
a metal wire 1.0 mm in diameter and 2.0 m long hangs vertically with a 5.0 kg mass suspended from it. if the wire stretches 1.2 mm under the tension, what is the value of the young's modulus for metal?

A light rigid bar is suspended horizontally from two vertical wires, one of steel and one of brass. Each wire is 2.00m long. The diameter of the steel wire is 0.60mm and the length of the bar AB is 0.20m. When a mass of 10.0kg is suspended from the centre

A light rigid bar is suspended horizontally from two vertical wires, one of steel and one of brass. Each wire is 2.00m long. The diameter of the steel wire is 0.60mm and the length of the bar AB is 0.20m. When a mass of 10.0kg is suspended from the centre

A circular metal wire, with a radius of 0.5 mm, has a force of 2 kN applied along it. If the wire has an unstressed length of 3 m and stretches by 8 mm, what is Young’s Modulus for the metal? Give your answer in GPa. Any help would be very appreciated

A 4.0mlong steel wire has a crosssectional area of 0.050cm2. Its proportional limit has a value of 0.0016 times its Young's modulus. Its breaking stress has a value of 0.0065 times its Young's modulus. The wire is fastened at its upper end and hangs


A 2.2m of steel wire hangs vertically down from a support. A 1.5m length of brass wire of the same diameter is attached to the lower end of the steel wire.when a 10 kg mass is attached to the lower end of the brass wire a total extension of 0.05 m is

A wire of diameter 0.65mm and length 6.0m stretches 10mm when 5.5kg is hung from it. What is the Young's modulus for the wire and what is the effective spring constant for the stretching wire

a wire 100 cm long and 0.2 cm in diameter is suspended from a support. a 10 kg mass is hung from the lower end of the wire. a find the stress b find the strain c young's modulus of elasticity

in the searler's metod to determine the young's modulus of a wire , a steel wire of length 156cm and diameter 0.054cm is taken as experimental wire. the average increase in length for 1 1/2 kg wt is found to be o.o5o cm.Then young's modulus of the wire?

A wire with cross sectional area 1.00 cm2 stretches 0.500% of its length when it is stretched with a tension of 20.0 N. What is the Young's modulus of this wire?

Young's Modulus (Y) 20 X 1010 N/m2 Shear Modulus (S) 8.1 X 1010 N/m2 Bulk Modulus (B) 16 X 1010 N/m2 The table to the above represents various properties of steel. You have steel wire 4.9 meters in length that stretches 0.16 cm when subjected to a force of

A hanging wire made out of titanium with diameter 0.080 cm is initially 2.3 m long. When a 78 kg mass is hung from it, the wire stretches an amount 2.89 cm. A mole of titanium has a mass of 47.9 grams, and its density is 4.51 g/cm3. Based on these

A wire of 5.0m and diameter 2.0mm,extends by 0.25mm when a force of 50N was stretch it from it's end calculate a.the stress on the wire. b.the strain in the wire. c.the young's modulus of elasticity of the wire

A steel (Young's modulus 2.0 x 1011 N/m2) wire is strung between two supports attached to a ceiling. Initially, there is no tension in the wire when it is horizontal. A 98N picture is then hung from the center of the wire, as the drawing illustrates, so

A steel (Young's modulus 2.0 x 1011 N/m2) wire is strung between two supports attached to a ceiling. Initially, there is no tension in the wire when it is horizontal. A 88N picture is then hung from the center of the wire, as the drawing illustrates, so


1. Two identical 15.0 kg balls, each 25.0 cm in diameter, are suspended by two 35.0 cm wires as shown in the figure. The entire apparatus is supported by a single 18.0 cm wire, and the surfaces of the balls are perfectly smooth. Find the tension in the

Find the diameter of an 18 m(L) long steel wire that will stretch no more than.009 m AL when a load stress of 3800 N is hung on the end of the wire. The Young's Modulus for steel wire is 200 x 109 N/m2?

the area of cross section of a wire is 1/100000 m^2 length of the wire is increased by 0.1% a tension of 1000N is produced.the young's modulus of the wire will be? ans: 1.10^11 N/m^2

The Young’s modulus for steel is 20.7*1010 N/m2. How much will a 2.5 mm diameter wire 12 cm long, be strained when it supports a load of 450 N? Aluminum’s Young’s modulus is 6.9*1010 N/m2. Express the strain as a decimal, not a percentage What

An astronaut on a small planet wishes to measure the local value of g by timing pulses traveling down a wire which has a large mass suspended from it. Assume that the wire has a mass of 4.10 g and a length of 1.60 m and that a 3.00 kg mass is suspended

A steel wire 40 m long is suspended between two fixed points 20 m apart. A force of 375 N pulls the wire down at a point 15 m from one end of the wire. State the tension in each part of the wire. Texbook answer: 375N, 0N

(Q1)A wire of cross sectional area of 0.00006m2 and length 50cm stretches by 0.2mm under a load of 3000n.Calculate the Young's modulus for the wire (a)80000000000Nm2(b)125000000000Nm2(c)25000000000Nm2(d)5000000000Nm2 (Q2)a square plate of side 10cm is

A box is suspended by a steel wire via a frictionless pulley The wire has a mass per length of µ = 24.5 × 10 − 3 kg/m. The box is so heavy and the wire so thin that the mass of the wire does not influence the wire tension. The horizontal part of

can someone check? Which has greater volume: 1 kg of gold or 1 kg of water? a. The gold has greater volume. b. The water has greater volume. c. Gold and water have the same volume. Is it a? I know it's not b. The stones in an arch are . . . a. rarefied b.

1.A brass wire 80 cm long and 0.3 cm in diameter is used to hang an object weighing 6.5 x 10 ^5 dynes. Find stress, strain and young's modules. 2. To one end of a wire 1.2 m long and 0.4 cm in diameter is hung on object with a mass of 10 kg. The wire is


A 1.1 x 103kg house spider is hanging vertically by a thread that has a Young's modulus of 4.5 x 109 N/m2 and a radius of 16 x 106 m. Suppose that a 81kg person is hanging vertically on an aluminum (Young's modulus 6.9 x 1010 N/m2) wire. What is the

A 1.1 x 103kg house spider is hanging vertically by a thread that has a Young's modulus of 4.5 x 109 N/m2 and a radius of 16 x 106 m. Suppose that a 81kg person is hanging vertically on an aluminum (Young's modulus 6.9 x 1010 N/m2) wire. What is the

A 1.0 x 103kg house spider is hanging vertically by a thread that has a Young's modulus of 4.2 x 109 N/m2 and a radius of 18 x 106 m. Suppose that a 61kg person is hanging vertically on an aluminum (Young's modulus 6.9 x 1010 N/m2) wire. What is the

2. A certain wire of length L, crosssectional area A is extended by an amount ‘e’ by a force F. Given that the young’s modulus of the material of the wire is E, Show that the; a. Energy stored in the wire is given by the expression (5) b. Energy per

A tightrope walker walks across a 30.0 m long wire tied between two poles. The center of the wire is displaced vertically downward by 1.0 m when he is halfway across. If the tension in both halves of the wire at this point is 3675 N, what is the mass of

A tightrope walker walks across a 30.0 m long wire tied between two poles. The center of the wire is displaced vertically downward by 1.0 m when he is halfway across. If the tension in both halves of the wire at this point is 3675 N, what is the mass of

A copper wire of diameter 0.30mm and length 1.50m is joined to another steel wire of same diameter and length 1.20m. The copper part of the double wire is hung vertically to a fixed point, while a small weight is connected to the lower end of the steel

A uniform metal rod, with a mass of 3.7 kg and a length of 1.2 m, is attached to a wall by a hinge at its base? A horizontal wire bolted to the wall 0.51 m above the base of the rod holds the rod at an angle of 25 degrees above the horizontal. The wire is

Metal sphere 1 has a positive charge of 7.00nC . Metal sphere 2, which is twice the diameter of sphere 1, is initially uncharged. The spheres are then connected together by a long, thin metal wire. What are the final charges on each sphere?

The drawing shows two crates that are connected by a steel (Young's modulus 2.0 x 1011 N/m2) wire that passes over a pulley. The unstretched length of the wire is 1.8 m, and its crosssectional area is 1.4 x 105 m2. The pulley is frictionless and


A large rock that weighs 164.0 N is suspended from the lower end of a thin wire that is 3.00 m long. The density of the rock is 3200 kg/m^3. The mass of the wire is small enough that its effect on the tension in the wire can be neglected. The upper end of

A large rock that weighs 164.0 N is suspended from the lower end of a thin wire that is 3.00 m long. The density of the rock is 3200 kg/m3. The mass of the wire is small enough that its effect on the tension in the wire can be neglected. The upper end of

Original Question: Neutral metal sphere A, of mass 0.10kg, hangs from an insulating wire 2.0m long. An identical metal sphere B, with charge q is brought into contact with sphere A. Sphere A goes 12 degrees away from Sphere B. Calculate the initial charge

Original Question: Neutral metal sphere A, of mass 0.10kg, hangs from an insulating wire 2.0m long. An identical metal sphere B, with charge q is brought into contact with sphere A. Sphere A goes 12 degrees away from Sphere B. Calculate the initial charge

You've made the finals of the Science Olympics! As one of your tasks, you're given 1.1g of copper and asked to make a cylindrical wire, using all the metal, with a resistance of 1.7 Ohm. What length l will you choose for your wire? What diameter d will you

A wire of uniform linear mass density hangs from the ceiling. It takes 0.82 s for a wave pulse to travel the length of the wire. How long is the wire?

A steel wire 2.7mm in diameter stretches by 0.211 percent when a mass is suspended from it. How large is the mass in kg?

A mass of 12.7 kg is hanging by a steel wire 1.02 m long and 1.12 mm in diameter. If the mass is pulled down slightly and released, what will be the frequency of the resulting oscillations? Young's modulus for steel is 2.0 1011 N/m2.

A brass wire with Young's modulus of 9.20 1010 Pa is 2.5 m long and has a crosssectional area of 4.6 mm2. If a weight of 5.2 kN is hung from the wire, by how much does it stretch?

A steel wire and a copper wire, each of diameter 2.000 mm, are joined end to end. At 48.0°C, each has an unstretched length of 2.000 m. The wires are connected between two fixed supports 4.000 m apart on a tabletop. The steel wire extends from x =


An acrobat hangs by his hands from the mid dle of a tightly stretched horizontal wire so that the angle between the wire and the hori zontal is 12.5◦. If the acrobat’s mass is 88.8 kg, what is the tension in the wire? The acceleration of gravity

An acrobat hangs by his hands from the mid dle of a tightly stretched horizontal wire so that the angle between the wire and the hori zontal is 12.5◦. If the acrobat’s mass is 88.8 kg, what is the tension in the wire? The acceleration of gravity

An acrobat hangs by his hands from the mid dle of a tightly stretched horizontal wire so that the angle between the wire and the hori zontal is 12.5◦. If the acrobat’s mass is 88.8 kg, what is the tension in the wire? The acceleration of gravity

50.0 kg stoplight hangs from wire over middle of an intersection. wire makes 15 degree angle with horizontal. find tension in each end of the wire

Neutral metal sphere A, of mass 0.10kg, hangs from an insulating wire 2.0m long. An identical metal sphere B, with charge q is brought into contact with sphere A. Sphere A goes 12 degrees away from Sphere B and there is a 90 degree angle at Sphere B

when the metal sphere is suspended at the end of a meal wire its extension is 0.4mm. If another metal sphere of the same material with its radius half as the previous is suspended then extension would be ans: 1)0.05mm

A 46cmlong wire with a mass of 10.5 g is under a tension of 52.0 N. Both ends of the wire are held rigidly while it is plucked. (a) What is the speed of the waves on the wire?

A steel wire is used to lift heavy object. The cable has a diameter of 14.25 mm and an initial length of 33.5 m. If the cable stretches 2.50 mm, what is the mass of the heavy object? Use 20.0 x 10^10 Pa for Young’s modulus for steel. Give your answer in

A steel wire is used to lift heavy object. The cable has a diameter of 14.25 mm and an initial length of 33.5 m. If the cable stretches 2.50 mm, what is the mass of the heavy object? Use 20.0 x 10^10 Pa for Young’s modulus for steel. Give your answer in

A 0.2 kg mass hangs at the end of a wire. what is the tension in the wire if the ball is whirled around in a horizontal circle with tangential velocity of 5 m/sec


An old building is being demolished by swinging a heavy metal ball from a crane. Suppose that such a 85kg ball swings from a 20mlong wire at speed 10m/s as the wire passes the vertical orientation. What tension force must the wire be able to withstand in

A steel wire is used to lift heavy object. The cable has a diameter of 14.25 mm and an initial length of 33.5 m. If the cable stretches 2.50 mm, what is the mass of the heavy object? Use 20.0 x 1010 Pa for Young’s modulus for steel. Give your answer in

You've made the finals of the Science Olympics! As one of your tasks, you're given 1.8g of copper and asked to make a wire, using all the metal, with a resistance of 1.3 Ohm. Copper has a density of 8900 kg/m^3. What length will you choose for your wire(in

. The number of vibrations per second made when a stretched wire is plucked varies directly as the square root of the tension in the wire and inversely as the length. If a 1.23 m long wire will vibrate 325 times each second when the tension is 115 N,

A weight of 40N was attached to the end of a wire during modulus experiment, if the length of the wire is 4m and the diameter is 0.44mm and the extension recorded is 0.30mm. calculate the stress and strain of the wire?. take[Pi=3.142

A 5.9 m wire with a mass of 79 g is attached to the mast of a sailboat. If the wire is given a "thunk" at one end, it takes 0.087 s for the resulting wave to reach the other end. 1. What is the tension in the wire? 2. Calculate the tension for a 89g wire.

You've made the finals of the Science Olympics! As one of your tasks, you're given 1.1 g of copper and asked to make a wire, using all the metal, with a resistance of 2.0 (ohms). Copper has a density of 8900 kg/m^3. What length will you choose for your

Consider two copper wires with the same crosssectional area. Wire A is twice as long as wire B. How do the resistivities and resistances of the two wires compare? CHECK ALL THAT APPLY Wire A and wire B have the same resistance. Wire A has twice the

A 5.9 m wire with a mass of 79 g is attached to the mast of a sailboat. If the wire is given a "thunk" at one end, it takes 0.087 s for the resulting wave to reach the other end. 1. What is the tension in the wire? 2. Calculate the tension for a 89g wire.

why use a 3 wire system instead of a 2 wire system when wiring an electric heater with metal casing So the metal casing can be "grounded" andnot aquire the potential lethal voltage if a 110 V wire inside becomes loose, wet or loses its insulation. If this


A heavy piece of hanging sculpture is suspended by a 90 cm long, 5.0 g steel wire. When the wind blows hard, the wire hums at its fundamental frequency of 80 Hz. What is the mass of the sculpture?  Velocity=(0.9)(80)=72m/s T=V^2*u =(72)^2*(0.005kg/0.9m)

A 5.2 m wire with a mass of 86 g is attached to the mast of a sailboat. If the wire is given a "thunk" at one end, it takes 0.085 s for the resulting wave to reach the other end. Part A What is the tension in the wire? Would the tension found in part A be

2. A certain wire of length L, crosssectional area A is extended by an amount ‘e’by a force F. Given that the young’s modulus of the material of the wire is E, Show that the; a. Energy stored in the wire is given by the expression (5) b. Energy per

A FORCE OF 40N IS Applied at the end of wire 4m long and produced an extention of 0.24mm if the diameter of wire is 2.00mm.calculate stress on wire and strain in the wire

Two wires are anchored at both ends. Wire 1 has a mass of 105 grams and a length of 6.9 m. Wire 2 has a mass of 60 grams, a length of 20 m, and a tension of 143 N. What must be the tension in Wire 1 if its third harmonic is to equal the first overtone of

A copper wire that has a diameter of 2.9 mm carries a current of 39.0 A. Assuming that each copper atom contributes one free electron to the metal, find the drift velocity of the electrons in the wire. The molar mass of copper is 63.5 g/mol and the density

A 3000N force stretches a wire by 2.0mm. A second wire of the same material is twice as long and has twice the diameter. How much force is needed to stretch it by 1.0 mm?

A sample of copper metal containing 7.738*10^24 atoms is drawn into a cylindrical wire with radius r = 0.625 mm . How long must the wire be in meters?

A force of 40N is applied at the end of a wire 4m long and produces an extension of 0.24mm. If the diameter of the wire is 2.00mm calculate the stress on the wire and strain in the wire. With full workings please

A ball of mass 8.0kg is suspended by two wires from a horizontal arm of 0.8m, which is attached to a vertical shaft. If wire 1 is 0.6m and wire 2 is 1.0m, what is the tension of wire 1 if the vertical shaft is in uniform rotation about its axis such that


A sample of aluminum metal containing 9.1080 x 10 to the 25 power atoms is drawn into a cylindrical wire with radius r=0.833 mm. how long must the wire be in meters?

In a modern art exhibit, a multicolors empty industrial wire spool is suspended from two light wires as shown. (Pic) The spool has a mass of 50 kg with an outer diamter of 75 cm and an inner exle diameter of 18 cm. One wire (#1) is attatched tangentially

Two artifacts in a museum display are hung from vertical walls by very light wires. Wire T1 is horizontal from the left wall and goes to a center weight of 177N and wire T2 is at a 53 degree angle with the right wall heading from right to left downwards

Two artifacts in a museum display are hung from vertical walls by very light wires. Wire T1 is horizontal from the left wall and goes to a center weight of 177N and wire T2 is at a 53 degree angle with the right wall heading from right to left downwards

A 48cmlong wire with a mass of 11.0 g is under a tension of 50.5 N. Both ends of the wire are held rigidly while it is plucked. (a) What is the speed of the waves on the wire? (b) What is the fundamental frequency of the standing wave? The answers are

You need to make a 100 microH inductor on a cylinder that is 5.0 cm long and 1.0 cm in diameter. You plan to wrap four layers of wire around the cylinder. What diameter wire should you use if the coils are tightly wound with no space between them? The wire

If a metal wire carries a current of 79 . 0 mA, how long does it take for 7.90 × 10 20 electrons to pass a given crosssectional area anywhere along the wire? The fundamental charge is 1 . 602 × 10 − 19 C. Answer in units of s

Two wires are made of the same material. The first wire dissipates power P with a current of I. If the second wire is 3 times as long and has twice the diameter, what will the current need to be through the second wire to dissipate the same power P as the

A picture of width 43.0 cm, weighing 52.0 N, hangs from a nail by means of flexible wire attached to the sides of the picture frame. The midpoint of the wire passes over the nail, which is 2.50 cm higher than the points where the wire is attached to the

1)A picture of width 40 cm weighing 40N hangs from a nail by means of flexible wire attached to the sides of the picture frame. The midpoint of the wire passes over the nail which is 3 cm higher than the points where the wire is attached to the frame. Find


A picture of width 43.0 cm, weighing 52.0 N, hangs from a nail by means of flexible wire attached to the sides of the picture frame. The midpoint of the wire passes over the nail, which is 2.50 cm higher than the points where the wire is attached to the

A long, straight wire carries a current of 740 mA. A thin metal rod 45 cm long is oriented perpendicular to the wire and moves with a speed of 1.8 m/s in a direction parallel to the wire. What are the size and direction of the emf induced in the rod if the

Two identical 17.7kg balls, each 23.9 cm in diameter, are suspended by two 35.0cm wires as shown in the figure (Figure 1) . The entire apparatus is supported by a single 18.0cm wire, and the surfaces of the balls are perfectly smooth. what is the

The tension on a wire is 2640 N. The wire is 2.6 m long and the fundamental frequency is 330 Hz. What is the mass of the wire? (Answer: 2.33g) Answer is provided above. Please show all work on how to get the answer. Thank you!

A picture of width 43.0 cm, weighing 52.0 N, hangs from a nail by means of flexible wire attached to the sides of the picture frame. The midpoint of the wire passes over the nail, which is 2.50 cm higher than the points where the wire is attached to the

Two artifacts in a museum display are hung from vertical walls by very light wires. Wire T1 is horizontal from the left wall and goes to a center weight of 177N and wire T2 is at a 53 degree angle with the right wall heading from right to left downwards

If a metal wire carries a current of 130 mA, how long does it take for 3.50×10 20 electrons to pass a given crosssectional area anywhere along the wire? The magnitude of the charge on an electron is 1.6 × 10 −19 C. Answer in units of s.

a Coper wire with wire with a diameter of 1.5mm is joined to an alluminium wire, which has a diameter of 2.3mm. The wire carries a current of 1.2A. What is the current density in each wire?

Two cylindrical copper wires have the same mass and are at the same temperature. Wire A is twice as long as wire B. The resistance of wire A is related to that of wire B by : a) RA = RB/4 b) RA = RB/2 c) RA = RB d) RA = 2RB e) RA = 4RB

Two cylindrical copper wires have the same mass and are at the same temperature. Wire A is twice as long as wire B. The resistance of wire A is related to that of wire B by a) RA = RB/4 b) RA = RB/2 c) RA = RB d) RA = 2RB e) RA = 4RB


A 15kg chandelier is suspended from the ceiling by four vertical steel wires. Each wire has an unloaded length of 5 m and a diameter of 6 mm, and each bears an equal load. When the chandelier is hung, how far do the wires stretch? (The Young's modulus for

A 4m long copper wire has a diameter of 2mm and carries a current of 10A. Determine the ff: a. current density in the wire b. electric field c. potential difference between the ends of the wire d. resistance of the wire

A .5 m long, 3 cm diameter metal bar has a Young’s Modulus of 7.0x1010 N/m2. If a 50,000 N force is applied to the end of the bar, by how much will it compress?

Need help, please. A copper wire (density = 8.96 g/cm^3) has a diameter of 0.25 mm. If a sample of this copper wire has a mass of 22 g, how long is the wire? Thank you.

A copper wire (density=8.96 g/cm^3) has a diameter of 0.25 mm. If a sample of this copper wire has a mass of 22 g, how long is the wire?