Ask questions and get helpful responses.

A horizontal segment of pipe tapers from a cross sectional area of 50.0 cm^ 2 to 0.500 cm^2. The pressure at the larger end of the pipe is 1.20x 10^5 Pa, and the speed is 0.040 m/s. what is the

39,655 results
  1. Physics

    A horizontal segment of pipe tapers from a cross sectional area of 50.0 cm^ 2 to 0.500 cm^2. The pressure at the larger end of the pipe is 1.20x 10^5 Pa, and the speed is 0.040 m/s. what is the pressure at the narrow end of the segment?
  2. physics

    1.)Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container? 2.)A horizontal segment of pipe tapers from a cross-sectional area of 50 cm^2 to 0.5 cm^2. The pressure at the larger end of the pipe is
  3. physics

    1.)Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container? 2.)A horizontal segment of pipe tapers from a cross-sectional area of 50 cm^2 to 0.5 cm^2. The pressure at the larger end of the pipe is
  4. physics

    1.) Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container? 2.) A horizontal segment of pipe tapers from a cross-sectional area of 50 cm^2 to 0.5 cm^2. The pressure at the larger end of the pipe
  5. physics

    1.) Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container? 2.) A horizontal segment of pipe tapers from a cross-sectional area of 50 cm^2 to 0.5 cm? The pressure at the larger end of the pipe is
  6. physics

    A horizontal segment of pipe tapers from a cross sectional area of 50 cm2 to 0.5 cm2. The pressure at the larger end of the pipe is 1.26 105 Pa and the speed is 0.029 m/s. What is the pressure at the narrow end of the segment? Pa Please help!
  7. Physics

    A horizontal segment of pipe tapers from a cross sectional area of 50 cm2 to 0.5 cm2. The pressure at the larger end of the pipe is 1.34 105 Pa and the speed is 0.038 m/s. What is the pressure at the narrow end of the segment?
  8. physics

    Water flows steadily from an open tank into a pipe. The elevation of the top of the tank is 10.2 m, and the elevation at the pipe is 3.90 m. The initial cross-sectional area of the pipe is 6.40×10^−2 m; and at where the water is discharged from the
  9. phys

    Water flows steadily from an open tank into a pipe as shown in the figure. The elevation of the top of the tank is 12.3 m, and the elevation at the pipe is 3.80 m. The initial cross-sectional area of the pipe (at point 2) is 5.60×10−2 m^2; and at where
  10. Physics

    Alcohol flows smoothly through a horizontal pipe that tapers in cross-sectional area from A1 = 41.9 cm2 to A2= A1/3. The pressure difference Δp between the wide and the narrow sections of the pipe is 11.1 kPa. What is the volume flow rate ΔV/Δt of the
  11. physics

    A venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at a speed v2 through a horizontal section of pipe whose cross-sectional area A2 = 0.0600 m2. The gas has a density of ñ = 1.30 kg/m3. The
  12. physics

    A venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at a speed v2 through a horizontal section of pipe whose cross-sectional area A2 = 0.0900 m2. The gas has a density of ñ = 1.50 kg/m3. The
  13. Physics

    A horizontal segment of pipe tapers from a cross sectional area of 50 cm2 to 0.5 cm2. The pressure at the larger end of the pipe is 1.26 105 Pa and the speed is 0.029 m/s. What is the pressure at the narrow end of the segment? Pa Please help! physics -
  14. Physics

    A horizontal segment of pipe tapers from a cross sectional area of 50 cm2 to 0.5 cm2. The pressure at the larger end of the pipe is 1.26 105 Pa and the speed is 0.029 m/s. What is the pressure at the narrow end of the segment? Pa Please help! physics -
  15. physics

    A horizontal segment of pipe tapers from a cross sectional area of 50 cm2 to 0.5 cm2. The pressure at the larger end of the pipe is 1.26 105 Pa and the speed is 0.029 m/s. What is the pressure at the narrow end of the segment? Pa Please help! physics -
  16. physics

    A Venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at speed v2 through a horizontal section of pipe whose cross-sectional area is A2 = 0.0769 m2. The gas has a density of ρ = 1.30 kg/m3. The
  17. physiscs

    A Venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at speed v2 through a horizontal section of pipe whose cross-sectional area is A2 = 0.0779 m2. The gas has a density of ρ = 1.30 kg/m3. The
  18. Physics please help!!

    Water is flowing in a straight horizontal pipe of variable cross section. Where the cross-sectional area of the pipe is 3.50·10-2 m2, the pressure is 5.30·105 Pa and the velocity is 0.310 m/s. In a constricted region where the area is 12.90·10-4 m2,
  19. Physics

    A venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at a speed v2 through a horizontal section of pipe whose cross-sectional area A2 = 0.0700 m^2. The gas has a density of ρ = 1.80 kg/m^3. The
  20. Physics

    A venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at a speed v2 through a horizontal section of pipe whose cross-sectional area A^2 = 0.0700 m2. The gas has a density of ρ = 1.80 kg/m3. The
  21. Physics

    A venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at a speed v2 through a horizontal section of pipe whose cross-sectional area A2 = 0.0600 m2. The gas has a density of ñ = 1.70 kg/m3. The
  22. Physics

    Alcohol flows smoothly through a horizontal pipe that tapers in cross-sectional area from A1 = 41.9 cm2 to A2= A1/3. The pressure difference Äp between the wide and the narrow sections of the pipe is 11.1 kPa. What is the volume flow rate ÄV/Ät of the
  23. physics

    a fluid flows through a horizontal pipe of varying cross-section. Assuming the flow is streamline and applying the bernoulli equation, show that pressure in the pipe is greatest where cross-sectional area is greatest.
  24. physics

    a fluid flows through a horizontal pipe of varying cross-section. Assuming the flow is streamline and applying the bernoulli equation, show that pressure in the pipe is greatest where cross-sectional area is greatest.
  25. Fluid Machineries

    Water is flowing in a pipe with a circular cross-section area, and at all points the water completely fills the pipe. At point 1, the cross-section area of the pipe is 0.080-m2 and the fluid velocity is 4.50 m/s. (a) What is the fluid speed at a point in
  26. Physics

    I can't seem to figure out this problem...what equation would I use? Thanks! An incompressible, nonviscous fluid is initially at rest in the vertical portion of the pipe, where L = 2.17 m. When the valve is opened, the fluid flows into the horizontal
  27. Physics

    Water enters a pipe with a cross sectional area of 3.0 cm^2 with a velocity of 3.0 m/s. The water encounters a constriction where its velocity is 15 m/s. What is the cross sectional area of the constricted portion of the pipe?
  28. physics

    1. Air flowing through a vent pipe of cross-sectional area 21[m^2] is traveling 0.89[ms^-1]. What is the flowrate? [18.7 m3s-1] Answer with three significant figures (don't forget to round!) or N/A if there is not enough information to answer the question.
  29. Physics

    A pipe has a cross sectional radius of 6.00 cm and is carrying water moving at .380 m/sec. If the pipe narrows to a radius of 3.50 cm, what will be the speed of the water in the narrow segment? What is the flow rate in each segment? thank you!!!!!!!
  30. Physics

    Water is flowing through a pipe of varying cross-sections and elevation. At point 1 of the pipe the cross-sectional area is 0.54m2, the velocity is 4 m/s and the elevation is 2.5 m. At another point 2, the velocity is 2 m/s and the elevation is 1.25 m.
  31. College Physics

    A horizontal pipe has a cross sectional area of 40.0 cm^2 at the wider portions and 10.0 cm^2 at the constriction. Water is flowing in the pipe, and the discharge from the pipe is 6.00*10^-3 m^3/s(6.00 L/s). Find (a) the flow speeds at the wide and the
  32. physics

    A horizontal pipe has a cross sectional area of 40.0 cm^2 at the wider portions and 10.0 cm^2 at the constriction. Water is flowing in the pipe, and the discharge from the pipe is 6.00*10^-3 m^3/s(6.00 L/s). Find (a) the flow speeds at the wide and the
  33. physics

    Water is flowing in a pipe with a circular cross-section area ,and at all point the water completely fills the pipe.At point 1 ,the cross sectiona are of pipe is 0.070 meter square and the fluid velocity is 3.50 meter per second. a.) what is the fluid
  34. physical

    Water flow along horizanta pipe at cross sectional area 48cm which has a constriction at cross sectional area 12cm at one place if the speed at the water at the constriction point is 4m/s calculate the speep at the wide section
  35. PHYSICS!!!

    A liquid (ñ = 1.65 g/cm3) flows through a horizontal pipe of varying cross section as in the figure below. In the first section, the cross-sectional area is 10.0 cm2, the flow speed is 288 cm/s, and the pressure is 1.20 105 Pa. In the second section, the
  36. phisecs

    water is moving with a speed of 5 m/s through a pip with a cross-sectional area of 4cm^2 . the water gradual descends 10 m as the pipe cross-sectional area increases 8cm^2 . if the pressure at the upper level is 1.5*10^5 , the pressure at the lower level
  37. Physics

    A horizontal pipe carries oil whose coefficient of viscosity is 0.700 N·s/m2. The diameter of the pipe is 46.0 cm and its length is 51 km. (a) What pressure difference is required between the ends of this pipe if the oil is to flow with an average speed
  38. physics, buoyance

    Water flows at a rate of 25L/min through a horizontal 8.0-cm-diameter pipe under a pressure of 5.7Pa . At one point, calcium deposits reduce the cross-sectional area of the pipe to 40cm2 . Part A What is the pressure at this point? (Consider the water to
  39. Math

    A gutter is to be made of a strip of metal 22.8 inches wide, with the cross-section having the form of an isosceles trapezoid as shown below. Find the depth h that gives the maximum cross-sectional area. What is the length of a ____ The depth, h , that
  40. Physics

    Water flows straight down from a downspout pipe. The cross-sectional area of the downspout pile is 1.8 m2, and the speed of the water is 0.85 m/s as it leaves the downspout pile. Ignoring air resistance, find the cross-sectional area of the water stream at
  41. physics

    water flows along a horizontal pipe of cross-sectional area 48cm^2 which has a constriction of cross-sectional area 12cm^2 at one place. If the speed of the water at the constriction is 4 m/s, calculate the speed in the wider section. The pressure in the
  42. physics

    water flows along a horizontal pipe of cross-sectional area 48cm^2 which has a constriction of cross-sectional area 12cm^2 at one place. If the speed of the water at the constriction is 4 m/s, calculate the speed in the wider section. The pressure in the
  43. PHYSICS

    The static pressure in horizontal pipeline is 43000Pa and the cross sectional area is 20cm. The fluid is said to be incompressible and non viscous and has density of 1000kg/m. Calculate:- -velocity -The volume flow rate in a pipe
  44. physics

    A liquid (ρ = 1.65 g/cm^3) flows through two horizontal sections of tubing joined end to end. In the first section the cross-sectional area is 10.0 cm^2, the flow speed is 245 cm/s, and the pressure is 1.20 105 Pa. In the second section the
  45. maths

    b. The cross sectional area of a cylindrical pin is 38.1 cm2. The pin has a removed segment. If the height of the segment is 7% of the circumference, find the area of the removed segment.
  46. Maths

    Calculate the number of litres of water delivered per minute by a pipe with cross-sectional area 15 square centimetres, if the water passes through the pipe at an average speed of 30cm/s (second) P.S. Working out please
  47. Alegebra 2

    Water is flowing through a PVC pipe at a rate of 800 ft /min The maximum flow of water in a pipe can be modeled by the formula F = Av , where A is the cross- sectional area of the pipe and is the velocity of the water. Find the maximum flow, in f ^ 2 / m *
  48. Physics

    The blood speed in a normal segment of a horizontal artery is 0.166 m/s. An abnormal segment of the artery is narrowed down by an arteriosclerotic plaque to 1/5 of its normal cross-sectional area. What is the difference in blood pressure between the normal
  49. physics

    The blood speed in a normal segment of a horizontal artery is 0.111 m/s. An abnormal segment of the artery is narrowed down by an arteriosclerotic plaque to 1/5 of its normal cross-sectional area. What is the difference in blood pressure between the normal
  50. Math

    A pipe has an outside diameter of 1.25 inches and an inside diameter of 0.75 inches. If Kelly hacksaws the pipe in two, what fraction of the pipe cross sectional area is sawn when the blade breaks through to the inside?
  51. Physics

    A liquid (density = 1.65 g/cm^3) flows through two horizontal sections of tubing. In the first section the cross-sectional area is 10.0 cm^2, the flow speed is 275 cm/s, and the pressure is 1.20 x 10^5 Pa. This tubing then rises 50 cm to the second
  52. physics

    A horizontal water main with a cross-sectional area of 206 cm2 necks down to a pipe of area 42.4 cm2. Meters mounted in the flow on each side of the transition coupling show a change in gauge pressure of 71.0 kPa. Determine the flow rate through the
  53. Physics

    Water is flowing in a pipe with a varying cross-section area, and at all points the water completely fills the pipe. At point 1 the cross-section area of the pipe is 0.080 m^2, and the magnitude of the fluid velocity is 2.50m/s. Calculate the volume of the
  54. strength of materials

    The composite bar BCD in the figure is fixed at the wall B (x=0), and has constant cross sectional area A_0. The bar is composed by joining, at section C, two segments (BC and CD) of equal length L. Segment CD is homogeneous, made of copper. Segment BC is
  55. Physics

    The composite bar BCD in the figure is fixed at the wall B (x=0), and has constant cross sectional area A_0. The bar is composed by joining, at section C, two segments (BC and CD) of equal length L. Segment CD is homogeneous, made of copper. Segment BC is
  56. PHYSICS

    Water flows with a speed of 2.5 m/s through a section of hose with a cross-sectional area of 0.0084 m^2. Further along the hose the cross-sectional area changes, and the water speed is reduced to 1.1 m/s. Calculate the new cross-sectional area.
  57. Physics

    A total charge of 16ìC passes through a cross-sectional area of a nichrome wire in 4 s. How many electrons pass through the cross-sectional area in 16 s? This has to do with Electric current and so i know that means 16ìC = 16 x 10^-6 = 1.6x10^-5.
  58. Physics

    Two wires have the same length and the same resistance but are made up of different materials. The resistivities of these materials are 3.97 Ù and 1.97 Ù. Obtain the ratio of the smaller cross-sectional area to the greater cross-sectional area.
  59. physics

    a tunnel was constructed with a very large pipe with a cross-sectional area of 1.5m^2. it is at a given height descending to 5m^2 and then narrows to 0.500m^2, where it terminates in a valve. if the pressure at point 2 is the atmospheric pressure and the
  60. maths help

    Hi MY question is if a cylinder has a volume of 72cm cubed and a cross-sectional area of 18cm squared. Work out the height of the cylinder Can someone show me how we do it by the steps The volume of a cylinder is given by volume = (cross-sectional area) x
  61. Mechanics

    The composite bar BCD in the figure is fixed at the wall B (x=0), and has constant cross sectional area A0. The bar is composed by joining, at section C, two segments (BC and CD) of equal length L. Segment CD is homogeneous, made of copper. Segment BC is
  62. Physics

    Water, with a density of ρ=1180 kg/m3, flows in a horizontal pipe. In one segment of the pipe, the flow speed is v1=7.73 m/s. In a second segment, the flow speed is v2=3.77 m/s. What is the difference between the pressure in the second segment (P2) and
  63. physics

    a homeowner wishes to drain her swimming pool by siphoning the water, whose depth is h, into a nearby gully a distance H below it,where H is much larger than h.she uses pipe of cross-sectional area a, and the pool has surface area A.how long does it take
  64. Physics

    Blood flows in an aorta of radius 4.62mm at 35.0cm/s. Calculate the volume flow rate. Although the cross-sectional area of a capillary is much smaller than that of the aorta, there are many capillaries, so their total cross-sectional area is much larger.
  65. Physics

    A)Blood flows in an aorta of radius 4.50mm at 27.5cm/s. Calculate the volume flow rate. B)Although the cross-sectional area of a capillary is much smaller than that of the aorta, there are many capillaries, so their total cross-sectional area is much
  66. physics

    Blood flows in an aorta of radius 4.12mm at 35.0cm/s. Calculate the volume flow rate. Although the cross-sectional area of a capillary is much smaller than that of the aorta, there are many capillaries, so their total cross-sectional area is much larger.
  67. Fluid Mechanics

    In a hydraulic system a 20.0-N force is applied to the small piston with cross sectional area 25.0 cm2. What weight can be lifted by the large piston with cross sectional area 50.0 cm2?
  68. physics ---- really dnt get this at all

    A total charge of 25 mC passes through a cross-sectional area of a nichrome wire in 10 s. How many electrons pass through the cross-sectional area in 16 s? Choose one answer. a. 2.5 x 1017 electrons b. 2.5 x 1019 electrons c. 2.5 x 1016 electrons d. 2.5 x
  69. physics

    If for the pipe carrying water in a building, h = 220 meters, v_1 = 3.8 m/s, and the cross-sectional area at 1 is twice that at 2. What must P_1 be in order that P_2 = 135000 Pa? P_1 =
  70. physics

    A net charge of 47 mC passes through the cross-sectional area of a wire in 19.0 s. (a) What is the current in the wire? 1 A (b) How many electrons pass the cross-sectional area in 1.0 min? 2 . electrons I got 9.3e+22 for B but its wrong
  71. physics

    A horizontal pipe of uniform cross sectional area A empties into a bucket, filling it at a rate R (unit volume per unit time). Use dimensional analysis to determine the speed,v, of the fluid in the pipe to within a dimensionless multiplicative constant of
  72. Physics

    A wire of cross-sectional area 5.00x10^-6 m^2 has a resistance of 1.75 ohm. what is the resistance of a wire of the same material and length as the first wire, but with a cross-sectional area of 8.75x10^-6 m^2? I really want to understand what to do here,
  73. physics

    A net charge of 47 mC passes through the cross-sectional area of a wire in 19.0 s. (a) What is the current in the wire? 1 A (b) How many electrons pass the cross-sectional area in 1.0 min? 2 electrons
  74. physics

    A net charge of 47 mC passes through the cross-sectional area of a wire in 19.0 s. (a) What is the current in the wire? 1 A (b) How many electrons pass the cross-sectional area in 1.0 min? 2 electrons
  75. physics A

    A net charge of 47 mC passes through the cross-sectional area of a wire in 19.0 s. (a) What is the current in the wire? 1 A (b) How many electrons pass the cross-sectional area in 1.0 min? 2 . electrons
  76. Physics

    This problem compares some energy properties of two motor vehicles: For efficient car, use drag coefficient of .21 and a cross sectional area of 1.5m^2. For a light truck, use drag coefficient of .75 and a cross sectional area of 2.7m^2. Use 1.25 kg/m^3
  77. another physics question

    A liquid ( = 1.65 g/cm3) flows through two horizontal sections of tubing joined end to end. In the first section the cross-sectional area is 10.0 cm2, the flow speed is 275 cm/s, and the pressure is 1.20 105 Pa. In the second section the cross-sectional
  78. physics

    The intake in the figure has cross-sectional area of 0.75 m2 and water flow at 0.41 m/s. At the outlet, distance D = 180 m below the intake, the cross-sectional area is smaller than at the intake and the water flows out at 9.6 m/s. What is the pressure
  79. physics

    Two conductors are made of the same material and have the same length. They each have circular cross sectional areas. The ratio of their radii is 2:1. they carry the same current. What is the ratio of the electrical potential across their lengths? i know
  80. Hydraulic Physics

    In a hydraulic system a 20.0-N force is applied to the small piston with cross sectional area 25.0 cm2. What weight can be lifted by the large piston with cross sectional area 50.0 cm2? Would I need to divide both pistons areas then mutiply the force? and
  81. Physical Education

    Suppose that blood flows through the aorta with a speed of 0.35 m/s. The cross-sectional area of the aorta is 2.0x10-4 m2. (a) Find the volume flow rate of the blood (b) The aorta branches into tens of thousands of capillaries whose total cross-sectional
  82. Precal

    The velocity v of a fluid flowing in a conduit is inversely proportional to the cross- sectional area of the conduit.( Assume that the volume of the flow per unit of time is held constant .) Determine the change in the velocity of water flowing from a hose
  83. PHYS101

    For a system,the cylinder on the left,at L,has a mass of 600kg and a cross-sectional area of 800centi meter squad.The piston on the right,at S,has cross-sectional area 25centi meter squad abd negligible weight.If the apparatus is filled with
  84. physics

    A piston of cross sectional area 100cm2 is used in hydraulic to exert a force of 10000000dyne find the cross area of another having weight 2000kg
  85. Physics, URGENT!!!

    We consider tobacco virus diffusing along a 0.47 m long tube filled with water. The cross-sectional area of the tube is unknown. The diffusion coefficient is found in Table 10.5, p. 319 in the textbook. A total amount of virus of 2.6 x 10-16 kg is
  86. AP PHYSICS HELP

    One piston of a hydraulic lift holds 1.40*10^3 kg. The other holds an ice block (density= 917 kg/m^3) that is 0.076 m thick. Find the first piston's area. (Cross sectional area of the ice block = cross sectional area of the piston).
  87. Physics

    Water is moving with a speed of 5.0 m/s through a pipe with a cross-sectional area of 4.2 cm2. The water gradually descends 8.2 m as the pipe increases to 9.0 cm2. (a) What is the speed at the lower level? (b) If the pressure at the upper level is 1.8 ×
  88. Physics

    A green sedan weighing 25,000 Newtons is put on a lift supported by a piston with a cross sectional area of 0.1 square meters. What is the minimum force that must be exerted by the air compressor that pushes down on the oil in the reservoir of the lift
  89. Physics. Please help!

    A green sedan weighing 25,000 Newtons is put on a lift supported by a piston with a cross sectional area of 0.1 square meters. What is the minimum force that must be exerted by the air compressor that pushes down on the oil in the reservoir of the lift
  90. Physics

    A green sedan weighing 25,000 Newtons is put on a lift supported by a piston with a cross sectional area of 0.1 square meters. What is the minimum force that must be exerted by the air compressor that pushes down on the oil in the reservoir of the lift
  91. physics

    A green sedan weighing 25,000 Newtons is put on a lift supported by a piston with a cross sectional area of 0.1 square meters. What is the minimum force that must be exerted by the air compressor that pushes down on the oil in the reservoir of the lift
  92. Physics

    A green sedan weighing 25,000 Newtons is put on a lift supported by a piston with a cross sectional area of 0.1 square meters. What is the minimum force that must be exerted by the air compressor that pushes down on the oil in the reservoir of the lift
  93. Physics

    A green sedan weighing 25,000 Newtons is put on a lift supported by a piston with a cross sectional area of 0.1 square meters. What is the minimum force that must be exerted by the air compressor that pushes down on the oil in the reservoir of the lift
  94. physics

    The diffusion rate for a solute is 4.0E-11 kg/s in a solvent-filled channel that has a cross-sectional area of 0.50 cm^2 and a length of 0.220 cm. What would be the diffusion rate m/t in a channel with a cross-sectional area of 0.30 cm^2 and a length of
  95. physic

    a pipe is 40% blocked the water is coming into the region is moving at 8.5cm/s just before the blocked segment of pipe. What is the speed of the water as it goes through the partially blocked segment? By how many pascals does the pressure in the blocked
  96. Math Nightmare

    I need help The design of a new airplane requires a gasoline tank of constant cross-sectional area in each wing. A scale drawing of a cross section is shown here. The tank must hold 5000lb of gasoline, which has a density of 42 lb/ft3. Estimate the length
  97. physics

    (a) Calculate the mass flow rate (in grams per second) of blood (ρ = 1.0 g/cm3) in an aorta with a cross-sectional area of 2.0 cm2 if the flow speed is 35 cm/s. g/s (b) Assume that the aorta branches to form a large number of capillaries with a combined
  98. physics

    Water flows at speed of 4.2 m/s through a horizontal pipe of diameter 3.4 cm. The gauge pressure P1 of the water in the pipe is 1.5 atm. A short segment of the pipe is constricted to a smaller diameter of 2.4 cm. What is the gauge pressure of the water
  99. mechanics

    Sketch a stress-strain curve for which the stress is calculated using the actual cross-sectional area rather than the original cross-sectional area. Explain why this curve differtypical stress-strain curve
  100. mechanics of materials

    The following data was obtained from a tensile test of steel. The test specimen was 15mm in diameter and 50 mm in length. Load(kN)/elongation mm) 5 /0.005 10 /0.015 30 /0.048 50 /0.084 60 /0.102 64.5 /0.109 67 /0.119 68 /0.137 69 /0.16 70 /0.229 72 /0.3 76

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20