an immersion heat can supply heat at a rate of 5.2 x 10 to the power of 2 joules per second. calculate the time that it wil take to completly evaporate 1.25 x 10 to the power of minus 1

40,502 results
  1. Chemistry

    Consider the following reaction: 2Fe2O3 --> 4Fe + 3O2 ∆Hrxn° = +824.2 kJ The decomposition of 29.0 g of Fe2O3 results in a. the release of 150 kJ of heat b. the release of 12000 kJ of heat c. the absorption of 12000 kJ of heat d. the absorption of 150

  2. Physics

    How much heat is added to a 10.0 g of ice at -20.0 degrees Celsius to convert it to steam at 120.0 degrees Celsius? compute and add the following heats: heat to heat ice from -20C to 0C heat to melt ice at 0C Heat to heat water from 0 to 100C heat to

  3. Chemistry - Heat of Fusion of Ice

    Conclusion question(s) from a lab we did to find the heat of fusion of ice: Does the value obtained for the molar heat of fusion depend on the volume of water used? Does it depend on the mass of ice melted? Does it depend on the final temperature of the

  4. Biology

    What's high specific heat is mainly a consequence of the: A) high specific heat of oxygen and hydrogen atoms B) inability of water to dissipate heat into dry air D) absorption and release of heat when hydrogen bonds break and form E) fact that water is a

  5. physics

    A heat pump has a coefficient of performance of 4.5. If the heat pump absorbs 46.1 cal of heat from the cold outdoors in each cycle, what is the amount of heat expelled to the warm indoors? (in cal) tried everything but got nothing.

  6. PHYSICS NEED HELP FAST

    A power plant has a power output of 1055 MW and operates with an efficiency of 33.0 percent. Excess energy is carried away as heat from the plant to a nearby river that has a flow rate of 1.1 x 10^6 kg/s. How much energy is transferred as heat to the river

  7. Chemistry

    Calculate the total quantity of heat required to convert 25.0 g of liquid CCl4(l) from 25.0°C to gaseous CCl4 at 76.8°C (the normal boiling point for CCl4)? The specific heat of CCl4(l) is its heat of fusion is and its heat of vaporization is

  8. Chemistry

    55 kJ of heat are added to 200 kg of a metal at 28.00◦C and the temperature rises to 29.18◦C. What was the metal? 1. tungsten (specific heat = 0.134 J/g · ◦ C) 2. copper (specific heat = 0.385 J/g · ◦ C) 3. silver (specific heat = 0.233 J/g ·

  9. Thermodynamics

    A lawnmower tractor engine produces 18hp using 40kW of heat transfer from burning fuel. Find the thermal efficiency and the rate of heat transfer rejected to the ambient. I converted the power to 13.24kW then found the efficiency by dividing 13.24kW by

  10. Physical Science

    A 5.00 kg block of ice at –25 oC is converted to steam at 125 oC. How much energy (in kilojoules) is expended in this process? The following data are provided: a. Specific heat of ice = 2.092 J/g oC b. Latent heat of fusion = 334.72 J/g c. Specific heat

  11. physics

    A microwave oven has a power requirement of 1250 W. A frozen dinner requires 6.5 min to heat on full power. If the cost of electricity is 12 cents per kWh, how much does it cost to heat the dinner?

  12. PHYSICS HELP PLEASE

    How much heat has to be added to change 0.500 kg ice from -10C completely to a steam of 110C. The specific heat of ice, water and steam is 2090 J/kg ⋅K, 4186 J/kg⋅K, 2010 J/kg ⋅K respectively. Given that the heat J/kg, the heat of J/kg. Draw of

  13. Science

    Organisms that maintain a constant body temperature rely on the heat produced by cells. Where does this heat come from? A) Special metabolic pathways exist just for the production of heat. B) Mitochondria produce heat in the form of ATP. C) Plants store up

  14. physical science

    How many minutes would be required for a 310.0 W immersion heater to heat 202.0 g of water from 22.0°C to 95.6°C?

  15. Physics

    calculate the specific heat capacity of the materials for which the heat supply, mass, and temperature rises are given below: i)25200J, 0.3Kg,20K ii)8000J, 500g, from 20'C to 60'C iii)9450J, 150g, from 15'C to 45'C

  16. Physics

    An electric heater raises the temperature of 120g of water in a thin light vessel through 10K in 2mins, when placed in 70g of water contained in a metal vessel of mass 0.55kg the temperature rises through 9K in the same time. Calculate from the above:

  17. chem

    The heat of combustion of bituminous coal is 2.50 × 104 J/g. What quantity of the coal is required to produce the energy to convert 137.7 pounds of ice at 0.00°C to steam at 100.°C? specific heat (ice) = 2.10 J/g°C specific heat (water) = 4.18 J/g°C

  18. thermodynamics

    3.4 A heat engine operates between two heat reservoirs with temperatures of 560 and 280 K a) The heat engine itself has a temperature of 560 K during heat addition from the 560 K reservoir and a temperature of 280 K during heat rejection to the 280 K

  19. AP Chemistry

    Microwave ovens emit microwave radiation that is absorbed by water as heat. Suppose that the wavelength of the radiation that is 12.5 cm in an oven that has a power rating of 900 watts. (1W = 1 J/s) a) How many moles of photons are released per minute b)

  20. Physics

    How long does it take an immersion heater with a 500 W power rating to heat up 500 g of h2o from 15 c to 100 c if the water is in an aluminum cup with mass 200 g. the specific heat of aluminum is 99 j/ (kg K)

  21. Chemistry

    You want to heat 1 kg of water 10 degrees celsius and you have the following methods under consideration. The heat capacity of water is 4.184 J/K g. (a) You can heat it with a mechanical eggbeater that is powered by a 1-kg mass on a rope over a pulley. How

  22. physics

    A perfectly insulated cup is filled with water initially at 20C. Heat energy is transferred to the cup by an immersion heater at a steady rate. Sketch on the axes that follow the temp as a function of time. Explain the shape of your graph and write down a

  23. Science

    I'm going crazy! The heat necessary to change the state of water between a solid and a liquid is called the latent heat of vaporization, latent heat of solidification, latent heat of fusion, latent heat of liquefaction, or none of the above. I thought it

  24. PHYSICS

    Calculate the specific heat capacity of the materials for which the heat supply mass,and temperature rises are given below(i)2.5*10^4j,0.3kg,2k^-1 (ii)8*4^3j,500g from30'c to 50'c (iii)9.45*10^3g ,150g from15'c to 45'c

  25. science

    an aluminium container of mass 100g contains 200 g of ice at -20'c heat is added to the system at the rate of 100 cal/sec. what will be the final tmperature of the mixture after 4 min? given:specific heat of ice:0.5 cal/gm'c ,latent heat of fusion:80

  26. Physics

    If the air temperature is the same as the temperature of your skin (about 30.0 oC), your body cannot get rid of heat by transferring it to the air. In that case, it gets rid of the heat by evaporating water (sweat). During bicycling, a typical 70.0kg

  27. physics

    an electric heater raises the temperature of 120g of water in a thin light vessel through 10K in 2mins, when placed in 70g of water contained in a metal vessel of mass 0.55kg the temperature rises through 9K in the same time. Calculate from the above:

  28. Chemistry

    A 500kg steel boiler is used to convert 200kg of water into steam. Calculate the total energy required to heat both the steel and its' contents from 20.0°C to 100.0°C. The specific heat capacity of the steel is 0.528J/g°C. Heattotal= heat steel + heat

  29. Chemistry

    What quantity of heat is necessary to convert 50.0 g of ice at 0.0 C into steam 100,0 C? The heat of fusion is 80.0 cal/g, the heat of vaporization is 540 cal/g, and the specific heat of water is 1.00 cal/gC.

  30. Physics

    A black wood stove with surface area 4.6 m^2 is made from cast iron 4.0 mm thick. The interior wall of the stove is at 650 C, while the exterior is at 647 C. Part A What is the rate of heat conduction through the stove wall? Part B What is the rate of heat

  31. Chemistry

    Consider the following reaction. 2Fe2O3 --> 4Fe+3O2 Hrxn=+824.2 The Formation of 21.0 of Fe results in 1)the release of 77.5 kJ of heat. 2)the absorption of 3.10 × 102 kJ of heat. 3)the release of 4330 kJ of heat. 4)the absorption of 77.5 kJ of heat.

  32. Lauren

    The amount of heat required to raise temperature of 55.85 g of iron 1 degrees C is called its A. Change of energy B. Enthalpy C. Molar heat capacity D. Specific heat capacity E. Specific Heat.

  33. Chemistry

    Search: How much energy (in Kj) is relased when 25.0g of ethanol vapor at 93, is cooled to -10? Ethanol has a melting point of -114.5, bp of 78.4, specific heat= 2.10J/g, heat of fusion =4.60Kj/mol, specicic heat= 1.9j/g, heat of vaporization = 38.56Kj/mol

  34. physics

    an immersion heat can supply heat at a rate of 5.2 x 10 to the power of 2 joules per second. calculate the time that it wil take to completly evaporate 1.25 x 10 to the power of minus 1 kg water initially at a temperature of 21 degrees celsius

  35. physics

    At a fabrication plant, a hot metal forging has a mass of 78.5 kg and a specific heat capacity of 426 J/(kg C°). To harden it, the forging is quenched by immersion in 788 kg of oil that has a temperature of 30.3 °C and a specific heat capacity of 2770

  36. physics

    when a power station converts chemical or nuclear energy to electrical energy it converts about 50% of the energy to low grade heat suggest how people could use this energy before the power station operators allow it to enter the environment. why is this

  37. IPC

    The specific heat of gold is 0.031 calories/gram°C and the specific heat of silver is 0.057 calories/gram°C. If equal amounts of each metal are exposed to equal heating, which will heat up faster? The answers are: 1) The silver will heat up almost twice

  38. physics

    (a) How much waste heat is produced by an electrical power station that uses 1.05 multiplied by 1014 J of heat input with an efficiency of 40.0%? (b) What is the ratio of waste heat to work output? (c) How much work is done?

  39. chemistry

    how much heat is required to completely vapporize 2.3 grams of ice starting at -50 degrees Celsius? (the specific heat of ice is 2.0 J/g.C; the specific heat of water is 4.184 J/g.C; the heat of fusion is 333 J/g; and the heat of vaporization is 22601 J/g)

  40. Physics question

    A naked person with a surface area of 1.55 meters squared and a skin temperature of 37.3 degrees is in a sauna room at T = 82.0 degrees. The person's skin has an emissivity of 0.910. She evaporates sweat from her body to balance the rate of heat absorption

  41. Chemistry - Heat of Fusion

    When water is frozen into ice cubes in the freezer, where does the released heat go? I think it just goes into the air in the freezer, nowhere special. Because won't the heat become cold air then? That's right. The heat just adds to the heat load that the

  42. Physics

    Just as no mechanical device can be 100% efficient, no heat engine can transfer 100% of its heat to a single object. Some of the heat energy must be wasted (released into the environment). We have a heat engine that produces 150 J of heat, does 40 J of

  43. science

    A microwave oven has a power requirement of 1248 W. A frozen dinner requires 6.9 min to heat on full power. (a) How much electrical energy (in kWh) is used? (b) If the cost of electricity is 12 cents per kWh, how much does it cost to heat the dinner?

  44. Physics

    Find the heat necessary to change 2.5kg of water (ice) at -2 degrees C to steam at 105 degrees C. specific heat ice= 2060 specific heat water= 4180 specific heat steam= 2020 heat of fusion= 3.34X10^5 heat of vaporization= 2.26X10^6

  45. physics

    A coolant fluid has a latent heat of evaporation of 234 kj/kg . If the pump rate is 2250g per minute. How much thermal heat is removed each hour?

  46. AP Physics B (Heat Engines)

    18. (II) At a steam power plant, steam engines work in pairs, the heat output of the first one being the approximate ehat input of the second. Th eoperating temeprautres of the first are 680 degrees C and 430 degrees C, and of the second 415 degrees C and

  47. Science: Physics

    We use an electric immersion heater to heat 2,0 liters water having temperature of 20C to the boiling point. Specific heat capacity of water is 4,19 kJ/(kg c). The power of the heater is 1,50 kW and efficiency of heating is 80 %. How much time does the

  48. Physics

    A small electric immersion heater is used to boil 191.0 g of water for a cup of instant coffee. The heater is labeled 355.0 W, which means that it converts electrical energy to heat at this rate. Calculate the time required to bring this water from 12.0°C

  49. Physics

    A small electric immersion heater is used to boil 191.0 g of water for a cup of instant coffee. The heater is labeled 355.0 W, which means that it converts electrical energy to heat at this rate. Calculate the time required to bring this water from 12.0°C

  50. Physics

    Cooling of an electronic power transistor is assisted by attaching it to an aluminium heat sink. The electrical power to be dissipated is 0.3 watts, the exposed surface area of the heat sink is 0.001m2, the convection heat transfer coefficient is 6.0

  51. Physics!

    At a steam power plant, steam engines work in pairs, the output of heat from one being the approximate heat input of the second. The operating temperatures of the first are 520°C and 320°C, and of the second 310°C and 170°C. If the heat of combustion

  52. Physics

    An electric immersion heater is rated 5 A when connected to a 120V circuit. What is the resistance of the heater? If it takes 168 KJ to heat 500 ml of water from 20 deg C to boiling, how long does it take to heat the water?

  53. Electricity - Plz Help!

    By considering a wire of radius 'r', lenght 'l' and resistivity 'e' through which a current I flows, show that a) the rate of production of heat by it is I^2*P*l / pi*r^2 b) the rate of loss of heat from its surface is 2pi*r*t*h , where 'h' is the heat

  54. Science

    Energy management has become a crucial field in increasing the efficiency of our everyday use of energy. One of the most energy consuming activities is the boiling of water. In order to understand the energy consumption, you need to have understanding on

  55. Physics

    A fossil-fuel power plant that generates 1000MW of electrical power discharges 1600MJ per second as waste heat into the river. A)At what rate(in MW) is thermal energy obtained fromt the burning of coal? B)What is the thermal efficiency(power output/heat

  56. physics

    At a fabrication plant, a hot metal forging has a mass of 74 kg and a specific heat capacity of 430 J/(kg·C°). To harden it, the forging is quenched by immersion in 710 kg of oil that has a temperature of 32°C and a specific heat capacity of 3000

  57. physics

    At a fabrication plant, a hot metal forging has a mass of 66.8 kg and a specific heat capacity of 437 J/(kg C°). To harden it, the forging is quenched by immersion in 785 kg of oil that has a temperature of 25.0 °C and a specific heat capacity of 2770

  58. Physics

    #1.) A wind turbine has a Cp of 0.42 and extracts 50 kW of power when the wind velocity is 25 m/sec. How long are the blades? (ρ = 1.2 kg/m3) #2.) An electric hot water heater is used to heat 30 gallons of water from 20 °C to 45 °C. a. What heat energy

  59. Science

    1kg of water contained in a metal container is heated with 1me immersion heaterif the temperature roses from 25c to 45c in 100s what is the average rate of heat loss to the surroundings from the container during this time?

  60. Physics

    calculate the specific heat capacity of the materials for which the heat supply, mass, and temperature below: (i) 2.52 x 10^4j, 0.3 kg, 20 k (ii) 8 x 10^3j, 500g, from 20'c to 60'c (iii) 9.45 x 10^3j, 150g, from 15'c to 45'c

  61. Physical Science

    How many minutes would be required for a 269.0 W immersion heater to heat 292.0 g of water from 16.8°C to 97.4°C?

  62. physics

    calculate the specific heat capacity of the materials for which the heat supply, mass, and temperature rises are given below: i)25200J, 0.3Kg ii)8000J, 500g, from 20'C to 60'C iii)9450J, 150g, from 15'C to 45'C

  63. Physics

    My question is two parts How many calories of heat energy would it take to heat 200 mL of water from 20C to 80C? a) How long would it take to heat the water in the previous question using a heater with a power rating of 50W? Looking for equations to solve

  64. physics problem

    At body temperature the latent heat of vaporization of water is Lv = 2.26e3 kJ/kg. (a) A naked person with a surface area A = 1.55 m2 and a skin temperature = 37.3 degrees is in a sauna room at T = 82.0 degrees. The person's skin has an emissivity e =

  65. Physics ptoblem

    At body temperature the latent heat of vaporization of water is Lv = 2.26 ¡Ñ 103 kJ kg−1. (a) A naked person with a surface area A = 1.55 m2 and a skin temperature £c = 37.3 ¢XC is in a sauna room at T = 82.0 ¢XC. The person's skin has an emissivity

  66. Chemistry

    Consider the following properties of a particular substance: melting point: -7.2 degrees C boiling point: 58.8 degrees C heat of fusion: 10.571 kJ/mol specific heat of the solid: 87.4 J/mol degrees C specific heat of the gas: 40.0 J/mol degrees C specific

  67. Physics

    Sweating is one of the main mechanisms with which the body dissipates heat. Sweat evaporates with a latent heat of 2430 kJ/kg at body temperature, and the body can produce as much as 1.3 kg of sweat per hour. If sweating were the only heat dissipation

  68. Physics

    A portion of an electric circuit connected to a 7 ohm resistor is embedded in 1.20 kg of a solid substance in a calorimeter. The external portion of the circuit is connected to a 100 volt power supply. (a) Assuming that all the heat generated by the

  69. physics

    (a)(i) A heat engine takes in 1643 J of heat and releases 752 J of work to the environment in each cycle. How much work does the heat engine do in each cycle? (ii) What is the efficiency of this engine? (b) How much work is required to put into the heat

  70. Physics

    A circuit consists of a resistor of R=7 Ω, a capacitor of C=7 μF, and an ideal self-inductor of L=0.04 H. All three are in series with a power supply that generates an EMF of 5sin(ωt) Volt. The internal resistance of both the power supply and the

  71. physics

    A flow calorimeter is used to measure the specific heat of a liquid. Heat is added at a known rate to a stream of the liquid as it passes through the calorimeter at a known rate. Then a measurement of the resulting temperature difference between the inflow

  72. physics

    a. A power plant burns coal and generates an average of 610.0 Megawatts (MW) of electrical power while discharging 915.00 MW as waste heat. Find the total electrical energy generated by the plant in a 30-day period. b. Coals vary a lot in their energy

  73. physics

    A power plant burns coal and generates an average of 600.0 Megawatts (MW) of electrical power while discharging 900.00 MW as waste heat. Find the total electrical energy generated by the plant in a 30-day period. Coals vary a lot in their energy content.

  74. chemistry

    if the heat of combustion of glucose is -2808 kJ/mol, how many grams of glucose are required to supply 1650 kJ of heat?

  75. Nsuk

    (1)calculate the heat energy datas temperatures 100degree celciuse and 4degree celciuse,mass 0.5kg take latent heat of vapourisation 2.02times10raised to the power of minus6.(2)calculate the specific latent heat of fusion mass of calorimeter 0.01kg and

  76. Physics

    18. (II) At a steam power plant, steam engines work in pairs, the heat output of the first one being the approximate ehat input of the second. Th eoperating temeprautres of the first are 680 degrees C and 430 degrees C, and of the second 415 degrees C and

  77. phyical science

    A microwave oven has a power requirement of 1235 W. A frozen dinner requires 6.0 min to heat on full power. (a) How much electrical energy (in kWh) is used? 1 kWh (b) If the cost of electricity is 12 cents per kWh, how much does it cost to heat the dinner?

  78. physics

    An electric heater raises the temperature of 120g of water in a thin light vessel through 10K in 2mins, when placed in 70g of water contained in a metal vessel of mass 0.55kg the temperature rises through 9K in the same time. Calculate from the above:

  79. chemistry

    when burned, methane gives off heat at a rate of 342 J/g. How many kilojoules of heat will be given off when 4.50 kg burns?

  80. Physics

    If the air temperature is the same as the temperature of your skin (about 30 degrees Celcius), your body cannot get rid of heat by transferring it to the air. In that case, it gets rid of the heat by evaporating water (sweat). During bicycling, a typical

  81. science

    A microwave oven has a power requirement of 1235 W. A frozen dinner requires 6.0 min to heat on full power. (a) How much electrical energy (in kWh) is used? b) If the cost of electricity is 12 cents per kWh, how much does it cost to heat the dinner?

  82. Chemistry

    A Power plant rated at 800 MegaWatts generates steam at 585 K and discards heat to a river at 295 K. If thermal efficiency of plant is 70% of maximum value, how much heat is discarded to river at rated power? Please help with steps on how to solve this

  83. SCIENCE QUESTION

    LEAD IS A SOFT, DENSE METAL WITH A SPECIFIC HEAT OF 0.028KCAL/KGC, A MELTING POINT OF 328.0C, AND A HEAT FUSION OF5.5KCAL/KG. HOW MUCH HEAT MUST BE PROVIDED TO MELT A 250.0KG SAMPLE OF LEAD WITH A TEMPERATURE OF 20.0C? Figure the heat to heat if from 20C

  84. Physics

    What mass of ice at minus 14 degree Celsius will be needed to cool 200cm raise to power 3 of an orange drink (essentially) what mass of water from 25 degree Celsius to 10 centigrade? (Specific latent heat of fusion of ice is 3.36 raise to power minus ten

  85. material science

    How much heat (in BTU) would be required to heat and vaporize 100 lb of water from 25°C to saturated steam at 1 atm? Assume heat capacity is constant at 1 BTU/lb-°F and the latent heat of vaporization is 1,000 BTU/lb

  86. chemistry

    The heat of fusion of water is 335 J/g, the heat of vaporization of water is 2.26 kJ/g, and the specific heat of water is 4.184 J/deg/g. How many grams of ice at 0 ° could be converted to steam at 100 °C by 9,946 Joules of heat?

  87. science

    When you freeze water, 80 calories of heat are released into the surroundings for every gram of water that freezes. This is known as the "latent heat of fusion" of water, which is 80 cal/g. Heat of fusion is a characteristic property. Theoretically, if you

  88. Physics

    Help!!!! Please!!! The coefficient of performance of a refrigerator is defined as the ratio of heat extracted from the refrigeration compartment to the work required to operate the refrigerator. A certain refrigerator has a coefficient of performance of 4

  89. physics

    A coolant fluid has a latent heat of evaporation of 234 kj/kg . If the pump rate is 2250g per minute. How much thermal heat is removed each hour?

  90. chem

    The specific heat of silver is 0.237 J/goC Its melting point is 961oC . Its heat of fusion is 11 J/g. How much heat (in J) is needed to change 17.5 g of silver from solid at 25oC to liquid at 961oC ? Add the heat required to warm the silver from room temp

  91. Engineering

    A heated spherical ceramic object (diameter= 10cm), initially at 1200k, is held in a large enclosure whose walls are maintained at a temperature of 300k. The sphere has an emissivity of 0.7. Properties of Sphere: Density =4500 kg/m^3, heat capacity= 400

  92. physics

    A typical woman gives off heat at the rate of about 8000 calories per hour. How long would a woman have to stay in a bath of 60L (60,000g)of 26*C water in order to raise the water temperature to 30*C. Presume that all the heat given off by the woman is

  93. physics

    A typical woman gives off heat at the rate of about 8000 calories per hour. How long would a woman have to stay in a bath of 60L (60,000g)of 26*C water in order to raise the water temperature to 30*C. Presume that all the heat given off by the woman is

  94. physics

    A typical woman gives off heat at the rate of about 8000 calories per hour. How long would a woman have to stay in a bath of 60L (60,000g)of 26*C water in order to raise the water temperature to 30*C. Presume that all the heat given off by the woman is

  95. thermodynamics

    If a carnot engine receives heat from a heat source and discharge 1000J to a heat sink at temperature of 27C in each cycle, calculate the heat received and the work performed by the engine in each cycle

  96. Physicss

    a typical woman gives off heat at rate of about 8000 calories per hour. how long would a woman have to stay in a bath of 60L (60,000 g) of 26 C water in order to raise the water temperature to 30 c ? presume that all the heat given off by the woman is

  97. chemistry 101

    How much alcohol must be burned to generate 279kj of heat to warm the water as described in problem 3? (60F to 180F) I've seen where they say the answer is (mass of alcohol)(heat ofcombustion)=279 and you solve for mass. However how am I to know which heat

  98. Earth Science

    what is the driving force for the movement of the lithospheric plates? a- heat from the sun b- unequal distribution of heat within Earth c- heat in the atmosphere d- unequal distribution of heat from the oceans My answer is B

  99. univ. physics

    A heat pump has a coefficient of performance of 4.5. If the heat pump absorbs 46.1 cal of heat from the cold outdoors in each cycle, what is the amount of heat expelled to the warm indoors? (in cal)

  100. physics

    The rate of heat conduction out of a window on a winter day is rapid enough to chill the air next to it. To see just how rapidly windows conduct heat, calculate the rate of conduction in watts through a 3.00 m2 window that is 0.600 cm thick if the

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20