# a density of 1.0 M solution of NaCL

29,952 results, page 60-
## matter

What are the three properties of matter and how is matter measured? volume, weight, and mass the solid has a mass of 180g. what is the density of the solid What would the density be of a solid, if I had a mass of 180g? -
## chemistry

Would the following procedural errors result in an incorrectly high or low calculated percent NaOCl in commercial bleach solution? A student failed to allow the volumetric pipet to drain completely when transferring the diluted bleaching solution to the -
## chemistry

Would the following procedural errors result in an incorrectly high or low calculated percent NaOCl in commercial bleach solution? A student failed to allow the volumetric pipet to drain completely when transferring the diluted bleaching solution to the -
## chemistry

1)The element nickel has ccp packing with a face-centered cubic unit cell. The density of nickel is 8900 kg/m3 and the cell volume is 4.376 x 10-23 cm3. Calculate the value of Avogadro's number to three significant figures based on these data. (Note: the -
## Pharmacy Technician

RX: Chlorpheniramine 100 ml Lidocaine 2 oz Banana flavoring 1 tsp Take 7ml BID Refrigerator medication at 40°F. 1. What is the final volume in ml? 2. Convert: 40°F = ______ °C=4 3. How many 1oz bottles will this solution fill? 4. How many days will this -
## chemistry

200cm^3 of 1.0 mol dm^-3 sulphuric acid,H2SO4 is poured into a 250 cm^3 volumetric flask.Distilled water is then added to make 250 cm^3 of solution. (a)What is the molarity of the diluted acid solution? (b)What is the volume of 1.6 mol dm^-3 sodium -
## Chemistry

One commercial method used to peel potatoes is to soak them in a solution of NaOH for a short time, remove them from the NaOH, and spray off the peel. The concentration of NaOH is normally in the range of 3 to 6 M. The NaOH is analyzed periodically. In one -
## Chemistry

The spectrophometer was used to measure the absorbance of each of a series of [FeSa]+ solutions. A standard curve was construnceted by plotting the absorbance vs. concentration (M). The slope and y-intercept were found to be 1496 M-1 and .003, -
## Solar Energy please help

Greeting All, please assist with the below. Thanks. The spectral power density of a solar simulator is given by: P(Î»)=7.5âˆ—1015Î»âˆ’2.25âˆ—109 [Wm^-2m^-1] for 300nm<Î»<500nm P(Î»)=2.25âˆ—109âˆ’1.5âˆ—1015Î» -
## Chemistry

(Paper Chromatography) 1. What carrier solution might work well to separate newspaper inks? Why? 2. What carrier solution might work to separate different salts? Why? 3. What carrier solution might work to separate different fatty acids? Why? I really have -
## chemistry

A galvanic cell with e o cell = 0.30 v can be constructed using an iron electrode in a 1.0 m fe(no3)2 solution, and either a tin electrode in a 1.0 m sn(no3)2 solution, or a chromium electrode in a 1.0 m cr(no3)3 solution even though sn2+/sn and cr3+/cr -
## statistics and probability

A shipment of 20 computers contains 4 defective machines.Two computers are selected at random without replacement and tested for being detective. (a). is this a binomial experiment? why or why not solution. Yes. because each trial can result in just two -
## chemistry

Need help with my pH calculations? 1) 0.10 mol of solid sodium hydrogen carbonate and 0.20 mol of solid sodium carbonate are dissolved in the same beaker of water, transferred to a volumetric ﬂask and made to 250.0 mL. The Ka for HCO3 – is 4.7 x -
## Chemistry

Please help! I'm trying to find the solubility of Ca(OH)2 in .001305 mol/L aqueous NaOH? Saturated solution of Ca(OH)2 in 0.01305 mol/L NaOH. [HCl] = 0.1213 M Volume of HCl = 9.81 mL Volume of Ca(OH)2/NaOH aliquot = 25ml Find: 1. the TOTAL [OH-] in the -
## chem

a 45.8mL sample of a 5.8 M KNO3 solution is diluted to 1.00L. What volume of the diluted solution contains 15.0g KNO3? how do you do this? moles of solution: 5.8*.0458 moles Grams of solute= moles*molmassKNO3 Volume of 15g= 1000ml*15/gramssoluteabove -
## Math

1. Which number is the resolution of m + 90 = 150? a. 50 b. 60 (my answer) c. 140 d. 240 2. Which number is the solution of n/3 = -12? a. -36 b. -4 (my answer) c. 4 d 36 3. Use mental math to find the solution of 19b = 190. a. 10 b. 11 c. 171 (my answer) -
## College Chemistry Lab

The absorbance of a 6.3x10^-5M solution of an iron complex was measured to be 0.328 at the optimum wavelength. A second solution of the iron complex has an absorbance of 0.833 measured under identical conditions. What is the molarity of the complex in the -
## Chemistry

In the qualitative analysis scheme, magnesium and nickel precipitate from solution upon the addition of sodium hydroxide. Once separated from the remaining cations by filtration or decanting, the solid mixture is acidified and warmed to dissolve magnesium -
## Chemistry

I have a lab for chemistry that I have to turn in soon, and I have no idea what the major and minor species if any of each of the substances we tested. Can someone please help me answer which one is the major/minor species of each of the elements? They -
## Chemistry

I have a lab for chemistry that I have to turn in soon, and I have no idea what the major and minor species if any of each of the substances we tested. Can someone please help me answer which one is the major/minor species of each of the elements? They -
## Algebra

Solve using the elimination method.Show work.If the system has no solution or an infinite number of solution state ths...-5x+4y=-16,-15x+2y=-58 -
## Chem 121

A solution is made by dissolving 0.35 mole of LiI in enough water to give a final volume of 260.0 mL. What is the molarity of the solution? -
## Chemistry

85ml of 0.1M h2so4 solution is titrated against 0.1N koh solution . Calculate the concentration of salt formed when the acid is one fourth neutralized. -
## chemistry

Potassium bromide has a solubility of 80g/100ml of H20 at 50º C. A saturated solution would be equivalent to a ____________-molar solution? -
## chemistry

Too make a 4% solution of paraformaldehyde from a 20 % solution. C1V1=C2V2 (20)(10ml)= (4)(x) x= 50ml so I would need to add 45ml of PBS and 4ml of the paraformaldhyde. Is that right. -
## science

Compound A is provided as a 500mM solution. If 12.5 mL is taken and added to 12.5mL of water, how many moles (or millimoles / micromoles) are there per 0.1mL of the diluted solution? -
## Chemistry

Write the net ionic equation for the reaction that takes place between a solution of magnesium chloride and a solution of sodium hydroxide. -
## Chemistry

A student has 600.0 mL of a 0.30M solution of HNO3. How much water must she add in order to make it a 0.15 M solution? Be careful how this question is answered. -
## Chem

calculate pH of the buffer solution prepared by mixing 10 mL of 1.5 M HCl with 100 mL of 0.1 M K2CO3 solution. For H2CO3: Ka1= 4.46 e^-7, Ka2= 4.69e^-11 -
## Chemistry

What is the final concentration of a solution if 15-mL of a 2.4-M solution was diluted to 100-mL and this process was repeated two more times? Please help me how to work out the problem. I am not just looking for an answer. I really want to learn. -
## Chemistry

you have75.0ml of 2.5 M Solution of Na2CrO4(aq). You also have 125ml of a 1.74M solution of AgNO3(aq)Calculate the concentration of NO3 when the two solutions are added together -
## Chemistry

What is the concentration, in g/L, of a solution containing 0.65 mol HNO3 in 150 mL solution? Give your answer rounded to nearest whole number, followed by a space and the units. -
## solution making/ chemistry/biotech

how much of a .2M solution can you make with 340 g of calcium carbonate ( MW=100.0869) Do I multiply 340g by 1mole/MW -
## Basic Chemistry

What is the molar concentration of Na+ in a solution prepared by dissolving 100.0g of Na3PO4 in sufficient H20 to form 2.00L of solution?? -
## Chemistry

If each of the salts listed in A through E were dissolved in water to make a 0.1 M solution, which solution would have the lowest pH? a. NaNO2 b. NaF c. AlCl3 d. KNO3 e. Na3PO4 -
## chemistry

How many moles of sodium bicarbonate are contained in 1mL of a saturated solution of NaHCO3 (approximately 1g of solute is dissolved per 9mL solution)? -
## Science

What is the molarity of a solution of sodium hydroxide, NaOH, if 23.64 mL of this solution is needed to neutralize 0.5632 g of potassium hydrogen phthalate (KNaP)? -
## Chemistry

Indicate the concentration of each ion present in the solution formed by mixing the following. Assume that the volumes are additive: 3.60 g of KCl in 76.5 mL of 0.274 M CaCl2 solution [K+] = [Cl-] = -
## Chemistry

a solution is prepared by adding 5g of ammonia,Nh3, and 20g of ammonium chloride, NH4Cl , to enough water to form 2.5 L of solution. What is the ph of the buffer? Kb= 1.8*10^-5 -
## chemistry

Calculate the molarity of a solution that is prepared by dissolving 23.35g of CaCl2 in a sufficient amount of water to make a 600 mL solution. -
## Intermediate Algebra

Solve using the elimination method.Show work.If system has no solution state this or infinite solution 8x+10y=-34 16x-5y=-43 -
## chemistry

Calculate the pH of a solution formed by the addition of 25.00 g of sodium acetate, NaC2H3O2 , to 450 mL of a 0.210 M solution of acetic acid, HC2H3O2 -
## chemistry

If 0.694 grams of pure KHP are needed to exactly neutralize 30.5 mL of a calcium hydroxide solution, what is the concentration (in molarity) of the base solution? -
## chemistry

A 10 ml of hydrochloric acid solution of concentration equal to 0.1 mol per litre is added 90 ml of pure water. What's the pH of the final solution? -
## math

a drug is supplied as a 20 mg/ml solution in a 50 ml vial. you need to make 15 ml of a 10 mg/ml solution. how much concentrate and how much diluent are needed to obtain the desired final volume? -
## Chemistry

A nitric acid solution is found to have a pH of 2.70. Determine [H3O+],[OH-], and the number of moles of HNO3 required to make 5.50L of the solution. -
## Chemistry

a solution made by dissolving 2.733g KH2PO4 and 4.508g K2HPO4 in water to give 250 ml of solution. is the answer... 7.432= ph -
## chemistry

a solution is made by mixing 38.0 ml of ethanol C2H6O, 62.0mL of water. assuming ideal behavior, what is the vapor pressure of the solution at 20 C -
## maths

A solution of acid was found to have a pH of 1.50. What is the hydrogen ion concentration of the solution? (Give your answer in scientific notation to 3 significant figures.) -
## ChemB

CALCULATE PH OF THE SOLUTION THAT RESULTS FROM EACH SOLUTION A) 150.0mL OF 0.25M HF WITH 225.0 mL OF 0.30M NaF Help please, these buffer questions are confusing. -
## chemistry.

2.02g of KNO3 ( Mz=101) is dissolved in sufficient water to prepare 0,500 dm3 of solution. What is the concentration of this solution in mol dm? -
## General Chemistry

Titration between iodine and thiosulphate. Why starch solution has to be added when the solution just turned pale yellow, but not at the beginning of reaction? -
## For Anubhav

re http://www.jiskha.com/display.cgi?id=1368707176 I have a solution, but what a mess. Before I type it all out, let me know if you still need the solution. I certainly don't feel like typing it all out unless you will actually look at it. -
## science

A student is all 32 gram of potassium nitrate in water to prepare 200 ml of solution what is the concentration of solution in terms of mass by volume -
## Chemistry

A current of 10 amps passes for an hour through a solution of sodium chloride with a volume of 1L by poles of pt,calculate the pH of the solution after the electrolysis is finished. -
## chemistry 1046

Solve an equilibrium problem (using an ICE table) to calculate the pH of each solution. a solution that is 0.266 M in CH3NH2 and 0.134 M in CH3NH3Br. Kb = 4.4e-4 -
## chem

Explain the fact that acetic acid can be extracted quantitatively from ether solution by dilute aqueous sodium hydroxide solution. -
## Chemistry

I am having trouble with how to approach this problem. I have the solution but can't figure out how to get it. How many moles of NaOH must be added to 1.0 L of 2.0M HC2H3O2 to produce a solution buffered at each pH? a) pH=pKa b)pH=4 c)ph=5 -
## chemistry

to clean a clogged drain, 26 g of sodium hydroxide is added to water to make 150 ml of solution what are the pH and pOH values for the solution? -
## chemistry

I am having trouble with how to approach this problem. I have the solution but can't figure out how to get it. How many moles of NaOH must be added to 1.0 L of 2.0M HC2H3O2 to produce a solution buffered at each pH? a) pH=pKa b)pH=4 c)ph=5 -
## chemistry

3. Compound A is provided as a 500mM solution. If 12.5 mL is taken and added to 12.5mL of water, how many moles (or millimoles / micromoles) are there per 0.1mL of the diluted solution? -
## Chemistry

use the Hendeson-Hasselbalch equatio. To calculator the pH of a solution at is A) 0.15 M on C5H5N and 0.10M in C5H5NHCl. Kb:1.7x10^-9 B) 15.0 g of HF and 25.0g of NaFin 125 ml of a solution. Ka 3.5x10^-4 -
## chemistry

How many milliliters of a solution of 0.0013 M EDTA4- would be used to titrate the lead in 1000. mL of a 0.0073 M solution of Pb(NO3)2? I'm sry, but I keep getting 5200ml and I know that's just wrong! >< can someone please help me? -
## chemistry

how many ml of 0.655 M phosphoric acid solution is required to neutralize 15 ml of 1.284 M NaOH solution, write a balanced chemical equation -
## science

When 4.56 g of a nonelectrolyte solute is dissolved in water to make 275 mL of solution at 22 °C, the solution exerts an osmotic pressure of 873 torr. -
## Chemistry

25.0 ml of a 0.100 M solution of the weak acid, CH3OOH is titrated with a 0.10 M solution of the strong base, NaOH. Calculate the pH of the equivalence point. -
## Chemistry

A solution that contains 2.047 x 10^-1 M of acid, HA, and 1.808 x 10^-1 M of its conjugate base, A-, has a pH of 4.196. What is the pH after 1.629 x 10^-3 mol NaOH is added to 5.961 x 10^-1 L of this solution? -
## Chemistry

A complex ion, [M(OH)6]4-, is orange in solution. Which of the following ligands, when bound to the same metal might cause the solution to be blue? Cl- CN- CO F- H2O I- NH3 NO2- OH- NCS- -
## CHEM 1411

What volume (in mL) OF 0.0215M HBr solution is be required to titrate 0.235L of a 0.0150M Ca(OH)2 solution? Ca(OH)2+2HBr= CaBr2+2H2O -
## chemistry

Calculate the molarity of a solution that is prepared by dissolving 23.35g of CaCl2 in a sufficient amount of water to make a 600 mL solution -
## chemistry

To clean a clogged drain, 26 g of sodium hydroxide is added to water to make 150 mL of solution. What are the pH and pOH values for the solution? -
## Chemistry

When 1 mol of gaseous hydrogen chloride is dissolved in enough water to make 1 L of solution, approximately how many HCl molecules remain in the solution? -
## science

A laboratory assistant prepared 1 liter of a 40% aqueous sodium Hydroxide solution. how many grams of NaOH were needed to make this solution? -
## Chemistry

You have 500 mL of a 5.0 M solution of nitric acid HNO3 (63.01 g / mol) dissolved in water. How many grams of nitrogen does the solution contain? -
## chemistry

What is the molarity (moles per liter) of an aqueous solution that is prepared by dissolving 5.58g NaOH (MW=40) in enough water to make 250mL of solution? -
## pharm chem-dilution

prepare a 50ml of potassium permanganate solution such that 10ml diluted to 250ml will produce a 1 in 2000 solution -
## chem

The molar mass of hydrogen fluoride, HF, is 20.0 g/mol. If 17.0 grams of HF are dissolved in water to give 200.0 mL of solution, what is the molarity of this solution? -
## pharm chem-dilution

prepare a 50ml of potassium permanganate solution such that 10ml diluted to 250ml will produce a 1 in 2000 solution -
## chemistry

Titration was used to determine the molarity of acetic acid in vinegar. A primary standard solution of KHP was used to standardize the NaOH. 1. When performing this experiment, impure KHP was used to standardize the NaOH solution. If the impurity is -
## Physics

A 10cm times 10cm times 10cm wood block with a density of 700kg/m^{3} floats in water. What is the distance from the top of the block to the water if the water is fresh? weight= density*volume*g weight=700*(10^-3)*9.81 weight=3418.877985 -
## chemistry

You have a 250ml solution of 0.13M calcium iodate. How many grams of potassium iodate need to be added to the solution to begin to precipitate calcium iodate? The solubility product constant for calcium iodate is6.47 *10^-6. B) you have a 250ml solution of -
## AP CHEM FULL ?

This is part of a marathon problem, we have to identify the five compunds of H, N, and O described below. For each compound, I have to write a Lewis structure that is consistent with the information given. a.) All the compunds are electrolytes, although -
## Chemistry

A hot air balloon is filled with hot air and the hot air forces the volume of the balloon to expand until the density of the gas in the balloon is less than the density of the outside air. The volume must be 20% larger than the balloon would be at STP in -
## Chemistry

An example of a solution that exhibits a positive deviation from Raoult’s Law (total pressure is greater than expected) is a solution of acetone (CH3COCH3) and carbon disulfide (CS2). a) Draw Lewis structures for these molecules. Explain the deviation -
## Chemistry AP

Each response gives a pair of solutions. Which pair of solutions should conduct electrical current equally well? 1. 0.10 M NH3 and 0.10 M NH4Cl 2. 0.10 M NaNO3 and 0.10 M HNO2 3. 0.10 M HBr and 0.10 M HF 4. 0.10 M NaCl and 0.10 M NaClO4 Please help... I -
## chemistry

a chloride standard containing 100mmol/L of chloride ion can be prepared by dissolving the following amount of NACL in 1000ml of distilled water. dont know how to prepare a standard but heres my math -
## Chemistry 22

Table salt NaCl and sugar C12H22O11 are accidentally mixed. A 6.00 g sample is burned and 2.90 g of CO2 is produced. What was the mass percentage of the table salt mixture? Could you please show me all the way through if you can? -
## chemistry

Record measured absorbance for each tube in following table. Complete the table by calculating the [ Fe(SCN2+)]eq and [Fe3+]initial and [HSCN]initial Data: Volume of 2.00 x 10-3 M Fe(NO3)3 solution, mL 1)5.00, 2) 5.00, 3) 5.00 4) 5.00 5) 5.00 Volume of -
## chemistry

Record measured absorbance for each tube in following table. Complete the table by calculating the [ Fe(SCN2+)]eq and [Fe3+]initial and [HSCN]initial Data: Volume of 2.00 x 10-3 M Fe(NO3)3 solution, mL 1)5.00, 2) 5.00, 3) 5.00 4) 5.00 5) 5.00 Volume of -
## Chemistry

In a previous experiment, 0.800 g of the green complex iron salt was placed in an Erlenmeyer flask and heated with concentrated sulfuric acid until all oxalate ion was destroyed (CO2, SO2 and H2O are formed). Ferric ion (Fe3+) remained in solution and was -
## chemistry/science

Not sure if i posted this but Need help with my pH calculations? 0.10 mol of solid sodium hydrogen carbonate and 0.20 mol of solid sodium carbonate are dissolved in the same beaker of water, transferred to a volumetric ﬂask and made to 250.0 mL. The -
## chemistry university

A 179 mL solution of a copper complex with a molecular weight of 491.9 g mol-1 was made. The absorbance of the solution at 638 nm wavelength was 0.376 using a 1 cm cuvette. It is known that this copper complex has a molar absorptivity (extinction -
## Chemistry

25.00 mL of a solution of oxalic acid are titrated with 0.2586 m NaOH (aq). The stoichiometric eend point is reached when 43.42 mL of the solution of base is added. What is the molarity of the oxalic acid solution? Oxalic acid reacts with sodium hydroxide -
## Algebra

I'm not quite sure about these problems. I know how to do them, but it seems that I get the wrong answer. Maybe I'm supposed to get 'no solution' but I'm not sure. Could someone please help me with them? 5|6-5x|=15x-35 2|3x-7|=10x-8 1/4|4x+7|=8x+16 Ok for -
## grade 9 science

a student wants to estimate the population size and density of birch trees in a woodlot measuring 100 m by 100 m. On a diagram of the woodlot, she splits the area into a 10 by 10 grid and randomly selects 10 sample quadrants - (0,0), (1,4), (2,6), (3,9), -
## Chemistry

1)A solution prepared by adding 0.400 mol of acetic acid (pKa = 4.74) and 0.400 mol of sodium acetate to 100.0 mL of water. The pH of this buffer solution is initially 4.74. Predict the final pH when 55.0 mL of 1.10 M NaOH is added to solution 2) A -
## math

clearly define variables. set up the equations.How many gallons of a 30% alcohol solution must be mixed with 60 gallons of a 14% solution to obtain a solution that is 20% alcohol? x represents? y represents? equation 1? equation 2? -
## Precalculus

Which of the following is a solution for the equation 1/485tan^2x = 0? a) pi b) pi/2 c) 485pi d) no solution Which of the following is NOT a solution to the equation 4sin^2x = 1 for 0≤x≤2pi? a) 30 degrees b) 210 degrees c) 150 degrees d) 120 -
## Chemistry

Suppose you have 1 l of acid solution. With a pH of 2" , you add 1 l of pure water to it, wat happens to the pH of the solution? Explain! Is it correct if i state: the pH of the acid solution becomes neutral since pure water is neutral?? -
## Chemistry

1000 g of 55%(mass percentage) nitric acid solution is to be diluted to 20%(mass percentage) nitric acid solution. How many liters of water should be added to the starting solution?