. What is the specific heat capacity of the metal? Assume that no energy leaves to the surroundings. Not

asked by Momo on October 4, 2009
100. ## chemistry

Combustion analysis of 1.00g of the male sex hormone, testosterone, yields 2.90 g of CO2 and .875 g H2O. What are the mass percents of carbon, hydrogen, and oxygen in testosterone? How do I solve this? How many grams of C is in 2.90g of CO2? That is the

asked by Chris on October 16, 2006