Energy is added to a piston-cylinder arrangement. The piston is withdrawn in such a way that the temperature remains constant. The initial pressure and volume are 200 KPa and 2m^3, respectively. If the final pressure is 100 KPa, determine the

26,026 results
  1. Fluid mechanics, Hydraulics

    Piston A has a cross section of 1200 sq.cm. While that of piston B is 950 sq.cm. with the latter higher than piston A by 1.75m. If the intervening passages are filled with oil whose specific gravity is 0.80, what is the difference in pressure between A and

  2. Physics

    In a hydraulic lift, if the radius of the smaller piston is 2 cm and the radius of the larger piston is 20 cm, what weight can the larger piston support when a force of 250 N is applied to the smaller piston? d = diameter of smaller piston D = diameter of

  3. physics

    consider a vertical piston system. the piston has a 50g mass and a given radius of 3mm. what amount of pressure does the piston exert? ( use g==9.8 m/s^2 )

  4. Thermodynamics

    3. A gas is confined in a 0.47-m-diameter cylinder by a piston, on which rests a weight. The mass of the piston and weight together is 150 kg. The atmospheric pressure is 101 kPa. (a)What is the pressure of the gas in kPa? (b) If the gas in the cylinder is

  5. chemistry

    The air within a piston equipped with a cylinder absorbs 570J of heat and expands from an initial volume of 0.12L to a final volume of 0.88L against an external pressure of 1.0 atm. What is the change in internal energy of the air within the piston?

  6. physics

    A cylinder that has a 40.0 cm radius and is 50.0 cm deep is filled with air at 20.0°C and 1.00 atm. A 21.0 kg piston is now lowered into the cylinder, compressing the air trapped inside. Finally, a 79.0 kg man stands on the piston, further compressing the

  7. physics

    in the hydraulic machine shown, you observe that when the small piston is pulled down 10cm, yhe large piston is raised 1 cm. if the small piston is pushed down with a force of 100n, what is the most weight that the large piston can support?

  8. physics

    a 15000N car on a hydrolyic lift rests on a cylinder with a piston of radius 0.20M,. if a connecting cylinder with a piston of 0.04M radius is driven by compressed air, what force must be applied to the smaller piston in order to lift the car? am i doing

  9. Physics!

    A piston has a diemaeter of .64 cm. A second piston has a diameter of 3.8 cm. determine the Force necessary on Piston A to support the 500.0 Newton weight on piston B (in the absence of friction.)

  10. Physics

    A car's brake system transfers pressure from the main cylinder to the brake shoes on all four wheels. The surface area of the main cylinder piston is 7.2 sq cm, and that of the piston in each individual brake cylinder is 1.80 sq cm. The driver exerts a

  11. physics help please!

    The motion of a piston in an auto engine is simple harmonic. The piston travels back and forth over a distance of 23 cm, and the piston has a mass of 1.7 kg. 2515 rpm 23 cm max speed of the piston 30.28757 m/s What is the maximum force acting on the piston

  12. thermodynamic

    Energy is added to a piston-cylinder arrangement. The piston is withdrawn in such a way that the temperature remains constant. The initial pressure and volume are 200 KPa and 2m^3, respectively. If the final pressure is 100 KPa, determine the work done by

  13. physics

    A hydraulic press has an input cylinder 1 m in diameter and an output cylinder 2 meters in diameter. Assuming 100% efficiency, find the force exerted by the output piston when a force of 10 Newtons is applied to the input piston. pounds If the input piston

  14. Thermodynamics

    A cylinder contains one liter of air at room temperature (300 K) and atmospheric pressure (10^5 N/m^2). At one end of the cylinder is a massless piston, whose surface area is 0.01 m^2. Suppose that you push the piston in very suddenly, exerting a force of

  15. Gen Chem 2

    The air within a piston equipped with a cylinder absorbs 555 J of heat and expands from an initial volume of 0.12 L to a final volume of 0.87 L against an external pressure of 1.0 atm. What is the change in internal energy of the air within the piston in

  16. biology

    3. A cylinder and an airtight piston are used in the following experiment. The piston is pushed up and down in the cylinder and the resulting pressure of the air inside the cylinder is measured with a pressure gauge. The results of the experiment are

  17. Physics

    The load-bearing piston in a certain hydraulic system has an area 35 times as large as the input piston. If the larger piston supports a load of 9000 N, how large a force must be applied to the input piston?

  18. Physics

    A gas is confined in a 0.47-m-diameter cylinder by a piston, on which rests a weight. The mass of the piston and weight together is 150 kg. The atmospheric pressure is 101 kPa. (a)What is the force (in Nt) exerted on the gas by the piston, the weight and

  19. Thermodynamics

    A 10m height cylinder with cross sectional area of 0.1 m2 has a massless piston at the bottom as shown in Figure Q2. Water is at the top of the piston with air at 20oC over it. Under the piston there is air at 300K. The volume of the air is 0.3m3. Heat is

  20. Thermodynamics

    A 10m height cylinder with cross sectional area of 0.1 m2 has a massless piston at the bottom as shown in Figure Q2. Water is at the top of the piston with air at 20oC over it. Under the piston there is air at 300K. The volume of the air is 0.3m3. Heat is

  21. Physics

    The piston in a particular car engine moves in approximately simple harmonic motion with an amplitude of 8 cm. The mass of the piston is 8 kg and the piston makes 100 oscillations per second. Calculate: a) the maximum value if the acceleration of the

  22. Physics

    A cylinder is fitted with a piston, beneath which is a spring, as in the drawing. The cylinder is open at the top. Friction is absent. The spring constant of the spring is 4100 N/m. The piston has a negligible mass and a radius of 0.023 m. (a) When air

  23. chemistry

    The air within a piston equipped with a cylinder absorbs 570J of heat and expands from an initial volume of 0.12L to a final volume of 0.88L against an external pressure of 1.0 atm. What is the change in internal energy of the air within the piston?

  24. chem

    Air trapped in a cylinder fitted with a piston occupies 162.2 mL at 1.08 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 25%?

  25. Chemistry

    a piston performs work of 210. L atm on the surroundings, while the cylinder in which it is placed expands from 10. L to 25L. at the same time, 45J of heat is transferred from the surroundings to the system. Against what pressure was the piston working?

  26. Physics

    Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 10-2 m2, and the pressure outside the cylinder is 1.02 105 Pa.

  27. physics

    Air at 1 atm is inside a cylinder 17.9 cm in radius and 17.9 cm in length that sits on a table. The top of the cylinder is sealed with a movable piston. A 24.1-kg block is dropped onto the piston. a) From what height above the piston must the block be

  28. Chemistry

    I need help with part b here's all information. (a) Chlorine gas is added to a glass cylinder of 2.5 cm in radius, fitted with a movable piston. Gas is added until the piston is lifted 5 cm off the bottom of the glass. The pressure on the gas is 1 atm, and

  29. Physics

    A cylinder with a movable piston has the square meter 24cm2. How far will the piston go down if 5.0 kg weight is laid on the piston and the temperature remains the same? P: 1.0 atm. Help please :)

  30. Phyics

    A cylinder which is in a horizontal position contains an unknown noble gas at 4.63 × 104 Pa and is sealed with a massless piston. The piston is slowly, isobarically moved inward 0.202 m, while 1.95 × 104 J of heat is removed from the gas. If the piston

  31. Thermodynamics

    Consider 2 kg of an ideal gas (R=300 J/(kg.K) and Cp=1000 J/(kgK)) contained in a piston cylinder arrangement. The cylinder has a small valve at the end opposite to the piston.The cylinder walls are not adiabatic and allow heat transfer. The initial

  32. physics(check my answers)

    in a piston is locked in place and the cylinder is placed in a boiling water, the temperature, pressure, internal energy are all increase if a piston is being pushed inward, would it have the same answer as above

  33. Physics HELP!!!!!!!!

    Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 10-2 m2, and the pressure outside the cylinder is 1.02 105 Pa.

  34. physics

    A cylinder is fitted with a piston that is connected to the bottom by a spring. The spring has a spring constant of k = 3600 N/m. The cylinder is open to air at the top and is frictionless. The radius of the cylinder is 25 mm and the piston has negligible

  35. Physcis

    Consider the figure below where a cylinder of an ideal gas is closed by an 16 kg movable piston of area = 60 cm2. When the gas is heated from 30 0C to 100 0C the piston rises by 20 cm. The piston is then fastened in place and the gas is cooled back to its

  36. AP Chemistry

    A 34.05 gram liquid sample of an unstable compound is deposited in a metal piston assembly that has a cylinder with a diameter of 20.0 cm. After the sample is added, the piston is placed in contact with the liquid and the piston vent is closed. This

  37. chemistry

    An electrical heater delivers 4.070 kJ of energy (as heat) to a system consisting of the gas inside a cylinder having a movable piston. As a result, the piston moves against a constant external pressure such that P ∆V = 2.442 kJ. What is the change in

  38. physics

    if the big piston is 10 times of the sizes of the smaller piston to balance a 500Nload at the big piston (assume that the piston level are the same and the weight of the big piston can be ignored

  39. Physics

    Read the activity 2-1:Force and Pressure in the lab manual (pages 167-168). As described in the manual, consider a 10 cc syringe is connected to a 50 cc syringe. Information of the syringes are as follows: (mass of 10 cc piston) = 16 g (mass of 50 cc

  40. Physics

    A 50 kg piston with a radius of 50 cm floats on a cylinder that is filled with air. The air in the cylinder fills the entire volume, and begins at a height of 1 m. The cylinder is then heated, so that the column rises to a height of 2 m. What is the work

  41. Physics

    Determine the indicator horse power and piston displacement of a machine of the piston area 100m^2 given the piston stroke to be 600cm and indicating mean pressure to be 500kg/m^2. The number of piston stroke per minute is 4

  42. physics

    Given that the small piston has a radius of 0.0330 meters^2 and the large piston has a radius of 4.00 meters^2. (a) What force will the large piston provide if the small piston is pushed down with a force of 17.0 N?. (b) If the small piston is slowly

  43. chemistry

    Consider a mixture of air and gasoline vapor in a cylinder with a piston. The original volume is 40. cm^3. If the combustion of this mixture releases 950. J of energy, to what volume will the gas expand against a constant pressure of 650. torr if all the

  44. chemistry

    Consider a mixture of air and gasoline vapor in a cylinder with a piston. The original volume is 70. cm3. If the combustion of this mixture releases 885 J of energy, to what volume will the gases expand against a constant pressure of 645 torr if all the

  45. physics

    A movable piston having a mass of 8.00 kg and a cross-sectional area of 5.00 cm2 traps 0.200 moles of an ideal gas in a vertical cylinder. If the piston slides without friction in the cylinder, how much work is done on the gas when its temperature is

  46. physics

    a 15000N car on a hydrolyic lift rests on a cylinder with a piston of radius 0.20M,. if a connecting cylinder with a piston of 0.04M radius is driven by compressed air, what force must be applied to the smaller piston in order to lift the car? am i doing

  47. Physics

    A vertical cylindrical tank contains 1.80 mol of an ideal gas under a pressure of 1.00 atm at 20.0oC. The round part of the tank has a radius of 10.0 cm, and the gas is supporting a piston that can move up and down in the cylinder without friction. (a)

  48. Chem

    In an automobile engine, at the end of the upstroke the piston is at its maximum height in a cylinder of exact dimensions. At this time, a precisely measured mixture of fuel and oxidant ignites to form gaseous products. If the ignition temperature is

  49. physical science

    A piston applies a pressure of 5,000 N/m2 if the piston has a surface area of 0.1 m2 , how much for can the piston apply?

  50. Chemistry- Please help me

    A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00 cm, and a piston is carefully placed on the surface of the compound so that, for all practicla purposes, the distance between the

  51. Chemistry (Internal Energy)

    5 kg of steam contained within a piston-cylinder assembly undergoes an expansion from state 1, where the specific internal energy U(1) is = 2710 [kJ/kg] to state 2, where U(2) = 2660 [kJ/kg]. During the process, there is heat transfer to the steam with a

  52. Physics

    A cylinder with a movable piston contains 14 moles of a monatomic ideal gas at a pressure of 2.26 × 105 Pa. The gas is initially at a temperature of 300 K. An electric heater adds 52600 J of energy into the gas while the piston moves in such a way that

  53. Chemistry

    Air trapped in a cylinder fitted with a piston occupies 163.1 mL at 1.08 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 25%?

  54. chem

    Air trapped in a cylinder fitted with a piston occupies 162.2 mL at 1.08 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 25%? what is the answer? didnt understand?

  55. Chemistry

    a piston performs work of 210. L atm on the surroundings, while the cylinder in which it is placed expands from 10. L to 25L. at the same time, 45J of heat is transferred from the surroundings to the system. Against what pressure was the piston working?

  56. Physic

    A1/2 inch diameter piston moves 10 inches when 30 Lbs of force is applied, how far will it move a 6 inch Diamter piston, and how much weight will this piston lift?

  57. Physic

    A 1/2 inch diameter piston moves 10 inches when 30 Lbs of force is applied how far will it move a 6 inch diamter piston and how much weight will this piston lift.

  58. Physic

    In a hidrolic elevator the larger piston have a length of 0.5m. a) What mass does the car need to have to be lifted by the larger piston if the Force F1 is 200N? b) Is the smallest piston radius 0.04m?

  59. physics

    In the sketch, the small hydraulic piston has a diameter of 2.5cm cm . The large piston has a diameter of 6.4cm cm . For each newton of force applied to the small piston, how many newtons of force are exerted by the large piston? Express your answer using

  60. thermodynamics (dont know what to do)

    a piston cylinder device initially contains 10lb of acetylene at 70F. the piston is free to move to maintain 1000 psia on the gas. how much WORK is done by the gas as it is headed to 300F. (draw pv diagram)

  61. Physics

    A piston in a car engine has a mass of 0.75kg and moves with motion which is approximately simple harmonic. If the amplitude of this oscillation is 10 cm and the maximum safe operating speed of the engine is 6000 revolutions per minute, calculate: a)

  62. physics

    A hydraulic lift has a leak so that it is only 6.0 × 101% efficient in raising its load. If the large piston exerts a force of 1.00 × 102 N when the small piston is depressed with a force of 15 N and the radius of the small piston is 18 cm, what is the

  63. Physics

    Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 10-2 m2, and the pressure outside the cylinder is 1.02 105 Pa.

  64. Chemistry

    A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00 cm, and a piston is carefully placed on the surface of the compound so that, for all practicla purposes, the distance between the

  65. ap chemistry

    A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00 cm, and a piston is carefully placed on the surface of eth compound so that for all practical purposes, the distance between the

  66. physics

    A piston-cylinder assembly with the piston resting on a set of stops, contains 0.5 Kg of He gas intially at 100kPa and 25C. The mass of the piston and the effect of the atmospheric pressure is such that a pressure of 500kPa is required to raise it. How

  67. thermodynamics

    A piston-cylinder device contains 100 g of ethylene gas initially at 27oC, 115 kPa. Ethylene is heated and the piston starts to rise until the volume reaches 90 L and merely touches a linear spring that has a spring constant of 60 kN/m. More heat is added

  68. Physics

    A vertical cylindrical cylinder, closed at the bottom end, contains 0.0100 moles of gas. It is fitted at the top with a piston, which can move freely. The mass of the piston is 14.0 kg and the initial height of the piston above the bottom of the cylinder

  69. Physics HELP!!!!!!!!

    Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 10-2 m2, and the pressure outside the cylinder is 1.02 105 Pa.

  70. Physics

    An elevator operates on a very slow hydraulic jack. Oil is pumped into a cylinder that contains the piston. The piston lifts the elevator as the internal cylinder pressure (P2) rises in comparison to the outside pressure (P1=101,325 Pa or about 14.7 psi).

  71. Physics

    An elevator operates on a very slow hydraulic jack. Oil is pumped into a cylinder that contains the piston. The piston lifts the elevator as the internal cylinder pressure (P2) rises in comparison to the outside pressure (P1=101,325 Pa or about 14.7 psi).

  72. Ap Physics

    Read the activity 2-1:Force and Pressure in the lab manual (pages 167-168). As described in the manual, consider a 10 cc syringe is connected to a 50 cc syringe. Information of the syringes are as follows: (mass of 10 cc piston) = 16 g (mass of 50 cc

  73. Physics

    Read the activity 2-1:Force and Pressure in the lab manual (pages 167-168). As described in the manual, consider a 10 cc syringe is connected to a 50 cc syringe. Information of the syringes are as follows: (mass of 10 cc piston) = 16 g (mass of 50 cc

  74. Physics

    A gas sample is confined to a chamber with a movable piston. A small load is placed on the piston and the system is allowed to reach equilibrium, shown above. If the weight of the piston and the load is F=70.0 N and the piston has an area of A=9.00x10-4

  75. physics

    In a hydraulic piston set up, one circular piston has a diameter of 2 cm,while the other piston has a diameter of 6cm. Calculate the ratio of the force exerted by the larger piston to the force applied to the smaller piston?

  76. physics

    In a hydraulic piston, the small piston has a diameter of 2cm and the large piston has a diameter of 6m. How much more force can the larger piston exert compared with the force applied to the smaller piston?

  77. phys101

    a hydraulic press contains oil of density=800kg/meter cube,and the areas of the large cylinder=0.5meter squad and area of small cylinder=0.0001meter squad.the mass of the large piston is 51kg,while the small piston has unknown mass m.If an additonal mass

  78. Physics please check

    A cylinder is fitted with a piston, beneath which is a spring, as in the drawing. The cylinder is open at the top. Friction is absent. The spring constant of the spring is 4000 N/m. The piston has a negligible mass and a radius of 0.022 m. (a) When air

  79. Physics-Thermo

    Imagine a 600 g of water at 70oC in a piston-cylinder device. Initially, the 9-kg, 13-cm diameter piston rests on two stops such that the water occupies a volume of 0.2 m3. Heat is transferred to the system until the water is completely vaporized. Take the

  80. Chemistry

    Consider a mixture of air and gasoline vapor in a cylinder with a piston. The original volume is 50. cm3. If the combustion of this mixture releases 990. J of energy, to what volume will the gases expand against a constant pressure of 645 torr if all the

  81. College Chemistry

    Consider a mixture of air and gasoline vapor in a cylinder with a piston. The original volume is 50. cm3. If the combustion of this mixture releases 955 J of energy, to what volume will the gases expand against a constant pressure of 675 torr if all the

  82. college physics

    i just need to know if i got the right answer. plz thankyou a 15000N car on a hydrolyic lift rests on a cylinder with a piston of radius 0.20M,. if a connecting cylinder with a piston of 0.04M radius is driven by compressed air, what force must be applied

  83. physics help please...

    A movable piston having a mass of 8.00 kg and a cross-sectional area of 5.00 cm2 traps 0.200 moles of an ideal gas in a vertical cylinder. If the piston slides without friction in the cylinder, how much work is done on the gas when its temperature is

  84. College Physics

    a 15000N car on a hydrolyic lift rests on a cylinder with a piston of radius 0.20M,. if a connecting cylinder with a piston of 0.04M radius is driven by compressed air, what force must be applied to the smaller piston in order to lift the car? am i doing

  85. Chemistry

    Consider a mixture of air and gasoline vapor in a cylinder with a piston. The original volume is 30. cm3. If the combustion of this mixture releases 980. J of energy, to what volume will the gases expand against a constant pressure of 640. torr if all the

  86. Physics

    A movable piston having a mass of 7.26 kg and a cross-sectional area of 5.26 cm2 traps 0.250 moles of an ideal gas in a vertical cylinder. If the piston slides without friction in the cylinder, how much work will the gas do when its temperature is

  87. physics

    A cylinder is fitted with a piston, beneath which is a spring, as in the drawing. The cylinder is open to the air at the top. Friction is absent. The spring constant of the spring is 4100 N/m. The piston has a negligible mass and a radius of 0.010 m. (a)

  88. physics

    The small piston has a diameter of 2cm and the large piston has a diameter of 6cm. How much more force can the larger piston exert compared with the force applied to the smaller piston?

  89. 11th grade

    A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.0 cm, and a piston is carefully placed on the surface of the compound so that, for all practical purposes, the distance between the

  90. Chemistry

    A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.0 cm, and a piston is carefully placed on the surface of the compound so that, for all practical purposes, the distance between the

  91. AP Chemistry

    I have the following marathon problem but am unsure where to start: A Sample consisting of 22.7g of nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00cm, and a piston is carefully placed on the surface of the compound

  92. AP Chemistry

    I have the following marathon problem but am unsure where to start: A Sample consisting of 22.7g of nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00cm, and a piston is carefully placed on the surface of the compound

  93. Physics

    2 moles of ideal gas are in a cylinder container with cross-sectional area 1*10^-2 m^3. Cylinder is fitted with a light, movable piston that is open to atmosphere, where pressure is 10^-5 PA.A 50KG MASS PLACED ON PISTON KEEPS IT IN mechanical equilibrium

  94. Physics

    If you have a hydraulic lift and you know the density of the oil inside, the area of the cylinder and the area of the piston and the force that needs to be applied to lift as certain weight and the weight of that object...how do you find the height that

  95. Physics

    A block rides on a piston that is moving vertically with simple harmonic motion. (a) If the SHM has period 3.1 s, at what amplitude of motion will the block and piston separate? (b) If the piston has an amplitude of 9.6 cm, what is the maximum frequency

  96. Chemistry

    Consider a mixture of air and gasoline vapor in a cylinder with a piston. The original volume is 70. cm3. If the combustion of this mixture releases 930. J of energy, to what volume will the gases expand against a constant pressure of 670. torr if all the

  97. chm

    A cylinder with a movable piston contains 2.00 of helium,He, at room temperature. More helium was added to the cylinder and the volume was adjusted so that the gas pressure remained the same. How many grams of helium were added to the cylinder if the

  98. Physics

    If the output piston in a hydraulic pump exerts a greater force than one applied to the input poston, is the pressure at the outpit piston also larger than at the input piston? Im really not even sure how to go about this question.

  99. math

    The head of a round piston has a pressure of 210 psi pushing down on it. The piston is 3 inches in diameter. What is the force pushing the piston down?

  100. physics

    A piston in a car engine has a mass of 0.75 kg and moves with motion wich was approximately simple harmonic. If the amplitude of zis oscillation is 10 cm and z max. safe operating speed of z engine is 6000 rev. per min. Calculate: a. Max acceleration of z

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20