# For the reaction H2(g) + I2(g) ↔ 2 HI(g), you have the initial concentrations [H2] = 0.15 and [I2] = 0.05. Keq for the reaction at this temperature is 4.5 x 10-6. Make a reaction table. Include rows for initial

23,271 results, page 4
1. ## chemistry

at 327 degrees C, the equilibrium concentrations are [CH3OH]=0.15M, [CO]=0.24M, and [H2]=1.1M for the reaction: CH3OH(g)CO(g)+2H2(g) Calculate Kp at this temperature

asked by erica on February 16, 2011
2. ## Biochemistry

The malate dehydrogenase reaction, written in the direction as it occurs in the citric acid cycle is: malate + NAD+ → oxaloacetate + NADH + H+ ΔG˚' = +7.1 kcal/mol Calculate the Keq and ΔG (in kcal/mol) for this reaction at the physiologic

asked by Jenna on November 5, 2011
3. ## Chemistry help please!!!

Experimental Procedure, Part F. A 1.0- mL volume of 0.010 M H2SO3 is added to a mixture of 12 drops of 0.01 M HIO3, 8 drops of deionized water, and 1 drop of starch solution. A color change in the reaction mixture occured in 40 seconds. a. Assuming 25

asked by john on January 27, 2011
4. ## AP CHEM!

IM SO CONFUSED PLEASE HELP! H2 +CO2-->H2O + CO When H2 is mixed with CO2 at 2,000K, equilibrium is achieved according to the equation above. In one experiment, the following equilibrium concentrations were measured. [H2]= 0.20mol/L [CO2]= 0.30mol/L

asked by linds on April 3, 2007
5. ## chemistry

In a reaction involving the iodination of acetone, the following volumes were used to make up the reaction mixture: 10 mL 5.0 M acetone + 10 mL 1.5 M HCl + 10 mL 0.005 M I2 + 20 mL H2O A student found that it took 400 seconds for the color of the I2 to

asked by leticia on March 5, 2015
6. ## Chemistry

When 0.13 g of H2 and 0.18 g of I2 are confined to a 150. mL reaction vessel and heated to 700. K, they react by a second-order process (first order in each reactant), with k = 0.063 L·mol-1s-1 in the rate law (for the rate of formation of HI). (a) What

asked by Sara on June 28, 2013
7. ## chemistry

If 1.00 mol of iodine and 0.50 mol of chlorine are initially placed into a 2.00 L reaction vessel at 25 degrees celsius, find the concentrations of all entities at equilibrium

asked by Kelsy on April 7, 2008
8. ## science

Calculate the pH of a solution created by mixing 200.0 mL of 0.400 M acetic acid and 200.0 mL of 1.00 M sodium acetate. Hint: The instant the two solutions are mixed what are the initial concentrations of each?

asked by Bruce on February 14, 2011
9. ## chemistry

What are the concentrations of [H+] and [OH-] in each of the following. Determine the pH and pOH for each solution. A. 1.25 M HCl B. 0.25 M NaOH C. 0.035 M Ca(OH)2 D. 0.50 M HNO3 I know how to do the pH and pOH I just do not know how to figure out the both

asked by Anna on April 28, 2010
10. ## chemistry

Gaseous CO2 decomposes to form the gaes CO and O2. At 20.0 degrees Celsius, =2.0*10^-8. 2.0 mol carbon dioxide is placed in a 5.0 L flask. What are the equilibrium concentrations of each species. My attempt to get the answer: Balanced equation: 2CO2-->

asked by Anonymous on March 1, 2009
11. ## CHEMISTRY

Method for getting correct answer? Thank you! Initially there were equilibrium concentrations of 0.1887 M A, 0.1042 M B. Which of the equations below is correct if the pressure decreased by a factor of 2.40? Use the reaction below. 6A(g) ↔ 5 B(g) Qc =

asked by Chemistry on April 6, 2014
12. ## CHEMISTRY

Method for getting correct answer? Thank you! Initially there were equilibrium concentrations of 0.1887 M A, 0.1042 M B. Which of the equations below is correct if the pressure decreased by a factor of 2.40? Use the reaction below. 6A(g) ↔ 5 B(g) a. Qc =

asked by Chemistry on April 6, 2014
13. ## chemistry(please check)

Just made it a new post didn't what it to get overcrowning.I hope this will help us figure out now For questions #1 through #10, refer to the following equilibrium system, with a Kc of 1.23E-03: C3H6O (aq) + 2C2H6O(aq)----> C7H16O2 (aq) + 2H2O (l) 1. What

asked by cateye on April 23, 2012
14. ## Chemistry

A chemical reaction occurring in a cylinder equipped with a movable piston produces 0.58 mol of a gaseous product. If the cylinder contained 0.11 mol of gas before the reaction and had an initial volume of 2.1 L, what was it's volume after the reaction. Am

asked by Monique on October 14, 2011
15. ## Arrhenius Reaction

The activation energy of a certain reaction is 32.9 kJ/mol At 25 degrees C the rate constant is 0.0160 units s-1 units. At what temperature in degrees Celsius would this reaction go twice as fast? Given that the initial rate constant is 0.0160 s-1 at an

asked by Amy on January 30, 2013
16. ## chem

a) Silver iodide(s) is formed by the following reaction: Ag (aq) + I (aq) --> AgI (s) The Ksp for AgI = 1.8 x 10^-10 Describe, using the chemical reaction, the mathematical formula for these ions. Assuming these ion concentrations are equal, what would the

asked by hank on November 2, 2015
17. ## cheMistry

a) Silver iodide(s) is formed by the following reaction: Ag (aq) + I (aq) --> AgI (s) The Ksp for AgI = 1.8 x 10^-10 Describe, using the chemical reaction, the mathematical formula for these ions. Assuming these ion concentrations are equal, what would the

asked by hank on November 1, 2015
18. ## chemistry

Suppose that the reaction of Fe3+ and SCN- produces Fe(SCN)2 (+). 5.00mL of 2.0mM Fe3+ is mixed with 5.00 mL of 2.0mM SCN-. The student finds the equilibrium concentrations of Fe(SCN)2(+) to be 0.3mM. 1.) What is the initial number of moles of each species

asked by paula on February 23, 2015
19. ## Chemistry

Currently studying for an lab exam. Just have a few question about a typical Iodine Clock reaction lab. In an typical Iodine Clock reaction lab what would be the state of effect of an increase in the initial concentration of thiosulfate ion (S2O3 2-) and

asked by AhmadM on February 15, 2013
20. ## CHEM

When 0.5 mole of CO2 and 0.5 mole of H2 were forced into a litre reaction container, and equilibrium was established: CO2(g) + H2(g) H2O (g) + CO (g) Under the conditions of the experiment, K=2.00 a) Find the equilibrium concentration of each reactant and

asked by Anonymous on April 10, 2012
21. ## science

passive transport involves movement of substances...... A) from areas of lower concentration areas of higher concentrations. B)from areas of higher concentrations to areas of lower concentration C) from areas which the concentration has reached a balance

asked by KK on January 26, 2015
22. ## chemistry

I2(g)+Cl2(g)->

asked by jennifer on June 7, 2015
23. ## chemistry

A 0.239 mol sample of PCl5(g) is injected into an empty 2.85 L reaction vessel held at 250 °C. Calculate the concentrations of PCl5(g) and PCl3(g) at equilibrium.

asked by layla on May 3, 2015
24. ## chemistry

A dilution is made during the preparation of a reaction mixture. The compounds are: 2.00 ml of 0.325 KMnO4, 7.50 ml of 0.155 M Oxalic acid, and 10.00 ml of H2O. What are the final concentrations of the compounds?

asked by Yubellkis on February 4, 2017
25. ## Chemistry

The reaction OH- + NH4+ = H20 + NH3 is kinetically first order in both reactants' concentrations. The rate constant is 2e10 1/M s. If 50 ml of .01 M NaOH is mixed with 50 ml of .01 M NH4CL, find the time required for the OH- concentration to reach 1e-4 M.

asked by Anonymous on March 19, 2014
26. ## Chemistry Equilibrium

At 500 ºC, the decomposition of water into hydrogen and oxygen, 2H2O(g) 2H2(g) + O2(g) has Kc = 6.0 × 10-28. What are the concentrations of H2 and O2 that are present at equilibrium in a 2.00 L reaction vessel at this temperature if the container

asked by Anonymous on April 10, 2014
27. ## Chemistry

Consider the decomposition reaction: AB(g)-->A(g)+B(g). The rate law for the reaction is: rate=k[AB]^2, where k=0.00846 M^-1 min^-1. After 5.25 hours, what is the percent of AB that decomposed if the initial concentration is 2.00 M?

asked by Ceamus Angelina on June 28, 2018
28. ## chem

If it takes 84.2 min for the concentration of a reactant to drop to 20.0% of its initial value in a first-order reaction, what is the rate constant for the reaction in the units min-1?

asked by ted on April 14, 2013
29. ## Chemistry

A voltaic cell consists of Ag/Ag+2 electrode E= 0.80 and a Fe+2/Fe+3 electrode E=0.77 with the following initial molar concentrations: [Fe+2}= 0.30 M [Fe+3]= 0.10 M [Ag+]=0.30 M. What is the equilibrium concentration of Fe+3? (Assume the anode and the

asked by Jackie on July 20, 2012
30. ## CHEMISTRY

The extracellular concentrations of Na+ and K+ are 135mM and 6mM, respectively. The intracellular concentrations of Na+ and K+ are 10mM and 105mM, respectively. The membrane potential is 75mV. For Na+/K+ ATPase, 3Na+ are exported and 2K+ are imported.

asked by Izabella on September 26, 2013
31. ## Chemistry

The extracellular concentrations of Na+ and K+ are 135mM and 6mM, respectively. The intracellular concentrations of Na+ and K+ are 10mM and 105mM, respectively. The membrane potential is 75mV. For Na+/K+ ATPase, 3Na+ are exported and 2K+ are imported.

asked by Drew on September 29, 2013
32. ## Chemistry

The extracellular concentrations of Na+ and K+ are 135mM and 6mM, respectively. The intracellular concentrations of Na+ and K+ are 10mM and 105mM, respectively. The membrane potential is 75mV. For Na+/K+ ATPase, 3Na+ are exported and 2K+ are imported.

asked by Kam on September 29, 2013
33. ## Chemistry

Estimate the rate of the reaction, H2SeO3 + 6I- + 4H+ Se + 2I3- + 3H2O given that the rate law for the reaction at 0°C is rate = (5.0 × 10^5 L5mol-5s-1)[H2SeO3][I-]^3[H+]^2 The reactant concentrations are [H2SeO3] = 1.5 × 10^-2 M, [I-] = 2.4 × 10^-3 M,

asked by Is my answer right? on February 1, 2015
34. ## Chemistry

Consider the reaction A ==> B. If the reaction is first-order in A with the initial concentration A being 6.048M, what is the concentration of A after 1.986 seconds if the rate constant is 0.483s-1? Error tolerance: ±0.5% Can someone explain how to do

asked by Marisol on February 6, 2007
35. ## Gen Chem

Consider the following reaction, A B in a 1.00L container. At 1.77°C, the molar concentrations of A and B, respectively, 5.838M and 3.945M. Suddenly, 8.744 moles of A are added to the system. What is the change in DG of the system. Give the answer in kJ?

asked by Sarah H on March 28, 2008
36. ## chemistry

A 0.411 mol sample of PCl5(g) is injected into an empty 4.65 L reaction vessel held at 250 °C. Calculate the concentrations of PCl5(g) and PCl3(g) at equilibrium.kc=1.80 at 250c

asked by muna on November 10, 2013
37. ## Gen Chem

Consider the following reaction, A B in a 1.00L container. At 1.77°C, the molar concentrations of A and B, respectively, 5.838M and 3.945M. Suddenly, 8.744 moles of A are added to the system. What is the change in DG of the system? Give the answer in kJ?

asked by Sarah H on March 28, 2008
38. ## chemistry

1. A three-step mechanism has been suggested for the formation of carbonyl chloride: Step 1: Cl2 ===> 2 Cl (fast equlibrium) Step 2: Cl + CO ===> COCl (fast equilibrium) Step 3: COCl + Cl2 ===> COCl2 + Cl (slow) What is the molecularity of the

asked by Issac on February 9, 2007
39. ## Chemistry

The rate of a first-order reaction is followed by spectroscopy, monitoring the absorption of a colored reactant at 520 nm . The reaction occurs in a 1.29-cm sample cell, and the only colored species in the reaction has an extinction coefficient of 5700

asked by Leslie on January 26, 2013
40. ## Chemistry

The rate of a first-order reaction is followed by spectroscopy, monitoring the absorption of a colored reactant at 520 nm . The reaction occurs in a 1.29-cm sample cell, and the only colored species in the reaction has an extinction coefficient of 5700

asked by Leslie on January 26, 2013
41. ## chemistry--last time i promise

CO(g) + H2O(g)-->CO2 + H2 (g) reaction occurs in a 2.0 Ll reactor at 800 degrees celsius. The reaction conditions are such that a complete conversion of reactants into products results. The reactor is charged initially with 5.0 atm of CO and 8.0 atm of

asked by alexis on May 3, 2015
42. ## Chemistry

If the initial rate of reaction is observed to increase by a factor of nine when the concentration of a reactant is tripled, what is the order of reaction with respect to that reactant? a)0 b)1 c)2 d)3 e)5 I think it's c am i right? Explain in case i'm

asked by Sarah on July 25, 2010
43. ## science/ chemistry

Over 80 000 vehicles per day pass the site and the traffic is frequently congested. The surrounding area is described as forming a street canyon. The temperature at the site had reached 25 °C by 08:00, when the ethane concentration was recorded as 7.09

asked by Nicolas on September 14, 2008
44. ## AP Chemistry

Consider the following reaction. CaSO4(s) Ca2+(aq) + SO42-(aq) At 25°C the equilibrium constant is Kc = 2.4 10-5 for this reaction. (a) If excess CaSO4(s) is mixed with water at 25°C to produce a saturated solution of CaSO4, what are the equilibrium

asked by Olivia on October 20, 2012
45. ## Chemistry

Calculate the concentrations of S2O8 2-, I-, S2O32 2- in moles per litre of reaction mixture given the following: 20mL of 0.1 M (NH4)2S2O8 added to: 20mL of 0.2M KI 10mL of 0.01M Na2S2O3 5mL 0.2% starch Also, calculate -(delta)S2O8 2- that is, how much

asked by Rachel on January 24, 2011
46. ## CHEMISTRY

A second-order reaction has a rate constant of 1.65 M–1 s–1. If the initial reactant concentration is 1.0 M, calculate the time (in seconds) required for the reaction to become 90% complete. i got 0.06734 seconds but that's incorrect i have no idea

asked by Maya on March 28, 2012
47. ## Chemistry

At 25°C, K = 0.090 for the following reaction. H2O(g) + Cl2O(g) equilibrium reaction arrow 2 HOCl(g) Calculate the concentrations of all species at equilibrium for the following case. 1.3 mol pure HOCl is placed in a 1.6 L flask [HOCl]________

asked by Ann on February 27, 2012
48. ## chemistry

Calculate each of these equilibrium concentrations based on the reaction below. 2 NO(g) + O2(g) 2 NO2(g) K = 1.71 1012 (a) [NO] = 0.0048 M; [O2] = 0.000057 M; [NO2] = ? (b) [NO] = 0.0026 M; [O2] = 0.000023 M; [NO2] = ?

asked by Anonymous on September 12, 2011
49. ## chemistry

Calculate each of these equilibrium concentrations based on the reaction below. 2 NO(g) + O2(g) 2 NO2(g) K = 1.71 1012 (a) [NO] = 0.0048 M; [O2] = 0.000057 M; [NO2] = ? (b) [NO] = 0.0026 M; [O2] = 0.000023 M; [NO2] = ?

asked by Anonymous on September 12, 2011
50. ## ap chemistry

At 350 K, Kc = 0.142 for the reaction 2BrCl(g) *) Br2(g) + Cl2(g) An equilibrium mixture at this temperature contains equal concentrations of bromine and chlorine, 0.069 mol/L. What is the equilib- rium concentration of BrCl? Answer in units of M

asked by cheri on January 28, 2013
51. ## ap chem

At 350 K, Kc = 0.142 for the reaction 2BrCl(g) *) Br2(g) + Cl2(g) An equilibrium mixture at this temperature contains equal concentrations of bromine and chlorine, 0.067 mol/L. What is the equilib- rium concentration of BrCl? Answer in units of M.

asked by Anonymous on February 13, 2011
52. ## AP Chem

At a particular temperature, K = 1.00 102 for the following reaction. H2(g) + I2(g) 2 HI(g) In an experiment, 1.23 mol H2, 1.23 mol I2, and 1.23 mol HI are introduced into a 1.00 L container. Calculate the concentrations of all species when equilibrium is

asked by Bill on January 8, 2012
53. ## Chemistry

When 442 mg of NO2 is confined to a 150. mL reaction vessel and heated to 300°C, it decomposes by a second-order process. In the rate law for the decomposition of NO2, k = 0.54 1/(M·s). A) what is the initial reaction rate? B) what is the reaction rate

asked by Val on March 31, 2010
54. ## chemistry

At 35°C, Kc = 1.6 X 10-5 M for the reaction 2NOCI(g) 2NO(g) + Cl2 (g)' Calculate the concentrations of all species at equilibrium for each of the following systems. Note any simplifying assumptions made in the calculations. 3.0 mol NO(g) and 1.0 mol

asked by airman on December 6, 2014
55. ## Chemistry

Nitrogen Monoxide reacts with hydrogen gas to form nitrogen gas and water (vapor). (i). write a balanced equation for this reaction. (ii). The reaction is experimentally found to be (approx) first-order in H2 and second order in in NO. Write the form if

asked by Crystal on April 14, 2012
56. ## Biochem

Glycerol 3-phosphate dehydrogenase catalyzes the reversible reaction: G3P + NAD+ --> NADH + H+ + DHAP If in the cell, the concentrations of G3P, NAD+, NADH, and DHAP are 2 mM, 4 mM, 6 mM, and 8 mM respectively. Determine if the reaction spontaneous as

asked by Mia S on December 8, 2015
57. ## Chemistry

A 5.80 g sample of SiH4 and an excess of oxygen were placed in a reaction container surrounded by 3.40 kg of water. The initial temperature of the water was 14.10°C. At the end of the reaction, the temperature of the water was 48.90°C. Assume the heat

asked by Megan on March 8, 2010
58. ## College Chemistry

Consider the following reaction, equilibrium concentrations, and equilibrium constant at a particular temperature. Determine the equilibrium concentration of SO2(g). 2SO2(g)+O2(g)=2SO3(g) Kc=1.7*10^8 [SO3]aq=0.0034 M [O2]aq=0.0018 M

asked by Timothy urgent need on December 10, 2013
59. ## Chemistry

Consider the following reaction, equilibrium concentrations, and equilibrium constant at a particular temperature. Determine the equilibrium concentration of SO2(g). 2SO2(g)+O2(g)=2SO3(g) Kc=1.7*10^8 [SO3]aq=0.0034 M [O2]aq=0.0018 M

asked by Timothy urgent need on December 10, 2013
60. ## Chemistry

2 Al(s) + 3 Cl2(g) → 2 AlCl3(s) Into a cylinder with a moveable piston (pressure stays constant), a piece of aluminum is placed and chlorine gas is added. After they react, the temperature inside the piston is considerable higher than its initial

asked by tatyana on October 14, 2017
61. ## Chemistry

2 ml of 1M HCl 0 ml of H2O 3ml of .3M Na2S2O3 How do I find the initial and final concentrations of both HCl and Na2S2O3?

asked by Nicole on January 7, 2013
62. ## Chem

Calculate ΔGo (in J) for 1 moles of electron(s) in each half-reaction and a standard potential of 0.34 V. I got .86 Calculate Keq for 2 moles of electron(s) in each half-reaction and a standard potential of (-0.44) V. I got -.36 Calculate the potential

asked by Anonymous on April 10, 2013
63. ## college

1) You are given solutions of HCl and NaOH and must determine their concentrations. You use 37.0mL of NaOH to titrate 100mL of HCl and 13.6 mL of NaOH to titrate 50.0mL of 0.0782 M H2SO4. Find the unknown concentrations. Molarity of NaOH and molarity of

asked by Ashley on October 4, 2010
64. ## Chemistry

1) You are given solutions of HCl and NaOH and must determine their concentrations. You use 37.0mL of NaOH to titrate 100mL of HCl and 13.6 mL of NaOH to titrate 50.0mL of 0.0782 M H2SO4. Find the unknown concentrations. Molarity of NaOH and molarity of

asked by Ashley on October 4, 2010
65. ## chemistry

For the reaction 2A(g) + B(aq) + 3C(l) D(s) + 3E(g), the concentrations at equilibrium are found to be: A: 2.3x10^3 Pa B: 1.8x10^-2 M C: 15.8M D: 12.5M E: 5.6x10^4 Torr Find the numerical value of the equilibrium constant that would appear in a

asked by Ashley on March 10, 2013
66. ## Physics

To stop a car, you require first a certain reaction time to begin braking. Then the car slows under the constant braking deceleration. Suppose that the total distance moved by your car during these two phases is 56.7 m when its initial speed is 80.0 km/h,

asked by Bob on October 3, 2010
67. ## chemistry (DrBob222)

Calculate the value of Ecell for the reaction of cobalt(II) chloride and zinc metal, given the specific concentrations listed. Zn(s) | Zn2+(0.21 M) || Co2+ (0.21 M) | Co(s) Okay, so I keep getting -1.04 and -1.06 when I do this problem. I have used log

asked by Anonymous on November 21, 2011
68. ## chemistry (DrBob222)

Calculate the value of Ecell for the reaction of cobalt(II) chloride and zinc metal, given the specific concentrations listed. Zn(s) | Zn2+(0.21 M) || Co2+ (0.21 M) | Co(s) Okay, so I keep getting -1.04 and -1.06 when I do this problem. I have used log

asked by Anonymous on November 21, 2011
69. ## Chemistry

Consider the titration of 50mL of 2.0M HNO3 with 1.0M KOH. At eah step, add the following: 0ml, 25ml, 50ml. a) Write a reaction to show the initial reaction b)ICE table c) determine the spectators present after d)Calculate the pH

asked by Gub on April 6, 2016
70. ## Chemistry

Write a procedure to demonstrate the effect of higher concentrations of HCl on its rate of reaction with antacid tablets. I have HCl with a concentration of 1.0 mol/L. This is what I have so far. Are my concentrations correct for this procedure? E is my

asked by Carolyn on May 22, 2013
71. ## Chemistry

In a reaction in which A + B yields AB, the reaction is referred to as a _________. A. decomposition reaction B. double-replacement reaction C. combustion reaction D. composition reaction

asked by Jason on September 17, 2010
72. ## Chemistry...HELP!!!!

In a reaction in which A + B yields AB, the reaction is referred to as a _________. A. decomposition reaction B. double-replacement reaction C. combustion reaction D. composition reaction i think is a

asked by Jason on September 17, 2010
73. ## Organic Chemistry

The Diels-Alder reaction is classified as a: A. polar reaction B. radical reaction C. substitution reaction D. pericyclic reaction E. rearrangement reaction

asked by nilee on March 6, 2009
74. ## Chemistry

At a given temperature, a first-order reaction has a rate constant of 3.5 ´ 10–3 s–1. How long will it take for the reaction to be 24% complete? A chemical reaction that is first-order in X is observed to have a rate constant of 2.20 ´ 10–2 s–1.

asked by Juli on November 17, 2014
75. ## Gen Chemistry

Determine the concentrations of MgCl2 Mg2+ and Cl- in a solution prepared by dissolving 2.73*10^-4g MgCl2 in 1.00L of water. Express all the concentrations in molarity. Additionally, express the concentrations of the ionic species in ppm. MgCl2= ____ M

asked by Juan on October 31, 2018
76. ## chem 12

consider the following equilibrium 2NOCl(g)--- 2 NO(g) + Cl2(g) Initally 1.00 mol of NO and 1.00 mol of Cl2 are placed in a 5.00L container. Calculate the initial concentrations of NOCl, NO and Cl2 NO= 0.20 mol/L Cl2= 0.20 mol/l NOCl=0 At equilibrium it is

asked by George on March 8, 2016
77. ## AP Chemistry

At 350 K, Kc= 0.142 for the reaction 2BrCl(g) Br2(g) + Cl2(g) An equilibrium mixture at this temperature contains equal concentrations of bromine and chlorine, 0.049 mol/L. What is the equilibrium concentration of BrCl? Answer in units of M

asked by Gabriella on November 27, 2013
78. ## science

pftba is found in extremely low concentrations (0.18 parts per trillion) but it has a great impact on climate. if pftba concentrations increase, predict what will happen to the climate

asked by sam on November 11, 2015
79. ## science

Perfluorotributylamine (PFTBA) is found in extremely low concentrations (0.18 parts per trillion) but it has a great impact on climate. If Pftba concentrations increase, predict what will happen to the climate. Please help?

asked by sam on November 12, 2015
80. ## CHEMISTRY

The data below has been taken for the reaction of a dye with the hydroxide ion. The reaction was performed at two different hydroxide ion concentrations while the dye concentration was kept constant. What is the rate law? [OH─] = 0.10 M [OH─] = 0.20 M

asked by Aparna on March 18, 2014
81. ## Chemistry Question

The reaction of quicklime (CaO) with sulfur dioxide (SO2) is an important reaction for reducing SO2 emissions from coal-fired power plants: CaO(s) + SO2(g) → CaSO3(s) This reaction is an example of: A. a precipitation reaction B. an electrolysis reaction

asked by M on March 29, 2012
82. ## Chemistry

The equilibrium constant, Keq, is defined as the ratio of the concentrations of products to reactants. What is the equilibrium constant for the following reaction: ClNO2 (g) + NO (g) ↔ NO2 (g) + ClNO (g)

asked by Tamera on November 11, 2014
83. ## Science

The decomposition reaction for PCl5 for which the equilibrium constant is 0.030. If you begin an experiment with 0.040M PCl5. What are the expected equilibrium concentrations of all species.

asked by Kathy on November 1, 2018
84. ## Chemistry

At a particular temperature, K = 2.0 10-6 mol/L for the following reaction. 2 CO2(g) 2 CO(g) + O2(g) If 1.8 mol CO2 is initially placed into a 5.9-L vessel, calculate the equilibrium concentrations of all species.

asked by Elizabeth on February 20, 2012
85. ## chemistry

Heterogenous equilibrium of ammonium bisulfide. Ammonium bisulfide NH4HS forms ammonia NH3 and hydrogen sulfide H2S through the reaction NH4HS(s) arrows + H2S(g). This reaction has a kp value of 0.120 at 25 C. A 5.0-L flask is charged with .400g of pure

asked by gin on March 12, 2011
86. ## Chemistry

What are the concentrations of Cu^2+, NH3, and Cu(NO3)4^2+ at equilibrium when 18.8 g of Cu(NO3)2 is added to 1.0 L of a .400 M solution of aqueous ammonia? Assume that the reaction goes to completion and forms Cu(NH3)4^2+.

asked by Jamila on March 17, 2015
87. ## chemistry

The half-life of a reaction was found to be inversely dependent on the concentration of the starting material. Thus, we can say that a. the reaction is zero order b. the reaction is first order c. the reaction is second order d. the reaction starts out

asked by elvis on February 18, 2012
88. ## chemistry

The half-life of a reaction was found to be inversely dependent on the concentration of the starting material. Thus, we can say that a. the reaction is zero order b. the reaction is first order c. the reaction is second order d. the reaction starts out

asked by elvis on February 18, 2012
89. ## chemistry

At 674.5 K the equilibrium concentrations of N2, H2, and NH3 were 0.1614 M, 0.1128 M, and 0.005892 M, respectively. What is the equilibrium constant for the reaction below? 2 NH3(g) → N2(g) + 3 H2(g)

asked by Andy on May 6, 2014
90. ## Chemistry

The rate law of a reaction, A-> B+C is given by the expression: Rate=k, where k=0.0113 mol/L min. If the initial concentration of the reactant is 0.225 mol/L, how long does it take for the concentration to decrease to 0.180 mol/L? I know i have to find the

asked by James on September 14, 2010
91. ## chem 12

1.00 mol of N2O4 and 1.00 mol of NO2 are placed in an 800 mL container. Calculate the initial concentrations of each gas. N2O4= 1.25 mol/L NO2=1.25 mol/L When equilibrium is reached, the concentration of NO2 increases by 0.50mol/L. Calculate the

asked by George on February 6, 2016
92. ## Chemistry

For the reaction of hydrazine (N2H4) in water, Kb is 3.0 10-6. H2NNH2(aq) + H2O(l) H2NNH3+(aq) + OH -(aq) Calculate the concentrations of all species and the pH of a 2.2 M solution of hydrazine in water. okay so i don't know how to do this problem because

asked by Lori on February 14, 2009
93. ## chemistry kinetics

The reaction SO2Cl2(g) → SO2(g) + Cl2(g) is a first order reaction carried out at constant volume at 600 K whose t1/2 is 4.1 hr. The initial pressure of SO2Cl2 is 1.25 atm. What will be the total pressure of the system after 1 hour?

asked by swa on May 24, 2012
94. ## Chemistry

if the initial concentration of the reactant in the first order reaction A→products is 0.64 mol/L and the half-life is 30 s, calculate the concentration of reactant 120 s after initiation of the reaction

asked by saud on November 18, 2011
95. ## Science

An investigation was conducted to study the effect of the concentration of a reactant on the (trial) time need to complete a chemical reaction. Four trials of the same reaction were performed.In each trial the initial concertration of the reactant was

asked by Dena Cali on February 6, 2007
96. ## Chemistry

You are staying the reaction A2 (g)+B2 (g)=2AB (g) To determine its rate law .Assuming that you have a valid experimental procedure for obtaining (A2)& (B2) at various times, explain how you determine (a)the initial, (b) the reaction order, & (c) the rate

asked by Munavvar on February 28, 2015
97. ## Chemistry

At 350 K, Kc = 0.142 for the reaction 2 BrCl(g) ⇀↽ Br2(g) + Cl2(g) An equilibrium mixture at this temperature contains equal concentrations of bromine and chlorine, 0.077 mol/L. What is the equilibrium concentration of BrCl?

asked by Matthew on April 23, 2016
98. ## Chemistry

I need to calculate the mass of CO2 produced in the reaction of NaHCO3 + HCl Data Mass of NaHCO3 = .05g Mass of system before reaction 117.9 g Mass of system after reaction 117l98 Maxium pressure 1.4094 initial pressure 1.0094 pressure change .4 temp

asked by Sarah on June 24, 2014
99. ## chem

1) If more reactant is added to a gaseous reaction at equilibrium, what will happen to the value of the equilibrium constant? a. it will increase b. it will decrease c. it will remain the same d. it can either increase or decrease 2) Which of the following

asked by HEATHER on February 1, 2012
100. ## Chemistry

A 1.0 mL volume of 0.010 M H2SO4 is added to a mixture of 6 drops of 0.010 M HIO3, 14 drops of deionized water, and 1 drop of starch solution. A color change in the reaction mixture occurred after 56 seconds. a. Assuming 20 drops per milliliter for all

asked by Aly on February 2, 2016