
In this problem you will estimate the heat lost by a typical house, assuming that the temperature inside is T(in) = 20 degrees celcius and the temperature outside is T(out) = 0 degrees celcius. The walls have fiberglass insulation, which dominates the heat

In this problem you will estimate the heat lost by a typical house, assuming that the temperature inside is T(in) = 20 degrees celcius and the temperature outside is T(out) = 0 degrees celcius. The walls have fiberglass insulation, which dominates the heat

Consider 3 layers of a wall. The first layer is plaster 1.0 cm thick(R=0.033 SI units), the second layer is fiberglass insulation 8.9 cm thick (r=2.97), and the outside layer is woodd 3.0 cm thick(0.33). What is the heat loss through one square meter of

what should be the resistance of a heating coil which will be used to raise the temperature of 500 grams of water from 28 degrees celcius to 100 degrees celcius in 2 minutes, assuming that 25% of the heat is lost? the heater utilizes 110 volts.

An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees celcius? I have no


An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees celcius? I have no

A heat exchanger is used to warm apple cider using steam as the heat source. The cider is heated from an initial temperature of 4 degrees celcius to a final temperature of 65 degree celcius. The steam enters the heat exchanger as 50% quality steam and

A heat exchanger is used to warm apple cider using steam as the heat source. The cider is heated from an initial temperature of 4 degrees celcius to a final temperature of 65 degree celcius. The steam enters the heat exchanger as 50% quality steam and

A 46.2 gram sample of copper is heated to 95.4 degrees celcius and then place into a calorimeter containing 75.0 grams of water at 19.6 degrees celcius. The final temp of the water and copper is 21.8 degrees celcius. Calculate the specific heat capacity of

A physicist converted 2 kg of water at 37 degrees celcius to steam at 100 degrees celcius. Assuming no heat is lost, calculate the amount of energy needed to heat to 100 degrees celcius.

A 2.8 kg gold bar at 99 degrees celcius is dropped into 0.21 kg of water at 23 degrees celcius What is the ﬁnal temperature? Assume the speciﬁc heat of gold is 129 J/kg times degrees celcius. Answer in units of degrees celcius

An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees celcius?

Find the mass of iron heated to 85 degrees celcius that was added to 54.0 grams of water. The temperature of the water changed from 20 degrees celcius to 60 degrees celcius. The specific heat of the iron is 0.045 J/g degrees celcius

How many joules of heat are needed to heat 25.0 g of ice at 5.0 degrees celcius to a final temperature of 40.0 degrees celcius? The specific heat of ice is 2.1 j. Our teacher mention to consider the state of water present at 40.0 degrees celcius which is

If 150.0 grams of iron at 95.0 degrees Celcius, is placed in an insulated container containing 500.0 grams of water at 25.0 degrees Celcius, and both are allowed to come to the same temperature, what will that temperature be? The specific heat of water is


In lab you submerge 100 g of 41 degree Celcius iron nails in 100 g of 25 degree Celcius water (the specific heat of iron is 0.12 cal/g degrees Celcius) A)Equate the heat gained by the water to the heat lost by the nails and find the final temperature of

This expression 1.8C + 32, show how to convert from degrees Celcius to degrees Fahrenheit, where C represents the temperature in degrees Celcius. What is the temperature in degrees Farrenheit when the temperature is 25 degrees Celsius?

If 100g of zinc (c=377J/kg degrees celcius) at 95 degrees celcius is dropped into 60g of water contained in a 100g calorimeter (c=419J/kg degrees celcius) at 20 degrees celcius, what will the final temperature be?

Compare the amount of heat required to change the temperature of 150 kg of copper from 12 degrees celcius to 56 degrees celcius to the amount of heat required to change the temperature of 150 kg of gold from 12 degrees celcius to 56 degees celcius.

What is the heat evolved of oxalic acid if the temperature change initial is 28 degrees celcius and the final is 29 degrees celcius and the change in temperature is 1 degree celcius,what is the heat capacity of axolic acid

How much heat is needed to raise the temperature of 20g of copper from 20 degrees celcius to 40 degrees celcius? (The specific heat of copper is 385J/Kg degrees celcius)

calculate the heat energy required to raise the temperature of a 500. gram iron pipe from 25 degress celcius to 100 degrees celcius. the specific heat for iron is .45 J/g degrees celcius

The temperature in your house is controlled by a thermostat. The temperatures will vary according to the sinusoidal function: f(x)=5sin(pi/12)*(x11)+19 where f(x) represents the temperature in degrees Celsius (°C) and x is hours since midnight. What is

Fifty grams of ice at 0 degrees celcius is added to 200grams of water at 40 degrees celcius contained in a 100 grams copper calorimeter. If the final temperature of the mixture is 16 degrees celcius, find the heat of fusion of ice.

An unknown piece of metal weighing 100. g is heated to 90.0 degrees Celcius. It is dropped into 250 g of water at 20.0 degrees Celcius. When equilibrium is reached, the temperature of both the water and piece of metal is 29.0 degrees Celcius. Determine the


If the air temperature is the same as the temperature of your skin (about 30 degrees Celcius), your body cannot get rid of heat by transferring it to the air. In that case, it gets rid of the heat by evaporating water (sweat). During bicycling, a typical

What would be the final temperature when 125g of 25 degrees Celcius water is mixed with 85g of 45 Degrees Celcius water? ( hint: Equate the heat gained by the cool water with the heat lost by the warm water.)

A copper calorimeter of mass 150g, was half filled with water of mass 300g and temperature 0 degrees celcius. 5g of ice at 0 degrees celcius was added to the content, later some quanity of steam was passed into the mixture and the temperature rose by 20

Any help would be great, even if it is just a way to start or a formula. Calculate the heat necessary to convert 10.0 g of water (just melted) at 0 degrees Celcius to water at 20 degrees Celcius, assuming that the specific heat remains constant at 1

How many joules (J) are needed to increase the temperature of 43.0g of aluminum from 25 degrees celcius to 50 degrees celcius? (Cp of Al=0.90J/g degrees of celcius) I also need the formula, data, and answer.

A house with a room wall of 5m by 3m is build of bricks of 20 cm. if internal temperature is 21 degrees celcius and those outside 18 degres celcius; what is the amount of heat flow if thermal conductivity is 0.63

a BATH CONTAINS 100 KG OF WATER AT 60 DEGREES CELCIUS. HOT AND COLD TAPS ARE THEN TURNED ON TO DELIVER 20KG PER MINUTE EACH A TEMPERATURE 70 DEGREES CELSIUS AND 10 DEGREES CELSIUS RESPECTIVELY. HOW LONG WILL IT BE BEFORE THE TEMPERATURE IN THE BATH HAS

A BATH CONTAINS 100 KG OF WATER AT 60 DEGREES CELCIUS. HOT AND COLD TAPS ARE THEN TURNED ON TO DELIVER 20KG PER MINUTE EACH A TEMPERATURE 70 DEGREES CELSIUS AND 10 DEGREES CELSIUS RESPECTIVELY. HOW LONG WILL IT BE BEFORE THE TEMPERATURE IN THE BATH HAS

A lead calorimeter with mass of 150g contains 200g of water. The calorimeter and water are in thermal equilibrium at a specific temperature. Two metallic blocks are placed into the water. One is a 50.0g piece of aluminum heated at 90 degrees celcius. The

A lead calorimeter with mass of 150g contains 200g of water. The calorimeter and water are in thermal equilibrium at a specific temperature. Two metallic blocks are placed into the water. One is a 50.0g piece of aluminum heated at 90 degrees celcius. The


How do you solve this equation? A piece of aluminum with a mass of 3.90g and a temperature of 99.3 degrees celcius is dropped into 10.0 g of a water at a temperature of 22.6 degrees celcius. What is the final temperature of the system?

A 5. pellet of aluminum at 20 degrees celcius gains 200 joules of heat. What is its final temperature? [specific heat of Aluminium, c=920 j/Kg. degrees celcius)

Calculate the specific heat of a metallic element if 314 jouldes of heat energy are needed to raise the temperature of a 50g sample from 25 degrees Celcius to 50 degrees Celcius?

the temperature of a 10m long metal bar is 15 degrees celcius at one end and 30 degrees celcius on the other end. Assuming that the temperature increases linearly from the cooler end to the hotter end, what is the average temperature of the bar? Also,

What is the final temperature (degrees celcius) of 1.36g of water with an initial temperature of 23.0degrees celcius after 6.420J of heat is added to it?

Assuming complete dissociation of the solute, how many grams of KNO3 must be added to 275 mL of water to produce a solution that freezes at 14.5 degrees celcius ? The freezing point for pure water is 0.0 degrees celcius and Kf is equal to 1.86 degrees

How much heat is required to raise the temperature of a 35.0g block of aluminium from 125 degrees celcius to 322 degrees celcius?

When 90 kJ is removed from a 2kg copper bar its temperature drops from 200 degrees celcius to 85 degrees celcius what is the specific heat of the iron?

How much heat energy is required to raise the temperature of 4.50 liters of water from 36 degrees celcius to 44.6 degrees celcius?

How much heat is required to raise the temperature of a 125g block of iron from 17.5 degrees celcius to 82.3 degrees celcius?


A 100g piece of ice at 0 degrees celcius is placed into a container holding 200g of water, initially at temperature 25 degrees celcius. Heat flows from the water to the ice, cooling the water and melting the ice. Calculate a) how many moles of ice and how

how much heat would it take to raise the temperature of 52.0 grams of water from 22.0 degrees celcius to 100.0 degrees celcius

a 100.0 gram metal sample is heated to a temperature of 110 degrees celcius then placed into a calorimeter containing 100.0 r of pure water (at initial temperature of 23 degrees celcius). after the sample and water reach thermal equalibrium, their final

You have 300 g of coffee at 55 degrees celcius. Coffee has the same specific heat as water. How much 10 degrees celcius water do you need to add in order to reduce the coffee's temperature to a more bearable 49 degrees celcius?

You have 300 g of coffee at 55 degrees celcius. Coffee has the same specific heat as water. How much 10 degrees celcius water do you need to add in order to reduce the coffee's temperature to a more bearable 49 degrees celcius?

You have 300 g of coffee at 55 degrees celcius. Coffee has the same specific heat as water. How much 10 degrees celcius water do you need to add in order to reduce the coffee's temperature to a more bearable 49 degrees celcius?

You have 300 g of coffee at 55 degrees celcius. Coffee has the same specific heat as water. How much 10 degrees celcius water do you need to add in order to reduce the coffee's temperature to a more bearable 40 degrees celcius?

You have 300 g of coffee at 55 degrees celcius. Coffee has the same specific heat as water. How much 10 degrees celcius water do you need to add in order to reduce the coffee's temperature to a more bearable 49 degrees celcius?

You have 300 g of coffee at 55 degrees celcius. Coffee has the same specific heat as water. How much 10 degrees celcius water do you need to add in order to reduce the coffee's temperature to a more bearable 49 degrees celcius?

Suppose you want to heat a mug of H2O (250ml) from room temperature 25 degrees celcius to 100 degrees celcius. How much energy would you need from your microwave?


calculate the heat energy required to raise the temperature of a 500 gram iron pipe from 25 degrees celcius to 100 degrees celcius

A 542g piece of copper tubing is heated to 89.5 degrees Celcius and placed in an insulated vessel containing 159 g of water at 22.8 degrees Celcius. Assuming no loss of water and a heat capacity for the vessel of 10.0 J/K, what is the final temperature of

In a house the temperature at the surface of a window is 22.3 °C. The temperature outside at the window surface is 2.82 °C. Heat is lost through the window via conduction, and the heat lost per second has a certain value. The temperature outside begins

In a house the temperature at the surface of a window is 20.1 °C. The temperature outside at the window surface is 2.72 °C. Heat is lost through the window via conduction, and the heat lost per second has a certain value. The temperature outside begins

Hot water of mass 80g, at a temperature of 100degree celcius is pourd into 30g of water at 30degree celcius. Assuming that no heat is lost, calculate the final temperature

The celcius scale is devised so that 0 degrees celcius is the freezing point of water ( at 1 atmosphere of pressure) and 100 degrees celcius is the boiling point of water ( at 1 atmosphere of pressure) . If you are more familiar with the Fahrenheit scale,

A quantity of ice at 0 degrees celcius is added to 64.3 grams of water in a glass at 55 degrees celcius. After the ice melted, the temperature of the water in the glass was 15 degrees celcius. How much ice was added? The heat of fusion of water is

A sample of KOH is dissolved into 100.0 grams of water in a coffee cup calorimeter. if the dissolution produces 6.45 kJ of heat and the temperature change is 25.4 degrees celcius to 40.0 degrees celcius, how much KOH (in grams) is added to the water? (the

You are trying to compare the Farenheit and Celcius scales and you have two examples; Temperatur A is 50 degrees Celcius and 122 Farenheit. Temperature B is 100 degrees Celcius and 212 degrees Farenheit. What graph models the relationship between Farengeit

NaOH + HCl > NaCl + HOH I need to figure out the quantity of heat in this reaction. The volume of the solution is 150 mL (NaCl + HOH). The inital temperature is 26 degrees celcius and the final temperature is 23 degrees celcius. That's all I know.


When 45 grams of an alloy is dropped into 100.0 grams of water at 25 degrees celcius, the final temperature is 37 degrees celcius. what is the specific heat of the alloy? the alloys Temperature is 100 degrees celsius

a cubic piece of uranium metal (specific eat capacity= .117 J/g degree celcius) at 200.0 degrees celcius is droped into 1.00 L of deuterium oxide ("heavy water", specific heat capacity=4.211 J/g degree celcius) at 25.5 degrees celcius. the final

Ksp of PbI2 at 25 degrees celcius and 15 degrees celcius is 7.5×10^8 and 7.5×10^9 respectively. (Pb=207 I=127) 1) write an expression for the equilibrium of PbI2 2)write an equation for the Ksp of PbI2 3)calculate the solubility of PbI2 at 25 degrees

A COPPER BLOCK ,MASS 500g AND AT 200 DEGREES CELCIUS GIVES OUT ENERGY AT AN AVERAGE RATE OF 50W. (i)what is temperature after 5 min ? (ii)how long will it take before its temperature drops to 50 degrees celcius

a bunsen burner flame takes 8 minutes to raise 250g of water from 20 degrees to 100 degrees celcius, when the water is in a beaker of mass 100g (c=0.67J/g degrees celcuius). How long will i take to raise the temperature of 200g of glycerin (c=2.43J/g

what is the heat capacity of iron when a 15.75g piece of iron absorbs 1086.75 joules of heat energy, and it's temperature changes from 25 degrees celcius to 175 degrees celcius

How much energy is needed to increase the temperature of 500g of lead from 20 degrees celcius to 45. The specific heat heat capacityof lead is 128J/kg/degrees celcius

A 40.0g sample of an unknow, yellowishbrown, pure metal was heated to 62degrees Celcius and put into a coffee cup calorimeter containing 85.0g of watera at 19.2 degrees Celcius. The water was heated by the hot metal to a temperature of 21.0 degrees

A 40.0g sample of an unknow, yellowishbrown, pure metal was heated to 62degrees Celcius and put into a coffee cup calorimeter containing 85.0g of watera at 19.2 degrees Celcius. The water was heated by the hot metal to a temperature of 21.0 degrees

The top layer of your goose down sleeping bag has a thickness of 5.0 cm and a surface area of 1.0 m^2. When the outside temperature is 18 degrees celcius you lose 24 Cal/hr by heat conduction through the bag (which remains at a cozy 34 degrees celcius


The top layer of your goose down sleeping bag has a thickness of 5.0 cm and a surface area of 1.0 m^2. When the outside temperature is 18 degrees celcius you lose 24 Cal/hr by heat conduction through the bag (which remains at a cozy 34 degrees celcius

a .300 kg piece of metal is heated to 88 degrees celsius and placed in a copper calorimeter with a mass .150 kg which contains .500kg which contains .500 L of water that are both initially at 12.6 degrees celcius. Over short period of time the mixture

an open container with 10L of water at 1 bar and 20 C is used for cooling electronic parts.Each electronic part has a mass of 01.kg and an average specific heat of 0.14 kJ/kgK. The electronic parts are initially at 300 degrees Celcius and are required to

A metal object with a mass of 19g is heated to 96 degrees celcius, then transfered to a calorimeter containing 75 g of water at 18 degrees celcius. The water and metal object reach a final temperature of 22 degrees celcius. What is the specific heat of

7750 J of energy is added to a 325g stone at 24.0 degrees celcius. The temperature increases by 75.0 degrees celcius. What is the specific heat of the stone?

Which needs more energy: to heat 5 kg of copper from 20 degrees celcius to 50 degrees celcius or to heat 0.5 kg of water from 20 degrees celcius to 50 degrees celcius?

The temperature of a 12.58g sample of calcium carbonate increases from 23.6degrees celcius to 38.2 degrees celcius. If the heat capacity is 0.82J/gK, how many Joules of heat are absorbed

A food company uses a calorimeter to measure the amount of heat produced whena breakfast food is burned. The temperature of 100 ml of water changes from 10 degrees celcius to 45 degrees Celcius. How many calories are released?

a piece of gold is heated to 100 degrees celsius. A piece of copper is chilled in an ice bath to 0 degrees celsius. Both pieces of metal are placed in a beaker containing 150 g of water at 20 degrees celcius. Will the temperature of the water be greater

The temperature in your house is controlled by a thermostat. The temperatures will vary according to the sinusoidal function:f(x)=6sin(pi/12(x11)+19, where f(x) represents the temperature in degrees Celsius (°C) and x is hours since midnight. What is the


the specific heat capacity of seawater is 3900 j/kg degrees celcius. how much energy is needed to heat 500g of seawater from 20 degrees celcius to 90 degrees celcius? if not i need to know how to work it out

find the heat flow through the sides of an 25cm tall by 10cm wide of ice water in 46s.The glass is 6.00mm thick; the temperature is inside is 28 celcius, the temperature outside is 50 celcius

120 grams of an unknown metal at a temperature of 95 degrees celcuius is poured into 140 grams of aluminum calorimeter containing 220 grams of water. If the inital temperature of the water and calorimeter was 15 degree celcuius and the final temperature

how to determine the amount of water in the container when you are given a 200g piece of aluminium at 90 degrees celcius is placed in a 100g glass container which holds an unknown amount of water at 20 degrees celcius .if the equilibrium temperature is

two slabs of thickness 10cm and 2ocm are made of rteel and copper respectively.they are in thermal contact with each oth.the far end of the steel is at 100 degrees celcius amd that of copper is at 0 degrees celcius.determine the temperature at the junction

two slabs of thickness 10cm and 2ocm are made of rteel and copper respectively.they are in thermal contact with each oth.the far end of the steel is at 100 degrees celcius amd that of copper is at 0 degrees celcius.determine the temperature at the junction

two slabs of thickness 10cm and 2ocm are made of rteel and copper respectively.they are in thermal contact with each oth.the far end of the steel is at 100 degrees celcius amd that of copper is at 0 degrees celcius.determine the temperature at the junction

1. What happens to the temperature of water when 10J of energy are added if you have 10.00g of water? 2. What happens to the heat of the water if the temperature is cooled from 25.0 degrees celcius to 10.0 degrees celcius if you have 10.00g of water?

0.5kg of orange squash at 30 degrees celcius is placed in a refrigerator which can remove heat at an average rate of 20J/s.How long will it take to cool the orange squash to 5 degrees celcius (the specific heat capacity is 4200J/kg degrees celcius)

nitrigen gas is used to inflate the tyres of Lewis Hamilton's racing car if the tyre is inflated to a pressure of 2,2 atm at 25 degrees celcius and he takes the car for a lap it heat up to 50 degrees celcius what is the pressure at this temperature


we add 100 ml of water at 20 degrees celcius to 10g of an unknown substance which is at 50 degrees celcius. The water ends up at 25 degrees celcius. how much heat was transfered?

You mix 50.0 ml of 2.0 M HCl and 50.0 ml of 2.0M NaOH. The temperature of the resulting solution increases from 22.5 degrees celcius to 32.3 degrees celcius. What is the q of the calorimeter

While the pressure of 1.40L of gas is kept constant, its temperature is increased from 27 degrees Celcius to 177 degrees Celcius, How do I calculate the new volume?

If the temperature of a solution goes from 27 degrees celcius to 36 degrees celcius for a 5,0 g sample, how would you determine the energy produced by the reaction?

0.2 kg of ice at 0 degrees celcius is mixed with 500g of water at 25 degrees celcius. What is the resulting temperature?