In an experiment to determine the rate at which heat is extracted from a hot material, 305 g of the material at 90 °C is put into a 50 mm diameter copper vessel to a depth of 90 mm as

59,325 results
  1. Chemistry

    1) What Physical properties, other than specific heat, could you use to help identify unknown metals? 2) Why is water an excellent material to use in a calorimeter? Density, color, resistivity (or conductitivy), melting point, crystallization. 2) water is

  2. Science

    PLEASE HELP Science Test Friday Study Guide? I have 1 to 22 already but I am stuck now I have to have this completed and correctly for my study guide. I have a C right now I need an A on this test to bring it up to a B or I stay on restriction please help

  3. Science

    A man relaxes in his hot tub after a long day at work. hid ody temperature is 98.6 F. The temperature of the water in the hot tub is 102 F. How does heat transfer A) Heat does not transfer between his body and the water. B) Heat transfers to his body from

  4. Chemistry

    i need help with a rate law question: The reaction is 2ClO2(aq) + 2OH -(aq)---> ClO3-(aq)+ ClO2-(aq) + H2O(l) Experiment 1: [ClO2]0= 0.0500 [OH-]0= 0.100 INITIAL RATE= 5.75*10^-2 Experiment 2: [ClO2]0= 0.100 [OH-]0= 0.100 INITIAL RATE= 2.30*10^-1

  5. Biology

    In an experiment designed to measure the distance a golf ball is hit by clubs made of different material, a standardized variable would be: A The distance the golf ball traveled B The type of material the club is made of C The material the golf ball was

  6. Chemistry--need help!

    1. The initial reaction rate for 0.02 moles produced in a 5-L vessel in the 1st 2 seconds is a. 0.2 M/s b. 0.04 M/s *** c. 0.002 M/s d. 0.05 M/s 2. Use the table below to calculate the initial reaction rate of the following reaction: 2A→B+C [A]/M | t/s

  7. Physics

    A jetliner flies west 2,000 miles from Chicago you San Francisco. It has an average speed of 635 mph relative to the air. What is the velocity of the jetliner relative to the earth of the wind is blowing at 160 mph from the west to the east? 475 mph, east

  8. Science

    ) Mare is preparing an experiment using 3 cups, one made of paper, one of plastic and one of glass. She plans on pouring 50 ml of hot water from a pitcher into each of the 3 cups and record the temperature in 5 minute intervals. What is the independent

  9. Chemistry-Dr.Bob

    You are at your cabin in the woods. Will you be able to take a hot bath tonight if only 0.1 lb of propane remains in the tank? Explain. My answer: No, I will not be able to take a hot bath. By making assumptions and approximations, I got... energy released

  10. uah

    Assume you are performing the calibration step of Experiment 8 and you begin with 70 g of water at 20 oC and 70 g of water at 80 oC. After adding the two portions of water into your calorimeter setup and following the procedure outlined in the experiment,

  11. Chemistry hard problem

    Kinetics Challenge Problem Consider the following reaction: CH3X + Y → CH3Y + X At 25oC, the following two experiments were run, yielding the following data: Experiment 1 : [Y]0 = 3.0 M [CH3X] Time(hr) 7.08 x 10-3M 1.0 4.52 x 10-3M 1.5 2.23 x 10-3M 2.3

  12. biology

    Why can’t the producers in some ecosystems make an unlimited supply of organic material? Temperatures are too hot for photosynthesis Too many carnivores eat the producers Energy needed to make organic material is lost as heat One or more utrients is in

  13. Science

    Why is a material with a high specific heat capacity better suited for use in a heating system than a material with low heat capacity?

  14. Chemistry

    The reaction of nitrogen dioxide with fluorine generates nitryl fluoride: 2NO2(g) + F2(g) --> 2NO2F(g) To determine the rate law for this reaction, a chemist performed several initial-rate experiments using different initial concentration, with the details

  15. Chemistry

    In chemistry, we did a lab in which we had a certain mass of copper, performed multiple experiments on the copper, and at the end, extracted the copper from a solution and weighed it. The goal was that the mass of the final copper should be the same as the

  16. science

    5.imagine you are at the beach on a very hot day. you walk toward the water. the sand is eextremly hot. when you reach the water, you find that the water is much cooler than sand. a) using the term heat capacity, explain why the sand is hot and water is

  17. Chemistry

    Describe an experiment using only hot and cold water that would allow you to verify that the heat capacity of a coffee-cup calorimeter is about 1.0x10^1 J/oC. Be specific.

  18. physics

    a hot air balloon rise above the ground, accelerating upwards at a rate of 2 m/s^2. The total mass of the hot air balloon and it occupants is 400kg. the density of the air is 1.3 kg/m^3. a) Determine the volume if the hot air balloon. b) if this

  19. biology

    Two students conducted experiments to study the rate of photosynthesis in Lycopersicon esculentum L. Experiment 1 The students designed an apparatus that measures the rate of water absorption. Experiment 2 The students used a setup that measures oxygen

  20. Science

    Natural gas is extracted from the ground and used as a source to produce heat for homes and businesses.

  21. basics and tools of floral design

    The fabric label doesn’t say if the linen was preshrunk. You test the fabric for shrinkage and determine it needs to be shrunk. How do you do this? A. Wash the material in cold water and dry on high in dryer. B. Immerse the material in hot water and drip

  22. Physics

    What are the independent and dependent variables in the following scientific investigation? Controlled variables are also being used in this investigation. Identify the controlled variables as well. A chemistry student is conducting an experiment to

  23. chemistry 1310

    The decomposition of nitrosyl bromide is followed by measuring total pressure because the number of moles of gas changes; it cannot be followed colorimetrically because both NOBr and Br2 are reddish brown: 2 NOBr(g) ® 2 NO(g) + Br2(g) Use the data in the

  24. ap chem

    What type of experiment can be done to determine if a material is paramagnetic?

  25. physics

    The recovery time of a hot water heater is the time required to heat all the water in the unit to the desired temperature. Suppose that a 62-gal (1.00 gal = 3.79 x 10-3 m3) unit starts with cold water at 11 °C and delivers hot water at 53 °C. The unit is

  26. Science please help ASAP

    What is an echo? the absorption of sound waves the transmission of sound waves the reflection of sound waves****(?) the vibration of sound waves Which is an example of the flow of heat through conduction? Hot air rises to the top of a room. A hot-air

  27. Science

    I really need help, what kind of renewable energy is used for hot water? I know that Geothermal heat pumps can be used to heat a house up, but what can create hot water? Thanks.

  28. Science

    A cold cast iron skillet is placed onto a stove top. When the stove is turned on, the skillet becomes very hot. Why does the skillet become hot? A) The skillet is losing energy (heat) to the stove. B) The stove is gaining energy (heat) from the skillet. C)

  29. thermodynamics

    3.4 A heat engine operates between two heat reservoirs with temperatures of 560 and 280 K a) The heat engine itself has a temperature of 560 K during heat addition from the 560 K reservoir and a temperature of 280 K during heat rejection to the 280 K

  30. science

    Which material would have a higher specific heat: a. a material made of heavier particles b. a material made of lighter particles c. the mass of the particles does not affect specific heat

  31. physics

    Which of the following is a True Statement? PLEASE EXPLAIN ANSWER A) It is possible for heat to flow spontaneously from a hot body to a cold one of from a cold one to a hot one, depending on whether or not the process is reversible or irreversible. B) It

  32. science

    5.imagine you are at the beach on a very hot day. you walk toward the water. the sand is eextremly hot. when you reach the water, you find that the water is much cooler than sand. a) using the term heat capacity, explain why the sand is hot and water is

  33. physic-heat

    the specific heat of water is one of the highest of all substances.why does this make water a useful liquid to use in hot water bottles? and could you use a lump of nickel to warm your bed instead of a hot water bottle?which would be better? why? I will be

  34. physics

    In an experiment to determine the rate at which heat is extracted from a hot material, material at 90 °C is put into a copper vessel. The hot material and calorimeter are placed in a container holding cold water at 22.7 °C. The temperature of the water

  35. sarah

    In an experiment to determine the rate at which heat is extracted from a hot material, 305 g of the material at 90 °C is put into a 50 mm diameter copper vessel to a depth of 90 mm as shown below. The hot material and calorimeter are placed in a container

  36. physics

    In an experiment to determine the rate at which heat is extracted from a hot material, 305 g of the material at 90 °C is put into a 50 mm diameter copper vessel to a depth of 90 mm as shown below. The hot material and calorimeter are placed in a container

  37. Biology

    hi! so I have to make an experiment on heat loss & insulation and so, I did an experiment on which material insulates best against the wind of a fan--styrofoam, plastic or aluminum can. each has hot water in it but the styrofoam took the longest for the

  38. geometry

    Hot air balloons require large amounts of both hot air and fabric material. A hot air balloon is spherical with a diameter of 25 feet . a. Does finding the surface area help you determine the amount of the hot air or the fabric material? Explain

  39. Physics

    A reversible heat engine operates between thermal reservoirs at 1000 K and 290 K. If 8610 J is extracted from the hot reservoir, how much work is done by the heat engine?

  40. Chemistry Help ????

    Experiment - Recrystallization of a solid Purpose in this experiment acetanilide will be recrystallized from water, which serves as the solvent.. Pre-Lab Questions.... Explain the purpose of the following in this experiment. a) using hot filtration b) not

  41. Physics

    The specific heat capacity of a material is 1200 J/(kg°C). The temperature of 3.0 kg of this solid material is raised by 6.0°C. Ignoring the work that corresponds to the small change in the volume of the material, determine the change in the internal

  42. Chem Urgent Help ?

    I have a lab dis monday .. plz someone help .. Lab Title is (( Recrystallization of a Solid )) Pre-Lab Questions.... Explain the purpose of the following in this experiment. a) using hot filtration b) not cooling (chilling) the hot filtered solution

  43. general science

    When heat energy travelsby convection enrgy is transferred by the circulation of heated material is this tru? Yes. Convection heat transfer takes place as the result of circulation of a fluid between hot and cold regions.

  44. science grade 5

    how is heat related to temperature? Temperature tells us the DEGREE of heat; i.e., how hot is something. A temperature of 98.6 F is normal body temperature. A hot day is when the temperature is 95 degrees F. A cold day is when it is freezing outside. But

  45. college chem

    In this experiment a hot metal block at 100oC is added to cold water in a calorimeter. The heat lost by the metal block equals the heat gained by the water and the two end up at the same temperature. In one experiment, the mass of the metal block is 89.5

  46. Physics

    Help!!!! Please!!! The coefficient of performance of a refrigerator is defined as the ratio of heat extracted from the refrigeration compartment to the work required to operate the refrigerator. A certain refrigerator has a coefficient of performance of 4

  47. Probability

    A box contains 10 balls. Three of them are white, five are red, and two are black. Calculate the following probabilities: a) The first ball extracted is red. b) The first ball extracted is red or white. c) The second ball extracted is red given that the

  48. Separation of Racemate

    You have the racemate of a material. This material has an acid group as part of its structure. You also have a chiral base available. Design an experiment to separate the racemate into pure enantiomers. I have no ideas about this experiment and I need some

  49. chemistry

    ) Mare is preparing an experiment using 3 cups, one made of paper, one of plastic and one of glass. She plans on pouring 50 ml of hot water from a pitcher into each of the 3 cups and record the temperature in 5 minute intervals. What is the independent

  50. CHEMISTRY

    A(aq) + B(aq) + C(aq) → D(aq) [A]. [B]. Rate (mol) 0.01 0.02 0.0005 0.02 0.02 0.0010 0.01 0.04 0.0020 Determine : a) The order of the reaction of each reactant b) The rate law c) The rate constant K, Using result from experiment 1. Please working answers

  51. Chemistry

    One last question.... Which of these two metals (Aluminum or Copper) would be a better choice to make silverware out of? Specific heat of: Al = .901 Cu = .39 my guess was the aluminum, because it would take longer for it to get hot, since it requires more

  52. AP Chemistry

    One last question.... Which of these two metals (Aluminum or Copper) would be a better choice to make silverware out of? Specific heat of: Al = .901 Cu = .39 my guess was the aluminum, because it would take longer for it to get hot, since it requires more

  53. chemistry

    Consider the following reaction: CH3X + Y  CH3Y + X At 25oC, the following two experiments were run, yielding the following data: Experiment 1 : [Y]0 = 3.0 M [CH3X] Time(hr) 7.08 x 10-3M 1.0 4.52 x 10-3M 1.5 2.23 x 10-3M 2.3 4.76 x 10-4M 4.0 8.44 x

  54. Chemistry

    Microwave ovens heat food by creating microwave electromagnetic radiation that is absorbed by water molecules in the food. Any material that does not have water in it will not absorb the radiation and will not get hot. Metals reflect the microwaves from

  55. Impossible chemistry problem

    Kinetics Challenge Problem Consider the following reaction: CH3X + Y → CH3Y + X At 25oC, the following two experiments were run, yielding the following data: Experiment 1 : [Y]0 = 3.0 M [CH3X] Time(hr) 7.08 x 10-3M 1.0 4.52 x 10-3M 1.5 2.23 x 10-3M 2.3

  56. Impossible chemistry problem

    Kinetics Challenge Problem Consider the following reaction: CH3X + Y → CH3Y + X At 25oC, the following two experiments were run, yielding the following data: Experiment 1 : [Y]0 = 3.0 M [CH3X] Time(hr) 7.08 x 10-3M 1.0 4.52 x 10-3M 1.5 2.23 x 10-3M 2.3

  57. Posted several times know one gets A

    Kinetics Challenge Problem Consider the following reaction: CH3X + Y → CH3Y + X At 25oC, the following two experiments were run, yielding the following data: Experiment 1 : [Y]0 = 3.0 M [CH3X] Time(hr) 7.08 x 10-3M 1.0 4.52 x 10-3M 1.5 2.23 x 10-3M 2.3

  58. Please help this is due Chemistry Ap

    Kinetics Challenge Problem Consider the following reaction: CH3X + Y → CH3Y + X At 25oC, the following two experiments were run, yielding the following data: Experiment 1 : [Y]0 = 3.0 M [CH3X] Time(hr) 7.08 x 10-3M 1.0 4.52 x 10-3M 1.5 2.23 x 10-3M 2.3

  59. chem

    In an experiment to determine heat loss to a calorimeter, 100.0 mL of cool water was measured into the calorimeter and allowed to reach room temperature before 100.0 mL of heated water was added. The results of this experiment produced the data below. What

  60. Physics

    #1.) A wind turbine has a Cp of 0.42 and extracts 50 kW of power when the wind velocity is 25 m/sec. How long are the blades? (ρ = 1.2 kg/m3) #2.) An electric hot water heater is used to heat 30 gallons of water from 20 °C to 45 °C. a. What heat energy

  61. Chemistry

    Is 4786 Jules of heat are transferred to 89 g sample of an unknown material within the initial temperature of 23°C what is the specific heat of the material if the final temperature is 89.5 ° C

  62. Heat and properties of matter

    1. Which of the following is not true a. Evaporation occurs at any temprature of a liquid b. Boiling takes place only at the surface of the liquid c. Evaporation occursonly at the surface of a liquid d. Boiling of a liquid takes place at a definite

  63. math

    Problem The latent heat of fusion (solid become liquid) for ice is 79.8 cal/gram. How much ice can we melt with 1000 calories of heat? Problem Which would require more heat, melting 500 g of 0 C ice or turning 500 g of 100 C water into steam? Problem A 500

  64. Statiatics

    Need help please. Determine whether each experiment is a binomial experiment or can be reduced to a binomial experiment. If so, describe a trial, determine the random variable, and state n, p and q. a) You roll a die 15 times and find the sum of all the

  65. sewing2

    please help me i need help on these qestions ive tried doing them even asking others for help but no one seems to understand them.... Ms. Troy would like you to make a copy of an outfit that she owns and really likes—a sleeveless dress with a

  66. Chemistry

    LAB STUDENT is asked to determine the heat of neutralization for H + OH --> H2O by combining 1 M NaOH and 1 M HCl in an open styrofoam calorimeter. Assume 1. solutions are same temp at start 2. densities of solutions are the same as h20 3. specific heat

  67. Chemistry

    Water can be heated in tightly woven baskets by dropping in hot rocks. The technique is useful for cooking in the absence of metal or pottery vessels. Estimate the size (in liters) of basket needed to hold the rocks and water if 5 L of boiling-hot (100°C)

  68. Chemistry

    Water can be heated in tightly woven baskets by dropping in hot rocks. The technique is useful for cooking in the absence of metal or pottery vessels. Estimate the size (in liters) of basket needed to hold the rocks and water if 5 L of boiling-hot (100°C)

  69. English

    The poem Rose Pogonias is the poem. Which is the best paraphrase of lines 5-9? A. we stretched out in the heat of the flowers in this windless hot air place filled with strong odors. B. There was plenty of wind and the sickening stench of flowers while we

  70. Chemistry

    Hi I was hoping to get some help on this. It's review for my chemistry text on Monday and I would be grateful if someone could help me out. My teacher has been out for two weeks but we still have to know this material. 1. The following data was collected

  71. chemistry

    Assume you are performing the calibration step of Experiment 8 and you begin with 70 g of water at 20 oC and 70 g of water at 80 oC. After adding the two portions of water into your calorimeter setup and following the procedure outlined in the experiment,

  72. Chemistry

    Assume you are performing the calibration step of Experiment 8 and you begin with 50 g of water at 20 oC and 50 g of water at 80 oC. After adding the two portions of water into your calorimeter setup and following the procedure outlined in the experiment,

  73. Chemistry

    Experiment 1: A has .20 M, B has .20 M and the initial rate is 2.0*10^-4M/min Experiment 2: A has .20 M, B has .40 M, and the initial rate is 8.0*10^-4M/min Experiment 3: A has .40 M, B has .40 M, and the initial rate is 1.6*10^-3M/min Using the data

  74. Physics

    a) When a material is heated, the change in temperature of the material for any given amount of energy is dependent on the material’ s heat capacity. How much energy will water requirements for each 1C increase in temperature? b) On average, 1370 W of

  75. Science

    Describe an experiment to find the specific heat capacity of a material I really don't understand, thanks :)

  76. Chemistry - URGENT

    So, I go to high school in Texas and we have this AP Chem lab due online tomorrow night by midnight and I need some serious help on these questions: Lab Temp 0.2°C Experiment Trial Time in seconds Trial 1 Trial 2 Average Time 1 1 2 256 275 268 2 1 2 215

  77. Chemistry

    So, I go to high school in Texas and we have this AP Chem lab due online tomorrow night by midnight and I need some serious help on these questions: Lab Temp 0.2°C Experiment Trial Time in seconds Trial 1 Trial 2 Average Time 1 1 2 256 275 268 2 1 2 215

  78. Chemistry - reaction kinetics

    So, I go to high school in Texas and we have this AP Chem lab due online tomorrow night by midnight and I need some serious help on these questions: Lab Temp 0.2°C Experiment Trial Time in seconds Trial 1 Trial 2 Average Time 1 1 2 256 275 268 2 1 2 215

  79. biology

    experiment to show that heat is given out during aerobic respiration?material needed,method/procedure,observation and conclusion

  80. Physics

    A heat engine operating between a cold reservoir temperature of 300K and a hot reservoir takes 200J of heat from the hot reservoir and delivers 120J of heat to the cold reservoir in a cycle. The minimum temperature of the hot reservoir is :

  81. science

    A cubic container full of hot water at a temperature of 90 °C is completely lagged with an insulating material of thermal conductivity 6.4x10-4 Wcm-1K-1 (6.4x10-2 Wm-1K-1). The edges of the container are 1.0 m long and the thickness of the lagging is 1.0

  82. Physics

    The recovery time of a hot water heater is the time required to heat all the water in the unit to the desired temperature. Suppose that a 62-gal (1.00 gal = 3.79 x 10-3 m3) unit starts with cold water at 11 °C and delivers hot water at 53 °C. The unit is

  83. Chemistry

    An unknown material absorbs 1,930 J of heat when it changes from 25 °C to 35°C. The sample weighs 500g. What is the specific heat of this material?

  84. Physics/Chem

    an experiment, a 0.280-kg piece of ceramic superconducting material at 23 °C is placed in liquid nitrogen at its boiling point (−195.8 °C) to cool. The nitrogen is in a perfectly insulated flask that allows the gaseous N2 to escape immediately. How

  85. Economics

    A company is conducting a biochemical experiment for the next 12 months. In the first month, the expenses are estimated to be $30,000. As the experiment progresses, the expenses are expected to increase by 5 percent each month. The company plans to pay for

  86. Chemistry

    Using the Isolation method, we are to determine the rate law of the equation, RCOOR' + OH− → RCOO− + R'OH (where R and R' represent organic groups). Initial concentration of experiment 1:[OH−]0 = 0.900 M [RCOOR']0 = 0.0010 M Initial concentration

  87. science

    Consider the following reaction: CH3X + Y --> CH3Y + X At 25ºC, the following two experiments were run, yielding the following data: Experiment 1: [Y]0 = 3.0 M [CH3X] Time (hr) 7.08 x 10-3 M 1.0 4.52 x 10-3 M 1.5 2.23 x 10-3 M 2.3 4.76 x 10-4 M 4.0 8.44 x

  88. Chemistry

    Experiment questions: Experiment 1 results mass of beaker:116.944 g mass of dodecanoic:11.629 g hot water: 175 C warm water: 10 C Average Fressing pt of Dodecanoic = 42.7 Experiment 2 results: Unknown C solution mass: 2.091g Hot water: 175C warm water: 10C

  89. Chemistry

    I need help calculating Heat of fusion for a calorimeter experiment: I know that Q(melt): 8350.46 J, m(ice): 26.39g and m(hot water): 51.93g. Please help me set it up. Hf known is 6.02kj/mol. Answer is in J/g(ice).

  90. chemistry need help

    how to determine the molarity of iron (II) acetate solution? design an experiment. Would it be possible to determine the molarity be immersing a material in it then applying another substance ? confused because there is no way to know liters of solution.

  91. Physics

    Why is a material with a high specific heat capacity better suited for use in a heating system than a material with low heat capacity

  92. Physics

    At a chemical plant where you are an engineer, a tank contains an unknown liquid. You must determine the liquids specific heat capacity. You put 0.500 kg of the liquid into an insulated metal cup of mass 0.200 kg. Initially the liquid and cup are at 20

  93. chemistry

    Determine the specific heat of a material if a 27.3 g sample absorbed 44.2 J as it was heated from 293 K to 336 K.

  94. Science

    PLEASE HELP Science Test Friday Study Guide? I have 1 to 22 already but I am stuck now I have to have this completed and correctly for my study guide. I have a C right now I need an A on this test to bring it up to a B or I stay on restriction please help

  95. Math

    The dissipation of heat through a composite material of width w centimetres can be modelled by the function f(w)=10/w-0.77ln(w)–3.2 You are required to find the width of material that will prevent any heat dissipation. State what equation you will need

  96. Chemistry

    You are handed a well insulated container holding about 100ml of water at a temp between 75 deg C and 100 deg C. you are given a thermometer with a maxmimum temp of 50 deg C. create an experiment to determine the temp of the water. i am really confused on

  97. chemistry

    Determine the specific heat of a material if a 28.4 g sample absorbed 42.9 J as it was heated from 293 K to 336 K. Units are J/g · K.

  98. Physical Science

    Which material would have a higher specific heat: a. a material made of heavier particles b. a material made of lighter particles c. the mass of the particles does not affect specific heat

  99. physics

    an electric hot water heater takes in cold water at 13.0 degrees celsius and delivers hot water. the hot water has a constant temperature of 45 degrees celsius when the "hot" faucet is left open all the times, and the volume flow rate is 5.0 x 10 ^-6

  100. math

    The dissipation of heat through a composite material of width w centimetres can be modelled by the function f(w) = 10/w - 0.77ln(w) – 3.2 You are required to find the width of material that will prevent any heat dissipation. - I understand f(w)= 0, but

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20