# The question is: "A block of ice at 0oC is dropped from a height that causes it to completely melt upon impact. Assume that there is no air resistance and that all the energy goes into melting the ice. Show

54,983 results
1. ## physics

A 2.5 kg block of ice at a temperature of 0.0 degrees Celcius and an initial speed of 5.7 m/s slides across a level floor. If 3.3 x 10^5 J are required to melt 1.0 kg of ice, how much ice melts, assuming that the initial kinetic energy of the ice block is

2. ## physics

an ice skater applies a horizontal force to a 20 kg block on frictionless, level ice causing the block to accelerate uniformly at 1.4 m/s^2 to the right. after the skater stops pushing the block it slides onto a region of ice that is covered with a thin

3. ## physics

Years ago, a block of ice with a mass of about 22kg was used daily in a home icebox. The temperature of the ice was 0.0 degrees Celsius when delivered. As it melted, how much heat did a block of ice that size absorb? The latent heat of fusion of water is

4. ## Physical Science

A 100-g chunk of 72 ∘C iron is dropped into a cavity in a very large block of ice at 0∘C. What is the mass of ice that melts. (The specific heat capacity of iron is 0.11 cal/g⋅∘C.).

5. ## Physics

The question is: "A block of ice at 0oC is dropped from a height that causes it to completely melt upon impact. Assume that there is no air resistance and that all the energy goes into melting the ice. Show that the height necessary for this to occur is at

6. ## Physics

A 35-g block of ice at -14°C is dropped into a calorimeter (of negligible heat capacity) containing 400 g of water at 0°C. When the system reaches equilibrium, how much ice is left in the calorimeter? The specific heat of ice is 2090 J(kg K) and the

7. ## Physics

The question is: A small block of ice at 0oC is subjected to 10 g of 100oC steam and melts completely. Show that the mass of the block of ice can be no more than 80 g. There were no equations in my chapter to use for this question except Q ~ change in T. I

8. ## physics

1.) A vertical spring with a spring constant of 450 N/m is mounted on the floor. From directly above the spring, which is unstrained, a 0.30 kg block is dropped from rest. It collides with and sticks to the spring, which is compressed 2.5 cm in bringing

9. ## physics

A 0.55 kg block of ice is sliding by you on a very slippery floor at 4 m/s. As it goes by, you give it a kick perpendicular to its path. Your foot is in contact with the ice block for 0.0025 seconds. The block eventually slides at an angle of 23 degrees

10. ## physics

A 2.6 kg block of ice at a temperature of 0.0C and an initial speed of 5.3 m/s slides across a level floor. If 3.3 × 105 J are required to melt 1.0 kg of ice, how much ice melts, assuming that the initial kinetic energy of the ice block is entirely

11. ## physics

A block of ice at 0°C whose mass initially is m = 48.4 kg slides along a horizontal surface, starting at a speed vo = 4.91 m/s and finally coming to rest after traveling a distance d = 12.28 m. Compute the mass of ice melted as a result of the friction

12. ## chem

.You have an ice cube that is 150 g and is at a temperature of 0°C. You drop the ice into water that is initially at 15ºC and the ice melts. As a result, the water cools of by exactly 1ºC to become 14ºC. How much water was there? In other words, what

13. ## Physics

an ice block at 0 degree celcius is dropped from height 'h' above the ground. what should be the value of 'h' so that it just melts completely by the time it reaches the bottom assuming the loss of whole gravitational potential energy is used as heat by

14. ## PHYSICS

The latent heat of fusion of water is 3.34 x 105 J/kg. A farmer places a barrel containing 1000 kg of water in his barn one winter's night. When the water cools to 0oC, it begin to freeze. How much heat does the water give out while it is freezing until it

15. ## CHEMISTRY

How much heat energy is needed to convert 125.0g of ice from -27.0ºC to a liquid at 50.0ºC?

16. ## Physics

A 100 lb block of ice slides down an incline 5.0 ft long and 3.0 ft high. A worker pushes up on the ice parallel to the incline so that it slides down at constant speed. The coefficient of friction between the ice and the incline is 0.10. Find (a) the

17. ## physics

A 1.3- block of ice is initially at a temperature of -3.5. If 6.6×105 of heat are added to the ice, what is the final temperature of the system? Find the amount of ice, if any, that remains. Suppose the amount of heat added to the ice block is doubled. By

18. ## Physics

A 2 kg block of ice is placed in a container at 0 °C. How much energy is required to completely melt the block of ice? (Specific latent heat of fusion for ice = 334 J/g.) A little confused as to what formula to use for this

19. ## Math

Im just a little confused on how to answer this question. A ball bounced 64% of the height from which it was dropped. The bounce was 72 cm high. What is the height from which the ball was dropped. I think there has to be an algebraic equation of some sort,

20. ## physics

A foam cube bounces to a height of 15cm when dropped from a height of 100cm. To what height will it bounce if dropped from a height of 2.5cm? How do

21. ## Physics

Calculate the height that a block of ice at 0°C must be dropped to completely melt upon impact. Assume that all of the initial gravitational potential energy of the block goes into melting the ice. Hmmmm. http://www.jiskha.com/display.cgi?id=1162768243

22. ## Physcial Science

Hey There, I have 4 questions that I am totally stumped on... Can anyone help? A 200-gram chunk of stuff rises in temperature by 3oC when you input 1200 calories of heat. What is its specific heat capacity? Answers A)50 cal/goC. B) 2 cal/goC. C) 5 cal/goC.

23. ## Physics - ice to liquid

Fifty grams of hot water at 80oC is poured into a cavity in a very large block of ice at 0oC. The final temperature of the water in the cavity is then 0oC. Show that the mass of ice that melts is 50 g. To melt ice to 50g of water, I think that it will

24. ## physics

If you drop a piece of ice on a hard surface, the energy of impact will melt some of the ice. The higher it drops, the more ice will melt upon impact.Find the height from which a block of ice should ideally be dropped to completely melt it that falls

25. ## physics

A block of mass 4kg is dropped from a height of 2 meters on Earth. If that block is taken to a different planet, where the acceleration due to gravity is 1/4 as strong as it is on Earth, how high should the block be dropped so that it hits the ground with

26. ## Chemistry HEAT OF FUSION

What is the final temperature, in oC, after a 15.0 g piece of ice, at 0oC, is placed in a styrofoam cup with 128 g of water initially at 74.0oC. Assume there is no transfer of heat to or from the surroundings. The specific heat of water = 4.184 JK-1g-1 The

27. ## physics

0.155 kg of water at 86.0oC is poured into an insulated cup containing 0.224 kg of ice initially at 0oC. How many kg of liquid will there be when the system reaches thermal equilibrium?

28. ## physics

1.) A vertical spring with a spring constant of 450 N/m is mounted on the floor. From directly above the spring, which is unstrained, a 0.30 kg block is dropped from rest. It collides with and sticks to the spring, which is compressed 2.5 cm in bringing

29. ## Physics

A vertical spring with a spring constant of 400 N/m is mounted on the floor. From directly above the spring, which is unstrained, a 0.30 kg block is dropped from rest. It collides with and sticks to the spring, which is compressed by 2.7 cm in bringing the

30. ## Physics

A 100 lb block of ice slides down an incline 5.0 ft long and 3.0 ft high. A worker pushes up on the ice parallel to the incline so that it slides down at constant speed. The coefficient of friction between the ice and the incline is 0.10. Find (a) the

31. ## Chemistry

Metal Specific Heat (J/g-C) Al (s) 0.900 Au(s) 0.129 Cu(s) 0.385 Fe(s) 0.444 Hg(l) 0.139 H2O(l) 4.184 C2H5OH(l) 2.46 A piece of metal at a temp of 95.0oC and a mass of 67.0 g is dropped into a beaker of water containing 100 g at a temp. of 30.0oC. If the

32. ## physics

A rectangular block of ice 10 m on each side and 1.1 m thick floats in sea water. The density of the sea water is 1025 kg/m3. The density of ice is 917 kg/m3. a) How high does the top of the ice block float above the water level? m * .116 OK HELP: Use

33. ## Physics

how much work is required to lift a 98-N block of ice if A) it is lifted a vertical distance of 5-m.? B) you push the same block of ice up a 7-m long ramp using in acompare to the work required in b.? C) How does the work required in A compare to the work

34. ## physics

A 150g iron ball is dropped into a cavity in a block of ice. The cavity is then found to contain 21g of water. Calculate the heat of fusion of ice.

35. ## Conceptual Physics

A 120-g chunk of 90 ∘C iron is dropped into a cavity in a very large block of ice at 0∘C. What is the mass of ice that melts. (The specific heat capacity of iron is 0.11 cal/g⋅∘C.).

36. ## Physics

A vertical spring with a spring constant of 450 N/m is mounted on the floor. From directly above the spring, which is unstrained, a 0.30 kg block is dropped from rest. It collides with and sticks to the spring, which is compressed by 3.0 cm in bringing the

37. ## physics

a 150g-iron ball at 95 Celsius is dropped into a cavity in a block of ice

38. ## math

the height that a ball bounces varies directly as the height from which it is dropped. A ball dropped from a height of 20cm bounces 16cm a) Find the height of the bounce if the ball is dropped from a height of 280cm b) Find from waht height the ball was

39. ## physics

A 40g chunk of 90 degree C iron is dropped into a cavity in a very large block of ice at 0 degree C.Find what mass of ice will melt. (The specific heat capacity of iron is 0.11 cal/g degree C)

40. ## physics

A block of ice at 0°C whose mass initially is m = 12.5 kg slides along a horizontal surface, starting at a speed vo = 4.10 m/s and finally coming to rest after traveling a distance d = 10.07 m. Compute the mass of ice melted as a result of the friction

41. ## Physics repost - need more explanation

Posted by Ceres on Wednesday, September 23, 2009 at 4:07pm. The question is: "A block of ice at 0oC is dropped from a height that causes it to completely melt upon impact. Assume that there is no air resistance and that all the energy goes into melting the

42. ## Physical Science

A block of ice at 0^\circ {\rm C} is dropped from a height that causes it to completely melt upon impact. Assume that there is no air resistance and that all the energy goes into melting the ice. What is the height necessary for this to occur.

43. ## Physics

(a) How much heat in kcal must be provided for a 0.853 kg block of lead to raise the temperature of 0.015 kg block of ice from -5ºC to 0ºC? (b) How much heat in kcal must be provided for a 0.853 kg block of lead to melt a 0.015 kg block of ice from at

44. ## Physcial Science

Hey There, I have 4 questions that I am totally stumped on... Can anyone help? A 200-gram chunk of stuff rises in temperature by 3oC when you input 1200 calories of heat. What is its specific heat capacity? Answers A)50 cal/goC. B) 2 cal/goC. C) 5 cal/goC.

45. ## Physcial Science

Hey There, I have 4 questions that I am totally stumped on... Can anyone help? A 200-gram chunk of stuff rises in temperature by 3oC when you input 1200 calories of heat. What is its specific heat capacity? Answers A)50 cal/goC. B) 2 cal/goC. C) 5 cal/goC.

46. ## Science

You have two cups, one containing 100 g of ice at 0oC, the other containing 100 g of water at 80oC. You pour the hot water into the cup containing the ice. What do you wind up with? A) 100 g of 0oC water and 100 g of 80oC water. B) 50 g of 0oC ice and 50g

47. ## physical science

You have two cups, one containing 100 g of ice at 0oC, the other containing 100 g of water at 80oC. You pour the hot water into the cup containing the ice. What do you wind up with? A) 100 g of 0oC water and 100 g of 80oC water. B) 50 g of 0oC ice and 50g

48. ## physics

If you pour 0.0100 kg of 20.0ºC water onto a 1.20-kg block of ice (which is initially at −15.0ºC ), what is the final temperature? You may assume that the water cools so rapidly that effects of the surroundings are negligible.

49. ## phyiscal science

calculate the height a block of ice at -25 deg C must be dropped in order to completely melt on impact. No air resistance and all energy goes into melting the ice.

50. ## physics

Air at 1 atm is inside a cylinder 17.9 cm in radius and 17.9 cm in length that sits on a table. The top of the cylinder is sealed with a movable piston. A 24.1-kg block is dropped onto the piston. a) From what height above the piston must the block be

51. ## Survey of the Sciences

Calculate the height from which a block of ice at zero degrees celcius nust be dropped for it to completely melt upon impact. Assume that there is no air resistance and that all the energy goes into melting the ice.

52. ## Survey of the Sciences

Thank you Damon! now, here's the last part of that along with the first again.... Calculate the height from which a block of ice at zero degrees celcius nust be dropped for it to completely melt upon impact. Assume that there is no air resistance and that

53. ## Physics

divide both sides of the equation by mass, it divides out. mass*HeatFusion=mass*gh How do you calculate the height that a block of ice at 0°C must be dropped to completely melt upon impact. Assume that all of the initial gravitational potential energy of

54. ## Calculus

A block of ice is exposed to heat in such a way that the block maintains a similar shape as it metls. The block of ice is initially 2' wide, 2 'high, and 3' long. If the change in the width of the ice is -1/3 ft/hr, find: the amount of time it will tak

55. ## CHEMISTRY

HOW MANY GRAMS OF ice at 0oc can be melted into water at 0oc by the additon of 75.0 of heat ? hfus = 6.01 kj/mo

56. ## Beginner Chemistry

How much heat energy is needed to convert 125.0g of ice from -27.0ºC to a liquid at 50.0ºC?

57. ## science

How much heat must be removed from 0.20kg of water at 10.0oC to form ice at 0oC?

58. ## Physics

A 0.5 kg wooden block is dropped from a height of 15 m. At what height must a 5g bullet be traveling upward strike the block in order to momentarily stop its fall? Assume that the time required for the bullet to come to rest in the block in negligibly

59. ## chem

help with this problem pease Metal Specific Heat (J/g-C) Al (s) 0.900 Au(s) 0.129 Cu(s) 0.385 Fe(s) 0.444 Hg(l) 0.139 H2O(l) 4.184 C2H5OH(l) 2.46 A piece of metal at a temp of 101.0oC and a mass of 86.0 g is dropped into a beaker of water containing 75.0

60. ## physics

home / study / science / physics / questions and answers / a 10kg block slides towards the 3kg moving block ... Your question has been answered! Rate it below. Let us know if you got a helpful answer. Question A 10kg block slides towards the 3kg moving

61. ## Physics

A vertical spring with a spring constant of 400 N/m is mounted on the floor. From directly above the spring, which is unstrained, a 0.30 kg block is dropped from rest. It collides with and sticks to the spring, which is compressed by 2.3 cm in bringing the

62. ## Physics

A vertical spring with a spring constant of 410 N/m is mounted on the floor. From directly above the spring, which is unstrained, a 0.26-kg block is dropped from rest. It collides with and sticks to the spring, which is compressed by 2.8 cm in bringing the

63. ## Physics

A vertical spring with a spring constant of 400 N/m is mounted on the floor. From directly above the spring, which is unstrained, a 0.30 kg block is dropped from rest. It collides with and sticks to the spring, which is compressed by 2.7 cm in bringing the

64. ## Physics

A 100 lb block of ice slides down an incline 5.0 ft long and 3.0 ft high. A worker pushes up on the ice parallel to the incline so that it slides down at constant speed. The coefficient of friction between the ice and the incline is 0.10. Find (a) the

65. ## science

Hot Steel; Cold Ice: A 36.0 g block of ice sits at −50.0 °C under 1.00 atm constant pressure in a perfectly insulated container. A 225 g mass of stainless steel at 125 °C is dropped onto the ice, and the system is closed. When the system reaches

66. ## Math

The height was 30, the width was 25,and the length is 20. What is the volume, in cubic inches, of the block of ice? I think you multiply 30x25x20 and get 15,000. The answer is 15,000 cubic inches. Harry wants to make another block of ice with the same

67. ## chemistry

How many enthalpy changes (ÄH’s) would be required to calculate the total enthalpy change when ice at 0.0oC is turned to steam at 100.0oC?

68. ## chemistry

I really really need help w/this problem I think i figured it out but i have to be sure i did it right in order to do others similar to it please help thanks Metal Specific Heat (J/g-C) Al (s) 0.900 Au(s) 0.129 Cu(s) 0.385 Fe(s) 0.444 Hg(l) 0.139 H2O(l)

69. ## Physics. Urgent

A vertical spring with a spring constant of 450 N/m is mounted on the floor. From directly above the spring, which is unstrained, a 0.30 kg block is dropped from rest. It collides with and sticks to the spring, which is compressed by 3.0 cm in bringing the

70. ## math

a 150g-iron ball at 95 Celsius is dropped into a cavity in a block of ice.the cavity is then found to contain 21 g of water . calculate the heat of fusion of ice.

71. ## Physics B

A 40-kg block of ice at 0°C is sliding on a horizontal surface. The initial speed of the ice is 7.0 m/s and the final speed is 4.7 m/s. Assume that the part of the block that melts has a very small mass and that all the heat generated by kinetic friction

72. ## physics

A 40-kg block of ice at 0°C is sliding on a horizontal surface. The initial speed of the ice is 7.0 m/s and the final speed is 4.7 m/s. Assume that the part of the block that melts has a very small mass and that all the heat generated by kinetic friction

73. ## Physics

A 2.5 kg block of ice at a temperature of 0C and an initial speed of 5.7 m/s slides across a level floor. If 3.3*10^5 J are required to melt 1.0 kg of ice, how much ice melts, assuming that the initial kinetic energy of the ice block id entirely converted

74. ## Physics

A 3.40 kg block of copper at a temperature of 74 °C is dropped into a bucket containing a mixture of ice and water whose total mass is 1.20 kg. When thermal equilibrium is reached the temperature of the water is 14 °C. How much ice was in the bucket

75. ## physics

A 44.0-g block of ice at -15.0°C is dropped into a calorimeter (of negligible heat capacity) containing of water at 5.0°C. When equilibrium is reached, how much of the ice will have melted? The specific heat of ice is 2090 J/kg ∙ K, that of water is

76. ## physics

A 0.6 kg block of ice is sliding by you on a very slippery floor at 2.5 m/s. As it goes by, you give it a kick perpendicular to its path. Your foot is in contact with the ice block for 0.0035 seconds. The block eventually slides at an angle of 24 degrees

77. ## physics

A rectangular block of ice 8 m on each side and 1.5 m thick floats in sea water. The density of the sea water is 1025 kg/m3. The density of ice is 917 kg/m3. a) How high does the top of the ice block float above the water level? b) How many penguins of

78. ## physics

Hi, ive been trying to get this problem for a couple of days now but i have no idea of what to do. A very slippery block of ice slides down a smooth ramp tilted at angle pheta. a)The ice is released from rest at vertical height h above the bottom of the

79. ## physics

A rectangular block of ice 10 m on each side and 1.1 m thick floats in sea water. The density of the sea water is 1025 kg/m3. The density of ice is 917 kg/m3. a) How high does the top of the ice block float above the water level? m * .116 OK HELP: Use

80. ## Physics! HElp

A g ice cube at -15.0oC is placed in g of water at 48.0oC. Find the final temperature of the system when equilibrium is reached. Ignore the heat capacity of the container and assume this is in a calorimeter, i.e. the system is thermally insulated from the

81. ## Physics

50 grams of ice cubes at -5oC is added to a 1 litre (1 kg) of water that is initially at 30oC. a) Use the table of values to find the energy needed to melt the ice:(energy to raise the temperature of the ice to 0oC+ change the state of the ice to water) b)

82. ## Physics

A dockworker applies a constant horizontal force of 79.0 N to a block of ice on a smooth horizontal floor. The frictional force is negligible. The block starts from rest and moves a distance 13.0 m in a time 4.50 s. What is the mass of the block of ice?If

83. ## Physics

A dockworker applies a constant horizontal force of 79.0 N to a block of ice on a smooth horizontal floor. The frictional force is negligible. The block starts from rest and moves a distance 13.0 m in a time 4.50 s. What is the mass of the block of ice?If

Can you please clarify your response to my post Wednesday April 4th at 8:53pm and 8:54pm. Thanks for all of your help!!! pleasde repost it. Yes, repost it. Go to it, copy, and paste it here. Thanks. A vertical spring with a spring constant of 450 N/m is

How would i find the following? I just need an explanation. I'm stuck. I have many other questions like this and i need to know how to do them. The specfic heat of ice is 2.05 J/g. In a calorimeter, 10.0 g of ice melts at 0oC. The enthalpy of fusion of the

86. ## Will Someone please respond! Chem

How would i find the following? I just need an explanation. I'm stuck. I have many other questions like this and i need to know how to do them. The specfic heat of ice is 2.05 J/g. In a calorimeter, 10.0 g of ice melts at 0oC. The enthalpy of fusion of the

87. ## Chemistry

HELP PLEASE. I have no idea how to set this up. I tried using the q=mc(change in temp) equation but its not working out. A 59.8 g block of an unknown metal at 87.5 degrees Celsius was dropped into an insulated vesssel containing approximately 33 g of ice

88. ## College physics

dockworker applies a constant horizontal force of 80.0N to a block of ice on a smooth horizontal floor. thhe block starts from rest and moves 11.0m in 5.00s. (a) what is the mass of the ice block? (b) if the work stops pushing at the end of the 5.00s, How

89. ## Chemistry

How many grams of Fe can be heated from 40.0oC to 60.0oC when 20.0 g of Cu cools from 100.0oC to 25.0oC? Specific heat of Fe = 0.444 J/(g oC); specific heat of Cu = 0.382 J/(g oC)

90. ## physics

The man fires an 75g arrow so that it is moving at 80 m/s when it hits and embeds in a 13kg block resting on ice. What is the velocity of the block and arrow just after the collision? How far will the block slide on the ice before stopping? A 7.2N friction

91. ## physics

Hot Steel; Cold Ice: A 36.0 g block of ice sits at −50.0 °C under 1.00 atm constant pressure in a perfectly insulated container. A 225 g mass of stainless steel at 125 °C is dropped onto the ice, and the system is closed. When the system reaches

92. ## math

a 150g-iron ball at 95 Celsius is dropped into a cavity in a block of ice.the cavity is then found to contain 21 g of water . CALCULATE THE HEAT OF FUSION OF ICE (The specific heat capacity of iron is 0.11 cal/g x C degrees.)

93. ## Physics

In loading a fish delivery truck, a person pushes a block of ice up a 200 incline at constant speed. The push is 150N in magnitude and parallel to the incline. The block has a mass of 35.0 kg. What is the force of kinetic friction on the block of ice?

94. ## Physics

I've got a question: Imagine this scenario where someone releases a marble down an inclined ramp and at the end of the ramp a block is fixed. So the marble will roll down the ramp and it will collide with the block. Since the block is fixed,

95. ## Physics

A 223.0 g piece of lead is heated to 85.0oC and then dropped into a calorimeter containing 577.0 g of water that initally is at 18.0oC. Neglecting the heat capacity of the container, find the final equilibrium temperature (in oC) of the lead and water.

96. ## physics

There is a problem that asks if an ice cube is dropped into nitrogen (boiling point of nitrogen is 77K), how much nitrogen will evaporate? heat lost by ice = heat gained by nitrogen But by is the equation m(ice)*c(ice)*deltaT = m(nitrogen)*L(vaporation) ?

97. ## physics

A 10kg block slides towards the 3kg moving block to create a totally inelastic head on collision. The 3kg block comes to a stop after the collision. 1. What speed must the 10kg block be moving at prior to the collision for this to occur? 2. Instead of

98. ## Physics

A block of mass m has a spring –spring constant k and length L –connected, vertically, to the bottom. The block is dropped from height h, towards the floor. Assuming the spring is stiff enough that it does not compress fully at the floor, what is the

99. ## physic

c. A 2 kg block of ice has been stored in a chiller at a constant 0°C. In order to carry out an investigation, the block of ice needs to be turned into water at a temperature of 75°C. Calculate how much heat energy is required to change the block of ice

100. ## College Chemistry

How much ice can be melted at 0oC by the condensation of 1.0 kg of steam at 100.oC? (ΔHfus of ice = 6.01 kJ/mol; ΔHvap of water = 40.7 kJ/mol)