Consider the titration of 100.0 mL of 0.100 M NaOH with 1.00 M HBr. Find the pH at the following volumes of acid added and make a graph of pH versus Va: Va = 0, 1, 5, 9, 9.9, 10,

113,925 results
  1. Chemistry

    1.) Watch the animation, and observe the titration process using a standard 0.100 M sodium hydroxide solution to titrate 50.0 mL of a 0.100 M hydrochloric acid solution. Identify which of the following statements regarding acid-base titrations are correct

  2. science

    Calculate the pH at 0, 10, 90, 100 & 110% titration for the titration of 50.0ml of 0.1M HCl with 0.10M NaOH?

  3. Phenolphtalein vs Methyl Orange (check my reasonin

    Why can either phenolphthalein or methyl orange be used for an HCl-NaOH titration, but only phnolphthalein is suitable for an acetic acid-NaOH titration? Sol: for a while,I misunderstood the question and suggested that Phenol. has a wider array of pH. But

  4. Chemistry

    1. Calculate the pH for each of the following cases in the titration of 25.0 mL of 0.240 M pyridine, C5H5N(aq) with 0.240 M HBr(aq): (a) before addition of any HBr (b) after addition of 12.5 mL of HBr (c) after addition of 22.0 mL of HBr (d) after addition

  5. Chemistry

    During an acid-base titration, 25 mL of NaOH 0.2 M were required to neutralize 20 mL of HCl. Calculate the pH of the solution for each: a) Before titration b) After adding 24.9 mL of NaOH c) At equivalence pt d) After adding 25. 1 mL of NaOH e) The pH of

  6. Chemistry

    A 500.0-mL buffer solution is 0.100 M in HNO2 and 0.150 M in KNO2. Determine whether or not each of the following additions would exceed the capacity of the buffer to neutralize it. a. 250 mg NaOH b. 350 mg KOH c. 1.25 g HBr d. 1.35 g HI Can you explain to

  7. chemistry help asap

    Please check these thanks. 1. In a titration, 33.21 mL 0.3020M rubidium hydroxide solution is required to exactly neutralize 20.00 mL hydrofluroic acid solution. What is the molarity of the hydrofluroic acid solution? Answer: 0.502HF 2. A 35.00 mL-sample

  8. College Chemistry

    the acid dissociation constant for acetic acid is 1.85x10^-5. Calculate the pH at the equivalent point and the pH at one-half the equivalence point for the titration of 25.00 mL of 0.100 M acetic acid with 0.100 M NaOH?

  9. Chemistry

    Consider the titration of 100.0 mL of 0.100 M H2NNH2 (Kb = 3.0 10-6) by 0.200 M HNO3. Calculate the pH of the resulting solution after the following volumes of HNO3 have been added. a)0.0 mL b)20.0 mL c)25.0 mL d)40.0 mL e)50.0 mL f)100.0 mL

  10. Chemistry

    Which of the following mixtures will result in the formation of a buffer solution if all solutions are 1.0 M before mixing? i) 100. mL of NH3(aq) and 100. mL of HCl(aq). ii) 100. mL of NH3(aq) and 50. mL of HCl(aq). iii) 100. mL of NH3(aq) and 50. mL

  11. Chemistry

    A weak acid with a Ka of 1.8 × 10–5 is titrated with a strong base. During the titration,12.5 mL of 0.10 M NaOH is added to 50.0 mL of 0.100 M acetic acid. What is the pH after the addition of the NaOH? A. 7.22 B. 5.13 C. 4.26 D. 8.59 I know without any

  12. Chemistry

    Choose the correct one: 1) 25.00 mL is taken from a solution containing NaOH, NaHCO3 and Na2CO3 individually or as a mixture. up to the phenolphthalein milestone when analyzed When 11.00 mL of 0.100 M HCl is taken and a second 25.00 mL is taken and

  13. Chemistry

    Choose the correct one: 1) 25.00 mL is taken from a solution containing NaOH, NaHCO3 and Na2CO3 individually or as a mixture. up to the phenolphthalein milestone when analyzed When 11.00 mL of 0.100 M HCl is taken and a second 25.00 mL is taken and

  14. Chemistry

    How to solve titration problem for HC2H3O2 + NaOH= NaC2H3O2 + H2O The M of NaOH= 0.427 The volume of NaOH= 17.30mL 10.00mL of acid The second titration calculation is: The M of NaOH= 0.427 The volume of NaOH=34.60mL 20.00mL of acid

  15. Titration

    Consider the titration of 100.0 mL of 0.100 M NaOH with 1.00 M HBr. Find the pH at the following volumes of acid added and make a graph of pH versus Va: Va = 0, 1, 5, 9, 9.9, 10, 10.1, and 12 mL.

  16. Chemistry

    Explain why the volume of 0.100 M NaOH required to reach the equivalence point in the titration of 25.00 mL of 0.100 M HA is the same regardless of whether HA is a strong or weak acid, yet the pH at the equivalence point is not the same

  17. AP CHEMISTRY

    Calculate the pH at the equivalence point in titrating 0.100 M solutions of each of the following with 0.080 M NaOH. a)hydrobromic acid (HBr) b)chlorous acid (HClO2) c)benzoic acid (C6H5COOH)

  18. Chemistry

    1)A buffer solution that is 0.10 M sodium acetate and 0.20 M acetic acid is prepared. Calculate the initial pH of this solution. The Ka for CH3COOH is 1.8 x 10-5 M. As usual, report pH to 2 decimal places. *A buffered solution resists a change in pH.*

  19. AP Chemsitry

    A solution of an unknown monoprotic weak acid was titrated with 0.100 M NaOH. The equivalence point was reached when 37.48 ML of base had been added. From a second buret, exactly 18.74 of 0.100 M HCl were added to the titration solution. The pH was then

  20. Chem - Titration

    A 100.0-mL aliquot of 0.100 M diprotic acid H2A (pK1 = 4.00, pK2 = 8.00) was titrated with 1.00 m NaOH. Find the pH at the following volumes of base added and make a graph of pH versus Vb: Vb = 0, 1, 5, 9, 10, 11, 15, 19, 20, and 22 mL

  21. Chemistry

    what volume of 0.120 M NaOH must be added to 100 ml of 0.100 M NaHC2O4 to reach ph of 4.70? H2C2O4 Ka1 = 5.9 x 10-2 HC2O4^- Ka2 = 5.1 x 10-5 The answer is 60 ml but I don't know how to find it. Can you please show me the steps and how to do it please

  22. Chemistry help!!

    Consider the titration of the weak acid HA with NaOH. At what fraction of Ve does pH = pKa - 1? At what fraction of Ve does pH = pKa + 1? Calculate the pH at these two points plus Vb = 0, 1/2Ve, Ve and 1.2Ve, if 100 mL of 0.100 M anilinium bromide (pKa =

  23. Chemistry

    I don't know how to do Titration problems! I have an emergency homework assignment that's crucial to my grade! Please help with tips and step by step response! Please help!- 1. 50ml of 0.3 M KOH are required to titrate 60 ml of H^2SO^4. What is the M of

  24. Ap Chemistry

    Calculate the pH at the equivalence point in titrating 0.100 M solutions of each of the following with 0.038 M NaOH. (a) hydrobromic acid (HBr) (b) lactic acid (HC3H5O3) (c) sodium hydrogen chromate (NaHCrO4)

  25. Chemistry

    When a diprotic acid, H2A, is titrated by NaOH, the protons on the diprotic acid are generally removed one at a time, resulting in a pH curve that has the following generic shape. (a) Notice that the plot has essentially two titration curves. If the first

  26. Chemistry

    25.0 mL of 0.100 M acetic acid (Ka= 1.8 x 10^-5) is titrated with 0.100 M NaOH. Calculate the pH after the addtion of 27.00 mL of 0.100M NaOH. my work CH3COOH + H2O H3O^+ + CH3COO^- 25mL x 0.100 mmol/ml = 2.5mmol CH3COOH 27mL x 0.100 mmol/ml = 2.7mmol NaOH

  27. Math

    Mackenzie solved the problem 1.35×1.4. Which shows the correct work to find the product? A. ( 135 × 1 10 ) × ( 14 × 1 10 ) ( 135 × 14 ) × ( 1 10 × 1 10 ) B. ( 135 × 1 100 ) × ( 14 × 1 10 ) ( 135 × 14 ) × ( 1 100 × 1 10 ) C. ( 135 × 1 10 ) ×

  28. Analy Chem

    Consider the titration of 100.0 mL of 0.110 M NaOH with 1.00 M HBr. Find the pH at the following volumes of acid added and make a graph of pH versus Va:Va = 0,2,5,8,10,10.1,11,11.1, and 12mL. Compute Ve, first.

  29. statistics

    A professional basketball player has embarked on a program to study his ability to shoot foul shots. On each day in which a game is not scheduled, he intends to shoot 100 foul shots. He maintains records over a period of 40 days of practice, with the

  30. Analytical Chemistry 2

    Consider the titration of the weak acid HA with NaOH. At what fraction of Ve does pH = pKa - 1? At what fraction of Ve does pH = pKa + 1? Calculate the pH at these two points plus Vb = 0, 1/2Ve, Ve and 1.2Ve, if 100 mL of 0.100 M anilinium bromide (pKa =

  31. chemistry

    So I did a titration lab at school with NaOH and HCl. i have to find: - volume used, NaOH - Moles of NaOH - Moles of HCl -Volume used unknown HCl - Molarity of HCl solution My concentration of NaOH stock solution was 0.100 mol/lL Final buret reading, NaOH:

  32. Chemistry

    Consider the titration of 50 mL of 0.250 M HCl with 0.1250 M NaOH. Calculate the pH of the resulting solution after the following volumes of Na OH have been added. a) 0.00 mL b) 50.00 mL c) 99.90 mL d) 100.00 mL e) 100.1 mL The question is, I get, for

  33. Chemistry

    A 100.0 ml sample of .50 M HCl (aq) is titrated with a .10 M NaOH. What volume of the NaOH solution is required to reach the endpoint of the titration?

  34. Chem

    25.0 mL of 0.100 M acetic acid (Ka= 1.8 x 10^-5) is titrated with 0.100 M NaOH. Calculate the pH after the addtion of 27.00 mL of 0.100M NaOH. my work CH3COOH + H2O H3O^+ + CH3COO^- 25mL x 0.100 mmol/ml = 2.5mmol CH3COOH 27mL x 0.100 mmol/ml = 2.7mmol NaOH

  35. chemistry

    For each of the following primary standard acids, write the titration equation and calculate the volume of 0.100 M NaOH required for the titration: (i) 300 mg benzoic acid (C6H5COOH) (ii) 200 mg oxalic acid dihydrate (C2O4H2.2H2O) Equations: (i): C6H5COOH

  36. chemistry

    Hello, im having major issues with this problem...I need to find a pH for a 100.0-mL solution of 0.017 M CH3COOH (Ka = 1.8 10-5) is titrated with 0.025 M NaOH. Now, I've gotten some the answers all ready (right answers have *)....but three of them are

  37. chemistry

    a sample of 20.0 mL of 0.100 M HCN (Ka=6.2*10^-10) is titrated with 0.150 M NaOH. a) what volume of NaOH is used in this titration to reach the equivalence point? b) What is the molar concentration of CN- at the equivalence point? c) What is the pH of the

  38. Chemistry

    I there, this is my lab worksheet, I am having trouble filling it out. Please help me with it. Expt #1- Molecular Weight of Unknown Acid Unknown Acid: #3 Mass of Unknown solid acid transferred:1.0g Volume of volumetric flask: 100.00 mL Concentration of

  39. College Chemistry

    I need help with this question!! a sample of pure KHP weighing .8097g dissolved in water and titrated with 40.25 mL of NaOH solution. The same NaOH solution was used to titrate a solution of a weak diprotic acid H2X. A sample of 0.18694g of the weak acid

  40. chemistry

    Calculate the pH for each of the following cases in the titration of 25.0 mL of 0.180 M pyridine, C5H5N(aq) with 0.180 M HBr(aq): 1)before addition of any HBr 2)after addition of 12.5 ml of HBr: 3)after addition of 16 ml of HBr: 4)after addition of 25 ml

  41. math help, correction

    Anna has 12 bills in her wallet, some $5 and some $10. The total value of the bills is $100. HOw many of each bill odes Anna have? How do i solve these type of problems my quess was this but i don't know if i'm correct. 5(x) + 10(y) = 100 5(0) + 10y = 100

  42. Chemistry

    A 100.0mL solution containing aqueous HCl and HBr was titrated with 0.1290M NaOH. The volume of base required to neutralize the acid was 47.56mL. Aqueous AgNO3 was then added to precipitate the Cl- and Br- ions as AgCl and AgBr. The mass of the silver

  43. chemistry

    What is the ion in the resulting solution? 100.0 mL of 0.015 M K2CO3 and 100.0 mL of 0.0075 M BaBr2? 25 mL of 0.57 M Ni(NO3)2 and 100.0 mL of 0.150 M NaOH

  44. Chem 2 lab

    the acid dissociation constant for acetic acid is 1.85x10^-5. Calculate the pH at the equivalent point and the pH at one-half the equivalence point for the titration of 25.00 mL of 0.100 M acetic acid with 0.100 M NaOH? Its been a little while since ive

  45. Chemistry

    Calculate the pH after 0.011 mol NaOH is added to 1.00 L of each of the four solutions. a) 0.100 M propanoic acid (HC3H5O2, Ka= 1.3 10-5) b) 0.100 M sodium propanoate (NaC3H5O2) c)pure H2O d) 0.100 M HC3H5O2 and 0.100 M NaC3H5O2

  46. Chemistry

    what volume of 0.120 M NaOH must be added to 100 ml of 0.100 M NaHC2O4 to reach ph of 4.70? The answer is 60 ml but I don't know how to find it. Can you please show me the steps and how to do it please

  47. chemisry

    A 0.1 molal solution of a weak monoprotic acid was found to depress the freezing point of water 0.1930C. Determine the Ka of the acid. You can assume 0.1 molal and 0.1 molar are equivalent. 100 ml of a 0.1M solution of the above acid is titrated with 0.1 M

  48. Chemistry

    The titration of a sample of a weak acid with an equivalent weight of 108 grams requires 38.2 mL of 0.100 M NaOH. What is the sample mass in mg?

  49. chemistry

    Robin the Research scientist prepares 100 mLs of a solution of 100 mM of Tris HCl. What is the pH? and part two for this question Calculate the pH when the scientist adds 100 ul of 50% NaOH

  50. Chemistry

    I've been working on this problem for hours and cant figure it out. I know it should be simple, but I'm stuck... The question is... Describe how to prepare 1.00L of a 1.0% (w/v) NaOH from a 2.0 M NaOH. *I need to figure out how many ml of the stock

  51. Chemistry

    Robin the Research scientist prepares 100 mLs of a solution of 100 mM of Tris HCl. What is the pH? and part two for this question Calculate the pH when the scientist adds 100 ul of 50% NaOH I am confused since we do not know the conjugate base

  52. Chemistry

    1)A buffer solution that is 0.10 M sodium acetate and 0.20 M acetic acid is prepared. Calculate the initial pH of this solution. The Ka for CH3COOH is 1.8 x 10-5 M. As usual, report pH to 2 decimal places. *A buffered solution resists a change in pH.*

  53. Analytical Chemistry

    Consider the titration of 100.0 mL of 0.100 M NaOH with 1.00 M HBr. Find the pH at the following volumes of acid added and make a graph of pH versus Va: Va = 0,6 and 12 mL

  54. Chemistry

    how do you find the pH of a titration solution at its halfway point to the equivalence, and how would it affect solutions dealing with strong acids and strong bases, this is an example just to see it quantitatively: 100.0 mL of 0.100 M HF (Ka = 7.2 x 10-4)

  55. Chemistry

    Calculate the pH of the the solution that results from titrating 50 mL of 0.6 M NaOCl(aq) with 0.3 M HBr At 0.00 mL of HBr: At 70 mL of HBr: At 100 mL HBr: At 120 mL of HBr

  56. college chemistry

    In class, we discussed the titration of a 50.0 mL sample of 0.100 M HCL with a 0.100 M solution of NaOH. How would this system change if we used a 0.100 M solution of Sr(OH)2 instead of NaOH? To answer this question, complete each of the following: a) What

  57. chemistry

    using leChatlier's principle, which of following is more or less soluble in following solutions than in pure water. and explaination for each asked for. Compared to pure water are they less, more or same? thanks. AgBr in 0.100M HBr AgBr IN 0.100 m HNO3

  58. Chemistry

    Consider a weak acid-strong base titration in which 25.0 mL of 0.100 M acetic acid is titrated with 0.100 M NaOH. a) Calculate the pH after the addition of 3.00mL of NaOH. b) What is the pH of the solution before the addition of NaOH (pKa of acetic

  59. Chemistry

    Consider the titration of 100.0mL of 0.10 M malonic acid with 0.10 M NaOH. What is the pH after the addition of 175 mL NaOH?

  60. chem

    calculate the pH during the titration of 100 mL of .200 M HCl with .400 M NaOH after 0,25, 50, and 75 mL NaOH have been added

  61. chemistry

    The titration of HCl with NaOH is represented by the equation HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l) What volume of 0.100 M HCl is required to titrate 50.0 mL of 0.500 M NaOH?

  62. Chemistry

    Calculate the change in pH when 9.00 mL of 0.100 M NaOH(aq) is added to 100.0 mL of a buffer solution that is 0.100 M in NH3(aq) and 0.100 M in NH4Cl(aq).

  63. CHEMISTRY (WEBWORK)

    What is the pH of the solution created by combining 1.20 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? mL NaOH pH w/ HCl pH w/ HC2H3O2 1.20 ? ? Complete the table below: What are the pH values if you

  64. Chemistry

    Consider the titration of 100.0 mL of 0.260 M propanoic acid (Ka = 1.3 ✕ 10−5) with 0.130 M NaOH. Calculate the pH of the resulting solution after each of the following volumes of NaOH has been added. (Assume that all solutions are at 25°C.) (a) 0.0

  65. chemistry

    Hello, im having major issues with this problem...A 100.0-mL solution of 0.017 M CH3COOH (Ka = 1.8 10-5) is titrated with 0.025 M NaOH. Now, I've gotten some the answers all ready (right answers have *)....but three of them are wrong, can someone tell me

  66. AP Chemistry

    A vessel contains 500. milliliters of a 0.100-molar H2S solution. For H2S, Ka1 = 1.0 X 10-7 and Ka2 = 1.3 X 10-13 (a) What is the pH of the solution? (b) How many milliliters of 0.100-molar NaOH solution must be added to the solution to create a solution

  67. Chemistry

    Unknown Acid: #2 Mass of Unknown solid acid transferred:0.414g Volume of volumetric flask: 100.00 mL Concentration of NaOH: 0.0989 M Aliqot of acid titrated with NaOH: 25.00 mL Average volume of Naoh from titration: 13.9 mL Here's where I need help: No of

  68. chemistry

    11.During an acid-base titration, 25 mL of NaOH 0.2 M were required to neutralize 20 mL of HCl. Calculate the pH of the solution for each of the following: 12.Before the titration. 13.After adding 24.9 mL of NaOH. 14.At the equivalence point. 15.After

  69. Chemistry

    Expt #1- Molecular Weight of Unknown Acid Unknown Acid: #2 Mass of Unknown solid acid transferred:0.414g Volume of volumetric flask: 100.00 mL Concentration of NaOH: 0.0989 M Aliqot of acid titrated with NaOH: 25.00 mL Average volume of Naoh from

  70. Chemistry

    Calculate the concentration of a 50.0mL sample of HBr acid, which was titrated with 37.7 mL of 0.57 M NaOH base. Why is an overshot endpoint not a good titration?

  71. General Chemistry

    A 0.179 g sample of a vitamin C tablet was titrated with 0.1000 M NaOH according to the procedure in this experiment. The titration required 7.08 mL of NaOH solution. How many moles of NaOH were used in the titration?

  72. Chemistry

    A volume of 25.0 ml of 0.100 M CH3C02H is titrated with 0.100 M NaOH. What is pH after the addition of 12.5 ml of NaOH? (Ka for CH3CO2H = 1.8x10-5)

  73. chemistry

    hi im having problems figuring this out. consider the titration of 100 ml of 0.200 acetic acid by 0.100 koh. Calculate the ph if 250 ml of koh is added ? I tried to find the limiting reagent and go from there but it was a no go then i used the kb for find

  74. chemistry

    I need some help with calculating percent yield and percent purity of aspirin. Here's my data (questions follow): SYNTHESIS Mass of salicylic acid.., 2.0 g Volume of acetic anhydride.., 5 mL Mass of watch glass.., 22.10 g Mass of aspirin and watch glass..,

  75. Statistics Help Please

    The following data were collected on non-conformances for a period of 10 days. Day Sample Size Non-conformances 1 100 12 2 100 14 3 100 10 4 100 18 5 100 22 6 100 14 7 100 15 8 100 13 9 100 14 10 100 16 On what day is the proportion of non-conformances

  76. Chemistry

    Consider the titration of 25.0mL of 0.10M HAc with 0.10M NaOH. That is, NaOH is added to HAc. (a)pH at the beginning of titration. (b)pH at the equivalence point of the titration. (c) pH at the midpoint of the titration.

  77. chemistry

    a. A 0.1 molal solution of a weak monoprotic acid was found to depress the freezing point of water 0.1930C. Determine the Ka of the acid. You can assume 0.1 molal and 0.1 molar are equivalent. b. 100 ml of a 0.1M solution of the above acid is titrated with

  78. chemistry

    Which of the following when added to 100.0mL of a 0.100M soln of NH4Cl would produce a buffer soln? a.100.0mL of 0.100 M HCl soln b. 100.0mL of 0.050M NaOH soln c. 100.0mL of 0.100M NaOH soln d. 100.0mL of 0.050M NH4No3 soln e.none of the above

  79. Jill

    State the relationship of A to B (i.e. , = or can't be determined). 1. Using a 0.05 M Ag+ titrant A.VEP in titration 25-mL of 0.01 M MgCl2 B.VEP in titrating 25-mL of 0.01 M AlCl3 2. A 25.0-mL solution contains 0.015 M NaCl and 0.010 M HCl A.VEP (Mohr)

  80. Chemistry

    The resulting pH of a solution when 100 mL of 0.877 M NH3 is mixed with 100 mL of 0.481 M HBr is ___. For NH3, Kb = 1.8 × 10−5.

  81. Chemistry

    The triation of 50.00 mL of 0.025 00 M MES with 0.100 0 M NaOH. MES is a weak acid with pKa=6.27. Compute Ve, first. Show what happens at the four stages of the titration: Va = 0,2,5,10,10.1,11,12, and 12.2 mL. I NEED HELP!!!!

  82. chemistry

    how do i calculate the NaOH molarity from a titration of KHP and NaOH after preparing KHP to standardise NaOH. KHP mass was 2.0378g dissoveld in distilled water to fill up a 100ml volumetric flask and only 10ml of this solution was used to in titration

  83. Chemistry

    Calculate the molar mass of a diprotic acid. The reaction reaches the endpoint of the titration with NaOH at 28ml. The initial concentration of NaOH is 0.09792. and the initial mass of the diprotic acid is 0.685g. How do you get to the final answer? All of

  84. Chemistry 12

    Hey guys i only have this question left on my review and i just can't fingure it out! Sketch a pH curve for the titration of 40.00mL of 0.100 M hydrazine, H2NNH2, having a K of 3.0x10^-6 by 0.100 M HCIO4 a) what combination of acide-base titration is this?

  85. chem12

    Hey guys i only have this question left on my review and i just can't fingure it out! Sketch a pH curve for the titration of 40.00mL of 0.100 M hydrazine, H2NNH2, having a K of 3.0x10^-6 by 0.100 M HCIO4 a) what combination of acide-base titration is this?

  86. English

    I have 100 dollars. I have 100 pounds. I have 100 pesos. I have 100 euros. I have 100 yen. I have 100 won. I have 100 yuan. (Are all correct? Don't we need to capitalize the first letter in each money name? What about the plural forms? Are all correct? Do

  87. science

    Which of the following samples will react completely with 20.0 mL of 0.200 M LiOH 10.0ML of 0.100 M HCL 10.0mL of 0.200 M H2SO4 10.0mL of 0.100 M HNO3 20.0mL of 0.200 M H3PO4 20.0mL of 0.100 M HBr How do I do this problem??

  88. AP Chem

    1.513g of monoprotic acid (HX) is dissolved in water, and the volume is 250.0 ml after the dissolving. The solution was then titrated 38.12g of .100 M NaOH to reach the end point of the titration. What is the molecular weight of HX?

  89. Chemistry

    A weak acid with an initial pH of 3.2 was titrated with a strong base. 15 mL of 0.1 M NaOH was added to the acid to reach the equivalence point at a pH of 8.6. What would you expect the approximate pH of the analyte to be after the first 5 mL of 0.1 M NaOH

  90. chemistry

    How to solve titration problem for HC2H3O2 + NaOH= NaC2H3O2 + H2O The M of NaOH= 0.427 The volume of NaOH= 17.30mL 10.00mL of acid The second titration calculation is: The M of NaOH= 0.427 The volume of NaOH=34.60mL 20.00mL of acid

  91. mathematics (percentages)

    math problem: pedro wants to calculate his gpa. he has the lab grades:90/100,98/100,90/100,94/100,90/100,90/100,95/100,98/100. Labs are worth 20%. He has the test grades: 9/10,6/10,10/10,10/10,5/10,7/10,7/10,7/10,10/10,10/10,8/10,10/10. Homework is worth

  92. Physics

    How many years would it take the planet to orbit the sun. How do you calculate. All I have is, that the planet is 97 times farther from sun than earth or 97 Astronomical units Using Kepler's Law you find that the anser is 97^(1.5) years. You can estimate

  93. Analytical Chemistry

    Consider the titration of 100.0 mL 0.1 M KOH with 1.0 M HBr. Find the pH at the following volumes of acid (Va) added: Va= 0, 1, 10 and 10.1 mL.

  94. Chemistry

    Draw a titration curce of 25.0 mL of 0.100 M aluminum ion (pKa=5.14) with 0.100 M NaOH. I am familiar with the process of drawing titration curves, however, I have never done an example with an ion (aluminum ion) rather than an actual acid. If anyone can

  95. AP chem

    Consider the titration of 50.00 ml .250 M HBr with .100 M Ba(OH)2. What is the pH after the following additions of Ba(OH)2 to the 50 ml of hydrobromic acid? 0 ml. 15 ml. 25 ml. 50ml. 51ml.

  96. Chemistry

    Calculate the pH of a solution at the endpoint of a titration involving 25.00 mL of CH3COOH at unknown concentration, and 21.40 mL of 0.100 M NaOH

  97. Chemistry

    For the titration of 25.00 mL of 0.150 M HCl with 0.250 M NaoH, calculate (a) the initial pH; (b) the pH when neutralization is 50% complete; (c) the pH when neutralization is 100% complete; and (d) the pH when 1.00 mL of NaOH is added beyond the

  98. Chem 1A

    A 15.00 g sample of an ionic compound NaA, where A- is the anion of a weak acid, was dissolved in enough water to make 100.0 mL of solution and was then titrated with 0.100 M HCl. After 700.0 mL of HCl was added, the pH was 5.00. The experimenter found

  99. Chemistry

    1)What could have caused the impurity in the sodium hydroxide solution? 2)Why was it necessary to dilute the hydrochloric acid before carrying out the titration? This was a question from a titration practical in which we had to dilute HCL then use that

  100. Chemistry

    The student used the KHP in a subsequent titration experiment where he titrated 25.00 +/- 0.03 ml of the acid against an unknown solution of NaOH. The titration required 23.70 +/- 0.10 ml of the base. What is the concentration of NaOH?

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20