
I'm doing the calculations on the lab "Oxidizing Power of Laundry Bleach," and I'm stuck on one part. This is what I have so far: My average volume of sodium thiosulfate is 6.94 ML. I then converted that into moles and got 6.94X10^4 moles. That means that

I'm in 10th grade and we did a titration lab; with every lab we have to answer follow up questions and I'm totally stuck on this one: We did not uses the volume of the water added initially to the Erlenmeyer flask in our calculations. Why? Ok as far as

List the grams of bleach solution necessary to provide 0.931g of NaClO(laundry bleach is 8.25% NaClO by weight) and the mL of bleach solution that contains the necessary amount... NaClO=74.442 g/mol. Need 0.931 grams of NaClO. Density of NaClO solution is

Hi DrBob, Sorry about that, I wasn't very clear! Can someone please help me complete these calculations for my lab; I am having some trouble. A. Standardization of Na2S2O3 Mass of KIO3 in 100mL = 0.09600g Calculate Molarity of KIO3= ? Please check:

Hello, So I have recently done a lab with cobalt(II) nitrate and NaOCl (bleach) and our objective was to determine if colbalt or the bleach is part of the rate determining step. With the lab we have done trials by diluting the colbalt and leaving the


Titration of a Sample of Household bleaches: The oxidizing agent in a household bleach is determined by placing 100 mL of distilled water in a 250 mL Erlenmeyer flask and adding 10 mL of the 10% (w/w) KI solution, swirling the contents of the flask to mix

If 90 mL of laundry bleach containing a 5.0% w/v concentration of sodium hypochlorite is recommended per load of laundry, what mass of sodium hypochlorite is being used per load?

So in lab, I was to oxidize 9fluorenol to 9 fluorenone. The chemicals I used were: 100 mg. of 9fluorenol in 6mL of acetone. 0.25 mL of glacial acetic acid and 1.2 mL of a 5.25% sodium hypochlorite solution. My question is if I attempt to oxidize

What fact does the author use to support her opinion about bleach? (1 point) 1. Bleach is a poison. 2. Bleach is an expensive part of processing water. 3. Bleach isn’t terrific to have around. __________________________________________ Note: This is not

Can someone please help me complete these calculations for my lab; I am having some trouble. A. Standardization of Na2S2O3 Mass of KIO3 in 100mL = 0.09600g Calculate Molarity of KIO3= ? Please check: 0.09600g/(214.0g/mol)=4.486x 10^4 mol 4.486

Sorry to post again but I'm really stuck on this one! I'm doing some post lab questions and I'm stuck on one. In lab we performed Tollens test, Fehlings test, and Jones Oxidation to differentiate our unknown between an aldehyde or a ketone. The question

Calculate [ClO^] in a 6% bleach solution. A 6% bleach solution contains 6 grams of NaClO per 100 grams bleach. The density of 6% bleach is 1.07g/mL.

Calculate [ClO^] in a 6% bleach solution. A 6% bleach solution contains 6 grams of NaClO per 100 grams bleach. The density of 6% bleach is 1.07g/mL.

One brand of laundry bleach is an aqueous solution containing 4.00% sodium hypochlorite (NaOCl) by mass What is the molarity of this solution? (Assume a density of 1.02 g/mL .)

An unidentified compound (A) was reacted with bleach using the same experimental protocol as that performed in the lab. Molecule B was formed. Answering the questions below should allow you to interpret the following information in order to determine the


We did a lab in class on Friday where we stuck a metal loop in various chemicals and stuck it in the flame of a Bunsen burner and we observed the flame's colors as the different metals went in. For every lab we do, we have to write a writeup which involves

I'm doing some post lab questions and I'm stuck on one. In lab we performed Tollens test, Fehlings test, and Jones Oxidation to differentiate our unknown between an aldehyde or a ketone. The question I'm stuck on is " older bottles of benzaldehyde are

Calculate the mass in grams of the undiluted bleach that was in the sample of bleach titrated. Given: Density of undiluted bleach unkown is 1.042 g/mL. 14.44 mL of .100 M Na2S2O3. .0537 grams of NaClO. Each sample should conain 1/5 of the original

The bottle of bleach lists the percentage of sodium hypochlorite as 6.0%. If the density of commercial bleach is 1.084 g/mL, how many mL of .150 M sodium thiosulfate is required to reach the endpoint in a titration if a student analyzed a 2.0 mL sample of

Which is a better bacteria killer? Bleach or hand sanitizer which contains 62% ethyl alcohol. i'm not sure but i think is the hand sanitizer. hand sanitizer ok thanks. What kind of germs? What temperature? In any case, I think bleach would be hard to beat

Gisela finished washing 3/4 of her laundry. She washed 1/3 of this laundry today. Use a rectangle to draw a model to match your expression. What fraction of her laundry did she wash today?

Gisela finished washing 3/4 of her laundry. She washed 1/3 of this laundry today. Use a rectangle to draw a model to match your expression. What fraction of her laundry did she wash today?

Hi, We did an experiment in lab and our professor asked us why we used acetic acid as our oxidizing agent NaOCl + CH3COOH > HOCl + CH3COO Na+ for the above reaction? I'm thinking it has to do with the fact that it is a relatively weak acid and can be

A 10.0 mL volvume of Ultra Bleach is diluted in a volumetric flask. A 25.0 ml sample of this solution is analyzed accordign to the procedure in this experiment. Given that 33.75 mL of 0.135 M Na2S2O3 are needed to reach the stochiometric point, answer the

Please help me with this chemistry question? I am working on a lab report and I am stuck on this question: Use the concept of stoichiometry to explain why balanaced equations are necessary when performing calculations in chemistry. Propose a situation


You wash dishes for a chemistry laboratory to make extra money for laundry. You earn 6 dollars/hr , and each shift lasts 75minutes . Your laundry requires 6quarters/load. How many shifts must you work if you wish to wash 10 loads of laundry?

A solution of household bleach contains 5.25% sodium hypochlorite, NaOCl, by mass. Assuming that the density of bleach is the same as water, calculate the volume of household bleach that should be diluted with water to make 500.0 mL of a pH = 10.23

A solution of household bleach contains 5.25% sodium hypochlorite, NaOCl, by mass. Assuming that the density of bleach is the same as water, calculate the volume of household bleach that should be diluted with water to make 500.0 mL of a pH = 10.10

A solution of household bleach contains 5.25% sodium hypochlorite, NaOCl, by mass. Assuming that the density of bleach is the same as water, calculate the volume of household bleach that should be diluted with water to make 500.0 mL of a pH = 10.23

How many liters of a 2.5% bleach solution must be mixed with a 10% bleach solution to produce 600 ml of a 5% bleach solution?

A solution household bleach contains 5.25% NaClO, by mass. Assuming that the density of bleach is the same as water(1.0g/ml). Calculate the volume of household bleach that should be diluted with water to make 500.0 ml of a ph= 10.26 solution. So, the first

CONCENTRATION OF NaClO IN COMMERCIAL BLEACH. Bleach comes as 6%(mass/volume) solution of NaClO. Calculate the Molarity of NaClO in bleach to three significant figures ( you need molar mass of NaClO)

I work in a pathology lab and need to know what happens when formaldehyde is mixed with chlorine bleach...the chemical formula would be: H2C(OH)2 + NaClO Can anybody out there help me, please?

I'm confused as to what to do for the calculations for my lab. Lab: Semimicroscale crystalizationerylenmyeyerflask and Hirsch Funnel Weigh 0.30g of impure sulfanilamide and then transfer to a 10ml Erlenmeyer flask. To a second Erlenmeyer flask add about

Lab: Creating a Redox Table Purpose: The purpose of this lab exercise is to construct a table of relative strengths of oxidizing and reducing agents. By completing this exercise, you will see how more extensive tables of relative strengths of oxidizing and


I have a lab finished and I have to find the dehydrated sample (show calculations) and the value of n (show calculations). I just need to know how I go about finding these answers using my data?

What is the molarity of a bleach solution containing 6.6 g of NaOCl per liter of bleach? answer please

Household bleach contains (NaClO)2 that decomposes in water, NaClO + h2o = Na+ + OH + Cl2 + O2 If 15ml bleach containing 5.85℅ NaClO is allowed to decomposes completely, then hoe many mL of o2 at 22C and 755mmHg can be liberated. Density of bleach=

Calculate the molarity of the commercial bleach before it was diluted. bleach 6.25%

Calculate the molarity of the commercial bleach before it was diluted. bleach 6.25%

What is the molarity of a bleach solution containing 8.9 g of NaOCl per liter of bleach?

Then calculate the inital ClO^ concencentrations for 1st, 2nd, and 3rd reactions. Calculate [ClO^] in a 6% bleach solution. A 6% bleach solution contains 6 grams of NaClO per 100 grams bleach. The density of 6% bleach is 1.07g/mL. Chemical reaction: Blue

A local laundry advertises that clothes it washes smell "sunshine fresh" because it line dries everything outside. Then a steel factory moves in next door and emits black smoke which stains the clothes drying at the laundry. According to the Coase Theorem,

I did a lab on pressure and depth today. This lab was to simply submerge a plastic tube into a large graduated cynlinder to find the relationship between the two. I found that as the depth increases, so does the pressure. One of the questions I'm stuck on

In the chemical kinetics experiment, determine the dilution of the stock bleach solution. The bleach used will be around 5.5% (weight/volume). Convert this to molarity


why do good oxidizing agents easily reduce? Good (strong) oxidizing agents are easily reduced. What you said I think differs slightly from that. If they are strong oxidizing agents, they easily oxidize other ions and in doing so the oxidizing agent is

In the reaction 2HNO3(aq) + Cu(s) + 2H+(aq) ¨ 2NO2(g) + Cu2+(g) + 2H2O(l) Which of the following statements is correct? A.HNO3 is the reducing agent, and Cu is the oxidizing agent B.HNO3 is the reducing agent, and H+ is the oxidizing agent C.Cu is the

The Johnson family has been very busy and has not done their laundry for several weeks.The dirty laundry pile consists of 540 item of clothing.They figure they can put on average of 27 pieces of clothing in a single load.How many loads of laundry will the

A solution household bleach contains 5.25% NaClO, by mass. Assuming that the density of bleach is the same as water(1.0g/ml). Calculate the volume in mL of household bleach that should be diluted with water to make 500.0 ml of a pH= 9.80 solution. Here's

Question about titration calculations in analysis of antacids lab. We did a lab yesterday with antacids, HCl and NaOH and I'm having trouble doing the calculations. The information known is the following: 1)0.10M NaOH 2)0.10M HCl 3)Mass of Antacid .22g

Could you please check the following for any possible errors? semicolons, commas, two separate sentences, etc? A new and exciting change is about to premiere for all Peachtree Professional Park personnel. Beginning June 1, 2013, the following dress code

Using household bleach and saltwater of the same molarity, describe the quantities of each that would me needed to make 30 ml of a solution that contained 50% of the hypochlorite in household bleach.

Knowing that bleach contatins 5% aqueous sodium hypocholirte, how much sodium hypochlorite does 700ml of 10% bleach contain? (in grams)

Household bleach is 5.25% NaOCl by mass. Assume a density of 1.00g/ml. What is the pH of bleach? Hint: assume 100 ml. Answer: 10.7. How does one approach this question? Kati

Q. The Johnson family has been very busy and has not done there laundry for several weeks. The dirty laundry pile consists 540 items of clothing. They figure they can put average of 27 pieces of clothing in a single load. How many loads if laundry will the


a metal power/laundry line which hang droop on a very warm day

Explain a metal power/laundry line which hang droop on a very warm day

Are there any websites with other students' lab reports with calculations online? I do not want to copy and am completely against plagiarism. I just want to look at others' examples to help in giving me ideas on how to write my own and make sure I have

Household bleach is 5.25% NaOCl. What mass of NaOCl would be found in a .5 kg sample of bleach?

In the following half equation, which is the oxidizing agent? NO3–(aq) + 4H+(aq) + 3e– <> NO(g) + 2H2O a. NO3– b. H+ c. e– d. NO e. H2O An oxidizing agent is a chemical compound that readily transfers oxygen atoms, or is a substance that

Can someone help me with the formula of horsepower? In my lesson, it shows me how power = ft*lb/s... but then it kinda stops and doesn't tell me how to find hp from this. I tried searching online but I'm still confused. There's something about watts and

I have a question related to oxidizing agents. Why do some oxidizing agents have to be in acid medium? For example the potassium permanganate. I would also like to know if there are other examples of oxidizing agents that have to be in acid medium or where

Why did you need to know the density of the bleach solution? Why didn't you measure the density of h2o2 solution as well? Stoichiometry lab problem

This was the previous one Substances A, B, and C can all act as oxidizing agents. In solution, A is green, B is yellow, and C is red. In the reactions in which they participate, they are reduced to A, B, and C ions, all of which are colorless.

Mark uses 27 J of work to carry the laundry basket with a force of 17 N. What is the distance he carried the laundry basket?


Ruth's brother just went away to college this fall and had to buy his own laundry soap and fabric softener.The laundry soap was twice the cost of the fabric softener. the total of the two items was $7.47. how much did the laundry soap and the fabric

Hi everyone! I just got a new lab that I MUST complete today, and it's about titration I have absolutely no clue how to do it, it just doesn't make sense to me! I hope that someone can help explain to me how to do it so I can finish ASAP!! Thanks a lot,

Regularstrength chlorine bleach is a 5.25% solution of NaClO. how many milliliters of 0.02005 M sodium thiosulfate will be required to reach the equivalence point in the titration of a 1.000ml sample of Bleach by reacting the ClO ions with I, then

There are many tooth whitening products on the market from what I've seen. And also available in treatments from the dentist as my aunt is a dentist so I know. But I don't know why I haven't thought of this from day 1. I saw an ad recently for Listerine

A certain computer can perform 10 to the 5th power calculations per second. How many calculations can it perform in 10 seconds?

Assuming the following reaction proceeds in the forward direction, 3 Sn4+(aq) + 2 Cr(s) 3 Sn2+(aq) + 2 Cr3+(aq) a. Sn4+(aq) is the reducing agent and Cr(s) is the oxidizing agent. b. Cr(s) is the reducing agent and Sn2+(aq) is the oxidizing agent.

Please double check one last time have to hand it in tomorrow.ThankYou in Advance. This was the lab experiment:  A. Standardization of the Sodium Thiosulfate Solution Make up a standard solution of potassium

Any help would be greatly appreciated! Substances A, B, and C can all act as oxidizing agents. In solution, A is green, B is yellow, and C is red. In the reactions in which they participate, they are reduced to A, B, and C ions, all of which are

a business lady leaves her laundry every Monday, then picks it up the next monday as she drops off more. If she wears a clean blouse every day of the week, how many blouses must she have, in order to visit the laundry only on Mondays?

Number of moles of oxygen gas produced from the complete catalyzed decomposition of 6.80ml sample of a 3.5% solution. Density of the 3.5% solution of H2O2 is 1.01g/ml Let's find out what you know about this and work from there. Show your calculations to


2.) Substances A, B, and C can all act as oxidizing agents. In solution, A is green, B is red, and C is yellow. In the reactions in which they participate, they are reduced to A, B, and C ions respectively, all of which are colorless. When a solution of

2.) Substances A, B, and C can all act as oxidizing agents. In solution, A is green, B is red, and C is yellow. In the reactions in which they participate, they are reduced to A, B, and C ions respectively, all of which are colorless. When a solution of

If you are using 5.25% (mass/mass) bleach solution and you determine that the density of the bleach solution is 1.08 g/mL, how many moles of sodium hypochlorite are present in a 4.00 mL sample?

If you are using 5.25% (mass/mass) bleach solution and you determine that the density of the bleach solution is 1.08 g/mL, how many moles of sodium hypochlorite are present in a 4.00 mL sample?

I'm stuck on this thing in science. It's a lab report so its kinda hard to explain. We did a topographic map experiment. We had a big rock, and put it in a plastic bin. We then marked centimeters on the bin and filled water to the first centimeter. We drew

In a stair case power lab, if you have the height of the steps, the time and the mass, how do you find the force and the power?

Express each power as an equivalent radical. K. I don't know how to write this, but I'll explain. There is a fraction. 1 over 9. And 9 has a power up to it which is 5 and a power down which is 3. I don't get how to express this power as an equivalent

a bathroom cleaner contains 1 part of bleach with 4 parts of water. if you need 10 parts of bathroom cleaner, how much water and bleach do you need? If 1 part bleach and 4 parts water = 5 parts, then what do you need to do to get 10 parts? Although this

I just read my syllabus for lab and I am kind of shocked at what it says. I do know that I have to write out procedures of the lab in my nbk before coming to lab but I just read that it says "You will NOT be allowed to refer to you textbook/handout during

During a “perm”, disulfide bonds can be broken and reformed using which treatments, respectively? I think the answer is a. but can someone confirm this? a. an oxidizing agent followed by a reducing agent b. a reducing agent followed by the use of water


Suppose a student diluted and titrated a bleach unknown. A single titration was performed which required 14.42 mL of 0.100 M Na2S2O3. The density of the original, undiluted bleach unknown was 1.042 g/mL. calculate the number of moles of ClO in the sample

Express each power as an equivalent radical. K. I don't know how to write this, but I'll explain. There is a fraction. 1 over 9. And 9 has a power up to it which is 5 and a power down which is 3. I don't get how to express this power as an equivalent

I really need help with my science lab. I was sick when we did the lab on Thursday and Friday was a snowday so I did not get to get the observations off my peers. My teacher has allowed people one more day and I do not understand this Lab at all. If

1. When the hydrochloric acid is added to the calcium carbonate, will there be an excess of HCl(aq) or CaCO3(aq) or will there be stoichiometric equivalents of the two? Show your calculations. 2. In this lab, you will use a 50mL buret and ~0.3M NaOH (aq).

Hi guys, so we recently did a lab where we put a strip of Magnesium Carbonate in a crucible with a lid on, weighed it and then put it over a bunsen burner for a while to let it oxidise. After that, we weighed it again. Here are my results: Crucible + Lid

We did not use the volume of the water added initially to the Erlenmeyer in our calculations. Why?

how can i determine via infrared spectrum whether the alcohol that was oxidized was primary or secondary? i did a lab experiment in which we oxidized a diol with bleach and i need to figure out which OH group was oxidized into a C=O. What are the signs of

Ok so we had a mass determinations lab in chemistry. We were supposed to use both a triple beam balance scale and an electronic scale to precision. We first weigh our beaker on both scales (i did it on the electronic first), then record the weight. Then we

Can someone please help me on this two Chemistry questions...they are from my lab....the lab was on Acids and Bases using Red Cabbage Indicator. Q1 How consistent was the cabbage juice indicator for this lab? Discuss the limitations of using red cabbage

If you had walked into the lab, only to discover that you only had 0.1 M sulfuric acid available to run your tests, how might this have affected your calculations? Why?


Rank these species by their ability to act as an oxidizing agent. Na^+ I2 Cr^3+ F2 Put best oxidizing agent first and continue to have best reducing agent last.

This Is the last one I'm stuck on, I promise, I'm caught between c and d, I think... C right? Because Even If solar power Isn't available at night, Or when It's cloudy, there are ways of storing the energy you get, Right? Which of the following is a

A grocery store shelf can hold 4 large boxes of laundry detergent. The store clerk put 25 boxes of laundry on the shelves. What is the least number of shelves needed for the display.

Spanish power grows Im only stuck on this quesion, How were charles V and Philip ii alike and different in their goals of ensuring absolute power and strengthening catholisism?

Reaction 1: Cu (strongest reducing agent) I Ag Br (weakest reducing agent) Reaction 2: Zn(strongestreducing agent) Pb Cu Ag(weakest reducing agent) Reaction 3: Cl2 (strongest oxidizing agent) Br2 I2 (wekest oxidizing agent) Using these results, how am I