prepare M/20 solution of oxalic acid. Find out the molarity and strength in gram per litre of the given solution of potassium permanganate with the help of the prepared solution of oxalic acid

130,334 results

  1. chemistry(Urgent Please help)

    A student is asked to standardize a solution of barium hydroxide. He weighs out 0.945 g potassium hydrogen phthalate (KHC8H4O4, treat this as a monoprotic acid). It requires 33.9 mL of barium hydroxide to reach the endpoint. A. What is the molarity of the

  2. Chemistry

    A chemistry student needs to standardize a fresh solution of sodium hydroxide. She carefully weighs out 338.mg of oxalic acid H2C2O4 , a diprotic acid that can be purchased inexpensively in high purity, and dissolves it in 250.mL of distilled water. The

  3. Chemistry

    25.00 mL of a solution of oxalic acid are titrated with 0.2586 m NaOH (aq). The stoichiometric eend point is reached when 43.42 mL of the solution of base is added. What is the molarity of the oxalic acid solution? Oxalic acid reacts with sodium hydroxide

  5. chemistry

    The following data were collected at the endpoint of a titration performed to find the molarity of an HCl solution: Volume of acid (HCl) used = 14.4 mL; Volume of base (NaOH) used = 22.4 mL; Molarity of standard base (NaOH) = 0.200 M; What is the molarity

  6. dilution

    Many labs keep bottles of 3.0M solutions of the common acid on hand. Given the following molarities of the concentrated acids, determine how many mL of each concentrated acid would be required to prepare 225mL of a 3.00M solution of the acid Acid: HCl

  7. Chemistry!!

    A chemist wants to prepare a stock solution of H2SO4 so that a sample of 20.00mL will produce a solution with a concentration of .50 M when added to 100.0mL of water. A)what should the molarity of the stock solution be? B)If the chemist wants to prepare

  8. chemistry

    A solution is prepared by dissolving 0.5842g of oxalic acid (H2C2O4) in enough water to make 100.0ml of solution. A 10.00ml aliquot (portion) of this solution is then diluted to a final volume of 250.0ml. What is the final molarity of thus prepared oxalic

  10. Chemistry

    I found the following procedure to prepare starch indicator solution on a website:- To prepare starch indicator solution, add 1 gram of starch (either corn or potato) into 10 mL of distilled water, shake well, and pour into 100 mL of boiling, distilled

  11. chemistry help asap

    Please check these thanks. 1. In a titration, 33.21 mL 0.3020M rubidium hydroxide solution is required to exactly neutralize 20.00 mL hydrofluroic acid solution. What is the molarity of the hydrofluroic acid solution? Answer: 0.502HF 2. A 35.00 mL-sample

  12. Chemistry

    A sample of oxalic acid (H2C2O4, with two acidic protons), of volume 37.09 mL was titrated to the stoichiometric point with 22.41 mL of 0.163 M NaOH(aq). What is the molarity of the oxalic acid? Answer in units of M.

  13. chemistry

    Find the molar masses of the following compounds: 1. LiI 2. PbCO4 3. Mg(OH)2 4. (NH4)3PO4 Find the percent composition (percent by mass) of the given element in the following compounds: 1. Fluorine in AgF 2. Hydrogen in glucose (C6H12O6) 3. Oxygen in

  15. chemistry

    what is the hydronium ion concentration of a 0.35M oxalic acid, H2C2O4. solution? for oxalic acid, ka1= 5.6x10^-2 and ka2=5.1x10^-5. Identify and calculate the concentrations for the representative species in solution.

  16. chemistry

    prepare M/20 solution of oxalic acid. Find out the molarity and strength in gram per litre of the given solution of potassium permanganate with the help of the prepared solution of oxalic acid

  17. Chemistry

    1. Calculate the concentration of H3O+, HC2O4-1, and oxalate ion (C2O42-) in a 0.175 M solution of oxalic acid (C2H2O4). [For oxalic acid, Ka1 = 6.5 ´ 10-2, Ka2 = 6.1 ´ 10-5.]

  18. Chemistry

    How do you find the Ka1 and Ka2 of oxalic acid when it is in a solution that is 1.05 M H2C2O4 and has a pH of 0.67. [C2O4^2-] = 5.3x10^-5 M. I have tried using an ICE table for both reactions, as oxalic acid is a diprotic acid, but I am having trouble

  20. Chemistry

    Oxalic acid, found in the leaves of rhubarb and other plants, is a diprotic acid. H2C2O4 + H2O ↔ H3O+ + HC2O4- Ka1= ? HC2O4- + H2O ↔ H3O+ + C2O42- Ka2 = ? An aqueous solution that is 1.05 M H2C2O4 has pH = 0.67. The free oxalate ion concentration in

  21. chemistry

    Calculate the molarity of a sodium hydroxide solution if 10.42 mL of this solution are needed to neutralize 25.00 mL of 0.2043 M oxalic acid. how do you do the working out

  22. Chemistry

    How many Kilograms of water must be added to 5.0 grams of oxalic acid (H2C2O4) to prepare a 0.40 Molality?

  23. Chemistry

    Prepare M/20 oxalic acid solution.Using this solution, find molarity, strength, and percentage purity of the sodium hydroxide solution.

  25. Chemistry

    What mass of oxalic acid dihydrate , H2C2O4•2H2O, is required to prepare 220.0 ml of a 1.28 M solution of oxalic acid ?

  26. chemistry

    i am given equation CH3COOH + NaOH ---> NaCH3COO + H2O 25ml of acetic acid solution 0.025L 12ml of mid point of titration 1mol of NaOH find molar concentration i use a balanced equation it's a 1:1 ratio finding NaOH molarity = mols/litre = mols/L molarity=

  27. chemistry

    A solution of dibasic acid H2X contains 12.60gr of acid per litre, 10cm^3 of this acid solution required 20cm^3 of 0.1M potassium hydroxide solution for complete neutralization using phenolphthalein Find relative molecular mass of of acid and deduce the

  28. chemistry

    If 25cm^3 of NaOH solution containing 4.0g per litre of solution neutralised 50cm^3 of a monobasic acid,HX containing 1.8g of acid.Calculate the R.F.M of the acid. I got the molarity of NaOH to be 0.1,then i got stuck.plz help

  30. Chem

    A sample of oxalic acid, H2C2O4, weighing 1.294 g is placed in a 100.0 mL volumetric flask, which is then filled to the mark with water. What is the molarity of the solution?

  31. chemistry

    the following titration data were collected: a 10 mL portion of a unknown monoprotic acid solution was titrated with 1.12340 M NaOH and required 23.95 mL of the base solution for neutralization. calculate the molarity of the acid solution calculate the

  32. chemistry

    molarity of kmno4 and strength of kmno4 in M/25 solution experiment of oxalic acid.......

  33. science

    100mL of oxalic acid (H2C2O4) requires 35mL of 0.04M KMnO4 to titrate it to the endpoint. calculate the molarity of the oxalic acid.

  35. Chemistry

    What is the pH of a 0.030 M solution of oxalic acid? Ka for oxalic acid is 5.9 × 10−2.

  36. chemistry

    Calculate the Molarity of the unknown acid if 25.0 mL of the acid reacts with 17.50 mL of 0.14 M NaOH solution. Assume that NaOH and acid react in 1:! ratio. Show your work. (Hint: Find the moles of NaOH from the given molarity and volume. mols of NaOH =

  37. chemistry

    The pH of human blood needs to be between 7.35 and 7.45. You want to prepare a buffer solution that gives a pH of 7.40. You decide to use a sodium phosphate buffer: the acid is H2PO− 4 and the conjugate base is HPO2− 4 . You want the concentration of

  38. chemistry

    Oxalic acid (H2C2O4) can be used to remove rust according to the following balanced equation: Fe2O3 + 6H2C2O4 --> 2Fe(C2O4)33- +3H2O + 6H+ Calculate the number of grams of rust that can be removed by 5.00 x 102 ml of a 0.122M solution of oxalic acid. I

  40. Chemistry

    24) It was found that a 20.00 mL portion of a solution of oxalic acid, H2C2O4, requires 6.69 mL of 0.200 M K2Cr2O7 for complete reaction in an acidic solution. In the reaction, the oxidation product is CO2 and the reduction product is Cr3+. How many

  41. Chemistry

    Tartaric acid has two acidic (ionizable) hydrogens. The acid is often present in wines and precipitates from solution as wine ages. A solution containing an unknown concentration of the acid is titrated with NaOH. It requires 22.62 mL of 0.2000 M NaOH

  42. college Chemistry

    What is the mole of oxalic acid? Equation:H2C2O4 + 2NaOH---> Na2C2O4 + 2H2O *Moles of oxalic acid dihydrate is 0.032 mole. * Molarity of oxalic acid solution is 0.128 M oxalic acid solution. * Initial volume of Oxalic acid is 19.8 ml and Final volume is

  43. CHEM

    Mass percent is one way to represent solution concentrations, though not the only one. A common measure of solution concentration is Molarity; moles of solute per liter of solution. Calculate the molarity of vinegar in each sample that you titrated and

  45. Chemistry

    Oxalic acid is a relatively strong diprotic acid with Ka1 = 5.6 ´ 10-2 and Ka2 = 5.1 ´ 10-5. What is the oxalate ion, C2O42-, concentration in a 0.10 M oxalic acid solution? a. 0.052 b. 0.073 c. 0.10 d. 5.6 ´ 10-2 e. 5.1 ´ 10-5

  46. Chemistry

    A sample of oxalic acid, H2C2O4, is titrated with standard sodium hydroxide, NaOH, solution. A total of 45.2 mL of 0.12 M NaOH is required to completely neutralize 20.0 mL of the acid. What is the concentration of the acid? Concentration is Molarity, which

  47. Chemistry ! Need help.

    A buffer prepared by dissolving oxalic acid dihydrate (H2C2O4·2H2O) and disodium oxalate (Na2C2O4) in 1.00 L of water has a pH of 5.007. How many grams of oxalic acid dihydrate (MW = 126.07 g/mol) and disodium oxalate (MW = 133.99 g/mol) were required to

  48. chemistry

    Calculate the concentration of oxalate ion (C2O42−) in a 0.175 M solution of oxalic acid (C2H2O4). [For oxalic acid, Ka1 = 6.5 × 10−2, Ka2 = 6.1 × 10-5.]

  50. Chemistry

    20.5 mL of oxalic acid,H2C2O4 were titrated with 0.800 M solution of lithium hydroxide. It took 40.0 mL of the base to reach the equivalence point. What is the molarity of the oxalic acid?

  51. Chemistry

    100mL of oxalic acid (H2C2O4) requires 35mL of 0.04 M KMnO4 to titrate it to the endpoint. calculate the molarity of the oxalic acid

  52. Science

    Preparation of M/20 oxalic acid solution and determine it strength. For practical

  53. Science

    Calulations and observations to determine the molarity of given sodium hydroxide solution provided with M/20 oxalic acid solution

  55. Chemistry

    How many mL of glacial acetic acid would you pipette to prepare a solution of 100 mL of 5 M acetic acid solution (hint: molarity of glacial acetic acid)

  56. Chemisty

    A 2.5 L volume of sodium hydroxide solution was prepared. The titrant was standarized against primary standard oxalic acid dihydrate, H2C2O4*H2O(molar mass is 126.06) if a 0.4774g sample of the prmiary standard consumed 31.94mL of the base solution in

  57. chem

    sorry . Can you please help me with this questions If you know? Oxalic acid is a relatively strong diprotic acid with Ka1 = 5.6 ´ 10-2 and Ka2 = 5.1 ´ 10-5. What is the C2O42- concentration in a solution that is 0.10 M in oxalic acid and 1.0 M in HCl?

  58. chemistry

    You want to measure the oxalic acid contents in 20 ml of a solution. To this end, you add 100 mmol sodium dichromate to the solution. Then you titrate the remainder of the dichromate with a Fe2+ solution of 1 mM, of which you need 11 ml. What was the

  60. chemistry

    prepare n/10 solution of oxylic acid .find out the strength in normality of the given potassium permagnet solution with the help of prepared solution of oxylic acid?

  61. chemistry

    an impure sample of oxalic acid C2O4H2, with a mass of 0.465g, is dissolved in water. a few drops of phenolphthalein indicator solution are added, and the solution is titrated with 0.190 mol/L aqueous sodium hydroxide held in a burette. the solutointurns

  62. Chemistry

    How many mL of glacial acetic acid would you pipette to prepare a solution of 100mL of 5 M acetic acid solution? (Hint: what is the molarity of glacial acetic acid?)

  63. chemistry

    A 2.5 g sample of NaOH (Mw = 40.00) was dissolved in water to give a solution of final volume 250 cm3. (i) With reasons, state whether NaOH is a strong or a weak base. Give the conjugate acid of NaOH and decide whether this conjugate acid is acid, alkaline

  65. Chemistry

    What is the mole of oxalic acid? Equation:H2C2O4 + 2NaOH---> Na2C2O4 + 2H2O *Moles of oxalic acid dihydrate is 0.032 mole. * Molarity of oxalic acid solution is 0.128 M oxalic acid solution. * Initial volume of Oxalic acid is 19.8 ml and Final volume is

  66. Chemistry

    You have a solution that contains 5.0 grams of oxalic acid dissolved in 150 mL of water. This solution is placed in a seqparatory funnel, and the 100 mL of diethyl ether is added to the separatory funnel and an extraction is performed. Use the following

  67. Chemistry

    A student did not fully mix the solution of Oxalic Acid in the volumetric flask predict and explain the effect of the range of the students titration volumes when using the NaOH solution to titrate the Oxalic Acid solution

  68. chemistry

    what is the mass of oxalic acid required to prepare 250cm3 of a 1.5M solution of the acid

  70. Chemistry

    You have a solution that contains 5.0 grams of oxalic acid dissolved in 150 mL of water. This solution is placed in a separatory funnel, and the 100 mL of diethyl ether is added to the separatory funnel and an extraction is performed. Use the following

  71. chemistry

    What is the molarity of the solution containing 6.245g of oxalic acid, H2C2O4 in 750mL

  72. science

    What is the hydroxide-ion concentration of a 0.240 M oxalic acid, H2C2O4, solution? For oxalic acid, Ka1 = 5.6 × 10–2 and Ka2 = 5.1 × 10–5. 6)

  73. Ap Chemistry

    A perchloric acid solution is composed of 168.75 g of perchloric acid and 81.25 mL of pure water. What is the percent by mass of the perchloric acid solution? The density of water is 1.000 g/mL. When I did this part I got 67.5% But, I am having trouble

  75. chem

    how do u set up with problem How would you prepare 165 mL of a 0.0317 m solution of benzoic acid (C7H6O2) in chloroform (CHCl3)? Just follow the definition of molarity. M = mols per L of solution I am assuming the m is molarity. But if it is molality, then

  76. chemistry

    a chemist has a supply of cuso4 solution that contains 230 gram per litre of water. she wishes to make a copper sulphate solution that has a solution of 200.0 grams per litre gow ,uch of her copper sulphate solution should she use and how much water should

  77. chemistry

    You were given 25.00 ml of an acetic acid solution of unknown concentration. You find that it requires 29.60 ml of a 0.1050 M NaOH solution to exaclty neutralize this sample. A) What is the molarity of the acetic acid solution? B) what is the percentage of

  78. Chem

    1. What is the molarity of a copper(II) dihydroxide [Cu(OH)2] solution if 25.25 mL of the solution is titrated to the equivalence point with 36.18 mL of 0.549 M prussic acid [H(CN)]? 2. What volume of a 0.138 M dihydroxyl base solution is needed to

  80. chemistry

    how to prepare 10g per litre of hydrochloric acid

  81. chemistry

    A sulphuric acid density solution of 1.38 g/ml has a concentration of 56% w/w. Calculate the amount of moles of the existing acid in 1 litre of this solution.

  82. chemistry, please help!

    Given: 1. Mass of oxalic acid + weighing paper 2.0355g 2. Mass of weighing paper 0.5219 g 3.volume of oxalic acid solution 250 mL 5. Volume of oxalic acid used in titration trial 1: 15.o mL Trial 2: 15.0 mL 6. Volume of NaOH solution used in titration:

  83. Chemistry

    1. A sample of oxalic acid (H2C2O4, with two acidic protons), of volume 46.56 mL was titrated to the stoichiometric point with 17.06 mL of 0.297 M NaOH(aq). What is the molarity of the oxalic acid? Answer in units of M. 2. What mass of the oxalic acid was

  85. chem lab

    In a pottasium permanganate and oxalic acid titration..why do we add sulfuric acid to the oxalic acid solution and then boil it before titrating??

  86. science

    0.63 gm of oxalic acid (COOH)2 2H20 are dissolved in 500 ml of solution. Calculate the molarity of the solution?

  87. chemistry

    You have a solution that contains 0.25g grams of oxalic acid dissolved in 100 mL of water. This solution is placed in a separating funnel, and the 100 mL of butanol is added to the solution. calculate the mass of oxalic acid in the organic solvent

  88. ThermoChemistry

    Calculate the final temperature of solution when 10 g of oxalic acid, (COOH)2(s), is dissolved in 110.0 mL of water that is initially at 26 C. The enthalpies of formation of oxalic acid in the solid and aqueous phases are -826.8 and -818.8 kJ/mol,

  90. Chemistry

    The amount of oxalic acid (equ.wt.63) required to prepare 500ml of its 0.10 N solution is

  91. Chemistry

    What is the hydroxide ion concentration of a 0.370M oxalic acid, H2C2O4, solution? For oxalic acid, Ka1=5.6x10^-2 and Ka2=5.1x10^-5

  92. physical sciences

    with the use of calculations explain how would you prepare a 250ml of 0,2dm³ concentration solution of oxalic acid

  93. chemistry

    The formula weight of an acid is 82. In a titration, 100cm3 of the solution of this acid containing 39g of this acid per litre were completely neutralized by 95 cm3 of aqueous naoh containing 40g of naoh per litre. What is the basicity of this acid? Bob

  95. science

    two solutions A and B are provided to you. A is a solution of M/50 potassium permanganate. B is a solution of hydrated sample of oxalic acid per 100 ml. calculate the percentage of water of crystallization in hydrated sample of oxalic acid. . . pls reply

  96. Chemistry

    A sample of concentrated H2 S o4 is 95.7% of H2 S o4 by weight and its density is 1.84 gram per ml how many gram of pure H2 S o4 are contained in 1 litre of acid

  97. applied chemistry

    a 69.3g sample of oxalic ac acid, H2C2O4, was dissolved in 1.000L of solution. How would yo prepare 1.00L of 0.150M H2C2O4 from this solution?

  98. chemistry

    Oxalic acid (H2C2O4) can be used to remove rust according to the following balanced equation: Fe2O3 + 6H2C2O4 --> 2Fe(C2O4)33- +3H2O + 6H+ Calculate the number of grams of rust that can be removed by 5.00 x 102 ml of a 0.122M solution of oxalic acid.

  100. physics

    prepare a standard solution of oxalic acid with a concentration of 0.05mol.dm3. a report of the investigation. give the aim, apparatus, method and results.

  101. Chem 100L

    Calculate the molarity of an aqueous NaOH solution if 32.00ml of it is required to titrate .6789g of oxalic acid to a phenophthalein end-point. the balanced chemical equation is H2C2O4 + 2NaOH ---> Na2C2O4 + 2H2O

  102. Chemistry Help.......

    Sulfuric Acid (H2SO4) is a strong acid, which dissociates when dissolved in water according to the following equation: H20SO4(aq)-> 2H+(aq) + SO4 2- (a) A 0.21g sample of sulfuric acid is dissolved completely in sufficiebt water to make 0.25litre of the

  103. chemistry

    Calculate the mass of oxalic acid needed to prepare 150 ml of 0.442 M C2H2O4

  105. chemistry

    Calculate the mass of oxalic acid needed to prepare 150 ml of 0.442 M C2H2O4.

  106. Science

    In chemistry lab the following chemicals are placed in table shelf. 1, Methyl orange, 2, 0.1 M acetic acid, 3, 0.1 KMnO4, 4, Distilled water, 5, Pure NaCl. 6, A Solution A,containing 8 grams of mixture of oxalic acid and sodium oxalate dissolved in 800mL

  107. chemistry

    If you add a metal piece to excess acid, what of listed factors below will increase, decrease, or have no impact on how fast a reaction happens? a) lower molarity (concentration) of a solution b) higher molarity (concentration)of a solution c) increase

  108. Chemistry

    25ml of sulfuric acid from a car battery was accurately diluted to 500ml. 25ml of the diluted solution was titrated with 0.206 mol/L sodium hydroxide. It required 38.8 ml. Calculate the Molarity of the original battery acid and it's concentration in grams

  110. Nuhu Bamali Poly zaria Nig

    Chemistry volumetric analysis. B is a solution of Na2CO3 containing 5g/dm3. A is a solution of oxalic acid of uknown concentration 25cm3 of 25.25,25.0 and 24.80 respectively (I) Calculate the average volume of acid used (II) The molar concentration of

  111. Chemistry

    Help me with this; For the second part of the analysis,you will be provided with hydrated crystal of oxalic acid (H2C204. 2H2O). weigh out accurately about 1.575g of oxalic acid in a weighing bottle. Dissolve the acid in a beaker, then transfer the

  112. science

    30 ml KMnO4 solution is required to titrate 25 ml M/50 oxalic acid solution.find the molarity of KMnO4 solution and g/L also.

  113. chemistry

    If 8.72 grams of oxalic acid, H2C2O4, a diprotic acid, is neutralized when 23.4 mL of a solution of KOH is added, what is the molarity of KOH? the topic is acid-base triation, and i have already converted the mass to moles,but I am having trouble finding

  115. chemistry

    I am in the process of calculating the hydrogen ion concentration in a .25litre solution of sulfuric acid,.21g of sulfuric acid was disolved in water to make the solution. I have calculated the molarity of the acid to be 2.14x10^-3 mol per litre. I also

  116. Chemistry

    The LD50 for oxalic acid in rats is 375 milligrams oxalic acid/kilogram of body weight. Assume that the LD50 for oxalic acid in humans is the same and calculate the oxalic acid LD50 dose for a 160lb human? My calculations: 375mg/kg•1kg/2.20lb • 160lb/1

  117. chemistry

    1. if 15.0mL of 4.5 M NaOH are diluted with water to a volume of 500mL, what is the molarity of the resulting solution? 2. in a acid-base titration, 33.65mL of an 0.148 M HCL solution were required to neutralize 25.00mL of a NaOH solution. What is the

  118. 12th grade

    A perchloric acid solution is composed of 168.75 g of perchloric acid and 81.25 mL of pure water. What is the percent by mass of the perchloric acid solution? The density of water is 1.000 g/mL. When I did this part I got 67.5% But, I am having trouble

  120. Chemistry

    4 Questions on molarity that I really don't understand. I have the formulas, but they don't seem to fit in to the question right. Please take a look, thanks! 1. Calculate the weight, in grams, of HNO3 present in 1.0 litre of 0.10M of solution. 2. What is

  121. CHEMISTRY

    HOW MANY GRAM-EQUIVALENT ARE CONTAINED IN 1.8909 G OF CHEMICALLY PURE OXALIC ACID

  122. Chemistry (organic)

    You have a solution that contains 5.0 g of oxalic acid dissolved in 150 mL of water. This solution is placed in a separatory funnel, and then 100 mL of diethyl either is added to the separatory funnel and an extraction is performed (diethyl ether and water

  123. bio chem

    Explain how to prepare 1L of a buffer at pH 7.4 using 1M hypochlorous acid (Ka = 3.5 x 10-8) and a 1 M NaOH solution. Indicate the volume of hypochlorous acid and sodium hydroxide to use. pH = pKa + log ([A-]/[HA]) Ka= [H+][A-]/[HA] Molarity = moles/L

  125. AP CHEMISTRY

    Please could you help me predict the products of the following reactions: ( I cant figure them out) THANX in advance! 1) CaO powder is added to distilled water. 2) Acetic acid solution is added to solid sodium hydrogen carbonate. 3) Potassium permanganate

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20