# a density of 1.0 M solution of NaCL

29,843 results, page 84-
## Organic

Which layer is likely to be on the bottom in each case? a. Sodium chloride layer or a layer containing a high-density organic compound dissolved in methylene chloride (d 1.4 g/mL) b. Sodium chloride layer or a layer containing a low-density organic -
## chemistry

Saturated solutions of each of the following compounds are made at 20 degree Celsius. Which of the solutions will form a precipitate upon heating? a. NaCl b. Na2SO4 c. Li2CO3 d. sucrose Since water heats at 100 degree Celsius here are there solubility -
## chemistry

Standard Addition Question: Serum containing Na+ gave a signal of 4.27 mV in an atomic emission analysis. Then 5.00 mL of 2.08 M NaCl were added to 95.0 mL of serum. This spiked serum gave a signal of 7.98 mV. Find the original concentration of Na+ in the -
## chemisty

If 15 grams of copper (11) chloride react with 20 grams of sodium nitrate, how much sodium chloride can be formed? Hint: you will need two stochiometry problems to determine which reactants limit the amount of NaCl produced? How do you figure out the 2 -
## chemistry

1. If a gaseous sample contains 73% N2 by volume, what is the solubility of N2 in water at 25°C and 1.0 atm (kH in H2O at 25°C = 7.0 10-4 mol/Latm)? 2. Calculate the vapor pressure of a solution of 0.60 mol of cholesterol in 4.5 mol of toluene at 32°C. -
## math

Ok, so when you are solving an equation, and you have an answer such as 5x=0 , does that mean that it is no solution or all real #s? And, when the answer is 4=4 , does that mean it is no solution or all real #s? And when the answer is 2x=2x, does that mean -
## chem

a solution is prepared with 3.26g kcl and water to make 25.0ml,of kcl,what is the %(m/V) of the kcl solution. -
## Chemistry

I need 1 or 2 examples of a liquid-liquid solution, which can be separated by distillation..and then an example of a solid-liquid solution..the more creative the better.. -
## Chemistry

A 200 mg/dl solution was diluted 1:10. This diluted solution was then additionally diluted 1:5. What us the concentration of the final dilution? -
## Math - Alg

How much pure acid must be added to a 30% acid solution to make a 60L solution which is 50% acid? -
## math

How much pure acid should be mixed with 3 gallons of a 50% acid solution in order to get an 80% acid solution? The %'s always throw me off. -
## algebra

What quantity of pure acid must be added to 600 mL of a 45% acid solution to produce a 50% acid solution? -
## Math - Alg

How much pure acid must be added to a 30% acid solution to make a 60L solution which is 50% acid? -
## chemistry

Using the equipment below, explain how to prepare a .00052 HCL solution farom a regent bottle containing .13 HCL using only the equipment below. Note, you may make multiple solutions but you are not allowed to combine columes. for example, if you need 2 -
## Chemistry

Titration was used to determine the molarity of acetic acid in vinegar. A primary standard solution of KHP was used to standardize the NaOH. 1. When performing this experiment, impure KHP was used to standardize the NaOH solution. If the impurity is -
## chemistry

The Fe(ox)33– complex ion creates an emerald green solution when dissolved. The observed solution color of the complex indicates the size of o is: A. large. B. small. C. in between. D. inconclusive, more information is needed. The observed solution -
## Reposting Chemistry Question -Emergency !!

Saturated solution of Ca(OH)2 in 0.05349 mol/L NaOH. Temperature: 22.1 * C Volume of Ca(OH)2/NaOH aliquot: 25ml Concentration of Standard HCl: 0.1213M Indicator Used: Bromothymol Blue Ksp from previous part I got 3.55x10^-5 - Average volume of HCl added to -
## Chemistry

If 12.50 grams of Pb(NO3)2 are reacted with 3.18 grams Nacl in a "typical double displacement" reaction, please calculate the following: a) What is the limiting reagent? b) what is the reagent in excess? c) Calculate the mass of the excess. d) Calculate -
## Chemistry

1. A chemist prepares a solution by dissolving 4.603 g of NaNO3 in enough water to make 200 mL of solution. What molar concentration of sodium nitrate should appear on the label? Answer in units of M 2.If the chemist mistakenly makes 225 mL of solution -
## CHEMISTY

A 25.0 mL sample of perchloric acid solution required 45.3 mL of 0.101 sodium hydroxide solution for complete neutralization. what was the concentration of the perchloric acide solution? work: 0.0453 L NaOH x ( .101 mol NaOH/ 1L NaOH) x (1 mol HClO4/ 1 mol -
## chemistry

The mass of solute per 100 mL of solution is abbreviated as (m/v). Mass is not technically the same thing as weight, but the abbreviation (w/v) is also common. How many grams of sucrose are needed to make 655 mL of a 36.0% (w/v) sucrose solution? -
## grade 12 chemistry

Q. a 50g sample of Al(NO3)3 is dissolved in water to prepare 1500ml of solution. What is the concentration, in mol/L, of NO3 ions in the solution? -The answer is 0.47 mol/L but I don't know how to solve it. -
## CHEMISTRY

If a solution is made by dissolving 15g of each solid in the same 100g of water at 70 degrees and the solution is cooled to 20 degrees, crystals are observed.. Which solid crystallises and explain in reference to both solids -
## Chemistry

a solution of arsenic oxide containing 0.24g required 50cm^3 of acidified potassium manganate of solution of concentration 0.02M for complete oxidation. What is the oxidation state of arsenic in the product? -
## chemistry

A 4.14 m solution of the solute methylene chloride dissolved in the solvent ethanol is available. Calculate the mass ( kg ) of the solution that must be taken to obtain 1487 g of methylene chloride. CH2Cl2-1327 (kg/m^3) C2H5OH-789.3 (kg/m^3) -
## chemistry

A student wishes to prepare 1.000 g of silver chromate. How many mL of .05000M silver nitrate solution should be added to 50.00 mL of .0700M potassium chromate solution assuming 100% yield -
## ap chemistry

A solution is prepared in which a trace or small amount of Fe+2 is added to a much larger amount of solution in which the [OH]- is 1.0M*10^-2. some Fe(OH)2 precipitates. the value of Ksp for the salt is 8.0*10^-10. assuming that the hydroxide ion -
## Chemistry

The ΔH per mole of CaCl2 is -81.0 kJ. Calculate the final temperature of an aqueous solution if 30 g of CaCl2 are added to 100 g of water at 23oC. Assume that the specific heat of the solution is the same as that of water -
## chemistry

what volume (in L) of 0.150 M KCl solution is required to completely react with 0.150 L of a 0.175 M Pb(NO3)2 solution according to the following balanced chemical equation? 2KCl (aq) + Pb(NO3)2 (aq) --> PbCl2 (s) + 2 KNO3 (aq) -
## chemistry

8.58g of coastic soada was dissolved to produce a solution of 500cm3 .to neutralize 50cm3 of this solution 15cm3 of 0.4M HCl was consumed .(coastic soada = Na2CO3.XH2O ) find the value of X? -
## chemistry

g)How many grams of agarose are needed to make 100 ml of 2.5% agarose solution?. h) Calculate the volume of buffer to which 500mL of 40 mM potassium chloride solution must be diluted to make a new concentration of 0.001M. -
## Chemistry

I have water pH 7.0 insulation with various other things that do not affect pH, I am trying to add X amount of HCL to lower the solution to a pH of 1.5 I know pH=-log[HCl] but I'm not sure how to approach this problem, after this I am then trying to add -
## Chemistry

A solution is prepared that has [NH3]=1.00M and [Cl-]=0.100M. How many grams of AgNO3 can be dissolved in 1.00L of this solution without a precipitate of AgCl(s) forming? Ksp of AgCl = 1.8x10^-10 Kf of [(Ag(NH3)2)+] = 1.6x10^-7 -
## Chemistry

Suppose we are dealing with calcium chloride as opposed to the chemical in the video. If a solution contains 70 g of calcium chloride per 100 g of water at 25 degrees Celsius, is the solution unsaturated, saturated, or supersaturated? -
## Chemistry

When ammonium chloride is dissolved in water, the solution becomes colder. What can you say about the relative magnitudes of the lattice energy of ammonium chloride and its heat of hydration? Why does the solution form? What drives the process? -
## physics

A laser beam passes from air into a 25% glucose solution at an incident angle of 37 ∘ . In what direction does light travel in the glucose solution? Assume the index of refraction of air is n = 1. -
## ap chem

A certain volume of a .50 M solution contains 4.5g of a certain salt. What mass of the salt is present in the same volume of a 2.5 M solution? Indicate the concentration of each ion/molecule: A mixture of 50.0 mL of .2M KClO3 and 25.0 mL of a .20M Na2SO4. -
## Utlwanang Barolong secondary school

physical science it is found that 40 ml of a 0.5mol.dm^-3 sodium hydroxide solution is needed to neutralise 20mol of the vinegar. calculate the pH of the sodium hydroxide solution -
## pre-calc help

Solve the given equation. (Enter your answers as a comma-separated list. Let k be any integer. Round terms to three decimal places where appropriate. If there is no solution, enter NO SOLUTION.) 5 sin^2(x)- 21 sin(x)+ 4 =0 -
## Chemistry

2MnO4-(aq) +5 H2O2 (aq) + 6H+(aq) -> 5 O2(g) + 2 (Mn2+(aq) = 8H2O (l) If a 25.00 ml sample of hydro peroxide required 25.25 ml of .353 M KMNo4 solution to react with all the hydrogen perozide what was the molarity of the hydrogen peroxide solution? -
## Chemistry

A 15.5 mL sample of 0.215 M KOH solution requires 21.2 mL of acetic acid in a titration experiment. Calculate the molarity of the acetic acid solution. Please show all steps, I don't understand this. -
## Chemistry

Suppose you are going to add 450 mL of a 0.10 mol/L hydrochloric acid solution to 250 mL of a 0.2 mol/L sodium hydroxide solution. a)Which one is the limiting reactant? b)What is the theoretical yield of sodium chloride? -
## Chemistry

Calculate the pH of a 5.90 10-3 M solution of H2SO4 I have tried doing this as pH=-log[H+] and also by multiplying the Molarity by two because there are two hydrogens and then doing the -log but both ways have gotten me the wrong answer is there something -
## Chemistry

Hello, I have a question about something we learned in chemistry today. We've been going over Ka/Kb table values, and using them to determine if a solution is acidic, basic or neutral. One of the compounds (in aqueous solution) are NH4OCl (aq), which is -
## Chemistry

What is the volume of a solution of 0.5 M NaOH that must be added to adjust the pH from 4 to 9 in 20 mL of a 100 mM solution of phosphoric acid? Its been about 4 years since I've done this stuff. All I know is the pKa of phosphoric acid is 2.15 and I'm -
## Chemistry

An aqueous solution contains 0.216 M ascorbic acid (H2C6H6O6) and 0.131 M hydrochloric acid. Calculate the ascorbate (C6H6O62-) ion concentration in this solution. [C6H6O62-] =______________ mol/L. -
## Chemistry

Suppose we are dealing with calcium chloride as opposed to the chemical in the video. If a solution contains 70 g of calcium chloride per 100 g of water at 25 degrees Celsius, is the solution unsaturated, saturated, or supersaturated? -
## Chemistry

What is the volume of a solution of 0.5 M NaOH that must be added to adjust the pH from 4 to 9 in 20 mL of a 100 mM solution of phosphoric acid? Its been about 4 years since I've done this stuff. All I know is the pKa of phosphoric acid is 2.15 and I'm -
## Biochemistry

HELP!! Describe how to prepare 800 ml of a 0.100 M potassium acetate buffer, pH = 4.46 (n.b. pKacetic acid = 4.76). You have glacial acetic acid (17.6 M), a 1.000 M solution of KOH and a 1.000 M solution of HCl. -
## Chemistry

A few questions I don't really get and need to see the work for A 50.0 mL sample of 0.55 M benzoic acid, C6H5COOH, a weak monoprotic acid, is titrated with 0.51 M NaOH. Calculate the pH at the equivalence point. Ka of C6H5COOH = 6.5 multiplied by 10-5. -
## chemistry

he Fe(ox)33– complex ion creates an emerald green solution when dissolved. The observed solution color of the complex indicates the size of o is: A. large. B. small. C. in between. D. inconclusive, more information is needed. The observed solution -
## Chemistry

80.0 grams of KBr is mixed with sufficient water to prepare 1865 mL of solution. This solution is then mixed with 46.3 mL of 0.425 M KCl solution. 12 mL of this mixture is subsequently added to 61.0 mL of distilled water. Calculate the molarity of K+ ions -
## Chemistry

The boiling point of a solution increases directly as a function of the number of moles of solute present in a given mass of solution. This relationship is expressed mathematically by the following equation. ΔTb = Kb·m ΔTb is the boiling-point elevation -
## Math

1. Calculate the amount of fluorescein (MW 332.31) you will need to make 10 mL of 15 mM solution in ethanol (EtOH). My answer:0.05 g 2.Using Equation C1V1=C2V2 calculate the volume of stock solution (15 mM) you need to make 1 mL of each working solution -
## Algebra

Checking a few answers to some algebra problems: 1.Find the slope of the line that passes through the points (-4,1) and (3,5). I got m = 5-1 / 3-(4) Answer is m = 4/7 2.Find the equation, in slope-intercept form, of the line that passes through the points -
## chemistry

Precipitation of Ni2+ from a 25 mL aliquot of a solution of unknown concentration yielded 0.338 g of Ni(DMGH)2. Calculate the concentration of the Ni2+ solution -
## Chemistry

How many moles of HNO3 are required to make 250mL of a 2.4M solution? How many grams of KOH are required to make 125mL of a .50M solution? -
## Geometry

ABCD is a parallelogram with angle B= 120, angle C= 60, angle D= 2x+5y, and angle A= 4x+y. Find the values of x and y. Check your solution, only an algebraic solution will be accepted. -
## chemistry

Benzoic Acid (HC6H5OO, 122.0 g/mol) has a Ka = 6.3 x 10-5. What is the pH of a solution that has 3.050 g of benzoic acid in enough water to make a 0.250 L solution? -
## chemistry

a lab experiment calls for 10% acetic acid solution. The lab has only 5% and 15% acetic solutions available. How much of each should be mixed to obtain 10 liters of a 10% solution? -
## APC Chemistry

Suppose you have a solution containing both an iron (II) salt and an iron (III) salt. How would you proceed to identify both Fe2+ and Fe3+ in this solution? -
## ap chemistry

A buffer solution is made by dissolving 0.45 moles of a weak acid (HA) and 0.23 moles of KOH into 680 mL of solution. What is the pH of this buffer? Ka = 2.4×10−6 for HA. -
## chemistry

A titration of 15.75mL HCL of an unknown molarity requires 20.35mL of 0.0903M NaOH solution. What is the molarity of the HCl solution? -
## chemistry

What is the molarity of each kind of ion in a solution of magnesium chloride that contains 86.0 g of magnesium chloride dissolved in enough water to make 2.37 L of solution? M Mg2+ M Cl- -
## chemistry

A saturated solution of ammonium sulfate, (NH4)2SO4, in water at 30 0C contains 78.0 g (NH4)2SO4 per 100.0 g H2O. What is the molality of this solution? -
## chemistry please

if i had a beaker with .0001M of Cu solution and copper solid (anode) and another beaker with 1M Cu solution and Cu solid (cathode), how would i calculate the half reactions of these two? -
## Algebra

Use substitution to determine whether the ordered pair (–2, –3) is a solution of the equation x2 – y = 7. Show some work. Be sure to state your conclusion about whether the ordered pair is a solution or not. -
## chem

What volume of a 2.5 M stock solution of acetic acid (HC¿HÀO¿) is required to prepare 100.0 milliliters of a 0.50 M acetic acid solution? -
## chemistry please

if i want to find the molarity of a solution that is: 5mL of a 3.521 x 10^-5 M solution, and filled to the 50mL line with ethanol, would this be: (3.521 x 10^-5)(.04L ethanol)? -
## Chemistry

A solution of HCL whose pH=2.010 was added to neautralize a 40.00 ml solution of KOH, the molarity of KOH is .2567 M. How many mls of HCl were required? -
## chemistry

What volume of a 2.5 M stock solution of acetic acid (HC2H3O2) is required to prepare 100.0 milliliters of a 0.50 M acetic acid solution? -
## AP Bio (but its a question about chemistry)

no idea how to do this... describe how you would prepare from the specified stock solution: 400 mL of 0.45 M urea starting with a 6 M urea stock solution -
## Chemistry

Suppose you have to prepare 1.00 L of the solution ( KH2PO4 and Na2HPO4 pH=7.31) and that this solution must be isotonic with blood (have the same osmotic pressure as blood). What mass of KH2PO4 would you use? -
## Algebra

Use substitution to determine whether the ordered pair (– 3, – 2) is a solution of the equation 5x + y2 = –11. Show some work. Be sure to state your conclusion about whether the ordered pair is a solution or not. -
## Chemistry

A saturated solution of NH4Cl was made using 500g of water at 90 degrees. the solution was cooled to 50 degrees. what mass of NH4Cl was crystallized -
## science

will silver nitrate solution mixed with calcium sulfate solution produce white precipitation? Will it be because formation of silver sulfate? -
## Gen chem 1

According to the following reaction, what volume of 0.25 M CaCl2 solution is required to react exactly with 50.0 mL of 0.20 M Pb(NO3)2 solution? CaCl2(aq) + Pb(NO3) (aq)- PbCl2(s) + 2 KNO3(aq). -
## Chemistry

A jar contains 75mL of a .45M silver nitrate solution. Will 200g of solid copper be enough to bring all the silver out of solution as a solid? -
## chemistry

A 0.27 sample of a weak acid with an unknown was combined with 12.0 of 3.00 and the resulting solution was diluted to 1.500 . The measured of the solution was 3.95. What is the of the weak acid? -
## math(am i right)

determine whether (-5,1) is a solution of 9x-9y= -3 I said no am i correct? solve by elimination mehtod. 2x+3y=4, 4x+6y=8 type as ordered pair, type N for no solution, I for many. I chose I am I correct? -
## Chemistry

calculate the % dissociation of a 0.750M acetic acid solution and 0.50 M sodium acetate solution. I got the % for acetic acid to be 0.48% but cant finish the question. -
## CHEMISTRY !!! HELP !

A solution containing 0.0158 M maleic acid and 0.0226 M disodium maleate. The Ka values for maleic acid are 1.20 × 10-2 (Ka1) and 5.37 × 10-7 (Ka2). What is the pH of the solution ? -
## Math

A chemist needs to mix an 18% acid solution with a 45% acid solution to obtain a 12 liter mixture consisting of 36% acid. How many liters of each acid solutions must be used? -
## Chemistry

A solution containing 0.0158 M maleic acid and 0.0226 M disodium maleate. The Ka values for maleic acid are 1.20 × 10-2 (Ka1) and 5.37 × 10-7 (Ka2). What is the pH of the solution ? -
## chemistry

A buffer solution is made by dissolving 0.45 moles of a weak acid (HA) and 0.13 moles of KOH into 760 mL of solution. What is the pH of this buffer? Ka = 3.3 × 10−6 for HA. -
## Chemistry

A solution of a weak acid (.025M, 200ml) is mixed with a solution of NaOH ( 0.015M, 150ml). The equilibrium pH is 5.51. What is the Ka of the weak acid? -
## chemistry

What volume of a 2.5 M stock solution of acetic acid (HC2H3O2) is required to prepare 100.0 milliliters of a 0.50 M acetic acid solution? -
## Chemistry

The solubility of a substance is 12.0 g per 100.0 g of water at 60 C. How many grams of the substance can crystallize from a saturated solution that contains 200.0 g of water at 60 C if the solution is cooled to 20 C? -
## chemistry

calculate the number of milliliters of 0.10 M cupric sulfate solution that must be diluted to prepare 10mL of a 0.015M cupric sulfate solution. -
## Chemistry

You wish to prepare 0.18 M HNO3 from a stock solution of nitric acid that is 18.9 M. How many milliliters of the stock solution do you require to make up 1.00 L of 0.18 M HNO3? Answer and..... HOW DO I DO IT? -
## chemistry

Based on your titration of the 150ppm standard solution of Ca2+ calculate the molarity of the EDTA solution we used, which is Ca2+ + EDTA4- ----> [CA(EDTA)]2- -
## Algebra 2

What are the real and complex solutions of the polynomial equation? 27x^3 + 125 = 0 I already got the real solution x = -5/3, I just need to figure out how to find the complex solution. Any help? -
## AP Chemistry

A solution of AgI contains 1.2 mol/L Ag+. Ksp of AgI is 8.3×10^17. What is the maximum I− concentration that can exist in this solution? Answer in units of mol/L -
## Chemistry

How would a student make 500.0 mL of a 0.08500 M solution of iron(III) using a stock solution that is 0.3180 M in iron(III)? Explain how this would be done. -
## Chemistry

The mole fraction of zinc chloride, ZnCl2, in an aqueous solution is 5.73×10-2 . The percent by mass of zinc chloride in the solution is___%. -
## chemistry

26.5 moles of a .2 M aqueous solution of NaOH is required to titrate 50 ml of an aqueous solution of HNO3, what is the concentration of HNO3. I don't want the answer, I want to know how to do it. -
## algebra

If a system has an infinite number of solutions, use set-builder notation to write the solution set. If a system has no solution, state this. m - 2n = 16, 4m + 4 = 1 -
## Molarity

A 44.8−mL sample of a 7.0M KNO3 solution is diluted to 1.10L What volume of the diluted solution contains 16.0g of KNO3? Would I do the same thing for this one or would does it have an extra step it it. -
## Chemistry

Consider the titration of 10.00 mL of a 0.250 M aqueous solution of ethylenediamine (H2NCH2CH2NH2) with 0.250 M HCl(aq). pKb1 = 4.07 and pKb2 = 7.15. What is the pH of the solution after 7.50 mL of HCl are added? -
## chemistry

26.5 moles of a .2 M aqueous solution of NaOH is required to titrate 50 ml of an aqueous solution of HNO3, what is the concentration of HNO3. I don't want the answer, I want to know how to do it.