# a density of 1.0 M solution of NaCL

29,852 results, page 45
1. ## physics

Rachel is asked to calculate the density of a liquid. She correctly measures the mass of the liquid to be 13.9 grams, but she incorrectly measures the volume of the liquid to be 8 mL. The actual volume of the liquid is 7 mL. If Rachel uses the following
2. ## chemistry

a 205 mg sample of diprotic acid is dissolved in enough water to make 250 ml of solution. The pH of this solution is 2.15. A saturated solution of calcium hyrdoxide (Ksp=1.3*10^-6) is prepared by adding excess calcium hydroxide to water and then removing
3. ## Chemistry

Mercury and bormine react with each other to produce mercury(II)bromide: Hg + Br2 -> HgBr2 a) What mass of HgBr2 can be produced from the reactiion 10g HG and 9g Br2? [the part that really confuses me] What mass of which reagent is left unreacted? b)
4. ## Chemistry

Redox titrations are used to determine the amounts of oxidizing and reducing agents in solution. For example, a solution of hydrogen peroxide,H2O2, can be titrated against a solution of potassium permanganate, KMnO4. The following equation represents the
5. ## chemistry

A 100.0 ml sample of 0.300 M NaOH is mixed with a 100.0 ml sample of 0.300 M HNO3 in a coffee cup calorimeter. Both solutions were initially at 35.0 degrees celcius; the temperature of the resulting solution was recorded at 37.0 degrees celcius. Determine
6. ## chemistry

A stock solution of 0.0100 M KMnO4 is diluted by taking 15.5 mL of it and diluting it to 100.0 mL. From this diluted solution, 5.00 mL is taken out and diluted to 100.0 mL. What is the concentration of the solution obtained in the end
7. ## Algebra

Solution A is 30% acid and solution B is 60% acid. How many gallons of each solution must be used to create a 60 gallon mixute that is 50% acid. I have to set this up as a system of equations, and I thought one system was x + y = 60, but I can't get an
8. ## Biology

What is the sample size in this experiment? How can you tell what the sample size is in this case? A team of researchers observed that the acorn density of the oak forests in New York fluctuates from year to year and that mice populations in the forest
9. ## chemistry

i had a lab that combined 1/2 cup of H2O2 (118.3 ml) and 2 tsp of yeast. is the equation for the reaction 2H2O --> 2H2O + O2 what would the mass be for each product in the reation? Is the density of H2O2 1.4g/ml? Here is some interesting reading on this
10. ## Math

How can you tell whether an equation has One solution,Many Solution , No solution?
11. ## Chemistry

how much 2% solution do I need to convert 20 ml of 5% solution to a 3% solution?
12. ## Differential Equations (Another) Cont.

For the following initial value problem: dy/dt=1/((y+1)(t-2)) a)Find a formula for the solution. b) State the domain of definition of the solution. c) Describe what happens to the solution as it approaches the limit of its domain of definition. Why can't
13. ## programming

– Define a structure called Object which includes three doubles specifying the object’s mass, volume and density. – Create an array of 10 Objects. – Define the function void scanobjectsdata(struct Object objects[], int size) that scans from the

1. Which of the following statements explains why threats are NOT effective for motivating people? A. Threats reduce tension. B. Threats ensure that appropriate actions are not abandoned. C. Threats produce permanent change. D. Threats provoke
15. ## Chemistry

What is the molar heat of reaction? When 0.732 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 119C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC.
16. ## chemistry

what ionic compounds could you form from the following? Sodium Calcium Neon Phosphorus Chlorine i have NaCl, CaCl2, Na3P, and Ca3P2 is that all and can neon be used?
17. ## Chemistry

What is the concentration in each of the following solutions? A) 240 mL of 0.200 M KNO3 is added to 160 mL of water. B) 2.25g of NaCl is dissolved in 250 ml of water.
18. ## Chemistry Concept

Is it physically possible to separate table sallt, sodium chloride, NaCl, from table sugar, sucrose? Explain your reasoning.
19. ## Chemistry

No change of mass was observed when a definite amount of a mixture of KI and NaCl is converted to sulphate salts. What is the percentage composition of the mixture?
20. ## Biology

What is the water potential of a 5.7 L water in which 2.1 moles of NaCl has been dissolved at 30 degrees celcisus? Help please? Can you show work as well? It'll be greatly appreciated. Thanks in advance.
21. ## chemistry

One has a solution Sa of ethanoic acid of concentration Ca=1×10^-2 mol/l and pH=3.4  One mixes a volume Va=60ml of the solution Sa of ethanoic acid with a volume Vb1=20ml of the Sb1 solution of ammonia of concentration Cb1=2×10^-2 mol/l. The pH is 5 One
22. ## chemistry

One has a solution Sa of ethanoic acid of concentration Ca=1×10^-2 mol/l and pH=3.4 One mixes a volume Va=60ml of the solution Sa of ethanoic acid with a volume Vb1=20ml of the Sb1 solution of ammonia of concentration Cb1=2×10^-2 mol/l. The pH is 5 One
23. ## Chemistry

It says prepare a theoretical titration of 25 mL of 0.1037 M formic acid (HCOOH; pKa= 3.75) solution (diluted to 100mL volume with deionized water) by 0.0964 M solution of KOH. It asks to determine the volume of KOH solution needed to reach equivalence
24. ## chemistry

A solution prepared by mixing 16.7 mL of 0.760 M NaCl and 16.7 mL of 0.760 M KI was titrated with 0.380 M AgNO3 in a cell containing a silver indicator electrode and a saturated calomel reference electrode. (a) What is [Ag+] when 16.2 mL of 0.380 M AgNO3
25. ## Chemistry - percipitates

10g of AgI is dissolved in 100cm3 of water and Na2SO4(s) is added to the solution with the ppt.After about 10mins.25cm3 of the solution is taken and added Cl2 and heated.The remains Cl2 is removed and a small amount of KI(s) is added and then the solution
26. ## Chemistry

Hi,can I have your help? I'm just trying to solve a few Dilution Solution problems. I'm stuck on these two,and I wish you could help. Here's one: A 500 mL bottle of concentrated acetic acid is diluted to make a 5.0% solution. Find the volume of diluted
27. ## Physics

A hot-air balloon is accelerating upward under the influence of two forces, its weight and the buoyant force. For simplicity, consider the weight to be only that of the hot air within the balloon, thus ignoring the balloon fabric and the basket. The hot
28. ## Physics

A hot-air balloon is accelerating upward under the influence of two forces, its weight and the buoyant force. For simplicity, consider the weight to be only that of the hot air within the balloon, thus ignoring the balloon fabric and the basket. The hot
29. ## Science

Water and gasoline are both clear liquids at room temperature. Describe one physical property and one chemical property that might be used to distinguish between them. Plz help physical:smell chemical: pH value What about density? The density of water is
30. ## chem

A sample of 7.80L of NH3 (ammonia) gas at 22 degrees and 735mmHg is bubbled into a 0.350L solution of 0.400M HCL(hydrochloric acid). The Kb value for NH3 is 1.8x10-5 Assuming all the NH3 dissolves and that the volume of the solution remains at 0.350L ,
31. ## chem

A sample of 7.80L of NH3 (ammonia) gas at 22 degrees and 735mmHg is bubbled into a 0.350L solution of 0.400M HCL(hydrochloric acid). The Kb value for NH3 is 1.8x10-5 Assuming all the NH3 dissolves and that the volume of the solution remains at 0.350L ,
32. ## chemistry

Calculate the volume ( mL ) of the solute C2H5OH and the mass ( g ) of the solvent diethyl ether that should be mixed to produce 3.46 kg of a solution that is 1.31 m C2H5OH. volume ( mL ) of the C2H5OH mass ( g ) of the (C2H5)2O Molar Mass (g/mol) C2H5OH
33. ## Chemistry

A street merchant is trying to sell you a 14 karat (24 karat is 100% pure) bracelet for \$450. The gold is alloyed with copper. Before buying the item, you weigh it to be 110 grams and you also measure its water displacement as 7.59 mL. What is the %
34. ## biology a

Read the scenario. A cell contains 90% water and 10% salt. The external solution contains 75% water and 25% salt. Which statement is correct? A>> The external solution is hypotonic, so the cell will shrink B>> The external solution is
35. ## chemistry/check my work I have to submit today

When 27.20mL of .5 M H2SO4 is added to 27.20 of 1M KOH in a coffee cup calorimeter at 23.5 degrees C, the temp rises to 30.17 degrees C. Calculate delta H of this reaction. (Assume that the total volume is the sum of the individual volumes and that density
36. ## Biochemistry

BSA stock solution A has a concentration of 3.50 mg/mL. 1.00mL of stock solution A is diluted to a final volume of 5.00mL to prepare solution B. 1.00mL of stock solution B is diluted to a final volume of 5.00mL to prepare solution C. 1.00mL of stock
37. ## Chemistry

1.Calculate the pH of a solution prepared by mixing 20mL of the .07222M aspirin solution with 10mL of .2M NaOH. 2. Calculate the pH for the titration of 40mL of .1M solution of C2H5NH2 with .1M HCl for a)0 mL added and b)20 mL added c)40 mL added d)50mL
38. ## Chemistry

269 mL of a 0.2089 M sodium carbonate (Na2CO3) solution is prepared and labelled solution A. Calculate the mass (in grams) of sodium carbonate (molar mass = 105.99 g mol-1) required to prepare Solution.
39. ## Science

. To make a saturated solution, 36 g of sodium chloride is dissolved in 100 g of water at 293 K. Find the percent concentration at this temperature. 3. A solution of acetone contains 20 ml of acetone in 480 ml of water. Calculate the % concentration of
40. ## chemistry

You have a solution that contains 0.25g grams of oxalic acid dissolved in 100 mL of water. This solution is placed in a separating funnel, and the 100 mL of butanol is added to the solution. calculate the mass of oxalic acid in the organic solvent
41. ## Chemistry

10% (m/m) Sodium Hydroxide solution, NaOH(aq) is used to break down wood fibre to make paper. A) What mass of the solute is needed to make 250mL of 10% (m/m) solution? B) What mass of solvent is needed? C) What is the molar concentration of the solution?
42. ## AP Chem

I had to do an experiment to calculate the enthalpy of solution of Epsom salts. I'm stuck on how to calculate the amount of the reactant in moles. Here's some preliminary data: 37.58 g of Epsom salts in the solution Molar mass of solution: 246.48 g/mol I'm
43. ## chemistry

A student measures the conductivity of a KNO3 solution and determines it to be a strong electrolyte. the student incorrectly lists the species in solution as KNO3,K+, NO3. Give the correct list of species in solution? Please help I am lost
44. ## Chemistry

NaCl [Symbol] Na + Cl2 Type of reaction: synthesis KOH + HNO3 [Symbol] HOH + KNO3 Type of reaction: double replacement Ca + S [Symbol] CaS Type of reaction: synthesis BaBr2 + Cl2 [Symbol] BaCl2 + Br2 Type of reaction: Cs2 + H2O [Symbol] CsOH + H2 Type of
45. ## chemistry

When an aqueous solution suspected of containing Ba2+ or Pb2+ or both are mixed with sulfuric acid a precipitate forms. in another test, when the original solution is mixed with an aqueous solution of sodium sulfide no precipitate forms. What do these two
46. ## chem lab

when an aqueous solution suspected of containing BA2+ or Pb2+ or both is mixed with sulfuric acid a precipitate forms. In another test, when the original solution is mixed with an aqueous solution of sodium sulfide no precipitate forms. What do these two
47. ## Analytical Chemistry

I have a 0.00156 M solution of CuSO4*5H2O in water (from 0.0398 g of CuSO4*5H20 in 100 mL of water). How would I calculate the ppm of Cu of that solution from that information? Now if I were to find ppm of Cu in different aliquots of this stock solution (5
48. ## Chemistry - help please

In an experiment, when 25 mL of 5.5 x 10^-3 M NaOH is mixed with 30 mL of 7.5 x 10^-3 M Fe(Br)2, a hydroxide compound is formed (Ksp = 1.8 x 10^15). Which of the following describes the resulting solution? a. The product is unsaturated b. The mixture
49. ## Chemistry

A solution of I2 was standardized with ascorbic acid. Using a .1000 g sample of pure ascorbic acid, 25.32 mL of I2 were required to reach the starch end point. A. What is the molarity of the iodine solution? B. What is the titer of the iodine solution?
50. ## Chemistry

A solution of I2 was standardized with ascorbic acid. Using a .1000 g sample of pure ascorbic acid, 25.32 mL of I2 were required to reach the starch end point. A. What is the molarity of the iodine solution? B. What is the titer of the iodine solution?
51. ## Chemistry

How does changing the volume of strontium nitrate solution, added to 8 cm3 of sodium carbonate solution, affect the amount of precipitate formed? Is it the more the strontium nitrate solution is increased, the more precipate formed?
52. ## chemistry

what mass of ammonium chloride is dissolved in 100 grams water in each of the following solutions in 1.10 molal NH4Cl solution, in a solution which is 75% water by mass in solution with a mole fraction of 0.15 NH4Cl? please help me solve this problem.
53. ## Chemistry

I do not know how to solve this problem. Could you show me how? You have a stock solution of 5.00M H3PO4. a.) What would be the concentration if 20.0mL of the stock solution is diluted to 250.0mL? b.) What volume of the dilute solution would you need if
54. ## Chem.

Can you also check this one, Please and thank-you! 23. Acetylsalicylic acid, commonly known as ASA, is the most widely used drug in the world. ASA has the chemical formula, C8H7O2COOH, and a Ka of 3.27 X 10 – 4 mol/L. What is the pH of a 10 mol/L ASA
55. ## Chemistry

During a titration experiment, a 150.0 mL solution of 0.05 M sulfuric acid (H2SO4) is neutralized by 300.0 mL solution with an unknown concentration of sodium hydroxide (NaOH). What is the concentration of the sodium hydroxide solution? The answer I got
56. ## chemistry help

A 15.00 mL sample of an unknown monoprotic weak acid solution is titrated with 0.35 M NaOH. The initial buret reading is 0.23 mL. The phenolphthalein indicator turns the solution light pink when the buret reads 29.58 mL. B. How many moles of NaOH were
57. ## Chemistry

A buffer solution is prepared by mixing 50.0 mL of 0.300 M NH3 with 50 mL of 0.300 NH4Cl. The pKb of NH3 is 4.74. NH3 + H2O-> NH4+ +OH- 7.50 mL of 0.125 M HCl is added to the 100 mL of the buffer solution. Calculate the concentration of NH3 and NH4Cl
58. ## math

A pharmacist has an 18% alcohol solution and a 40% alcohol solution. How much of each should he mix together to make 10 liters of a 20% alcohol solution?
59. ## BioChemisty

You have a 0.5 M HEPES pH 7, and a 0.5 M HEPES pH 8 solution. How much of each stock solution do you need to make 125mL of a 50 mM HEPES pH 7.5 solution? How much water?
60. ## Algebra

How do you know if a value is a solution for an inequality? how is this different from determining if a value is a solution to an equation?, write an inequality and provide a value that may or may not be a solution to the inequality
61. ## math

How many gallons of 5% acid solution should be mixed with 20 galllons of a 10% acid solution to obtain an 8% acid solution
62. ## math

How many liters of a 2.5% bleach solution must be mixed with a 10% bleach solution to produce 600 ml of a 5% bleach solution?
63. ## chemistry

hello, I have done a acid & base titration lab, with 0.1M vinegar (with unknown %tage acid) and 0.1 NaOH...I think the result came out ok, in avg, 25.21mL of NaOH have titrated w/ 30.0mL unknown %tage acid of vinegar. all I am given is Density of vinegar=
64. ## chemistry

A student took 100 mL of a solution of Mg(OH)2 and reacted it with HCl (aq) to calculate the concentration of hydroxide ions in the solution. If 13.75 mL of 0.010M HCl was used to react with all of the OH- (aq) in the 100-mL solution, what was the
65. ## Chemistry

A student took 100 mL of a solution of Mg(OH)2 and reacted it with H2SO4 (aq) to calculate the concentration of hydroxide ions in the solution.  If 13.75 mL of 0.010 M H2SO4 was used to react with all of the OH- (aq) in the 100-mL solution, what was the
66. ## Analytical Chem

Describe the preparation of 100 mL 0.50 M solution of Fe(NO3)3 from a stock solutiion that is 60%(w/w)Fe(NO3)3 solution with a specific gravity of 1.110 g/ml. Calculate the molar NO3 concentration in the resulting solution. Molar Mass of Fe(NO3)3: 241.86
67. ## chemistry

I wanted to double check how to go about creating a 1% solution and a 4% solution. I know that it is 1 part to 99 and 4 part to 96. so I add 1ml of solution and then water and the same for the four percent. I wanted to know if you also had any good site to
68. ## Chemistry

If a rate of 80.0 mL of an aqueous solution of potassium hydroxide concentration of 0.25 mol / L are partially neutralized by 20.0 mL of an aqueous solution of nitric acid concentration of 0.50 mol L. Determine pH of the final solution. kOH + HNO3 ->
69. ## pH???+chem!

7. A few drops of bromothymol blue indicator are placed into 250 mL of 0.20 mol/L HCl(aq). A sample of 1.8 g of NaOH(s) is then dissolved into this solution. The final colour of the solution is predicted to be How can I do this one? What is the pH of the
70. ## PHYSICS

A piece of wood is floating at the surface of some water as illustrated (the diagram is not to scale). The wood has a circular cross section and a height h = 4.0 cm. The density of water is 1.00 g/cm3. The distance y from the surface of the water to the
71. ## algebra

1. Tell whether the system has one solution infinitely many solutions or no solution. 6y=-5x+24 2.5x+3y=12 a. one solution b. infinitely many solutions*** c. no solution i know its B but can you solve it step by step for me thank you
72. ## Math

1) Find the solution to the following system of two linear equations, if it has a solution. 2x-y=3, -x+y=1 2Find the solution to the following system of two linear equations, if it has a solution. 2x+y=4, x+3/2y=3
73. ## Chemistry

I have no idea what I'm doing wrong here... Question: A solution is 0.3% by mass calcium chloride. Therefore, 145 g of the solution contains how many grams of calcium chloride? My solution: 145g x (0.3g / 100g) = 0.435g or 0.44g CaCl2 What am I doing
74. ## Chemistry

I have no idea what I'm doing wrong here... Question: A solution is 0.3% by mass calcium chloride. Therefore, 145 g of the solution contains how many grams of calcium chloride? My solution: 145g x (0.3g / 100g) = 0.435g or 0.44g CaCl2 What am I doing
75. ## Chemistry

A 16.6 mL portion of an HBr solution of unknown strength is diluted to exactly 247 mL. If 102.1 mL of this diluted solution requires 87.8 mL of 0.37 M NaOH to achieve complete neutralization, what was the strength of the original HBr solution?
76. ## Chemistry

During a titration experiment, a 150.0 mL solution of 0.05 M sulfuric acid (H2SO4) is neutralized by 300.0 mL solution with an unknown concentration of sodium hydroxide (NaOH). What is the concentration of the sodium hydroxide solution?
77. ## Chemistry

Calculate the osmotic pressure of this solution. 18..6 grams of solute with molecular mass of 8940 grams are dissolved in enough water to make 1.00 dm3 of solution at 25 celsius. What is the osmotic pressure of the solution?
78. ## Chemistry

What volume of 0.200M of aqueous solution of formic acid, a weak monoprotic acid (KA = 1.78x10-4) and 0.200M aqueous solution of NaOH would you mix to prepare a 500mL of a buffer solution of pH = 4.0.
79. ## Chemistry

A solution is prepared by placing 72.8 g of calcium chloride in 120 g of water at 22C. The vapor pressure of water at 22C is 2.6 kPa. a)What is the boiling point of the solution? b)What is the freezing point of the solution?
80. ## Chemistry

You have 1liter buffer solution containing 0.1 M HF and 0.05 M NaF. Now you add 0.055 moles of HCl to it. A) Do you think that the solution still retains it's effectiveness? B) Explain rationally how you came to the conclusion. I do not think that the
81. ## Chemistry

A student dissolves 22.4 g of sodium phosphate to prepare a 2.98 L solution. Another student then dilutes this solution to 4.90 L. If sodium phosphate completely dissociates, determine the number of mols of each ion in the final solution.
82. ## Algerbra

How do you know if a value is a solution for an inequality? How is this different from determining if a value is a solution to an equation? If you replace the equal sign of an equation with an inequality sign, is there ever a time when the same value will
83. ## m116

How do you know if a value is a solution for an inequality?How is this different from determining if a value is a solution to an equation? If you replace the equal sign of an equation with an inequality sign, is there ever a time when the same value will
84. ## math

How do you know if a value is a solution for an inequality? How is this different from determining if a value is a solution to an equation? If you replace the equal sign of an equation with an inequality sign, is there ever a time when the same value will
85. ## math

An apple orchard has an average yield of 36 bushels of apples per tree if tree density is 26 trees per acre. For each unit increase in tree density, the yield decreases by 2 bushels per tree. How many trees per acre should be planted to maximize the yield?
86. ## General Chemistry (Chem101)

A chemist mixes two liquids A and B to form a homogeneous mixture. The densities of the liquids are 2.0514 g/mL for A and 2.6678 g/mL for B. When she drops a small object into the mixture, she finds that the object becomes suspended in the liquid; that is,
87. ## SCIENCE

The size, mass, and arrangement of atoms affect the density of a substance. If a substance has a low density, what can you guess about the size, mass and arrangement of the atoms that make up that substance?
88. ## Chemistry

i. Which of the following solutions has the lowest pH (more acidic). Explain you answers. a. a 0.1 M solution of a strong acid or a 0.1 M solution of a weak acid. b. a 0.1 M solution of an acid with Ka=2×10-3 or one with Ka=8×10-6 c. a 0.1 M solutions of
89. ## Chemistry

i. Which of the following solutions has the lowest pH (more acidic). Explain you answers. a. a 0.1 M solution of a strong acid or a 0.1 M solution of a weak acid. b. a 0.1 M solution of an acid with Ka=2×10-3 or one with Ka=8×10-6 c. a 0.1 M solutions of
90. ## Chemistry

i. Which of the following solutions has the lowest pH (more acidic). Explain you answers. a. a 0.1 M solution of a strong acid or a 0.1 M solution of a weak acid. b. a 0.1 M solution of an acid with Ka=2×10-3 or one with Ka=8×10-6 c. a 0.1 M solutions of
91. ## chemistry help

In the following questions, assume that no excess distilled water was added from a wash bottle during the titration of 10.00 mL of vinegar with your standardized solution of NaOH. A. calculate the pH of vinegar. B. what was the pH of the solution after
92. ## Chemistry

A solution contains the following ions: Hg2(2+) and Fe(2+). When potassium chloride is added to the solution, a precipitate forms. The precipitate is filtered off and potassium sulfate is added to the remaining solution, producing no precipitate. When
93. ## chemistry

In the following questions, assume that no excess distilled water was added from a wash bottle during the titration of 10.00 mL of vinegar with your standardized solution of NaOH. A. calculate the pH of vinegar. B. what was the pH of the solution after
94. ## chem

How would u prepare each of the following solutions 100 mL of a 245 ppm solution of urea, CH4N2O, in water and How would u prepare each of the following solution 100 mL of an aqueous solution whose K+ concentration is 0.084 M Write up the procedure, and I
95. ## chemistry-urgent

Silver nitrate is added to a solution and precipitate forms. This precipitate dissolves when concentrated ammonia is added. What anion was present in the original solution? I don't know how to answer this. Also can someone please explain how to identify a
96. ## Chemistry

A solution contains Cr3+ ion and Mg2+ ion. The addition of 1.00 L of 1.55M NaF solution is required to cause the complete precipitation of these ions as CrF3(s) and MgF2(s). The total mass of the precipitate is 49.9g .Find the mass of Cr3+ in the original
97. ## Chemistry

24.5 ml of water are added to a 1.20 molar solution of nitric acid. If the concentration decreases to 0.55 molar, what volume of the concentrated solution was used? 1.20 M x mL = (24.5 mL + mL) x 0.55 M Solve for mL. Check my thinking. When you finish the
98. ## holy school

H2 S + HNO3 --------> NO + H2 O + S 150 g of hydrogen sulfide are dissolved in 3500 mL of water. a. What is the molarity of the hydrogen sulfide solution? b. How many grams of sulfur can be produced from 50 mL of this solution? c. 22.4 L of nitrogen
99. ## chemistry

How many grams of O_2(g) are needed to react completely with 3.95 g of H_2(g) according to the following balanced chemical equation: 2H_2(g) + O_2(g)--> 2H_2_O(g) Molarity (M) is the number of moles of a solute per 1 L of solution--> M= (mol
100. ## Chemistry

A solution is prepared by dissolving 3.0 × 10-4 mol of AgNO3 and 3.0 × 10-5 mol of K2CrO4 in 1.00 liter of solution. With respect to Ag2CrO4 (Ksp = 1.9 × 10-12), is the resulting solution saturated, supersaturated, or unsaturated? I know you do