a few drops of NaOH are added to a sample of the unknown. A blue precipitate appears. Next, approximately 1mL of ammonia, NH3, is added. The precipitate dissolves, but the solution remains blue. Which ion is present. Explain

30,487 results
  1. Chemistry

    A 29.00 mL sample of an unknown H3PO4 solution is titrated with a 0.100 M NaOH solution. The equivalence point is reached when 24.63 mL of NaOH solution is added? What is the concentration of the unknown H3PO4 solution? The neutralization reaction is

  2. Chemistry

    A mixture contains only NaCl and Al2(SO4)3. A 1.45-g sample of the mixture is dissolved in water and an excess of NaOH is added, producing a precipitate of Al(OH)3. The precipitate is filtered, dried, and weighed. The mass of the precipitate is 0.107 g.

  3. acid-base titrations

    For each of the following circumstances, indicate whether the calculated molarity of NaOH would be lower, higher or unaffected. Explain your answer in each case. a.the inside of the pipet used to transfer the standard HCI solution was wet with water. b.You

  4. Chemistry

    A student is given a sample in lab which contains one of the ions listed below. After adding a few drops ofsolution to part of the unknown sample, the student got a greyish precipitate. After adding a few drops ofsolution to another part of the unknown

  5. chemistry

    qualitative organic analysis lab 1. Why is it important to have clean test tubes before running a test? Before which tests should acetone not be used to clean the test tubes? 2. Why run solubility tests before running the functional group classification

  6. chemistry

    A 27.00 mL sample of an unknown H3PO4 solution is titrated with a 0.110 M NaOH solution. The equivalence point is reached when 25.78 mL of NaOH solution is added. What is the concentration of the unknown H3PO4 solution? The neutralization reaction is:

  7. Chemistry

    A student was given a solid containing a mixture of nitrate salts. The sample completely dissolved in water, and upon addition of dilute HCl, no precipitate formed. The pH was lowered to about 1 and H2S was bubbled through the solution. No precipitate

  8. chemistry

    Aluminum can be determined gravimetrically by precipitating as Al(OH)3 and isolating as Al2O3. A sample containing approximately 0.1 g of Al is dissolved in 200 mL of H2O and 5 g of NH4Cl and a few drops of methyl red indicator is added (methyl red is red

  9. Chemistry

    If you had added 50 mL of distilled water to one the vinegar sample instead of 30 mL, would the titration have required more NaOH, less NaOH or the same amount of NaOH? Why?

  10. chemistry

    No precipitate formed when an aqueous solution of NaCl or Na2SO4 was added to the sample solution. A precipitate formed when the sample solution was made basic with NaOH. Which ion(s) are present in the sample soluiton? [Hg2]2+ [Ba]2+ [Mn]2+ I know that

  11. chem

    suppose you had an unknown solution that contained either dissolved NaOH, NaCl< or NaNO3. you add 4 drops of AgNO3 solution to 4drops of the unknown solution and observed that no solid formed. What can be concluded the unknown solution? why?

  12. Org. Chem.

    what is the precipitate formed when HCl is added? I believe the answer is NaCl, but I am not sure and this precipitate only formed in the first NaOH extract, as precipitate was essentially nonexistent in the 2nd extract? Below is what was done in the

  13. Chemistry

    An unknown solid acid is either citric acid or tartaric acid. To determine which acid you have, you titrate a sample of the solid with NaOH. The appropriate reactions are as follows: Citric acid: H3C6H5O7 (aq) + 3NaOH (aq) -> 3H2O (l) + Na3C6H5O7 (aq)

  14. ap chemistry

    A mixture contains only NaCl and Fe(NO3)3. A .456 gram sample of the mixture is dissolved in water and an excess of NaOH is added, producing a precipitate of Fe(OH)3. The precipitate is dried and filtered, and its mass is determined to be .107 g. The mass

  15. chemistry

    i am calculating an unknown acid for both monoprotic and diprotic assumptions. I calculated the monoprotic by multiplying the M NaOH by the liters of NaOH used to titrate. 0.0984M x 0.02396= 0.00236. I then take the unknown sample weight and divide it by

  16. Chemistry

    What effect on the molar mass of the unknown acid would each of the following have-that is-would it make the calculated molar mass high, low, or would it have no effect? 1. Adding 5 drops of phenolphthalein instead of 1 drop. 2. Using a standard NaOH

  17. Chem 2

    5 drops of 0.10M NaOH were added to 20mL of the buffer problem, the pHwent from 3.40 to 3.43. Write a net ionic equiation to explain why the pH did not go up to about 10, as it would have if that amount of NaOH were added to distilled water or to 20mL

  18. Chemistry

    A 0.2800 g sample of an unknown acid requires 28.22 ml of 0.1199 M NaOH for neutralization to a phenolphthalein end point. a.) How many moles of OH- are used? b.) How many moles of H+ are found in the acid? c.) What is the calculated equivalent molar mass

  19. Chemistry

    A few drops of AgNO3 is added to a sample of the unknown. A white precipitate appears. Which ion is present?

  20. chemisty

    A mixture contains only NaCl and Al2(SO4)3. A 1.76-g sample of the mixture is dissolved in water, and an excess of NaOH is added, producing a precipitate of Al(OH)3. The precipitate is filtered, dried, and weighed. The mass of the precipitate is 0.126 g.

  21. Chemistry

    IN my experiment, I was doing a qualitative analysis of Group I and II anions using a flowchart. IN the chart I added 5 drops of 0.1M AgNO3 and several drops of 3M HNO3 to 5 drops of solution and found that a precipitate was formed. Thus it was classified

  22. Chemistry

    A mixture contains only NaCl and Fe(NO3). A 0.456g sample of the mixture is dissolved in water, and an excess of NaOH is added, producing a precipitate of Fe(OH)3. The precipitate is filtered, dried and weighed. Its mass is 0.107g. Calculate the following:

  23. Chemistry

    For my lab, I have been asked to calculate the pKa of an unknown amino acid. We titrated the unknown amino acid with NaOH. The pKa needs to be calculated using the Henderson Hasselbach Equation. Obviously you can just get the pH from any point on the graph

  24. ap chemistry

    please explain titration problems. I'm a total noob at this and am trying to answer some prelab questions. Examples: 1. How many mL of a 0.800 M NaOH solution is needed to just neutralize 40 mL of a 0.600 M HCl solution? 2. You wish to determine the

  25. Chem--- last lab question!!

    My lab partner performed one section of a lab on her own while I worked on something else. This section involved first adding a drop of 6 M NaOH to Zn(NO3)2. A precipitate forms. This is repeated in three separate test tubes. In each test tube, a different

  26. Chem

    A 20.00−mL sample of an unknown HClO 4 solution requires titration with 22.92mL of 0.2200M NaOH to reach the equivalence point. What is the concentration of the unknown HClO 4 solution? The neutralization reaction is: HClO 4 (aq)+NaOH(aq)¨H 2

  27. College Chemistry (DrBob222)

    A solution of an unknown weak acid, HA, is titrated with 0.100 M NaOH solution. The equivalence point is achieved when 36.12 mL of NaOH have been added. After the equivalence point is reached, 18.06 mL of 0.100 M HCl are added to the solution and the pH at

  28. Chemistry

    Suppose that 14.9 mL of 0.0512 M NaOH were required to titrate a sample of unknown acid. How many moles of NaOH were used?

  29. Chemistry

    A solution contains the following ions: Hg2(2+) and Fe(2+). When potassium chloride is added to the solution, a precipitate forms. The precipitate is filtered off and potassium sulfate is added to the remaining solution, producing no precipitate. When

  30. chemistry

    a 1.32g sample on unknown containing KHP as a component was titrated with 22.48mL of 0.105 M NaOH to a pheolphthalein end point. what is the weight percent of KHP in the unknown sample?

  31. 11th grade CHEMISTRY TITRATION LAB!

    i have a tritation lab due tomorrow and i am stumped on a couple things. its a titration lab using sodium hydroxide (NaOH)- 250 mL 0.300 M concentration, 10 mL of an unknown substance of vinegar, the avg. of titrated NaOH in the flask with vinegar is 27.7

  32. Chemistry

    Predict whether or not a precipitate will form upon mixing 75.0 mL of a NaOH solution with pOH = 2.58 with 125.0 mL of a 0.018 M MgCl2 solution. Identify the precipitate, if any. Express as a chemical rxn NaOH(aq) + MgCl2(aq) => NaCl(s) + MgOH(aq) I have

  33. percipitate and colour

    a few drops of NaOH are added to a sample of the unknown. A blue precipitate appears. Next, approximately 1mL of ammonia, NH3, is added. The precipitate dissolves, but the solution remains blue. Which ion is present. Explain

  34. Chemistry

    a few drops of NaOH are added to a sample of the unknown. A blue precipitate appears. Next, approximately 1mL of ammonia, NH3, is added. The precipitate dissolves, but the solution remains blue. Which ion is present. Explain

  35. pH???+chem!

    7. A few drops of bromothymol blue indicator are placed into 250 mL of 0.20 mol/L HCl(aq). A sample of 1.8 g of NaOH(s) is then dissolved into this solution. The final colour of the solution is predicted to be How can I do this one? What is the pH of the

  36. Chemistry

    A student is given a sample in lab which contains one of the ions listed below. After adding a few drops ofsolution to part of the unknown sample, the student got a greyish precipitate. After adding a few drops ofsolution to another part of the unknown

  37. Chemistry 102

    A certain municipal water sample contains 46.1 mg SO42-/L and 30.6 mg Cl -/L. How many drops (1 drop = 0.05 mL) of 0.0010 M AgNO3 must be added to 1.00 L of this water to just produce a precipitate? What will this precipitate be? How do i start this

  38. chemisty

    A mixture contains only NaCl and Al2(SO4)3. A 1.76-g sample of the mixture is dissolved in water, and an excess of NaOH is added, producing a precipitate of Al(OH)3. The precipitate is filtered, dried, and weighed. The mass of the precipitate is 0.126 g.

  39. Chemistry Lab

    Are you titrating? Qualitative testing? Just what? If the copper is in solution you can filter the ppt (or let the ppt settle and decant some of the supernatant liquid) and to the filtrate or the decanted liquid add some more NaOH to see if additional ppt

  40. AP Chemistry

    There is an unknown amount of unlabelled monoprotic acid in an unknown amount of water titrated with a sample with a solution of NaOH of unknown molarity. After adding 10.0 mL of NaOH, the pH=5.0. The equivalence point is 32.22 mL of NaOH. What is the Ka?

  41. chemistry

    if the ration of water drops to EDTA is 6.7 for the known sample and 10 for the unknown sample what is the concentration of the unknown sample? (The concentration of the known sample is 315 ppm) a. 150mg/L b. 210mg/L c. 280mg?L d. 320mg/L

  42. Chem

    A sample contains an unknown amount of tartaric acid, H2C4H4O6. If 0.3888 g of the sample requires 37.74 mL of 0.1000 M NaOH to neutralize the H2C4H4O6 completely, what is the percentage of H2C4H4O6 in the sample? The molar mass of H2C4H4O6 is 150.09

  43. organic chemistry laboratory

    hi, im not sure if all my answers are correct especially number 5. could any one check and tell me? please and thank you. 1. Why is it important to have clean test tubes before running a test? Before which tests should acetone not be used to clean the test

  44. chemistry

    Calcium is determined gravimetrically by precipitating it as CaC2O4â‹… H2O, followed by isolating the precipitate as CaCO3. The sample to be analyzed is dissolved in 10 mL of water and 15 mL of 6 M HCl. After dissolution, the resulting solution is

  45. Chem- follow up question

    Sorry i posted this as an answer after my question had been answered, this is continued from the qualitative analysis question: That reallly cleared some things up, but I do still have a few questions. Umm im not completely clear on the hyrogen peroxide

  46. Chemistry

    when a platinum wire dipped into an unknown solution was held over a Bunsen burner flame, an intense purple colour resulted. when 6 drops of 1M AgNO3(aq) in 6MHNO3(aq) was added to this solution, a white-coloured precipitate formed. What is the chemical

  47. General Chemistry

    I add 5 drops Potassium Iodide (KI) to 5 drops lead nitrate (PbNO3). The solution is centrifuged and the aqueous layer is discarded. I then add 5 drops of nitric acid (HNO3), 5 drops of hydrogen peroxide and 10 drops of dichloroethane (C2H4Cl2) to the

  48. chemistry

    Could someone help me with this please? In chemistry, we did a lab in which he put brands of commerical vinegar in a microplate. We put in 10 drops of each vinegar in each plate thinger then we added 1 drop of phenolphthalein and then put in as many drops

  49. Chemistry (AP)

    5 drops of AgNO3 must be added to 1 L of a water sample: 46.1 mg SO42-/L and 30.6 mg Cl -/L. What will be the precipitate that forms? the molarity of AgNO3 is 0.0010 M (mol/L) 1 drop = 0.05 mL

  50. chemistry

    a 3.54 grams solid sample of an unknown monoprotic acid was dissolved in distilled water to produce a 47.0 mL solution at 25 degrees. This solution was then titrated with 0.2 M NaOH. The equivalence point was reached when 35.72 mL of 0.2 M NaOH was

  51. chem-please help!!!!!

    when a 25.0 mL sample of an unknown acid was titrated with a 0.100 M NaOH solution. Determine Ka for the unknown acid. Volume NaOH = 25 mL; pH=8.25

  52. Chemistry

    I am trying to complete a lab called Precipitation Titration of Cobalt Chloride. I've done the experiment and I got that if you combine 18.01mL of 0.1M NaOH with 10mL of CoCl2, the precipitate is forms. Now how do I calculate the concentration of the

  53. Chemistry

    It is possible, although less accurate, to do a standard addition with only one sample. An unknown Fe sample was analyzed by AAS and gave an absorbance reading of 0.160. To the same sample we added 1.5ppm Fe and the new absorbance reading was 0.205.

  54. Chemistry La

    An unknown solution may contain some of the cations listed below. One student preformed a series of experiments to determine what ions are in the solution. Based upon the experiments performed by the students, the results are as follows: a) On addition of

  55. Chemistry

    A solution contains one or more of the following ions: silver, barium, and Copper (II). CY 105 student adds sodium chloride to a small sample of the solution of the unknown and a white precipitate is formed. He/she filters out the precipitate and then add

  56. chem

    5 drops of AgNO3 must be added to 1 L of a water sample: 46.1 mg SO42-/L and 30.6 mg Cl -/L. What will be the precipitate that forms?

  57. Chemistry

    The following Chemical reaction produces a precipitate in an aqueous solution. NaOH(aq)+Mg(Cl)2(aq)NaCl(aq)+Mg(OH)2(s) With an equilibrium constant of K=1.3. If NaOH and Mg(Cl)2 are added in stoiciometric ratio and 1.20 mol of NaOH are present at

  58. Chemistry

    A 50.0 mL sample of 0.12 M formic acid, HCOOH, a weak monoprotic acid, is titrated with 0.12 M NaOH. Calculate the pH at the following points in the titration. Ka of HCOOH = 1.8 multiplied by 10-4. What is the pH when 50.0 mL NaOH is added 60.0 mL NaOH is

  59. Science-PsyDAG

    We did a experiment to recognize chemical change and here it is: I'm listing what we did, step by step. 1. Put on your safety goggles. In one row of your spot plate, add five drops of the sodium hydroxide solution to each of four deprssions. Then add two

  60. Chemistry

    A student was given 100mL of HCL solution in a 250mL beaker and told that the HCL was 0.11M. The student was also given phenolphthalein indicator and 250 ML of 0.1234 M NaOH. The student first filled a buret with NaOH solution. The student then placed an

  61. chem--please help me!!

    when a 25.0 mL sample of an unknown acid was titrated with a 0.100 M NaOH solution. Determine Ka for the unknown acid. Volume NaOH = 12.5 mL; pH=3.80 please help me explain in details!!!

  62. chemistry

    1. 25.0mL of 0.20M Propanic acid (HC3H5O2, Ka = 1.3×10-5) is titrated using 0.10M NaOH. Calculate the following pH. Show your work. a. When 0.0 mL NaOH is added. b. When 25.0 mL NaOH is added c. When 50.0 mL NaOH is added d. When 75.0mL NaOH is added.

  63. organic chemistry laboratory

    hi, im not sure if all my answers are correct especially number 5. could any one check and tell me? please and thank you. 1. Why is it important to have clean test tubes before running a test? Before which tests should acetone not be used to clean the test

  64. organic chemistry

    An unknown H2So4 sample of 25.00mL vl is titrated with 0.149 M NaOH. If 45.22mL of NaOH were needed to reach the pink endpoint, what was the molarity of the unknown acid? Show work using conversion factors????? H2SO+2NaOH --> Na2SO4+2H2O Dont know where or

  65. chemistry

    A sample of neon gas is held in a rigid 2.284L container with a pressure of 1.036 atm at 24.3°C. 4.093g of an unknown cold gas is added to the container. The temperature drops to 20.3°C, but the pressure rises to 1.960atm. What is the molar mass of the

  66. Chemistry

    Since the unkown acid is monoprotic, this also equals the number of moles of acid to use. A typical molar mass for an unknown acid in this experiment is 380 g/mol. Using this molar mass, calculate the mass (in grams) of unknown acid you should use per

  67. Chemistry

    An unknown amount of water is mixed with 350 mL of a 6 M solution of NaOH solution. A 75 mL sample of the resulting solution is titrated to neutrality with 51.2 mL of 6 M HCl. Calculate the concentration of the diluted NaOH solution. Answer in units of M

  68. Chemistry

    An unknown amount of water is mixed with 310 mL of a 6 M solution of NaOH solution. A 75 mL sample of the resulting solution is titrated to neutrality with 58.2 mL of 6 M HCl. Calculate the concentration of the diluted NaOH solution. Answer in units of M

  69. Chemistry

    An unknown amount of water is mixed with 310 mL of a 6 M solution of NaOH solution. A 75 mL sample of the resulting solution is titrated to neutrality with 58.2 mL of 6 M HCl. Calculate the concentration of the diluted NaOH solution. Answer in units of M

  70. math

    a bag full of gum drops. 2/3 of which are blue. the red drops are 3/8 of the number of blue. There are 3 green drops. How many drops in the bag?

  71. Chemistry

    Antacid tab is dissolved in water and a few drops of phenolphthalein is added yielding bright pink solution. 0.2025 M HCl added until pink color disappears. The 0.2147 M NaOH added until it turns light pink for ~30 seconds. mass on antacid tablet = 1.056g

  72. chemistry

    Draw the tritration curve for the neutralization of a 100ml sample of 1M solution of HCl with a .6M solution of Naoh point 1: 2 ml NaOH edded point 2: 40 ml NoOH ADDED POINT 3: EQUIVALENCE POINT 4: 80 ML NaOH added

  73. Chemistry-Experiment

    I did an experiment where I had 5 ml of MgCl2, then 5 ml NH4 solution (NH4OH (aq)) was added and it was observed that a precipitate formed; cloudy solution. After I added 1g of NH4Cl(s), the solution clears up (transparent). 2nd experiment: There was 5ml

  74. Chemistry

    It is possible, although less accurate, to do a standard addition with only one sample. An unknown Fe sample was analyzed by AAS and gave an absorbance reading of 0.160. To the same sample we added 1.5ppm Fe and the new absorbance reading was 0.205.

  75. Chemistry

    when 6 M NaOH is slowly added to a solution containing chromium (III) ion, a precipate forms. However when an excess of 6 M NaOH is added, the precipated dissolves forming a complex ion with a coordination number of four. 1) write the formula of the

  76. Chemistry

    Suppose that a 0.6123-g unknown chloride-containing sample was dissolved, and and AgCl precipitated by adding a AgNO3 solution. The precipitate was filtered, ignited, and found to weigh 0.3324 g. What was the percent chloride in the unknown?

  77. Chemistry --Help 2! :)

    Predict whether Fe(OH)2 will dissolve, precipitate, or do neither after: (a) water is added --> dissolve (b) Fe(OH)2 is added--> neither (c) Solid Fe(NO3)2 is added--> precipitate (d) Solid KNO3 is added---> neither I'm given the answers...but no

  78. Chemistry

    A very old and tired , grey haired AP Chem instructor wanted to determine the Ka of an unlabelled monoprotic acid in his stockroom. He dissolved an unknown amount of acid in an unknown amount of water and proceeded to titrate the sample with a solution of

  79. AP Chemistry

    A very old and tired , grey haired AP Chem instructor wanted to determine the Ka of an unlabelled monoprotic acid in his stockroom. He dissolved an unknown amount of acid in an unknown amount of water and proceeded to titrate the sample with a solution of

  80. Chemistry

    A very old and tired , grey haired AP Chem instructor wanted to determine the Ka of an unlabelled monoprotic acid in his stockroom. He dissolved an unknown amount of acid in an unknown amount of water and proceeded to titrate the sample with a solution of

  81. chemistry

    A certain municipal water sample contains 46.1 mg SO42-/L and 30.6 mg Cl -/L. How many drops (1 drop = 0.05 mL) of 0.0010 M AgNO3 must be added to 1.00 L of this water to just produce a precipitate? What will this precipitate be? how do i do this problem?

  82. Chem

    Suppose that 16.07 mL of 0.0512 M NaOH were required to titrate a sample of unknown acid. How many moles of NaOH were used? Assuming that the unknown acid sample in question 1 had a mass of 0.177 g, what is the molar mass of the unknown acid?

  83. chemistry

    5.750 ml of a soil sample was dissolved in water up to the volume of 50 ml. An aliquot of 10 ml of the same was transferred to an Erlenmeyer flask and added 10 ml of KOH 1 mol L-1 and 2. Drops of Calcein and the solution that had a yellow coloration was

  84. Chemistry

    Determine the moles of ammonia in the following cobalt ammine complex: A sample of .1500 g of the cobalt ammine complex is places in a flask and 25.00mL of .200M HCL is added. a few drops of bromocresol green is added and the titration with .100M to NaOH

  85. Chem

    If .00840 mol is the answer to this question (Suppose that 16.41 mL of 0.0512 M NaOH were required to titrate a sample of unknown acid. How many moles of NaOH were used? ) how would I answer this: Assuming that the unknown acid sample in question 1 had a

  86. Organic Lab Analysis

    1. Before which of the functional group tests discussed in this lab should acetone not be used to clean the test tube (Baeyer's Test, Ceric ammonium nitrate, 2,4-dinitrophenylhydrazine, Tollen's test, Litmus test). 2. Qualitative functional group tests,

  87. chemistry help

    a 3.54 grams solid sample of an unknown monoprotic acid was dissolved in distilled water to produce a 47.0 mL solution at 25 degrees. This solution was then titrated with 0.2 M NaOH. The equivalence point was reached when 35.72 mL of 0.2 M NaOH was

  88. chemistry

    You weigh a sample of a monoprotic unknown acid and dissolve it in 50.00 mL of distilled water. Exactly half of this solution is titrated with Sodium Hydroxide to the phenolphthalein end point. The pH of the other half of the original solution is measured

  89. chemisry

    A technician needs to determine the concentration of lead ions in a sample of water a) Suggest a test chemical that can be added to the water sample to preciitate the lead ions. Show a chemical euation for the formation of the precipitate b) after a

  90. chemistry

    You weigh a sample of a monoprotic unknown acid and dissolve it in 50.00 mL of distilled water. Exactly half of this solution is titrated with Sodium Hydroxide to the phenolphthalein end point. The pH of the other half of the original solution is measured

  91. College Chemistry

    You weigh a sample of a monoprotic unknown acid and dissolve it in 50.00 mL of distilled water. Exactly half of this solution is titrated with Sodium Hydroxide to the phenolphthalein end point. The pH of the other half of the original solution is measured

  92. Chemistry -help

    To determine the sodium carbonate content & total alkali in NaOH, the following steps were performed:- 1) 2.0g of NaOH was dissolved in 80ml of CO2 free water. 2) 3 drops of phenolphthalein indicator were added and the solution was titrated with 1M HCl.

  93. Chemistry

    A 0.2800 g sample of an unknown acid requires 28.22 mL of 0.1199 M NaOH for neutralization to a phenolphthalein point. a.) How many moles of OH- are used? b.) How many moles of H+ are found in the acid? c.) What is the calculated equivalent molar mass of

  94. Chemistry

    With an equilibrium constant of k=1.3 if NaOH and MgCL2 are added in stoichiometric ratio and 1.2 mol of NaOH are present at equilibrium, how much precipitate is produced (in moles)?

  95. chemistry

    A 2.3g sample of MgX is reacted with NaOH. The Mg(OH)2 precipitate had a mass of 1.8g. What is the % of Mg in the original sample?

  96. Chemistry

    My teacher has us doing a virtual Titration lab on sciencegeek site but never demonstrated a Titration Lab so I really don't undestand it. We have to identify five unknown acids according to how much [H+} of acid is in each solution. We had the choice of

  97. Chemistry

    Suppose that 16.41 mL of 0.0512 M NaOH were required to titrate a sample of unknown acid. How many moles of NaOH were used?

  98. General Chemistry

    A 15.0 ml sample of unknown HCL04 solution requires titration with 25.3 ml of 1.200 M NaOH to reach equivalence point. what is the unknown concentration?

  99. chemistry

    Please I need help...I have been trying so hard to finad this answer... Suggest a test chemical that can be added to the water sample to precipitate the lead(II) ions. please show a chemical eqaution for the formation of the precipitate. Thank u so much:)

  100. science

    an unknown molarity of HCl acts as an analyte.50mL of it is placed into a conical flask ans a 0.1M of solution of NaOH was used as a reagent. The endpoint is pH=7, with a pKa of 6.5 chosen.The colour of the solution changed when 10mL of 0.1012M NaOH WAS

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20