calculate the volume of water in mL needed to make 75% solution containing 50g of CaCl2
110,842 results
Chemistry
what volume, in L, of a 10.0M HCL solution is needed to make 2.00L of 2.00m HCL solution by dilution with water. Thank you

chemistry
A solution is prepared by dissolving 23.7 g of CaCl2 in 375 g of water. The density of the resulting solution? is 1.05 g/ml. the concentration of CaCl2 is ________% by mass. answer: 5.94 can someone tell me the steps?

AP Chem
A 3.50 g sample of KCl is dissolved in 10.0 mL of water. The resulting solution is then added to 60.0 mL of a 0.500 M CaCl2(aq) solution. Assuming that the volumes are additive, calculate the concentrations of each ion present in the final solution.

Physics  ice to liquid
Fifty grams of hot water at 80oC is poured into a cavity in a very large block of ice at 0oC. The final temperature of the water in the cavity is then 0oC. Show that the mass of ice that melts is 50 g. To melt ice to 50g of water, I think that it will

Chemistry
Consider the dissolution of CaCl2. CaCl2(s) Ca2+(aq) + 2 Cl(aq) ÄH = 81.5 kJ A 10.4g sample of CaCl2 is dissolved in 102 g of water, with both substances at 25.0°C. Calculate the final temperature of the solution assuming no heat lost to the

chemistry
A 2.500×10−2M solution of NaCl in water is at 20.0∘C. The sample was created by dissolving a sample of NaCl in water and then bringing the volume up to 1.000 L. It was determined that the volume of water needed to do this was 999.3mL . The density of

chemistry
What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what

Chemistry
Concentrated sulfuric acid is 18.4 molar and has a density of 1.84 grams per milliliter. After dilution with water to 5.20 molar the solution has a density of 1.38 grams per milliliter. This concentration of H2SO4 is often used in lead storage

Chemistry
Prepare a theoretical titration curve for titration of 25.0 mL of 0.1037 formic acid (HCOOH; pKa = 3.75) solution (diluted to 100 mL volume with deionized water) by 0.0964 M solution of KOH. I have to determine volume of KOH needed to reach equivalence

chemistry
A solution of CaCl2 is prepared by dissolving 1.004 g of the solid in approximately 30 mL of water. How many moles of CaCl2 does this solution contain?

Chemistry
A 230.mL sample of a 0.280 M CaCl2 solution is left on a hot plate overnight; the following morning, the solution is 1.10 M. What volume of water evaporated from the 0.280 M CaCl2 solution?

Chemistry HW!!!
1. If I dilute 75 mL of 0.50 M CaF2 solution to a final volume of 375 mL, what will be the molarity of the resulting solution? 2. What will be the final volume of the solution be if I start with a 250 mL of 1.38 M MgCl2 solution to make a solution with a

science
the teacher instructed three students A,B,and C respectively to prepare a 50% (mass by volume) solution of sodium hydroxide (NaOH). 'A' dissolved 50 g of NaOH in 100 ml of water B dissolved 50g of NaOH in 100g of water while C dissolved 50g of NaOH in

Chemistry
If the molality of a CaCl2 solution is .100 mol/kg, and was made from 500.0 mL of water, how many grams of CaCl2 were needed to make the solution? Step by step would be appreciated!

Chem!!
Consider the dissolution of CaCl2: CaCl2(s) > Ca2+(aq) + 2Cl(aq) ΔH=81.5 kJ/mol An 11.0 gram sample of CaCl2 is dissolved in 125 g water with both substances at 25.0 °C. Calculate the final temperature of the solution assuming the solution

chem
How many grams of CaCl2 (molar mass = 111.0 g/mol) are needed to prepare 4.44 L of 0.500 M CaCl2 solution?

chemistry
If 2.1 moles of CaCl2 are dissolved in enough water to make a 0.92liter solution, what is the resulting molarity? 0.44 M CaCl2 0.70 M CaCl2 2.3 M CaCl2 3.0 M CaCl2

Chemistry HELP!!!
Only one question, it would be greatly appreciated if you would help me Thanx In an experiment, Na2CO3(aq) was added to 25.0 mL of CaCl2(aq) solution until no more precipitate was formed. The mass of precipitate produced was 2.50 g. Some statements about

chem
Calculate the final concentration of a. 4.0 L of a 4.0 M HNO3 solution is added to water so that the final volume is 8.0L b. Water is added to 0.35L of a 6.0M KOH solution to make 2.0L of a diluted KOH solution. c.A 20.0 mL sample of 8.0% (m/v)NaOH is

Chemistry
What volume of .300 M CaCl2 is needed to react completely with 40.00 Ml of .200 M H2PO4. according to the following equation 3 CaCl2 (aq) + 2 H3PO4 (aq)> Ca3(po44)2 + 6 HCL (aq)

Chemistry
Concentrated sulfuric acid is 18.4 molar and has a density of 1.84 grams per milliliter. After dilution with water to 5.20 molar the solution has a density of 1.38 grams per milliliter. This concentration of H2SO4 is often used in lead storage

Chemistry
Urgent... Someone please help!! Can someone please check to see if I am doing these correctly, I have a test tomorrow... Thank you :) Q) Calculate the new molarity of a 35mL sample of 0.450 M CaCl2 solution that is diluted with enough water to make 250 mL

chemistry
I collected questions from my book which I don't understand plz help me I am stuck plzz.!!!!!!!! Three different solutions containing the same solute at the same temperature are made to be saturated. Beaker 1 has 200.0 mL, beaker 2 has 500.0 mL and beaker

Chemistry
How many grams of CaCl2 are needed to make 100ml of a 15% solution in water if only the dihydrated (CaCl2 •2H20) salt is available?

Chemistry
Dissolving solid CaCl2 H2O in a large volume of water is endothermic to the extent of 14.6 kj/mol. Also given: CaCl2(s)+6H2O(l)>CaCl2* 6H2O(s) delta H = 97.0 kj what is the heat of solution of anhydrous CaCl2 in a large volume of water?

Chemistry
The ΔH per mole of CaCl2 is 81.0 kJ. Calculate the final temperature of an aqueous solution if 30 g of CaCl2 are added to 100 g of water at 23oC. Assume that the specific heat of the solution is the same as that of water

ChemistryDrBob222
Concentrated sulfuric acid is 18.4 molar and has a density of 1.84 grams per milliliter. After dilution with water to 5.20 molar the solution has a density of 1.38 grams per milliliter. This concentration of H2SO4 is often used in lead storage

Chemistry
A 0.25 M CuSO4 solution is required. A student is given 60 grams of copper sulphate. Calculate the volume of water needed to dissolve copper sulphate crystals and make this solution.

science
how would you make 500.0mL of a 0.200M NaOH solution from a 15.0 M stock NaOH solution?? I assume that you want the volumes rather than the mechanics of carrying it out? a) How many moles do you need in the 500 ml to have 0.200 M? b) What volume of 15.0 M

GEN CHEM
A solution of CaCl2 is prepared by dissolving 1.004 g of the solid in approximately 30 mL of water. How many moles of CaCl2 does this solution contain?

chemistry
1. How many grams of calcium chloride (CaCl2) are there in 600.0 mL of an aqueous solution that has a concentration of 0.450 M CaCl2? 2. The conjugate base of HS is: 3. What mass of calcium chloride, CaCl2, is needed to prepare 3.65 L of a 1.75 M

Chemistry
How mush CaCl2, in grams, is needed to make 2.0 L of a 3.5M solution? g CaCl2 = (2.0L) *( 3.5 mol Cl/1L) * (1mol CaCl2/ 2mol Cl) *( 110.98 g CaCl2/ 1 mol CaCl2) = 5.549 g CaCl2 i don't think i did any of this right

chemistry
calculate the value of water that is needed to dissolve 1.11 g of CaCl2 in order to prepare a 0.0250 M CaCl2 solution?

science
the teacher instructed three students A,B,and C respectively to prepare a 50% (mass by volume) solution of sodium hydroxide (NaOH). 'A' dissolved 50 g of NaOH in 100 ml of water B dissolved 50g of NaOH in 100g of water while C dissolved 50g of NaOH in

Chemistry
Based on the following equation: 2AgNO3 + CaCl2 > 2AgCl + Ca(NO3) When 50 g AgNO3 are combined with 1.45M CaCl2 solution, what volume of the 1.45M CaCl2 solution would be needed to precipitate all of the silver as AgCl?

chemistry
What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what

Chemistry
Using calculations, determine how you would make a 525 ml pg a 0.50 M solution of Cl ions using CaCl2. I am unsure how to do this question, I was going to use C1V1=C2V2 but with this I would be missing the first part of the equation. If that is the case,

chemistry
Calculate the molarity of a solution that is prepared by dissolving 23.35g of CaCl2 in a sufficient amount of water to make a 600 mL solution.

Chemistry
How much CaCl2.6H2O and water must be weighed out to make 100 g of a solution that is 5% CaCl2 by mass? Thanks to anyone who explains this to me

chemisty problem help
Carbon12 contains 6 protons and 6 neutrons. The radius of the nucleus is approximately 70 pm. Calculate the volume of the nucleus and the volume of the atom. What percentage of the carbon atom's volume is occupied by the nucleus? Can someone tell me how

cHEM
cThe price of gold is $625 per troy ounce at this writing. How much heat (in J) is needed to raise the temperature of $5000.00 worth of gold from 29.5 oC to 70.5 oC? (1 troy oz = 31.10 g and the specific heat of Au is 25.42 J/(moloC).) I got 5.125, which

Chemistry
How would you prepare 165 mL of a 0.976 M NaOH solution, starting with a 6.36 M stock solution? Volume of solution needed? Volume of water needed?

chemistry
What mass of CaCl2(s) must be dissolved in pure water at 10 degrees celsius to make a 26.3 mL solution and to increase the solution temperature to 16.4 degrees celcius? assume solution has same physical properties as water. deltaH of solution = 82.8

Chemistry
calculate the volume of the 3.0 M stock solution needed to make a diluted 30mM solution in 400ml

Chemistry
158.5 mL of a AgNO3 solution at 5.0M was combined with a 3.5M CaCl2 solution. 110.5g of AgCl was recovered. Given that the CaCl2 is the limiting reagent, how many milliliters of the 3.5M CaCl2 solution was used?

Chemistry
CaCl2(s) > Ca(aq) + 2Cl(aq) ΔH_rxn = +198.0 KJ "If that g sample of calcium chloride was dissolved in 1000.0g of water, with both substances originally at 25.0C, what would be the final temperature of the solution be? Assume no loss of heat to the

Chemistry
A solution contains 1.694 mg of CoSO4 (MW 155.0) per mL. Calculate a) The volume of 0.008640 M EDTA needed to titrate a 25.00 ml aliquot of this solution. Step 1. 0.001694g * 25ml * 1/155 g/mol= 0.0002732 mol Step 2. Volume of EDTA needed = 0.0002732 mol/

science
How much sugar must be added to 50g of water to make a saturated solution at 0 degrees?!

chemistry
calculate the volume of water in mL needed to make 75% solution containing 50g of CaCl2

chemistry
What volume of 15.00 M CaCl2 solutions is needed to make 3.000 gallons of 5.500 M CaCl2 solution ?

Math
1. Calculate the amount of fluorescein (MW 332.31) you will need to make 10 mL of 15 mM solution in ethanol (EtOH). My answer:0.05 g 2.Using Equation C1V1=C2V2 calculate the volume of stock solution (15 mM) you need to make 1 mL of each working solution

Math
Calculate the amount of fluorescein (MW 332.31) you will need to make 10 mL of 15 mM solution in ethanol (EtOH). My answer:0.05 g 2.Using Equation C1V1=C2V2 calculate the volume of stock solution (15 mM) you need to make 1 mL of each working solution

Chemistry
How many grams of CaCl2 are needed to make 100ml of a 15% solution in water if only the dihydrated (CaCl2⋅2 H2O) salt is available?

Chemistry
Dissolving solid CaCl2 H2O in a large volume of water is endothermic to the extent of 14.6 kj/mol. Also given: CaCl2(s)+6H2O(l)>CaCl2* 6H2O(s) delta H = 97.0 kj what is the heat of solution of anhydrous CaCl2 in a large volume of water?

science
if 50g of MgCl2 and 50g of 0.6M NH4OH are added enough water to make 1 litre solution, how much NH4Cl in gram should be added to the solution to prevent precipitation of Mg(OH)2 (assume no change in volume) given Ksp for Mg(OH)2 is 8.9x10^12 and

Chemistry/maths
Using the following stock solutions: NaCl, 100mmol KCl, 200mmol CaCl2, 160mmol Glucose, 5mmol Calculate the volumes of each stock solution and the volume of water needed to prepare 100ml of a single solution containing NaCl at 5.0mmol KCl at 2.5mmol CaCl2

chemistry
A 2.500×10−2M solution of NaCl in water is at 20.0∘C. The sample was created by dissolving a sample of NaCl in water and then bringing the volume up to 1.000 L. It was determined that the volume of water needed to do this was 999.3mL . The density of

chemistry
What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what

science
C respectively to prepare a 50% (mass by volume) solution of sodium hydroxide (NaOH). 'A' dissolved 50 g of NaOH in 100 ml of water B dissolved 50g of NaOH in 100g of water while C dissolved 50g of NaOH in water to make 100ml of ...

Chemistry
calculate the volume needed to make 2.20 x 10^2 ml of 0.100M cacl2. what would be the total concentration of the final (Cl) alone?

chemistry URGENT (1)
What mass (in grams) of CaCl2(s) must be dissolved in pure water at 10.0 deg Celsius to make a 26.4 mL solution and to increase the solution temperature to 16.4 deg Celsius? Assume that there is no heat loss from the solution and that the solution has the

chemistry
What mass (in grams) of CaCl2(s) must be dissolved in pure water at 10.0 deg Celsius to make a 26.4 mL solution and to increase the solution temperature to 16.4 deg Celsius? Assume that there is no heat loss from the solution and that the solution has the

Chemistry
Can someone please check to see if I am doing this correctly. Thank you :) Q) Calculate the new molarity of a 35mL sample of 0.450 M CaCl2 solution that is diluted with enough water to make 250 mL of solution. A) 0.450 m CaCl2 x 35mL/250mL = 0.063 mL

Chemistry
If 0.0365 mol of CaCl2 is dissolved in water to make a 0.640 M solution, what is the volume of the solution?

chemistry
Calculate the mass CaCl2 · 6 H2O needed to prepare of 0.123 m CaCl2(aq), by using 373 g of water. Answer in units of g.

chemistry
Calculate the mass CaCl2 · 6 H2O needed to prepare of 0.123 m CaCl2(aq), by using 373 g of water. Answer in units of g.

chemistry
Consider the dissolution of CaCl2. CaCl2(s) Ca2+(aq) + 2 Cl(aq) ΔH = 81.5 kJ A 13.0 g sample of CaCl2 is dissolved in 134 g of water, with both substances at 25.0°C. Calculate the final temperature of the solution assuming no heat lost to the

Chemistry
Consider the dissolution of CaCl2. CaCl2(s) Ca2+(aq) + 2 Cl(aq) ÄH = 81.5 kJ A 12.4 g sample of CaCl2 is dissolved in 100. g of water, with both substances at 25.0°C. Calculate the final temperature of the solution assuming no heat lost to the

Chemistry
A solution is made by dissolving 10.9 g of calcium chloride, CaCl2,in enough water to make exactly 500 mL of solution. What is the concentration (molarity) of CaCl2 in mol/L?

Chemistry
Calculate the new molarity of a 20.0 mL sample of 0.550 M CaCl2 solution that is diluted with water to make 250 mL of solution.

chemistry
Calculate the molarity of a solution that is prepared by dissolving 23.35g of CaCl2 in a sufficient amount of water to make a 600 mL solution

Chemistry
Please help me with this question: Calculate the theoretical yield amount of CaCl2 that would be required to change the temp of 50ml of water from room temp 20degree to 45 degrees. Heat Capacity H20 is 4.184 Jg^1deg^1 and density is 1g/mL. I've already

Chemistry
Please help me with this question: Calculate the theoretical yield amount of CaCl2 that would be required to change the temp of 50ml of water from room temp 20degree to 45 degrees. Heat Capacity H20 is 4.184 Jg^1deg^1 and density is 1g/mL. I've already

chemistry
how do you calculate the molaarity of a water solution of CaCl2, given that 5.04 L of the solution contains 612 g of CaCl2.

chemistry
Calculate the solubility of Cacl2 in g/L based on the experiement. Given 650g of CaCl2 added to 1.0L and allowed to dissolve as much as possible. While the remaining solid CaCl2 is filtered out of the solution and found to have a mass of 5.509g. What is

Chemistry
If you were to prepare a 1.00 molal solution of CaCl2 beginning with water at 27.0 C, what would the final temperature of the solution be (in C)? Assume that the specific heats of both pure H2O and the solution are the same, 4.18 J/K*g. The dissolution of

was not in class bio/ math
Preparing a Solution: A. Calculate the amount of methylene blue chloride (MW = 319.8 g/mol) needed to make 50 ml of a 10 mM stock solution. (Show calculations below) B. If you wanted to then dilute the solution from Part A to a final concentration of 0.1mM

Chemistry
calculate the volume of the 3.0 M stock solution needed to make a diluted 30mM solution in 400ml

chemistry
g)How many grams of agarose are needed to make 100 ml of 2.5% agarose solution?. h) Calculate the volume of buffer to which 500mL of 40 mM potassium chloride solution must be diluted to make a new concentration of 0.001M.

Chemistry
Can someone please check my work? Calculate the mass of (NH4)2S2O8 needed to prepare 250mL of a 0.100M solution. I got 5.705 g. Calculate the volume of 2.00M KI needed to prepare 250mL of a 0.200M solution. I got 0.025L or 25mL. Calculate the volume of

Chemistry
CaCl2(s) Ca2+(aq) + 2 Cl(aq) H = 81.5 kJ A 14.0 g sample of CaCl2 is dissolved in 130. g of water, with both substances at 25.0°C. Calculate the final temperature of the solution assuming no heat lost to the surroundings and assuming the solution has a

Chemistry
Calculate the volume of 2.45 M NaI that would be needed to precipitate all of the Hg+2 ion from 185 mL of a 2.44 M Hg(NO3)2. AND Calculate the molarity of an acetic acid solution if 47.81 mL of the solution is needed to neutralize 147 mL of 1.32 M sodium

chemistry
how many grams of cacl2 are needed to prepare 6.00L of a 0.400M CaCl2 solution

Chemistry
1.How many grams of KCl is in 225 mL of a 0.452 M solution? 2.What volume in mL of 0.555 M solution contains 85.0g Na2SO4? 3.How many grams of CaCl2 would be dissolved in 2.0L of a 0.10 M solution of CaCl2? Can you please show me how to do these problems?

Chemistry
Calculate the concentration, in molarity, of a solution prepared by adding 9 mL of water to 1 mL of 0.1 M HCl solution. If 2.0 mL of 0.010 M NaOH is mixed with enough water to make the total volume 8 mL, what is the molarity of the resulting solution?

chemistry
When 25 mL of C2H5OH (density 0.80 g.cm3) is dissolved in water to prepare a 250 mL solution, the density of the solution was found to be 0.950 g.cm3. Calculate a. Molarity of pure ethanol; b. Molarity of ethanol in the final solution; c. Volume of the

Shawn
How many milliliters of 0.355 M NaF solution are needed to react completely with 24.6 mL of 0.216 M CaCl2 solution? How many grams of CaF2 will be formed? The reaction is CaCl2(aq) + 2NaF(aq) → CaF2(s) + 2NaCl(aq)

Chemistry
A student must make 500 mL of a 1.5 M HCl solution. The student has plenty of water and a stock solution of 6.0 M HCl to use. What volume of the 6.0 M HCl solution must be added to what volume of water to make the desired 500 mL of 1.5 M solution? I don't

chem
158.5 mL of a AgNO3 solution at 5.0M was combined with a 3.5M CaCl2 solution. 110.5g of AgCl was recovered. Given that the CaCl2 is the limiting reagent, how many milliliters of the 3.5M CaCl2 solution was used? 2 sig figs

chemistry
What is the osmotic pressure of a solution prepared by dissolving 5.50 g of CaCl2 in enough water to make 420. mL of solution at 29.2°C?

chemistry
What is the osmotic pressure of a solution prepared by dissolving 5.80 g of CaCl2 in enough water to make 450. mL of solution at 24.7°C?

chemistry
23.9 g of CaCl2 (MM = 111.0 g/mol) is dissolved in enough water to make 300. mL of solution. What is the molarity of the solution?

Chemistry
Q) Calculate the new molarity of a 35mL sample of 0.450 M CaCl2 solution that is diluted with enough water to make 250 mL of solution. A) M1V1 = M2V2 M1 = 0.450 M2 = ? V1 = 0.035 L V2 = 0.250 L M2 = M1 X V1/V2 0.450 X (0.035L/0.250L) = 0.063 Did I set this

Chemistry
calculate the mass ratio of 25% cacl2 solution and water to prepare 500 g of a 5% salt solution

chemistry
A 7.00 g sample of KCl is dissolved in 81.0 mL of water. The resulting solution is then added to 28.0 mL of a 0.790 M CaCl2(aq) solution. Assuming that the volumes are additive, calculate the concentrations of each ion present in the final solution.

chemistry
Determine the volume (in mL) of a 0.184 M CaCl2 solution that would be required to obtain 73.4 g of CaCl2.

Science
How much sodium hydroxide, at what concentration, do I need to add to 500 mL of 0.1 N HCL to obtain pH 6.8. How do you calculate this? pH = log(H^+) M HCl = N HCl mols = M x L. After you know mols HCl you have, then make a solution of NaOH and calculate

Chemistry
How many grams of CaCl2 * 6H2O are required to make 500 milliliters of a solution having the same concentration of Cl as one that was prepared by dissolving 75.6 grams of NaCl in enough water to make exactly 1 liter of solution?

chemistry
Hi! i'm kinda having trouble getting this.. Don't understand it really from Ca(OH)2 + 2HCl> CaCl2 + 2H2O How do i calculate Ca+? :You need much more information. 1) do you mean the concentration of Ca+ ion? 2) is there excess HCl? What is given? ok It

CHEM
A 3.5g sample of potassium chloride(KCl)is dissolved in 10mL of water.The resulting solution is the added to 60mL of a 0.5M CaCl2 soltion. Assuming that the volume are additive,calculate the molar concentration and %w/v of each ion present in final