# Block A of mass 115 kg rests on a table with which it has a coefficient of limiting friction of 0.37. A light cord passes horizontally from Block A, without slipping, over a pullet of mass 34kg, radius 120 mm

48,299 results
1. ## physics

A 4.170 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is μs = 0.505 and the coefficient of kinetic friction is μk = 0.255. At time t = 0, a force F = 12.7 N is applied horizontally to the block.

asked by ashley on October 25, 2012
2. ## physics

a block of mass 3 kg rests on a smooth table and connected to another block of mass 2 kg, after passing over and ideal pulley, the block of mass 2 kg is released. how long does it take the block to travel 80 cm

asked by n on August 12, 2014
3. ## Physics

A block with mass M rests on a frictionless surface and is connected to a horizontal spring of force constant k, the other end of which is attached to a wall. A second block with mass m rests on top of the first block. The coefficient of static friction

asked by Jon on January 12, 2011
4. ## physics

A mass m = 11.0 kg rests on a frictionless table and accelerated by a spring with spring constant k = 4979.0 N/m. The floor is frictionless except for a rough patch. For this rough path, the coefficient of friction is μk = 0.46. The mass leaves the spring

asked by hater of physics on September 28, 2012
5. ## Physics

A block of mass m = 2.00 kg rests on the left edge of a block of mass M = 8.00 kg. The coefficient of kinetic friction between the two blocks is 0.300, and the surface on which the 8.00- kg block rests is frictionless. A constant horizontal force of

asked by Zac on July 25, 2012
6. ## physics

As shown in the figure, a block of mass M1 = 0.470 kg is initially at rest on a slab of mass M2 = 0.850 kg, and the slab is initially at rest on a level table. A string of negligible mass is connected to the slab, runs over a frictionless pulley on the

asked by Jimmy on October 17, 2011
7. ## Science

A 20 kg block rests on a rough horizontal table. A rope is attached to the block and is pulled with a force of 80 N to the left. As a result, the block accelerates at 2.5 m/s2. The coefficient of kinetic friction μk between the block and the table is ___

asked by Mason on April 21, 2020
8. ## Physics

A small cube of mass m1= 1.0 kg slides down a circular and frictionless track of radius R= 0.5 m cut into a large block of mass m2= 4.0 kg. The large block rests on a horizontal and frictionless table. The cube and the block are initially at rest, and the

asked by tyger2020 on December 11, 2018
9. ## Physics

A block of mass M rests on a block of mass M1 = 5.00 kg which is on a tabletop. A light string passes over a frictionless peg and connects the blocks. The coefficient of kinetic friction mk at both surfaces equals 0.330. A force of 46.0 N pulls the upper

asked by mike on September 23, 2018
10. ## physics

A block of mass M rests on a block of mass M1 = 5.00 kg which is on a tabletop. A light string passes over a frictionless peg and connects the blocks. The coefficient of kinetic friction mk at both surfaces equals 0.330. A force of 60.0 N pulls the upper

asked by Anonymous on September 28, 2015
11. ## physics

block A (mass 2.04kg) rests on a tabletop. It is connected by a horizontal cord passing over a light, frictionless pulley to a hanging block B (mass 3.00kg ). The coefficient of kinetic friction between block A and the tabletop is 0.215. After the blocks

asked by george on October 11, 2012
12. ## physics

a 2kg block of wood rests on a long table top. a 5 gram bullet moving horizontally with speed of 150m/s is shoot into the block and stricks in it then block slides 270cm along the table and stops. find a)speed of block after impact b)friction force between

asked by yonas on February 19, 2012
13. ## Physics

A small block of mass m rests on the sloping side of a triangular block of mass M which itself rests on a horizontal table. Assuming all surfaces are frictionless, determine the magnitude of the force ->F that must be applied to M so that m remains in a

asked by Physics on September 23, 2009

a block of mass 2.50 kg rests on a ramp. if the coefficient of static friction between the block and ramp is 0.350, what maximum angle can the ramp make with the horizontal before the block starts to slip down?

asked by JayCee on February 15, 2011
15. ## physics

Block A, with a mass of 50 kg, rests on a horizontal table top. The coefficient of static friction is 0.40. A horizontal string is attached to A and passes over a massless, ideal pulley as shown. What is the smallest mass of Block B that will start A

asked by santoki on March 21, 2014
16. ## science

A 4.240 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is μs = 0.455 and the coefficient of kinetic friction is μk = 0.255. At time t = 0, a force F = 11.6 N is applied horizontally to the block.

asked by suvee on September 29, 2018
17. ## physics

4 kg block rests on a smooth horizontal surface,upper surface of 4 kg is rough.A block of mass 2 kg is placed on its upper surface.The acceleration of upper block with respect to earth when 4 kg mass is pulled by a horizontal force of 30N?coefficient of

asked by zoha on June 4, 2014
18. ## Physics - Mechanics

A large box of mass M is at rest on a horizontal table whose surface is rough; the coefficient of static friction between the table and the block is μ. The box is connected by a taut string to a small block of unknown mass m, initially held horizontally

asked by Anonymous on March 14, 2015
19. ## Physics

A block of mass m1 = 4.1 kg rests on a frictionless horizontal surface. A second block of mass m2 = 1.7 kg hangs from an ideal cord of negligible mass that runs over an ideal pulley and then is connected to the first block. The blocks are released from

asked by Angie on January 25, 2010
20. ## Physics

Block A of mass 115 kg rests on a table with which it has a coefficient of limiting friction of 0.37. A light cord passes horizontally from Block A, without slipping, over a pullet of mass 34kg, radius 120 mm and radius of gyration 84mm, and down

asked by Alex on August 19, 2012
21. ## @ elena

In the figure the coefficient of static friction between mass (MA) and the table is 0.40, whereas the coefficient of kinetic friction is 0.28 ? part a) What minimum value of (MA) will keep the system from starting to move? part b) What value of(MA) will

asked by ally on May 8, 2012
22. ## Physics

A 5.00-kg block is placed on top of a 12.0-kg block that rests on a frictionless table. The coefficient of static friction between the two blocks is 0.650. What is the maximum horizontal force that can be applied before the 5.00-kg block begins to slip

asked by John on November 10, 2014
23. ## Physics

A 4.500 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is μs = 0.455 and the coefficient of kinetic friction is μk = 0.155. At time t = 0, a force F = 12.4 N is applied horizontally to the block.

asked by Mira on October 29, 2014
24. ## high school physics static friction

The system shown below is in equilibrium. Using the fact that block A is placed on a table, has a normal force of 40.2 N and it is not moving, what is the coefficient of static friction on block A? I know you can't answer this but if you have any

asked by Jess on December 8, 2010
25. ## Physics

I have a question 26. A box weighing 85 N rests on a table. A rope tied to the box runs vertically upward over a pully and a weight is hung form the other end. Detrmine the force that the table exerts on the box if the weight hanging on the other side of

asked by Physics on August 25, 2009
26. ## physics

A block of mass m= 100kg rests on a level ground. With what force, parallel to the ground, must you push the block so that it is just ready to start sliding? The coefficient of static between the block and ground is 0.40.

asked by Dail on May 4, 2010
27. ## Physics for Life science

1. A block of mass m=100kg rests on a level ground. With what force, parallel to the ground, must you push the block so that it is just ready to start sliding? The coefficient of static friction between the block and the ground is 0.40.

asked by TangenT on May 3, 2010
28. ## physics

A 11.1-kg block rests on a horizontal table and is attached to one end of a massless, horizontal spring. By pulling horizontally on the other end of the spring, someone causes the block to accelerate uniformly and reach a speed of 3.12 m/s in 1.17 s. In

asked by Michelle on November 13, 2012
29. ## Physics

There is a block resting on a table attached to a hanging mass around a pulley. Assume a value of g = 10 m/s2. If there is no friction, and the mass on the table has a value of 5.0 kg and the hanging mass has a value of 1.0 kg, what is the value of the

asked by Emily on October 28, 2014
30. ## Physics Dynamics

A 4-kg block is connected by means of a massless rope to a 2-kg block. What is the magnitude of the acceleration if the coefficient of kinetic friction between the 4-kg block and the surface is 0.20? Note : The 4kg block is on the table, the pulley is on

asked by Anonymous on February 8, 2015
31. ## Physics Classical Mechanics Help ASAP

A small cube of mass m1= 1.0 kg slides down a circular and frictionless track of radius R= 0.6 m cut into a large block of mass m2= 4.0 kg as shown in the figure below. The large block rests on a horizontal and frictionless table. The cube and the block

asked by Anonymous on January 10, 2014
32. ## physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130N ) to a wall. A second block, of mass = 1.35 , rests on top of the block . The coefficient of static friction between the two blocks is 0.40. What is the

asked by steve on January 24, 2013
33. ## physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130N ) to a wall. A second block, of mass = 1.35 , rests on top of the block . The coefficient of static friction between the two blocks is 0.40. What is the

asked by steve on January 24, 2013
34. ## Physics

A block with mass M = 5.00 kg rests on a frictionless table and is attached by a horizontal spring (k = 130 N/m) to a wall. A second block, of mass m = 1.25 kg rests on top of M. The blocks are displaced by 10 cm then released. If the coefficient of static

asked by Sue on May 27, 2014
35. ## Physics

A 5.1- kg concrete block rests on a level table. A 3.4- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.3 m/s2, what is the coefficient of friction between the

asked by Alex on March 24, 2014
36. ## Physics

mass of 4.00 kg rests on a rough horizontal table. The coefficient of static friction between the block and the table is 0.54. The block is attached to a hanging mass by a string that goes over a smooth pulley, as shown in the diagram. Determine the

asked by Anonymous on December 11, 2015
37. ## Physics

A 5.7- kg concrete block rests on a level table. A 4.0- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.0 m/s2, what is the coefficient of friction between the

asked by Steve on February 21, 2012
38. ## Physics

A 5.7- kg concrete block rests on a level table. A 4.0- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.0 m/s2, what is the coefficient of friction between the

asked by Steve on February 21, 2012
39. ## Physics

A 5.0- kg concrete block rests on a level table. A 3.7- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.0 m/s2, what is the coefficient of friction between the

asked by Jordan on February 21, 2015
40. ## Physics

A 5.7- kg concrete block rests on a level table. A 4.0- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.0 m/s2, what is the coefficient of friction between the

asked by Eva on February 21, 2012
41. ## physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130 ) to a wall. A second block, of mass = 1.35 , rests on top of . The coefficient of static friction between the two blocks is 0.40. What is the maximum

asked by steve on January 24, 2013
42. ## physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130 ) to a wall. A second block, of mass = 1.35 , rests on top of . The coefficient of static friction between the two blocks is 0.40. What is the maximum

asked by victor on January 24, 2013
43. ## Physics

A 13 kg block(mA) rests on a level table. The coefficient of kinetic friction between the block and the table is .15. A string of negligible mass is attached to the block. The string, which is perfectly horizontal, passes through a frictionless pulley at

asked by Anonymous on December 19, 2016
44. ## physics

A heavy wooden block rests on a flat table and a high-speed bullet is fired horizontally into the block, the bullet stopping in it. How far will the block slide before coming to a stop? The mass of the bullet is 10.5 g, the mass of the block is 10.5 kg the

asked by esther on March 10, 2010
45. ## physics

A heavy wooden block rests on a flat table and a high-speed bullet is fired horizontally into the block, the bullet stopping in it. How far will the block slide before coming to a stop? The mass of the bullet is 10.5 g, the mass of the block is 10.5 kg the

asked by Anonymous on March 10, 2010
46. ## Physics

A heavy wooden block rests on a flat table and a high-speed bullet is fired horizontally into the block, the bullet stopping in it. How far will the block slide before coming to a stop? The mass of the bullet is 9.5 g, the mass of the block is 10.5 kg, the

asked by jonathan on November 6, 2013
47. ## Physics

A wooden block with mass 0.26 kg rests on a horizontal table, connected to a string that hangs vertically over a friction-less pulley on the table's edge. From the other end of the string hangs a 0.12 kg mass. A) What minimum coefficient of static friction

asked by Linday on February 14, 2017
48. ## Physics

A wooden block with mass 0.26{\rm kg} rests on a horizontal table, connected to a string that hangs vertically over a friction-less pulley on the table's edge. From the other end of the string hangs a 0.20{\rm kg} mass. What minimum coefficient of static

asked by Nichole on October 18, 2012
49. ## Physics

Block A is 4.5 kg and Block B is 2.25 kg. a. determine the mass of block C that must be placed on block A to keep it from sliding if the coefficient of static friction between block A and the table is 0.2 b. If the coefficient of kinematic friction between

asked by Diana on February 29, 2016
50. ## physics

A block of mass m1 = 13.5 kg rests on a wedge of angle θ = 27∘ placed over a table.. An inextensible string is attached to Block M1, passes over a frictionless pulley at the top of the wedge, and is then attached to another block of mass M2 = 3 kg. The

asked by ss01 on October 1, 2013
51. ## phisic

A block of mass m1 = 26 kg rests on a wedge of angle θ = 48∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by al1974 on October 5, 2013
52. ## PHYSICS

A block of mass m1 = 28 kg rests on a wedge of angle θ = 53∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by sel on January 28, 2014
53. ## physics

A block of mass m1 = 28 kg rests on a wedge of angle θ = 47∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by matt on October 9, 2013
54. ## Physics

A block of mass m1 = 28 kg rests on a wedge of angle θ = 53∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by sel on January 28, 2014
55. ## physics

A block of mass m1 = 28 kg rests on a wedge of angle θ = 53∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by sel on January 28, 2014
56. ## physics

A block of mass m1 = 28 kg rests on a wedge of angle θ = 47∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by Anonymous on October 9, 2013
57. ## Physics

A block of mass m1 = 27 kg rests on a wedge of angle θ = 54∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by Anonymous on October 10, 2013
58. ## physics

A block of mass m1 = 28 kg rests on a wedge of angle θ = 47∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

59. ## physics

A block of mass m1 = 28 kg rests on a wedge of angle θ = 47∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

60. ## PHYSICS

A block of mass m1 = 28 kg rests on a wedge of angle θ = 47∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by matt on October 9, 2013
61. ## physics

A block of mass m1 = 28 kg rests on a wedge of angle θ = 47∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by Anonymous on October 8, 2013
62. ## physics (elena)

A block of mass m1 = 28 kg rests on a wedge of angle θ = 47∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by Anonymous on October 9, 2013
63. ## physics

A block of mass m1 = 28 kg rests on a wedge of angle θ = 47∘ which is itself attached to a table (the wedge does not move in this problem). An inextensible string is attached to m1, passes over a frictionless pulley at the top of the wedge, and is then

asked by Anonymous on October 8, 2013
64. ## physics

The Figure shows two blocks, block 1 and block 2, held in equilibrium by a massless, unstretchable string. The mass of block 1 is 14.2 kg, the mass of block 2 is 6.2 kg, and the angle theta is 26o The system begins to slip if any additional mass is added

asked by anonymus on September 10, 2018
65. ## physics

The coefficient of static friction is 0.604 between two blocks. The coefficient of kinetic friction between the lower block and the floor is 0.115. Force F causes both blocks to cross a distance of 3.93 m, starting from rest. What is the least amount of

asked by Anonymous on September 27, 2009
66. ## Physics

A wooden block of mass 29.0 kg sits on a horizontal table. A wire of negligible mass is attached to the right side of the block and goes over a pulley (also of negligible mass, and frictionless), where it is allowed to dangle vertically. When a mass of

asked by Bob on January 20, 2012
67. ## Physics

The system shown in the following figure is in static equilibrium. Find the frictional force exerted on block (m1) given that the mass of block (m1) is 8.90 kg, the mass of block (m2) is 2.59 kg, and the coefficient of static friction between block (m1)

asked by Eric Sowell on June 9, 2016
68. ## physics

A 4.85-kg block is placed on top of a 12.0-kg block that rests on a frictionless table. The coefficient of static friction between the two blocks is 0.645. What is the maximum horizontal force that can be applied before the 4.85-kg block begins to slip

asked by zach on November 7, 2011
69. ## physics

A Block has a mass of 50.0 kilograms. the coefficient of static friction between the block and the level floor on which it rests is 0.428 A horizontal force of 618 newtons is applied to the block to the right, as shown. will the block move?

asked by Jen on May 24, 2012
70. ## Physics

Block A has a mass of 2.60 kg and rests on a smooth (frictionless) table and is connected to block B, which has a mass of 2.40 kg, after passing over an ideal pulley, as shown. Block B is released from rest. What is the acceleration of the masses?

asked by Anthony on September 30, 2012
71. ## Physics

A 6.99-kg block is placed on top of a 12.9-kg block that rests on a frictionless table. The coefficient of static friction between the two blocks is 0.565. What is the maximum horizontal force that can be applied before the 6.99-kg block begins to slip

asked by Kyler G. on October 6, 2014
72. ## Physics

A 7.40-kg block is placed on top of a 12.5-kg block that rests on a frictionless table. The coefficient of static friction between the two blocks is 0.610. What is the maximum horizontal force that can be applied before the 7.40-kg block begins to slip

asked by Amelia on October 23, 2017
73. ## Physics

When the three blocks in the figure below are released from rest, they accelerate with a magnitude of 0.370 m/s2. Block 1 has mass M, block 2 has 5M, and block 3 has 5M. What is the coefficient of kinetic friction between block 2 and the table? block 1 is

asked by Will on November 18, 2010
74. ## physics

A 4 kg wooden block rest on a table. the coefficient of friction between the block and the table is .40. a 5kg mass is attached to the block by a horizontal string passed over a frictionless pulley of neglible mass what is the acceleration of the block

asked by Tori carr on February 2, 2010
75. ## physics

A 6.110 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is μs = 0.455 and the coefficient of kinetic friction is μk = 0.255. At time t = 0, a force F = 16.8 N is applied horizontally to the block.

asked by lacie on December 10, 2014
76. ## Physics (dynamics)

A 47.0 kg slab rests on a frictionless floor. A 18.0 kg block rests on top of the slab. The static coefficient of friction between the block and the slab is 0.50, while the kinetic coefficient of friction is 0.40. The top block is acted upon by a force of

asked by Andrew on March 10, 2012
77. ## Physics

A 1kg block of wood is moving with a velocity of 10 m/s on top of a table. The coefficient of kinetic friction between the block of wood and the table is 0.1. The block of wood is a cube with sides of 12 cm. How far does the block move before coming to a

asked by Carolyn on March 19, 2015
78. ## physics

A 1kg block of wood is moving with a velocity of 10 m/s on top of a table. The coefficient of kinetic friction between the block of wood and the table is 0.1. The block of wood is a cube with sides of 12 cm. How far does the block move before coming to a

asked by carolyn on March 23, 2015
79. ## Physics

Consider the diagram of the box and bucket. If the coefficient of static friction is 0.5 and the coefficient of kinetic friction is 0.3, find the maximum mass of the bucket in order for the system to be in static equilibrium. If the block was given a

asked by Caitlin on January 1, 2011
80. ## Physics

The blocks A and B are connected by a piece of spring. Block B rests on an inclined plane of 40° and block A hangs vertically. The coefficient of kinetic friction between block A and the inclined plane is 0.29. Calculate the acceleration of the system if

asked by Alex on February 7, 2015
81. ## Physics

Two objects are connected by a string with a mass less, friction less pulley. The coefficient of friction is .298. The block on the table is 4 kg. What must the mass of the hanging block be so that the block on the table will move with a constant speed?

asked by Elle on November 19, 2012
82. ## Physics

A force of 20N applied parallel to the surface of a horizontal table,is just sufficient to make a block of mass 4kg move on the table.calculate the coefficient of friction between the block and the table.

asked by Jeremiah on February 11, 2012
83. ## physics

a force of 20n applied parallel to the surface of a horizontal table is just sufficient to make a block of mass 4.kg move on the table caculate thd coefficient of friction between the block and the table

asked by fawaz on October 26, 2011
84. ## physics

a force of 20n applied parallel to the surface of a horizontal table is just sufficient to make a block of mass 4.kg move on the table caculate thd coefficient of friction between the block and the table

asked by fawaz on October 26, 2011
85. ## physics

There is a 2kg block resting on a table with a 5kg block attached to the right hanging off the edge of the table and a 4 kg block attached to the left also hanging off the table find the acceleration of the 5 kg block if coefficient of static equals the

asked by joe on October 10, 2013
86. ## Physics

Suppose a hanging 1.0 kg lab mass is attached to a 4.0 kg block on the table. a. If the coefficient of kinetic friction, uk is 0.20, what is the acceleration of the block? b. What would be the minimum value of the coefficient of static friction, Us, in

asked by jdajaljk on January 28, 2011
87. ## physics mechanics

A 2 kg mass rests on a horizontal table with a light spring with a force constant of 200 Nm-1 attached to it. The coefficient of static friction between the mass and the table is 0.7 and the coefficient of kinetic friction is 0.5. How far must the spring

asked by njood on October 26, 2013
88. ## Physics-Atwood's Machine

A 5 kg block rests on a horizontal surface. Determine the horizontal force required to accelerate the block at 3 m/s^2. The frictional coefficient is 0.5. Fnet=mass(accer.) FH=5kg (3m/s^2)= 15N I don't know what to make of the frictional coefficient

asked by Tristan on November 13, 2014
89. ## physics

When the three blocks in the figure are released from rest, they accelerate with a magnitude of 0.900 m/s2. Block 1 has mass M, block 2 has 2M, and block 3 has 2M. What is the coefficient of kinetic friction between block 2 and the table?

asked by krals on March 17, 2016
90. ## mechanics

Q2. A block of massmrests on the left edge of a block of larger massM. The coefficient of kinetic friction between the two blocks is , and the surface on which the larger block rests is frictionless. A constant horizontal force of magnitude F is applied

asked by sana on December 9, 2010
91. ## Physics

A block of mass m1 is connected to an empty bucket of mass 1.35 kg by a cord over a frictionless pulley. The coefficient of the static friction between the table and the block is 0.45 and the coefficient of kinetic friction between the table and the block

asked by Mawuli on May 2, 2011
92. ## PHYSICS

In a laboratory experiment, a bullet of mass 47.0 g is shot horizontally into a stationary block of totara of mass 3.50 kg that hangs from a light string. The bullet is then embedded a distance d = 3.50 cm into the block and the combined block-bullet

asked by Gary on March 28, 2011
93. ## Physics - Mechanics

A large box of mass M is at rest on a horizontal table whose surface is rough; the coefficient of static friction between the table and the block is μ. The box is connected by a taut string to a small block of unknown mass m, initially held horizontally

asked by Anonymous on March 13, 2015
94. ## physics

an aluminium of mass 2.1 kg rests on a steel platform. A horizontal force of 15N is applied to block(a) given the coefficient of limiting friction is 0.61 will the block move? (b)if it moves what will be its acceleration?

asked by Maryam on January 21, 2014
95. ## Physics

block slides across table with initial speed of 8 m/s coefficient of friction between block and table is .5 and table is 4 m long and 1.2 m high determine how far the block lands from the base of the table

asked by Anonymous on November 7, 2014
96. ## Physics for Life science

1. A block of mass m=100kg rests on a level ground. With what force, parallel to the ground, must you push the block so that it is just ready to start sliding? The coefficient of static friction between the block and the ground is 0.40.

asked by TangenT on May 3, 2010
97. ## Physics

A block of mass 0.4 kg rests on the inclined surface of a wedge of mass 1.7 kg. The wedge is acted upon by a horizontal force F~ and slides on a frictionless surface. The acceleration of gravity is 9.81 m/s2. If the coeﬃcient of static friction between

asked by Amanda and Leah on October 8, 2012
98. ## physics

the system is in static equilibrium. The coefficient of static friction between the block and the table's surface is = 1/3. The mass of the block that is hanging down is n1 Kg. The tangent of the angle shown in the figure is tan theta = n2. What is the

asked by frank on January 14, 2012
99. ## Physics

A block of mass 0.40 kg rests on the inclined surface of a wedge of mass 7.0 kg. The wedge is acted on by a horizontal force F with arrow and slides on a frictionless surface. a)If the coefficient of static friction between the wedge and the block is µs =

asked by John Smith on October 17, 2014
100. ## math

A block of mass M1 = 2.7 kg rests on top of a second block of mass M2 = 4.7 kg, and the second block sits on a surface that is so slippery that the friction can be assumed to be zero (see the figure below). (a) If the coefficient of static friction between

asked by Hei on August 28, 2013