# A sample of solid KCl (potassium chloride) weighing 0.500 g is mixed with an unweighed sample of solid MgCl2 (magnesium chloride) and the mixture is then completely dissolved in water to form a clear solution. An aqueous solution of AgNO3

30,284 results
1. ## chemistry

A sample of solid KCl (potassium chloride) weighing 0.500 g is mixed with an unweighed sample of solid MgCl2 (magnesium chloride) and the mixture is then completely dissolved in water to form a clear solution. An aqueous solution of AgNO3 (silver nitrate)
2. ## AP Chem

A sample of solid KCl (potassium chloride) weighing 0.500 g is mixed with an unweighed sample of solid MgCl2 (magnesium chloride) and the mixture is then completely dissolved in water to form a clear solution. An aqueous solution of AgNO3 (silver nitrate)
3. ## Chemistry

A 10.00 gram solid sample consisting of a mixture of sodium chloride and potassium sulfate is dissolved in 100.0 mL of water is combined with another 200.0 mL solution that contains excess aqueous lead(II) nitrate. Upon mixing the two solutions, a solid
4. ## chemistry

treatment of a 0.400g sample of impure potassium chloride with an excess of AgNO3 resulted in the formation of 0.733g of AgCl. calculate the percentage of KCl in the sample. show balanced equations in support of your answer
5. ## Chemistry

Question: a sample is to be analyzed for its chloride content by the precipitation and weighing of silver chloride. what mass of the sample should be used so that the mass of the precipitate will be equal to the percent of chloride in the sample. How would
6. ## Chemistry

A sample of a mixture containing only sodium chloride (NaCl) and potassium chloride (KCl) has a total mass of 4.000g. When this sample is dissolved in water and excess silver nitrate is added a white precipitate (AgCl) forms. After filtration and drying,
7. ## Chemistry

A sample of a mixture containing only sodium chloride (NaCl) and potassium chloride (KCl) has a total mass of 4.000g. When this sample is dissolved in water and excess silver nitrate is added a white precipitate (AgCl) forms. After filtration and drying,
8. ## chemistry

experiment: Gravimetric determination of moisture in fertilizer samples 1. What are the advantages of weighing by difference to direct weighing when using an analytical balance? 2. Why are the samples grinded before drying in the oven? Weighing by
9. ## Chemistry

1) Calculate the amount of sodium chloride, NaCL (mol wt 58.44) and potassium chloride; KCL (Mol wt 74.56) needed to prepare 500 ml of 1.25 NaCL/10 mM kcl solution dilutions in water.
10. ## chemistry help!

Potassium has an atomic mass of 39.10amu. a sample of potassium is made up of isotopes potassium-39 (mass=38.964) and potassium-41(mass =40.962 amu). What percentage of the potassium sample is potassium-39? what percent of the sample is potassium-41?
11. ## chemistry

a mixture containing only sodium chloride and potassium chloride has a mass of 4 g. when this sample is dissolved in water and excess silver nitrate is added a white solid forms. after filreation and drying the solid silver chloride has the mass of
12. ## Chemestry

A 5.000g sample of a dry mixture of potassium hydroxide, potassium carboate and potassium chloride is reacted with 0.100 L of 2.00-molar HCl solution. A 249.0 mL sample of dry carbon dioxide gas, measured at 22.0 degree Celsius and 740.0 torr, is obtained
13. ## chemistry

can some one help me with a few chem questions please. A chunk of iron weighs 4.32 g. a) How many iron atoms are there in this sample? 55.85 g Fe = 1.00 mol Fe = 6.022 x 1023 atoms Fe b) How many moles of iron are there in this sample? 2. . You have a
14. ## Chemistry

A sample of the compound prepared in this experiment, weighing .1021g, is dissolved in HNO3 and diluted to a volume of 100mL. A 10mL aliquot of that solution is mixed with 10mL 6 M NH3. The [Cu(NH3)4 2+] in the resulting solution is 5.16x10^-3 M. How many
15. ## chemistry

Not sure how to do any of this. Please help!!! A sample of the compound prepared in this experiment, weighing .1021g, is dissolved in HNO3 and diluted to a volume of 100mL. A 10mL aliquot of that solution is mixed iwth 10mL 6 M NH3. The [Cu(NH3)4 2+] in
16. ## Chemistry

A sample of the compound prepared in this experiment, weighing .1021g, is dissolved in HNO3 and diluted to a volume of 100mL. A 10mL aliquot of that solution is mixed iwth 10mL 6 M NH3. The [Cu(NH3)4 2+] in the resulting solution is 5.16x10^-3 M. How many
17. ## Chemistry

A compound contains only potassium and iodine. A sample weighing 12.3 g of this compound contained 2.90 g of potassium. How many grams of iodine would there be in another sample of this compound containing 9.56 g of potassium? Do I find the mol of each
18. ## chemistry

Which of the following statements describes why ion exchange of 99% SiO2 - 1% B2O3 in a salt bath of molten postassium chloride (KCl) is not an effective way to increase the surface strength of the glass sample? a) The ion exchange works correctly, however
19. ## chemistry

Which of the following statements describes why ion exchange of 99% SiO2 - 1% B2O3 in a salt bath of molten postassium chloride (KCl) is not an effective way to increase the surface strength of the glass sample? The ion exchange works correctly, however
20. ## SCIENCE

From the following data ,calculate the percentage of KCl in sample of chloride weight of the sample 0.1865, volume of AgNOS required 26.50mL and Ag of AgNO3 =0.008700gram
21. ## Chemistry

39.8g of a mixture of Potassium chloride, KCl, and Potassium trioxochlorate (v) KClO3, were heated to a constant mass.If the residue weighed 28.9g, what was the percentage of Potassium chloride in the mixture? (O=16,Cl=35.5,K=39)
22. ## Chem Quanti

An organic pesticide (MW 183.7) is 8.43% Cl. A 0.627-g sample containing the pesticide plus inert material containing no chloride was decomposed with metallic sodium in alcohol. The liberated chloride ion was precipitated as AgCl weighing 0.0831 g.
23. ## gravimertic prob

an organic pesticide (mw 183.7) is 8.43% cl. a 0.627g sample containing the pesticide plus inert material containing no chloride was decomposed with metallic sodium in alcohol. the liberated chloride ion was precipitated as agcl weighing 0.0831g. calculate
24. ## Chemistry

A student was given a 2.45 g of impure potassium sulfate (K2SO4) sample. He dissolved this sample in 100 mL of water first and then added some barium chloride (BaCl2) solution. A 2.15 g of BaSO4 precipitate was obtained at the end of the reaction. What is
25. ## chemistry

write a balanced chemical reaction for the reaction of aqueous magnesium chloride with aqueous potassium phosphate to form solid magnesium phosphate (Mg3(PO4)2) and aqueous potassium chloride (KCl). Indicate the physical states of the reactants and
26. ## chem

A solution contains 4.60 g KCl in 179 mL of solution. The density of the KCl solution is 1.11 g/mL What is the percent (m/m) for the potassium chloride solution? What is the molarity, M, for the potassium chloride solution? need help pls
27. ## chemistry

The traditional method of analyzing the amount of chloride ion present in a sample was to dissolve the sample in water and then slowly add a solution of silver nitrate. Silver chloride is very insoluble in water, and by adding a slight excess of silver
28. ## CHEM

A 3.5g sample of potassium chloride(KCl)is dissolved in 10mL of water.The resulting solution is the added to 60mL of a 0.5M CaCl2 soltion. Assuming that the volume are additive,calculate the molar concentration and %w/v of each ion present in final
29. ## Chemistry

At STP potassium chlorate (KClO3) decomposes to produce solid potassium chloride (KCL) and oxygen gas (O2) according to the balanced chemical equation: 2KClO3(s)->2KCl(s)+3O2(g) What volume of oxygen gas, measured at 40 degrees celsius and 85.4 kPa,
30. ## chemistry

a sample of indium chloride is known to be contaminated with sodium chloride. The contaminated sample weighs 2.87 g. When the contaminated sample is treated with excess AgNO3(aq), 5.79 grams of AgCl(s) are obtained. What is the percentage by mass of InCl3
31. ## Chemistry

A 2.764 g sample containing only iron and aluminum metal was treated with acid to form Al(+3) and Fe(+2). The sample was then titrated with a potassium dichromate solution (only the Fe(II) will react with the dichromate). The sample was found to be
32. ## chem quantity

a sample of soil containing hydrated barium chloride potassium chloride plus inert material weighd 0.8076g. tha sample was then dissolvd in water n treated with silver nitrate.tha resulting precipitate was collectd n found to weigh 0.5846g. calculate tha
33. ## chemistry

. How many grams of potassium chloride, KCl, are needed to prepare 0.630 L of a 2.50 M solution of potassium chloride? (4.0 points) (Points :4) 1.575 M 117 g 2.54 m 23.19 g
34. ## chemistry

treatment of a 0.3203g sample of impure soduim chloride with an excess of AgNo3 resulted in the formation of 0.7331g of AgCl. how many grams of sodium chloride were in the sample? What is the weight percentage of NaCl in the sample?
35. ## chemistry

treatment of a 0.3203g sample of impure soduim chloride with an excess of AgNo3 resulted in the formation of 0.7331g of AgCl. how many grams of sodium chloride were in the sample? What is the weight percentage of NaCl in the sample?
36. ## chemistry

treatment of a 0.3203g sample of impure soduim chloride with an excess of AgNo3 resulted in the formation of 0.7331g of AgCl. how many grams of sodium chloride were in the sample? What is the weight percentage of NaCl in the sample?
37. ## Chemistry

If the density of ocean water at a depth of 1.00 x 104 m is 1.071 g/mL and if 20.0 g of water at that depth contains 197mg of potassium chloride, what is the molarity of potassium chloride in the sample? It wants it in M.

calculate the concentration of silver nitrate in mol/L M x V =0.2 average Vw in ml of 2.23 2.26 2.43 MxVw = Mwx20 Mw=? mol/L chloride in water sample = mmol/L? =?g/L chloride in sample =?ppm chloride in water sample
39. ## Chemistry

If the density of ocean water at a depth of 1.00 x 10^4 m is 1.071 g/mL and if 27.0 g of water at that depth contains 197 mg of potassium chloride, what is the molarity of potassium chloride in the sample?
40. ## Chem

The following state were collected for determining the concentration of suspended solids in a water sample. (D= 1.01 g/mL). Express all calculated data with the correct number of significant figures. Volume of sample (mL): Trial 1: 25.0 trial 2: 20.0 trial
41. ## chem

The following state were collected for determining the concentration of suspended solids in a water sample. (D= 1.01 g/mL). Express all calculated data with the correct number of significant figures. Volume of sample (mL): Trial 1: 25.0 trial 2: 20.0 trial
42. ## chemistry

15.45 grams of solid potassium chlorate decomposes when heated to form potassium chloride and oxygen gas. assuming 100% yeild how many grams of solid potassium will be produced?
43. ## Chemistry

The quantity of Cl- in a water supply is determined by titrating the sample with Ag+. What mass of chloride ion is present in a 10,0g sample of the water if 20.2 ml of 0.100 M Ag+ is required to react with all the chloride in the sample?
44. ## chemistry

An impure silver sample weighing 0.1652g reacts with diluted HNO3, forming the add HCl, a white precipitate that weighed 0.0911 g of silver chloride. What degree of purity of silver in the sample?
45. ## qnt/351

Which of the following statements about the two sample sizes is NOT true? Assume thepopulation standard deviations are equal A. Sample A = 11; sample B = 13 B. Sample A = 12; sample B = 14 C. Sample A = 13; sample B = 13 D. Sample A = 10; sample B = 16
46. ## chemistry

calculate3 the concentrationof chloride in water sample Mw using this equation mol Ag+ = 1= MxVwx10-3 = MxVw mol Cl- 1 Mwx20.00x10-3 Mwx20 so M x Vw=Mw x20 or Mw= M x Vw 20 Mw= ? mol/L chloride in water sample= ? mmol/L Mw=? g/L chloride in water sample
47. ## Analytical chemistry

A 25 ml sample of household bleach was diluted to 500 ml in a volumetric flask. An unmeasured excess of potassium iodide was aded to a 20 ml aliquot of the diluted sample; the iodine liberated in the reaction: OCl- + 2I- -> I2 + Cl- + H2O required 34.5
48. ## CHEM

The following data were collected for determining the concentration of suspended solids in a water sample. (D= 1.01 g/mL). Express all calculated data with the correct number of significant figures. Volume of sample (mL): Trial 1: 25.0 trial 2: 20.0 trial
49. ## Chemistry

a change in pressure would have the greatest effect on the solubility of a A. solid in a liquid B. gas in a liquid C.liquid in a liquid D.liquid in a solid in an aqueous solution of potassium chloride, the solute is A. Cl B. KCl C. H20 D. K B for the
50. ## chemistry

In which of the following ways would you change the glass sample to make the ion exchange more efficient? a)Change the composition of the glass to increase the proportion of B2O3. b)Change the composition of the glass to add Na2O, Li2O, or MgO. c)Change
51. ## Ap Chemistry

a mixture contains only sodium chloride and potassium chloride. a .1586-g sample of the mixture was dissolved in water. it took 22.90 mL of 0.1000 M AgNO3 to completely precipitate all the chloride present. what is the composition(by Mass percent) of the
52. ## biochem

Two samples of double-stranded DNA have been prepared. Nucleotide analysis reveals that sample 1 is found to be 21% A, while sample 2 is 26% G. Knowing this, which of the following statements is true? Sample 1 has a higher AT content than Sample 2. Sample
53. ## Chemistry

Hi! I am doing this chemistry lab of solubility curve of a solid investigation and this is for KCl. The purpose of this lab is to investigate the relationship between the solubility of potassium chloride and the temperature of its solution and to create a
54. ## Chemistry

Hi! I am doing this chemistry lab of solubility curve of a solid investigation and this is for KCl. The purpose of this lab is to investigate the relationship between the solubility of potassium chloride and the temperature of its solution and to create a
55. ## chemistry

KCl(s) → K+(aq) + Cl‾ (aq) Solid KCl dissolves as shown in the above equation. A 6.60 g sample of KCl was dissolved in 42.3 g of water. The initial temperature of the water was 21.90°C. After the compound dissolved, the temperature of the
56. ## CHEM

I posted a question earlier, and i'm still abit confused. What is the reaction between potassium and aqueous sodium chloride? I was told that the products are KOH, H2, and KCl. But shouldn't the reaction be a displacement reaction? Since Potassium is more
57. ## Chemistry

A 0.4584 g sample of impure zinc chloride, ZnCl2, FW = 136.3 g/mole, was dissolved in water and excess silver nitrate was added to the solution. The mass of the dry silver chloride, AgCl, FW = 143.3 g/mole, produced was 0.8564 g. The balanced precipitation
58. ## chemistry

problem 2. a sample of calcium chloride weighs 1.64g. it is dissolved in water and silver nitrate solution added.a precipitate of silver chloride weighing 4.24g was formed.determine the percentage composition of each element. the simple formular of calcium
59. ## chemistry

Which of the following statements describes why ion exchange of 99% SiO2 - 1% B2O3 in a salt bath of molten postassium chloride (KCl) is not an effective way to increase the surface strength of the glass sample? The ion exchange works correctly, however
60. ## chemistry

Which of the following statements describes why ion exchange of 99% SiO2 - 1% B2O3 in a salt bath of molten postassium chloride (KCl) is not an effective way to increase the surface strength of the glass sample? a -The ion exchange works correctly, however
61. ## chemistry

Which of the following statements describes why ion exchange of 99% SiO2 - 1% B2O3 in a salt bath of molten postassium chloride (KCl) is not an effective way to increase the surface strength of the glass sample? a)The ion exchange works correctly, however
62. ## chem

a) Potassium-40 undergoes three different modes of radioactive decay (Beta decay, Positron decay, and Electron Capture decay). Write balanced nuclear reactions for each of these decay modes. Are the products stable (not radioactive)? b) Potassium-40 has a
63. ## chemistry

For the determination of the quantity of chloride in a physiological serum sample by the Volhard method, a sample of 25.00 ml was treated with 50.00 ml of 0.110 mol/L Silver nitrate solution and the excess of silver ions was titrated with 17.00 ml of a
64. ## Chemistry

The Cu2+ ions in this experiment are produced by the reaction of 1.0g of copper. Information already found out .016 mol Cu2+ produced Overall reaction is Cu2+(aq)+Cl-(aq)+Cu(s)=2 CuCl(s) Maximum mass of CuCl that can be prepared from the reaction sequence
65. ## chemistry

An aqueous solution is 0.273m kcl. What is the molar concentration of potassium chloride, kcl? The density of the solution is 1.011 x 1 1000 g/L Who helps me
66. ## chemistry

Inglês Português Espanhol For the determination of the quantity of chloride in a physiological serum sample by the Volhard method, a sample of 25.00 ml was treated with 50.00 ml of 0.110 mol/L Silver nitrate solution and the excess of silver ions was
67. ## Science

How would you obtain a sample of the salt potassium chloride?
68. ## Chemistry

A given solution contained potassium chloride, KCl, and hydrochloric acid. 25 cm3 of it needed 24.80 cm3 of 0.0986 M sodium hydroxide solution to neutralize the acid, and the neutral solution then required 23.55 cm3 of 0.2 M silver nitrate, AgNO3, solution
69. ## Chemisty 20

A sample of water was known to contain chloride ions. To determine the concentration of chloride ions in the water sample, a student added a solution of silver nitrate to 500mL of the water. 1.26g of silver chloride percipitate formed. What was the
70. ## Chemistry

A sodium hydroxide sample is contaminated with sodium chloride. A 0.240 gram sample of this impure sample is dissolved in water and titrated with 21.50 mL of 0.130 M H2C2O4. Calculate the percent sadium hydroxide in the impure sample [(mass of NaOH in
71. ## chemistry

Consider a mixture of the two solids BaCl2 * 2H2O (FW=244.26 g/mol) and KCl (FW=74.551 g/mol). When the mixture is heated to 160 C for 1 hour, the water of crystallization is driven off: BaCl2 * 2 H2O (s)  BaCl2(s) + 2 H2O(g) A sample originally
72. ## Chemistry

How many grams of potassium chlorate, KClO3(s) must decompose to produce potassium chloride, KCl(s), and 1.45 grams of oxygen gas?
73. ## Chemistry

Consider the thermal decomposition of potassium chlorate. 2 KClO3(s) ---> 2 KCl(s) + 3 O2(g) A mixture containing KCl and KClO3 weighing 1.80 g was heated producing 1.40 x 102 mL of O2 gas at STP. What percent of the original mixture was KClO3?
74. ## Chem

The following results were obtained when a sample of pineapple juice was analyzed to determine its vitamin C content. A 19.8 mL sample of pineapple juice was placed in a flask with 20 ml of 0.5 M H2SO4, 1.0 g of potassium iodide, KI, and 25.00 mL of
75. ## Science

To determine the mass percentage of an iron sample, the dissolved sample [iron exists at the start as iron(II)] was titrated with potassium permanganate (permanganate forms manganese(IV) oxide.)If 22.25 cubic cm of 0.0123 potassium permanganate, what is
76. ## chemistry

A glass of composition 85% SiO2 - 15% K2O is to be surface strengthened by ion exchange. To this end, two identical specimens approximately the size and shape of credit cards are soaked for the same amount of time at 850degreeC. Sample A is soaked in NaCl
77. ## chemistry

A glass of composition 85% SiO2 - 15% K2O is to be surface strengthened by ion exchange. To this end, two identical specimens approximately the size and shape of credit cards are soaked for the same amount of time at 850 C. Sample A is soaked in NaCl and
78. ## chemistry

thanks for any help with these translations into scientific notation: 1. magnesium ribbion is dropped into an aqueous solution of hydrochloric acid 2. a solid peice of copper is burned in pure oxygen 3. zinc carbonate is strongly heated in a crucible 4.
79. ## chemistry

A glass of composition 85% SiO2 - 15% K2O is to be surface strengthened by ion exchange. To this end, two identical specimens approximately the size and shape of credit cards are soaked for the same amount of time at 850 ∘C. Sample A is soaked in
80. ## chemistry

A glass of composition 85% SiO2 - 15% K2O is to be surface strengthened by ion exchange. To this end, two identical specimens approximately the size and shape of credit cards are soaked for the same amount of time at 850 ∘C. Sample A is soaked in
81. ## Chemistry

A glass of composition 85% SiO2 - 15% K2O is to be surface strengthened by ion exchange. To this end, two identical specimens approximately the size and shape of credit cards are soaked for the same amount of time at 850∘C. Sample A is soaked in NaCl
82. ## Chemistry

A glass of composition 85% SiO2 - 15% K2O is to be surface strengthened by ion exchange. To this end, two identical specimens approximately the size and shape of credit cards are soaked for the same amount of time at 850 ∘C. Sample A is soaked in
83. ## Science

The density of ocean water depends on the depth because pressure compresses the water. If the density of ocean water at a depth of 10,000 m is 1.071 g/mL and if 25.0 g of water at that depth contains 190 mg of potassium chloride, what is the molar
84. ## Chemistry

Consider the thermal decomposition of potassium chlorate. 2 KClO3 (s)-----> 2 KCl (s) + 3 O2 (g) A mixture containing KCl and KClO3 weighing 1.80 g was heated producing 1.40 x 102 mL of O2 gas at STP. What percent of the original mixture was KClO3? Is
85. ## Physics

Monochromatic x-rays (λ = 0.166 nm) from a nickel target are incident on a potassium chloride (KCl) crystal surface. The spacing between planes of atoms in KCl is 0.314 nm. At what angle (relative to the surface) should the beam be directed for a
86. ## chemistry

Common ion effect;At some other temperature, a solid sample of Ca(OH)2 is shaken with 0.0100? Common ion effect;At some other temperature, a solid sample of Ca(OH)2 is shaken with 0.0100 M CaCl2. Once equ? At some other temperature, a solid sample of
87. ## chemistry

A .500 g sample of impure CaO (a solid) is added to 50.0 mL of 0.100 M HCl. The excess HCl is titrated by 5.00 mL of .125 M NaOH. What is the percentage of CaO in the sample?
88. ## college

Please explain with complete step by step instructions. #8)One type of lawn fertilizer consists of a mixture of nitrogen, phosphorus and potassium. An 80lb sample contains 8 move lbs of nitrogen and phosphorus than potassium. There is 16lb more potasssium
89. ## college Algebra

Please explain with complete step by step instructions. #8)One type of lawn fertilizer consists of a mixture of nitrogen, phosphorus and potassium. An 80lb sample contains 8 move lbs of nitrogen and phosphorus than potassium. There is 16lb more potasssium
90. ## Chem

18) Chlorine reacts with potassium bromide to produce potassium chloride and bromine. A) write a chemical equation, using words, to represent the above chemical reaction. My answer: chlorine + potassium bromide ==> potassium chloride and bromine ( I'm
91. ## chemistry

A 10.0 ml diluted chloride sample required 44.89 ml of 0.01982 M AgNO3 to reach the Fajans end point. how many moles of Cl- ions were present in the sample? What was the concentration of chloride in the diluted solution?
92. ## chemistry

A 0.940g sample of barium chloride dehydrate is heated and 0.800g of anhydrous residue remains after cooling. A. How many moles of anhydrous barium chloride were present in the sample? B. How many moles of water were present in the sample?
93. ## Physical Science

A 68.4-g sample of potassium chloride was added to 200.0 g of water at 20 C. Is the solution saturated, unsaturated, or supersaturated?
94. ## Chemistry

Which two solutions, when mixed together, will undergo a double replacement reaction and form a white, solid substance? 1. NaCl(aq) and LiNO3(aq) 2. KCl(aq) and AgNO3(aq) 3. KCl(aq) and LiCL(aq) 4. NaNO3(aq) and AgNO3(aq) I know the answers 2 but I have no
95. ## Chemistry

Ca(IO3)2(s) ⇌ Ca^(2+)(aq) + 2IO3^(-)(aq) First, you poured 30 mL of 0.100 M Ca^(2+) solution over a 2.000 g sample of solid Ca(IO3)2 and allowed the mixture to sit for 30 minutes. Some of the solid dissolved, causing the calcium ion concentration to
96. ## chemistry

A solution contains 4.46 g KCl in 178 mL of solution. The density of the KCl solution is 1.11 g/ml. What is the percent (m/m) for the potassium chloride solution?
97. ## Chemistry

0.12 g of rock salt(NaCl and impurities) was dissolved in water and titrated with 0.1 M silver nitrate. 19.7 mL was required to titrate all the chloride ion. How many moles of sodium chloride were in the original sample and what percent of the sample are
98. ## science

A 68.4g sample of Potassium Chloride was added to 200g of water at 20 degrees celsius. Is the solution saturated, unsaturated, or supersaturated?
99. ## Chemistry

A mixture of BaCl2.2H2O (FM244.26) and K2SO4 (FM 174.26) is heated at 160C for an hour, causing the water molecules to leave. A sample originally weighing 2.0027 g weighed 1.9021 g after heating. Calculate the mass percent K2SO4 in the sample. In a
100. ## Science

State the reagents that can be use to prepare the following salt potassium chloride(Kcl)