# a density of 1.0 M solution of NaCL

29,885 results, page 49-
## Chemistry

A solution containing a mixture of metal cations was treated with dilute HCl and no precipitate formed. Next, H2S was bubbled through the acidic solution. A precipitate formed and was filtered off. Then, the pH was raised to about 8 and H2S was again -
## Calculus

Let the length of a rod be 10 meters and the linear density of the rod ρ(x) be written in the form ρ(x) = ax + b with x = 0 representing the left end of the rod and x = 10 representing the right end of the rod. If the density of the rod is 2kg/m at the -
## Chemistry

A solution of hydrogen peroxide, H2O2 , is titrated with potassium permanganate, KMnO4 , according to the following equation: 5 H2O2 + 2 KMnO4+ 3H2SO4 -> 5O2 + 2 MnSO4 +8H2O + K2SO4 It requires 46.9mL of 0.145 mol/L KMnO4 to titrate 50.0 mL of the -
## Chemistry

A compound D, CH3CHCLCH2CH3 was boiled under reflux for some time with dilute NaOH solution.. Dilute nitric acid was then added to the mixture, followed by dilute silver nitrate solution. A Few drops of concentrated ammonia solution were then added. What -
## math show work please

1-11/x+30/x^2=0 A.the solution set is ? B.The solution set is the set of real numbers or C. the solution set is an empty set -
## Chemistry

Please help me with these! Thanks :) Describe, in detail, how to make 5.5 liters of a 2.5 molar HCl solution from a 10.5 molar HCl stock solution. How many grams of a stock solution that is 85.5 percent H2SO4 by mass would be needed to make 150 grams of a -
## CHEM HELP!!!

I don't get two questions out of my homework and I know the answers to them but just not how the answers were gotten. PLEASE HELP!! 1) A handbook gives the aqueous solubility of carbon monoxide at 0 C and 1 atm CO pressure to be 0.0354 mg CO per mL of -
## chemistry

Consider the following equations. For each, decide whether it represents a chemical reaction or a physical change. a. SnCl4(aq) + 4H2O(l) Sn(OH)4(s) + 4HCl(aq) b. 4K(s) + O2(g) 2K2O(s) c. NaCl(s) Na+(aq) + Cl-(aq) -
## chemistry

Which one of the following is a combustion reaction? A. CH4 + 2 O2 CO2 + 2 H2O B. HBr + NaOH NaBr + H2O C. Xe (aq) + H2O(l) HXe(aq) + OH- (aq) D. NaCl (aq) + AgNO3 (aq) NaNO3 (aq) + AgCl (s) -
## chemistry

This soidum hydroxide solution was then used to determine the amount of acetic acid in vinegar. Three titrations of the sodium hydroxide solution against exactly 5mL of vinegar using phenolphthalein indicator required 22.85Ml, 22.67mL and 22.93mL of the -
## Chemistry

Given a diprotic acid, H2A, with two ionization constants of Ka1 = 3.9× 10–2 and Ka2 = 5.9× 10–8. Calculate the pH and molar concentrations of each protonated form for a: (a)0.135 M solution of H2A pH= [H2A]= [HA]= [A2-]= (b)0.135 M solution of NaHA -
## Mathxxx!!!

1. How many solutions does the equation have? 4x+3=2(2x+9) a.one solution b.no solution c. infinite number of solutions d. impossible to determine 2. How many solutions does the equation have? 4x+19=-9-6x a.one solution b.no solution c. infinite number of -
## Chemistry

A chemist takes a 647 gram sample of this hydrate. She removes all the water possible from the sample and collects it. To this water, she adds 7.6 grams of lead(II) nitrate. Afterwards she wants to precipitate all the lead. She wants to use a solution of -
## chikirshu

Q.1 0.1 mole of which of the reagents listed below[(1)to(6)]could be added to 1 litre of water to make 0.1M solutions of each of the following ions seprately? (a)NH4^+ (b)CH3COO^- (c)Cl^- (1) NH3 (2)NH4Cl (3) CH3COOH (4)CH3COONa (5)HCl (6)NaCl Q.2 Explain -
## math

Solve the system by graphing. Then classify the system.? 6x-y=50 6x+7y=-14 What is the solution of the system? (type an ordered pair. Type N if there is no solution. Type R if the solution is all real numbers) -
## Chemistry

the lead (II) nitrate in 25.49 ml of a 0.1338M solution reacts with all of the aluminum sulfate in 25.00 ml solution. What is the molar concentration of the aluminum sulfate in the original aluminum sulfate solution? -
## Chemistry

You have a stock solution of 5.0 M H2SO4. How many mL of stock solution are required to make 136 mL of 1.6 M H2SO4 solution -
## college algebra

How many gallons of a 30% alcohol solution must be mixed with 60 gallons of a 14% solution to obtain a solution that is 20% alcohol -
## algebra

How many liters of 20% alcohol solution should Maria mix with 50 liters of a 60% alcohol solution to obtain a 30% solution? -
## journal assignment

how many liters of a 10%solution of acid should be added to 20 liters of 60%solution of acid to obtain a 50%solution? -
## math

log4(x-3)=2 4^2=x-3 16=x-3 19=x Does this mean the solution would be x=19 or no solution? How would I check this to know if 19 is a solution. I know I plug it back in. Like so: log4(19-3)=2 4^2=19-3 16=16 Did i check correctly? -
## Math

How many gallons of 15% iodine solution should be mixed with 40% iodine solution to make 100 gallons of a 20% solution? -
## chemistry

A sample containing 0.0500mol of Fe2(SO4)3 is dissolved in enough water to make 1.00L of solution. This solution contains hydrated SO4 2- and Fe(H2O)6 3+ ions. The latter behaves as an acid: Fe(H2O)6 3+ --> Fe(H2O)5OH 2+ + H+ a) Calculate the expected -
## Chemistry

What mass of baking soda (NaHCO3) would be required to neutralize 10.00mL of 12.1M muriatic acid remaining in a empty water bottle? HCl(aq)+NaHCO3(aq)=>NaCl(aq)+CO2(g)+H2O(l) -
## chemistry

About how much should the boiling point of pure water differ from .5m 1m and 1.5m aqueous solutions of NaCl and same molal solutions of CaCl2 Trying to check experimental data from van't hoff factor lab -
## Science Help ASAP

Which chemical equation is balanced to show that mass is conserved during the reaction? A. Na + Cl₂ --> NaCl B. 2H₂ O₂ --> 2H O + O₂ C. CH₄ + O₂ --> CO₂ + 2H₂ O D. AgNO₃ + MgCl₂ --> AgCl +MgNO₃ Please Help!!! -
## Chemistry

A 50.0 mL sample of 0.200 M AgNO3(aq) was allowed to react with an excess of NaCl(aq). The AgCl precipitate from the reaction was carefully dried and weighed. How many grams of precipitate should be obtained? I'm currently stuck and need help asap!! -
## Chemistry

Balance the follow equation using change in oxidation number method. (1) P4 + HNO3 = H3PO4 +NO2 + H2O (2) Na2Cr2O7 + FeCl2 + HCl = CrCl3 + NaCl + FeCl3 + H2O -
## Chemistry

100.0cm3 of 2.0mol dm-3 hydrochloric acid is mixed with 2.5g of magnesium oxide powder. The mixture is stirred until no further change occurs. The resulting solution still contains excess hydrochloric acid. Calculate the volume of 1.5mol dm -3 sodium -
## physics

A volume Vi = 23.1 L of air at temperature T = 21 ¢XC is compressed at constant temperature to a volume Vf = 7.7 L. The relative humidity of the air before compression is R = 56.4 %. Saturated water vapour in air at this temperature has a vapour pressure -
## Chemistry

Calculate the mass in grams of the undiluted bleach that was in the sample of bleach titrated. Given: Density of undiluted bleach unkown is 1.042 g/mL. 14.44 mL of .100 M Na2S2O3. .0537 grams of NaClO. Each sample should conain 1/5 of the original -
## chemistry

A student is performing an experiment to find the density of water. She obtains a 100ml beaker, which weighs 53.257 grams, and she fills it with 60 mL of water. The temperature of the water is 25.5 degrees celsius (room temperature). Again the student -
## Physics

Three identical glasses are filled to the same height with water. The first glass is filled with water only(Wa). The second glass has an object of volume V and density half that of water floating in it (Wb). The third glass has an object of volume V and -
## chemistry

A hot air balloon is filled with hot air and the hot air forces the volume of the balloon to expand until the density of the gas in the balloon is less than the density of the outside air. The volume must be 20% larger than the balloon would be at STP in -
## Chemistry

A hot air balloon is filled with hot air and the hot air forces the volume of the balloon to expand until the density of the gas in the balloon is less than the density of the outside air. The volume must be 20% larger than the balloon would be at STP in -
## Chemistry

Sodium metal dissolves in liquid mercury to form a solution called a sodium amalgam. The densities of Na(s) and Hg(l) are 0.97 g/cm3 and 13.6 g/cm3, respectively. A sodium amalgam is made by dissolving 1.0 cm3 Na(s) in 20.0 cm3 Hg(l). Assume that the final -
## Chmistry

Sodium metal dissolves in liquid mercury to form a solution called a sodium amalgam. The densities of Na(s) and Hg(l) are 0.97 g/cm3 and 13.6 g/cm3, respectively. A sodium amalgam is made by dissolving 1.0 cm3 Na(s) in 20.0 cm3 Hg(l). Assume that the final -
## Chemistry

An aqueous sodium salt (NaCnH2n+1O3) solution has an osmotic pressure of 2.041 atm when 1.068 g of the salt are dissolved in 200. g of water at 25 degrees C. Assuming molality and molarity in such a dilute solution are the same and that the sodium salt is -
## Chemistry I - University Level

Suppose 5.87 g of barium acetate is dissolved in 300. mL of a 71.0 m M aqueous solution of sodium chromate. calculate the final molarity of barium cation in the solution. You can assume the volume of the solution doesn't change when the barium acetate is -
## Chemistry

1. In order to make 250mL of a 0.100 M HNO3 solution from a 15.9 M stock solution, then _____mL if the 15.9 M stock HNO3 solution is needed. M1V2=M2V2, solve for V2. (0.100M * 250mL)/ 15.9M = 1.6mL V2-V1=V 1.6mL-250= -248.4 Did I do this correctly? -
## chemistry

The pH of saturated Sr(OH)2 (aq) is found to be 13.12. A 10.0 mL sample of saturated Sr(OH)2 (aq) is diluted to 250.0 mL in a volumetric flask. A 10.0 mL sample of the diluted Sr(OH)2 (aq) is transferred to a beaker, and some water is added. The resulting -
## Help?? Chemistry?

If it takes 20.0 mL of 1.200 M KOH to neutralize 60.0 mL of a given H3PO4 solution, what is the molarity of this phosphoric acid solution? I've figured out that the neutralization of phosphoric acid by the addition of potassium hydroxide in aqueous -
## chemistry

A 27.00mL sample of an H2SO4 solution of unknown concentration is titrated with a 0.1422M KOH solution. A volume of 40.22mL of KOH was required to reach the equivalence point. What is the concentration of the unknown H2SO4 solution? Any help would be -
## Chemistry

Hydrogen peroxide solution, H2O2(aq), is available with a concentration of 1.667mol/L. When diluted to a concentration of 0.25mol/L, the solution is used as a disinfectant. What volume of water should be added to 100 mL of the concentrated hydrogen -
## Chemistry

How many moles of potassium sulfate would you need to prepare 1200 grams of 5.0% sulfate (m/m) solution? Calculate the volume of solution of 3.6 NH4CI needed to prepare 350.0ml of 1.24 M NH4CI. How many grams of ammonium chloride are in the solution you -
## Great Valley

How many moles of potassium sulfate would you need to prepare 1200 grams of 5.0% sulfate (m/m) solution? Calculate the volume of solution of 3.6 NH4CI needed to prepare 350.0ml of 1.24 M NH4CI. How many grams of ammonium chloride are in the solution you -
## Chemistry

If a precipitation reaction occurs when a solution of one species is added to a solution of the other, enter the formula, including the state, of the soluble product. If there is no reaction, enter the formula and state of all ions in solution, separate by -
## Organic chemistry

Assume that the partion compound is 3. Given 400mL of aqueous solution containg 12 g of compound. How many grams of A could be removed from the solution by a single extraction with 200mL of diethyl ether? Also how many total grams can be removed from the -
## maths

how do i solve this equation? there is another answer other than 0, but i am not sure how to get it. 5x^2 + 7x =0 factor the term: x(5x+7)=0 Either term can be zero. You found the x=0, what value of x makes 5x+7 zero? Factor it to this form: x (5x + 7) = 0 -
## Chemistry

If a precipitation reaction occurs when a solution of one species is added to a solution of the other, enter the formula, including the state, of the soluble product. If there is no reaction, enter the formula and state of all ions in solution, separate by -
## chemistry

In standardizing a potassium hydroxide solution, a student finds that 32.60mL of the base solution is needed to titrate 0.5045 grams of KHP to a phenolphthalein end point. In another titration, 26.63mL of this same base solution is needed to titrate -
## Chemistry

A chemist dissolves 0.095 g of CuSO4 · 5H2O in water and dilutes the solution to the mark in a 500-mL volumetric flask. A 39.7-mL sample of this solution is then transferred to a second 500-mL volumetric flask and diluted. What is the molarity of CuSO4 in -
## chemistry

You extract the iron from a tablet and dilute that to 600.0 ml in a volumetric flask. You transfer 0.600 ml of this solution to a 75.0 ml volumetric flask and dilute this to volume. When you measure the concentration of this solution, you find that it is -
## Biology

Please help. Assume that a cell culture has a density of 10^8 cells/mL. You transfer 20 microliters of this culture onto the microscope slide. A) How many cells do you expect will be in this 20 microliters drop you placed under the microscope? B) You add -
## Biology

Please help. Assume that a cell culture has a density of 10^8 cells/mL. You transfer 20 microliters of this culture onto the microscope slide. A) How many cells do you expect will be in this 20 microliters drop you placed under the microscope? B) You add -
## Biology

Please help. Assume that a cell culture has a density of 10^8 cells/mL. You transfer 20 microliters of this culture onto the microscope slide. A) How many cells do you expect will be in this 20 microliters drop you placed under the microscope? B) You add -
## Biology

Please help. Assume that a cell culture has a density of 10^8 cells/mL. You transfer 20 microliters of this culture onto the microscope slide. A) How many cells do you expect will be in this 20 microliters drop you placed under the microscope? B) You add -
## Chemistry

I have had this question in my homework, and honestly I got stuck in these questions. I managed to convert 5.3g of Na2CO3 into moles, but then I got stuck and do not know what to do next to solve the question. If anyone knows how to work this out, help -
## chemistry

Use a balanced redox equation to answer the following question. 71.7 mL of 1.13 x 10-4 mol L-1 potassium ferricyanide solution is required to react completely with 43.9 mL of ascorbic acid solution (under acidic conditions). What is the concentration of -
## chemistry

A solution of the primary standard potassium hydrogen phthalate, KHC8H4O4, was prepared by dissolving 0.4877 g of potassium hydrogen phthalate in about 50 mL of water. Titration with a KOH solution required 17.65 mL to reach a phenolphthalein end point. -
## chemistry

the following titration data were collected: a 10 mL portion of a unknown monoprotic acid solution was titrated with 1.12340 M NaOH and required 23.95 mL of the base solution for neutralization. calculate the molarity of the acid solution calculate the -
## chemistry

A solution of acetic acid is prepared in water by adding 11.1 g of sodium acetate to a volumetric flask and bringing the volume to 1.0 L with water. The final pH is measured to be 5.25. What are the concentrations of acetate and acetic acid in solution? -
## Chemistry

If a precipitation reaction occurs when a solution of one species is added to a solution of the other, enter the formula, including the state, of the soluble product. If there is no reaction, enter the formula and state of all ions in solution, separate by -
## chemistry

A 0.5215 gram sample of CaCO3 is dissolved in 12M HCl and the resulting solution is diluted to 250.0 mL in a volumetric flask. How many moles of CaCO3 are used? What is the molarity of the Ca2+ in the 250 mL of solution? How many moles of Ca2+ ae in a 25.0 -
## Chemistry

A solution of the primary standard potassium hydrogen phthalate, KHC8H4O4, was prepared by dissolving 0.4877 g of potassium hydrogen phthalate in about 50 mL of water. Titration with a KOH solution required 24.71 mL to reach a phenolphthalein end point. -
## Chemistry

If a precipitation reaction occurs when a solution of one species is added to a solution of the other, enter the formula, including the state, of the soluble product. If there is no reaction, enter the formula and state of all ions in solution, separate by -
## Chemistry...Help please!!!

A solution of acetic acid is prepared in water by adding 11.1 g of sodium acetate to a volumetric flask and bringing the volume to 1.0 L with water. The final pH is measured to be 5.25. What are the concentrations of acetate and acetic acid in solution? -
## chemistry

Hydrochloric acid solution reacts with zinc according to the following equation: 2H3O + Zn -> Zn^2+ + H2 +2H2O 100ml of hydrochloric acid solution Ca=0.5mol/l must be prepared from C=5mol/l hydrochloric solution. 1) Specify the glassware needed for this -
## physics

the region 0 < r < r1 is a charged insulating sphere with uniform charge density _E, the region r1 < r < r2 contains free space, and the region r2 < r < r3 is an insulating spherical shell with uniform charge density ��_E. -
## Chemistry

3.a solution has 64 grams of HI dissolved in 250 L of water. what is its [H+] 4. What is the pH of the solution in question #3? 5. A solution has 189 grams of HNO3 dissolved in 1000 L of water. What is pH? -
## MATH

se a graphing calculator or Excel to find the solution of the system of equations. (If the system is dependent, enter DEPENDENT. If there is no solution, enter NO SOLUTION.) 5x + 3y = 2 3x + 7y = −4 -
## science

during the experiment, the students were asked to prepare a 10% (mass/mass) solution of sugar in water . ramesh dissolved 10g of sugar in 100g of water while sarika prepared it by dissolved 10g of sugar in water 100g of the solution a) Are the two solution -
## Chemistry revision

all these questions I got wrong on my homework today ...I'm trying to find out why and what the correct answers were .. please help How many grams of solute are required to make a 504 mL solution of copper (I) nitrate with a concentration of 1.3317 M? -
## Chemistry

PRECIPITATION BY NaC2H3O2(aq) (a) Add 2 mL of sodium acetate solution to the test tube. (b) If a white precipitate forms at the bottom of the test tube, decant the remaining liquid into another clean test tube and retain the precipitate. (Decanting is the -
## chem

Which has the lowest freezing point?Select one of the options below as your answer: A. pure water B. 0.5 M ionic NaCl C. 0.5 M ionic CaCl2 D. 0.5 M ionic AlCl3 E. 0.5 M molecular C12H22O11 -
## Chemistry

Explain how the formulas for H2O and NaCl provide different information about the composition of these two compounds. What I think: For every 1 atom of oxygen, there are 2 atoms of hydrogen. For every one atom of sodium there is one atom of chlorine. -
## general, organic and biochemistry

when a solution prepared by dissolving 4.00g of an unknown monoprotic acid in 1.00L of water is titrated with 0.600M NaOH, 38.7mL of the NaOH solution is needed to neutralize the acid. What was the molarity of the acid solution? what is the molecular -
## Chemistry

A solution is made by dissolving 0.500 mol of HF in enough water to make 1.00 L of solution. At 21 C, the osmotic pressure of the solution is 1.35 atm. What is the percent ionization of this acid? This is what i did.. is it correct? (1.35 atm) = -
## chemistry

The molar heat of solution of a substance is found to be +35.34 kJ/mol. The addition of 0.20 moles of this substance to 1.5 L water initially at 55. °C results in a temperature decrease. Assume the specific heat of the resulting solution to be equal to -
## chemistry

If you wanted to standardize an approximately 0.1 M solution of hydrochloric acid by titrating 10.00 mL (delivered from a pipet)with approximately 30mL of sodium hydroxide solution (delivered from a buret), what should be the approximate concentration of -
## chemistry

Suppose that 50mL of a solution of sulfuric acid of unknown concentration was titrated with a 0.100M solution of sodium hydroxide. If it took 45.5 mL of titrant to reach the equivalence point, what was the concentration of the unknown solution of sulfuric -
## Calc

The figure (which is not pictured, sorry) shows the slope field for y =.2(9-y^2). Make a sketch of the solution using the initial value y(-4)=-2. Find the function f(x) that this solution curve is approaching as x-->infinity. I need help with finding -
## Chemistry

Can someone please check to see if I am doing this correctly. Thank you :) Q) Calculate the new molarity of a 35mL sample of 0.450 M CaCl2 solution that is diluted with enough water to make 250 mL of solution. A) 0.450 m CaCl2 x 35mL/250mL = 0.063 mL -
## Cell biology

you ask your lab assistant to prepare IL of solution Zeta at a concentration of 1M. He comes up to you with a 0.5M stock solution ans asks for help in calculating how much to use. what do you tell him? I dont think my answer is correct. I got 2000 mL of -
## Chem

A Kilogram was originally defined as the mass of ___________. The kilogram was originally defined as the mass of one litre of pure water at standard atmospheric pressure and at the temperature at which water has its maximum density (3.98 degrees Celsius). -
## chemistry

A 15.00 mL sample of an unknown monoprotic weak acid solution is titrated with 0.35 M NaOH. The initial buret reading is 0.23 mL. The phenolphthalein indicator turns the solution light pink when the buret reads 29.58 mL. A. what volume of 0.35 M NaOH was -
## chem

What does the concentration of the benzoic acid in the original liquid and the extracting liquid relate to after the extraction is completed? Answer a. The density of the original liquid. b. The density of the extracting liquid. c. The solubility of -
## chemistry

the dencity of 3 molal solution of NaOH is 1.110g/mL calculate the molarity of the solution -
## Chemistry

Calculate molarity of KNO3 solution if 69 g of salt are dissolved into 250 mL of solution -
## Chemistry

Why is a NaOH solution disposed differently than a solution composed of Water and Nacl2 -
## Chemistry

What is the molarity of the resulting solution when 300. mL of a 0.400 M solution is diluted to 800. mL? -
## chemistry

what final volume in liters of a 2.5 m solution of sodium nitrate can be made using 25.0g of solution -
## math

solve for x x-3(x-1)=6x-3-8x a) infinite solutions b)no solution c)0 d)-1 (x-3)(x-1)=-2x-3 so I believe from the information given the answer would be b) no solution. Is this correct? -
## Chemistry

In the aqueous solution of H2SO4 its mole fraction is 0.2 then closest value of molality or solution is a)13.9 b)9.8 c)10.2 d)11.2 -
## chemistry

8.00 of are dissolved in water to make 4.00 of solution. What is the concentration of hydronium ions, , in this solution? -
## Chemistry

How many mL of water would you add to 32 mL of 0.62 M ammonium chloride stock solution to make a 0.3 M solution? -
## chemistry

8.00 g of are dissolved in water to make 3.00 l of solution. What is the concentration of hydronium ions, , in this solution? -
## chemistry

An aqueos solution is 65%(v/v) rubbing alcohol.How many millimeters of water are in a 95-mL sample of this solution? -
## MATH214

Solve each of the following systems, if possible. Indicate whether the system has a unique solution, infinitely many solutions or no solution. (a) 3y = x – 10 y = x – 2 (b)x + y = 5 3x + 3y = 15 -
## Chemistry

What is the molarity of a solution containing 20 grams of NaOH in 500 milliliters of solution? a-0.04M b-0.5M c-1M d-2M