a fly wheel turns at 480rpm ,compute the angular speed at any point on the wheel and the tangential speed 30.0cm from the centre

60,872 results

  1. trigonometry

    The sprockets and chain of a bicycle are shown in the figure. The pedal sprocket has a radius of 4 in., the wheel sprocket a radius of 2 in., and the wheel a radius of 13 in. The cyclist pedals at 45 rpm. (a) Find the angular speed of the wheel sprocket.

  2. physics

    A small rubber wheel is used to drive a large pottery wheel, and they are mounted so that their circular edges touch. The small wheel has a radius of 1.7 cm and accelerates at the rate of 6.9 rad/s^2, and it is in contact with the pottery wheel (radius

  3. physics

    a fly wheel turns at 480rpm ,compute the angular speed at any point on the wheel and the tangential speed 30.0cm from the centre .

  5. physics

    a remote controlled car's wheel accelerates at 22.4 rad/s^2. if the wheel begins with an angular speed of 10.8 rad/s what is the wheel's angular speed after exactly 3 full turns?

  6. Physics

    A potter’s wheel with rotational inertia of 45 kg m2, is spinning freely at 40 rpm. The potter drops a lump of clay onto the wheel where it sticks a distance 1.2 m from the rotational axis at the wheel’s center. If the subsequent angular speed of the

  7. Physics

    A wheel mounted on a stationary axle starts at rest and is given the following angular acceleration: 9-12t where t is the time after the wheel begins to rotate. Find the number of revolutions that the wheel turns before it stops ( and begins to turn in the

  8. Physics!

    A wheel rotates with a constant angular acceleration of 3.50 rad/s2. The angular speed of the wheel is 2.00 rad/s at t = 0. If the radius of the wheel is doubled, Are the following statements affected? If so, in what way? (Select all that apply.) (1)The

  10. Physics

    A spinning wheel is slowed down by a brake, giving it a constant angular acceleration of −4.60 rad/s2. During a 2.60-s time interval, the wheel rotates through 85.4 rad. What is the angular speed of the wheel at the end of the 2.60-s interval?

  11. Physics

    A particular Ferris wheel (a rigid wheel rotating in a vertical plane about a horizontal axis) at a local carnival has a radius of 20.0 m and it completes 1 revolution in 9.84 seconds. (a) What is the speed (m/s) of a point on the edge of the wheel? Using

  12. Physics

    A flywheel turns at 600 rpm. Compute the angular speed at any point on the wheel and the tangential speed 0.5 m from the centre.

  13. physics

    The balance wheel of a watch oscillates with angular amplitude 1.7π rad and period 0.64 s. Find (a) the maximum angular speed of the wheel, (b) the angular speed of the wheel at displacement 1.7π/2 rad, and (c) the magnitude of the angular acceleration

  15. physics

    a wheelof diameter 0.70 meterolls without slipping. a point at the top of the wheel moves with a tangential speed of 2.0 meter/second. a) at what speed is the axis of the wheel moving? b) What is the angular speed of the wheel?

  16. science

    A flywheel makes 120 rpm. Find the angular speed of any point on the wheel and linear speed of a point is 10 cm from the center of the wheel.

  17. Physics

    A wheel 1.0m in diameter is rotating about a fixed axis with an initial angular velocity of 2rev.s-1.the angular acceleration is 3rev.s-1. (1)compute the angular velocity after 6s. (2)through what angle has the wheel turned in this time interval? (3)what

  18. Physics

    A wheel turns through 90.0 revolutions in 15.0 sec. The angular speed at the end of this 15.0 sec period is 10.0 rev/s. Assuming that the angular acceleration is constant, calculate a) the angular speed at the beginning of the 15.0 sec interval, and b) the

  20. math

    Place one piece of tape on the ground (starting point) and one on the rim of the wheel (the rider). Roll the wheel away from the starting point (see figure below) and stop the wheel in at least 16 different positions, including points at which the rider is

  21. Physics(Please check)

    After 14.6 s, a spinning roulette wheel has slowed down to an angular velocity of 1.22 rad/s. During this time, the wheel has an angular acceleration of -4.51 rad/s2. Determine the angular displacement of the wheel. I did w0= wf + (4.51)(14.6) = 1.22+45.1

  22. physics

    After 10.0 s, a spinning roulette wheel at a casino has slowed down to an angular velocity of +1.56 rad/s. During this time, the wheel has an angular acceleration of -5.45 rad/s2. Determine the angular displacement of the wheel.

  23. physics

    A beetle sits at the top of a bicycle wheel and flies away just before it would be squashed. Assuming that the wheel turns clockwise, the beetle's angular displacement is 3.14 radians, which corresponds to an arc length of 1.2 m. What is the wheel's

  25. math

    a car's wheel turns at 200 rpm. the radius of each wheel is 1.3 ft. to the nearest radian per minute, what is the angular velocity of a point: on the tire thread? on the hubcap .4ft from the center? right at the center?

  26. Physics

    Starting from rest, a wheel undergoes constant angular acceleration for a period of time T. At what time after the start of rotation does the wheel reach an angular speed equal to its average angular speed for this interval?

  27. Physics

    The wheel of Fortune. a contestant gives the wheel an initial angular velocity of -5.95 rad/s and the wheel stops after 5.8s of constant acceleration. Determine the panel (e.g. $600 or bankrupt) that the yellow pointer will be on when the wheel stops.

  28. physics

    A wheel rotates without friction about a stationary horizontal axis at the center of the wheel. A constant tangential force equal to 83.N is applied to the rim of the wheel. The wheel has radius 0.110m . Starting from rest, the wheel has an angular speed

  30. Physics

    At time t=0 a grinding wheel has an angular velocity of 26.0 rad/s. It has a constant angular acceleration of 25.0 rad/s^2 until a circuit breaker trips at time t = 2.50 s. From then on, the wheel turns through an angle of 440 rad as it coasts to a stop at

  31. Physics Angular Momentum

    A bullet with a mass m = 4.83 g and initial speed of 330 m/s passes through a wheel which is initially at rest as in the figure. The wheel is a solid disk with mass M = 2.29 kg and radius R = 18.6 cm The wheel rotates freely about an axis through its

  32. Physics (Rotation)

    In Fig. 10-28, wheel A of radius rA is coupled by belt B to wheel C of radius rC. The angular speed of wheel A is increased from rest at a constant rate α. Find the time needed for wheel C to reach angular speed ω assuming the belt does not slip. (Hint:

  33. Physics

    A bike wheel rotates uniformly through 2 revolutions in 3 seconds. a) what is the period of the wheel's rotation? T=3rev/2s=1.5s b) what is the frequency of the wheel's rotation? (in Hertz) f=1/T =1/1.5 =.666Hz c) what is the angular speed of the

  35. physics

    A conveyer belt is driven by a large (diameter = 1.0 m) wheel. The wheel starts from rest and has an angular acceleration of 0.35 rad/s 2. (a) Through what angle does the wheel turn in 18 s? (b) What is the wheel's angular velocity at that time?

  36. science

    please help...A wheel 1.0m in diameter is rotating about a fixed axis with an initial angular velocity of 2rev.s-1.the angular acceleration is 3rev.s-1. (1)compute the angular velocity after 6s. (2)through what angle has the wheel turned in this time

  37. physics

    If a wheel turns with a costant rotational speed then: each point on its rim moves with constant roational velocity, each point on its rim moves with constant translational acceleration, the wheel turns with constant translation acceleration, the wheel

  38. please check

    If a wheel turns with a costant rotational speed then: each point on its rim moves with constant roational velocity, each point on its rim moves with constant translational acceleration, the wheel turns with constant translation acceleration, the wheel

  40. Physics

    n early method of measuring the speed of light makes use of a rotating slotted wheel. A beam of light passes through one of the slots at the outside edge of the wheel, travels to a distant mirror, and returns to the wheel just in time to pass through the

  41. Physics

    A steel bicycle wheel (without the rubber tire) is rotating freely with an angular speed of 18.00 rad/s. The temperature of the wheel changes from -100.0 to +300.0 degrees Celcius. No net external torque acts on the wheel, and the mass of the spokes is

  42. Physics

    Now your bicycle wheel is rotating with an angular speed of 43.8 rad/s. The wheel has a mass of 4.9 kg and a radius of 48.6 cm. Treat the wheel as a solid thin disc. (a) Calculate the rotational kinetic energy of the wheel in J. (b) Calculate the angular

  43. Physics

    A cord is wrapped around the rim of a wheel .250 m in radius, and a steady pull of 40.0 N is exerted on the cord. The wheel is mounted on frictionless bearings on a horizontal shaft through its center. The moment of inertia of the wheel about this shaft is

  45. math

    The Colossus ferris wheel at Six Flags St. Louis has a diameter of 50.3 m. A rider located on the circumference of the ferris wheel rotates at a speed of 16 km/h. (a) What is the angular speed of the ferris wheel, in rad/sec? (b) How long does it take for

  46. Physics

    A potter’s wheel is spinning with an angular speed of 4.5 rad/s. When the potter stops working, the wheel slows down with an angular acceleration of -0.5 rad/s 2. Calculate the angle, in radians, through which the wheel has turned by the time its angular

  47. physics

    A small rubber wheel is used to drive a large pottery wheel, and they are mounted so that their circular edges touch. The small wheel has a radius of 1.7 cm and accelerates at the rate of 6.9 rad/s^2, and it is in contact with the pottery wheel (radius

  48. Math

    A bicycle wheel is 30 inches in diameter. a. to the nearest revolution, how many times will the wheel turn if the bicycle is ridden for 3 miles. b. suppose the wheel turns at a constant rate of 2.75 revolutions per second. What is the linear speed in miles

  50. Physics

    Wheel A of radius ra = 13.9 cm is coupled by belt B to wheel C of radius rc = 34.3 cm. Wheel A increases its angular speed from rest at time t = 0 s at a uniform rate of 5.7 rad/s2. At what time will wheel C reach a rotational speed of 168.2 rev/min,

  51. physics

    A large grinding wheel in the shape of a solid cylinder of radius 0.330 m is free to rotate on a frictionless, vertical axle. A constant tangential force of 250 N applied to its edge causes the wheel to have an angular acceleration of 1.053 rad/s2. (a)

  52. physics

    A motorcyclist is traveling along a road and accelerates for 4.45 s to pass another cyclist. The angular acceleration of each wheel is +6.35 rad/s2, and, just after passing, the angular velocity of each wheel is +75.6 rad/s, where the plus signs indicate

  53. college physics (inertia)

    As a result of friction, the angular speed of a wheel changes with time according to dθ/dt = ω0 *e^-(σ*t) where ω0 and σ are constants. The angular speed changes from an initial angular speed of 3.08 rad/s to 1.58 rad/s in 3.92 s. a)Determine the

  55. Physics

    A bicycle is turned upside down while its owner repairs a flat tire. A friend spins the other wheel and observes that drops of water fly off tangentially from point A. She measures the heights reached by drops moving vertically (see figure). A drop that

  56. Physics

    An early method of measuring the speed of light makes use of a rotating slotted wheel. A beam of light passes through one of the slots at the outside edge of the wheel, travels to a distant mirror, and returns to the wheel just in time to pass through the

  57. Physics

    A wheel 1.0m in diameter is rotating about a fixed axis with an initial angular velocity of 2rev.s-1.the angular acceleration is 3rev.s-1. (1)compute the angular velocity after 6s. (2)through what angle has the wheel turned in this time interval? (3)what

  58. physics

    A remote-controlled car’s wheel accelerates at 22.7 rad/s. If the wheel begins with an angular speed of 11.0 rad/s, what is the wheel’s angular speed after exactly twenty full turns?

  60. physics

    A remote-controlled car’s wheel accelerates at 22.7 rad/s. If the wheel begins with an angular speed of 11.0 rad/s, what is the wheel’s angular speed after exactly twenty full turns?

  61. physics

    A remote-controlled car’s wheel accelerates at 22.6 rad/s2. If the wheel begins with an angular speed of 10.6 rad/s, what is the wheel’s angular speed after exactly three full turns?

  62. Physics/Chemistry

    A steel bicycle wheel (without the rubber tire) is rotating freely with an angular speed of 18.00 rad/s. The temperature of the wheel changes from -100.0 to +300.0 degrees Celcius. No net external torque acts on the wheel, and the mass of the spokes is

  63. Physics

    A wheel rotates without friction about a stationary horizontal axis at the center of the wheel.A constant tangential force of 75N is applied to the rim of the wheel.The wheel has a radius of 0.13m.The wheel has an angular speed of 14.5rev/s after

  65. Physics

    an automobile tire has a radius of 0.350M, and its center forward with a liner speed of v=13.0m/s. (a) Determine the angular speed of the wheel. (Assume that there is no slipping of the surfaces in contact during the rolling motion.) (b) Relative to the

  66. Physics

    So the question I am doing has multiple parts. I was wondering how I should solve this and what formulas should be used. A grinding wheel of radius (.30cm) and mass 15 kg is spinning at a rate of 20.0 revolutions per second. When the power to the grinder

  67. Physics Mehanics

    In the figure below, wheel A of radius rA = 11 cm is coupled by belt B to wheel C of radius rC = 23 cm. The angular speed of wheel A is increased from rest at a constant rate of 1.6 rad/s2. Find the time needed for wheel C to reach an angular speed of 110

  68. Geometry

    A wheel turns at a rate of 12 turns every 5 seconds. If the wheel travels at a speed of 225 inches per second, what is the wheel's diameter?

  70. physics

    When the string is pulled a distance of 40 cm in 2.50 s, the wheel turns though 5 revolutions. What is the average speed of the string, and what is the average angular velocity of the wheel? What is the radius of the wheel?

  71. Physics

    a bicycle turned upside down whiles owner repairs a flat tire. A friend spins the other wheel, of radius R, and observed that drops of water fly off tangentially. She measures the height reached by drops vertically. A drop that breaks loose from the tire

  72. PHYSICS--SHM

    PLZ HELP. THANKS. The balance wheel of a watch oscillates with an angular amplitude of rad and a period of 0.220 s. a) Find the maximum angular speed of the wheel. (b) Find the angular speed of the wheel when its displacement is /4 rad. (c) Find the

  73. mechanics

    A constant force of 40N is applied tangentally to the rim of a wheel with 20cm radius. The wheel has a moment of inertia 30kg.m2. Find (a)angular acceleration (b)angular speed after 4seconds from rest (c)the number of revolutions made in that 4 seconds

  75. Mechanics

    A constant force of 40newton is applied tangentally to the rim of the wheel with 20cetimetre radius the wheel hs moment of intial 30kg find (a)angular acceleration (b)angular speed after 4second frm rest (c)d number of revolution made in(d)show that d work

  76. Physics (Rotation)

    In the figure, wheel A of radius rA is coupled by belt B to wheel C of radius rC. The angular speed of wheel A is increased from rest at a constant rate α. Find the time needed for wheel C to reach angular speed ω assuming the belt does not slip. (Hint:

  77. physics

    The motor of a fan turns a small wheel of radius rm = 1.60 cm.This wheel turns a belt, which is attached to a wheel of radius rf = 2.90 cmthat is mounted to the axle of the fan blades. Measured from the center of this axle, the tip of the fan blades are at

  78. physics constant angular acceleration

    A wheel with radius 25.2 cm rotates with constant angular acceleration 3.75 rad/s2 (radians per second per second). If at t = 0 s, the angular speed of the wheel is 4.3 rad/s, how long does it take the wheel to complete 4 revolutions?

  80. physics

    When a wheel rotates about a fixed axis, do all points on the wheel have the same angular speed? Yes, assuming the wheel is a rigid body.

  81. Physics

    A wheel of arduous 30 cm is rotating at a rate of 2.0 revolutions every 0.080 s. Through what angle, in radians, does the wheel rotate in 1.0 s? What is the linear speed of a point on the wheel's rim? What is the wheel's frequency of rotation?

  82. physics

    A bicycle is turned upside down while its owner repairs a flat tire. A friend spins the other wheel, of radius 0.363 m, and observes that drops of water fly off tangentially. She measures the height reached by drops moving vertically (Fig. P10.63). A drop

  83. Physics Really Need Help Please

    At time t=0 a grinding wheel has an angular velocity of 26.0 rad/s. It has a constant angular acceleration of 25.0 rad/s^2 until a circuit breaker trips at time t = 2.50 s. From then on, the wheel turns through an angle of 440 rad as it coasts to a stop at

  85. Physics

    A wheel starts from rest and rotates about its axis with constant angular acceleration. After 8.7s have elapsed, it has rotated through an angle of 20 radians. What is the angular acceleration of the wheel? What is the angular velocity when the time t =

  86. Physics

    A wheel starts from rest and rotates about its axis with constant angular acceleration. After 8.7s have elapsed, it has rotated through an angle of 20 radians. What is the angular acceleration of the wheel? What is the angular velocity when the time t =

  87. Physics

    A wheel starts from rest and rotates about its axis with constant angular acceleration. After 8.7 s have elapsed, it has rotated through an angle of 20 radians. I found that the angular velocity at 8.7 s is 4.60 rad/s. What is the angular acceleration of

  88. Physics

    A Ferris wheel with radius 14.0 m is turning about a horizontal axis through its center, as shown in the figure below. The linear speed of a passenger on the rim is constant and equal to 6.60 m/s. What is the magnitude of the passenger's acceleration as

  90. Physics- Elena please help!

    A large grinding wheel in the shape of a solid cylinder of radius 0.450m is free to rotate on a frictionless, vertical axle. A constant tangential force of 180 N applied to its edge causes the wheel to have an angular acceleration of 0.870 rad/s2. (a) What

  91. Physics

    A large grinding wheel in the shape of a solid cylinder of radius 0.330 m is free to rotate on a frictionless, vertical axle. A constant tangential force of 300 N applied to its edge causes the wheel to have an angular acceleration of 1.072 rad/s2. (a)

  92. Physics Angular Motion

    A wheel with a radius of 1.5m rotates at uniform angular speed. If a point on the rim of the wheel has a centripetal acceleration of 1.2 m/s/s whats the points tangential speed?

  93. physics

    A wheel starts from rest and in 10.65 s is rotating with an angular speed of 5.810 π rad/s. (a) Find the magnitude of the constant angular acceleration of the wheel. rad/s^2 (b) Through what angle does the wheel move in 6.085 s? rad

  95. physics

    A wheel has an angular speed of 85 rev/s when it experiences a constant angular acceleration of 100 rev/s2 which causes it to spin FASTER. During this time the wheel completes 26 rev. Determine how long the wheel was experiencing this angular acceleration.

  96. physics

    When a 19.9 kg wheel with an angular speed of 3.10 rad/s is disconnected from a motor, a 0.124 N · m frictional torque slows the wheel to a stop. If the wheel has radius of 0.71 m, how long will it take for the wheel to come to rest after being

  97. Physics. PLEASE HELP!!

    Consider a wheel (solid disk) of radius 0.748 m, mass 16 kg and moment of iner- tia 1/2 MR^2 . The wheel rolls without slipping in a straight line in an uphill direction 27 above the horizontal. The wheel starts at angular speed 20.5882 rad/s but the

  98. Physics

    A point on the rim of a 0.75 m diameter grinding wheel changes speed at a constant rate from 15 m/s to 21 m/s in 6.2 s. What is the average angular acceleration of the wheel in rad/s^2?

  100. Physics

    If a wheel turns around 6.00 complete rotations, what would the angular displacement of that wheel be in radians?

  101. PRE-CALC help please

    A pedal socket has a radius of 4 in and the wheel socket has a radius of 2 in. The wheel has a radius of 13 in. The cyclist pedals at 30rpm Find the angular speed of the socket. Find the speed of the bicycle- (assuming the weel turns the same as the wheel

  102. physic

    Wheel A of radius ra = 6.1 cm is coupled by belt B to wheel C of radius rc = 33.3 cm. Wheel A increases its angular speed from rest at time t = 0 s at a uniform rate of 7.1 rad/s2. At what time will wheel C reach a rotational speed of 119.3 rev/min,

  103. physic

    Wheel A of radius ra = 6.1 cm is coupled by belt B to wheel C of radius rc = 33.3 cm. Wheel A increases its angular speed from rest at time t = 0 s at a uniform rate of 7.1 rad/s2. At what time will wheel C reach a rotational speed of 119.3 rev/min,

  105. Trigonometric Functions

    A person is riding a ferris wheel that turns at a constant speeed. The lowest point of the ferris wheel is at ground level. Another person is standing at the side of the wheel on a platform 4m above the ground. She notes the times that the person on the

  106. physics

    Wheel A of radius ra = 14.6 cm is coupled by belt B to wheel C of radius rc = 30.2 cm. Wheel A increases its angular speed from rest at time t = 0 s at a uniform rate of 5.0 rad/s2. At what time will wheel C reach a rotational speed of 52.9 rev/min,

  107. physics

    A large grinding wheel in the shape of a solid cylinder of radius 0.330 m is free to rotate on a frictionless, vertical axle. A constant tangential force of 270 N applied to its edge causes the wheel to have an angular acceleration of 0.854 rad/s2. (a)

  108. physics

    A large grinding wheel in the shape of a solid cylinder of radius 0.330 m is free to rotate on a frictionless, vertical axle. A constant tangential force of 260 N applied to its edge causes the wheel to have an angular acceleration of 0.795 rad/s2. (a)

  110. physics

    A large grinding wheel in the shape of a solid cylinder of radius 0.330 m is free to rotate on a frictionless, vertical axle. A constant tangential force of 280 N applied to its edge causes the wheel to have an angular acceleration of 0.960 rad/s2. (a)

  111. physics

    A wheel of mass 0.47 kg and radius 49 cm is spinning with an angular velocity of 24 rad/s. You then push your hand against the edge of the wheel, exerting a force F on the wheel as shown in the figure below. If the wheel comes to a stop after traveling 1/4

  112. math function2

    A ferris wheel turns at a constant speed. the lowest point of the wheel is ground level. a person is standing on a platform 4m about ground. The intervals between two successive times are alternatly 6 s and 18 s. Part A) what is the period of rotation?

  113. Physics

    A flywheel with a diameter of 2.45 m is rotating at an angular speed of 74.1 rev/min. (a) What is the angular speed of the flywheel in radians per second? (b) What is the linear speed of a point on the rim of the flywheel? (c) What constant angular

  115. Physics

    A spoked wheel with a radius of 44.0 cm and a mass of 1.90 kg is mounted horizontally on frictionless bearings. JiaJun puts his 0.550-kg guinea pig on the outer edge of the wheel. The guinea pig begins to run along the edge of the wheel with a speed of

  116. Physics

    A rotating wheel requires 8.00 s to rotate 29.0 revolutions. Its angular velocity at the end of the 8.00 s interval is 95.0 rad/s. What is the constant angular acceleration of the wheel? (Do not assume that the wheel starts at rest.)

  117. Theory of machine

    A punching machine carries out of 5 holes per minute each hole of 30 mm diameter in 40 mm thick plate requires 10 Nm of energy/mm2 of the sheared area.The punch has a stroke of 90 mm.Find the power of the motor required if the mean speed of the fly wheel

  118. Physics

    A rotating wheel requires 9.00 s to rotate 29.0 revolutions. Its angular velocity at the end of the 9.00 s interval is 98.0 rad/s. What is the constant angular acceleration of the wheel in radians/second squared? (Do not assume that the wheel starts at

  120. Math

    One popular ride at carnivals is the Roundabout, which works in the following manner. Riders stand on the inside edge of a circle, with their backs against a wall mounted on the edge of the circle. The wheel begins to spin. Once it is spinning fast enough

  121. Physics

    A wheel is rolling ithout slipping at 487 meters per second to the right on a level surface. the diameter of the wheel is 100 centimeters. What is the angular speed of the wheel in revolutions per minute? Please walk me through your steps, don't just

  122. college physics (inertia)

    As a result of friction, the angular speed of a wheel changes with time according to dθ/dt = ω0 *e^-(σ*t) where ω0 and σ are constants. The angular speed changes from an initial angular speed of 3.08 rad/s to 1.58 rad/s in 3.92 s. a)Determine the

  123. college physics (inertia)

    As a result of friction, the angular speed of a wheel changes with time according to dθ/dt = ω0 *e^-(σ*t) where ω0 and σ are constants. The angular speed changes from an initial angular speed of 3.08 rad/s to 1.58 rad/s in 3.92 s. a)Determine the

  125. physics

    After 10.0 s, a spinning roulette wheel at a casino has slowed down to an angular velocity of +1.74 rad/s. During this time, the wheel has an angular acceleration of -5.1 rad/s2. Determine the angular displacement of the wheel.

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20