A heavy wooden block rests on a flat table and a highspeed bullet is fired horizontally into the block, the bullet stopping in it. How far will the block slide before coming to a stop? The mass of the bullet
57,534 results
Physics
An 8.00 g bullet is fired into a 250 g block that is initially at rest at the edge of a table of 1.00 m height (Fig. P6.26). The bullet remains in the block, and after the impact the block lands 2.00 m from the bottom of the table. Determine the initial

Impulse and Momentum
A bullet of mass m is fired at speed v0 into a wooden block of mass M. The bullet instantaneously comes to rest in the block. The block with the embedded bullet slides along a horizontal surface with a coefficient of kinetic friction . What is the

Physics
A bullet of mass 1.9×10−3 kg embeds itself in a wooden block with mass 0.987 kg, which then compresses a spring (k = 120 N/m) by a distance 3.5×10−2 m before coming to rest. The coefficient of kinetic friction between the block and table is 0.42.

Physics
A 96.0g wooden block is initially at rest on a rough horizontal surface when a 11.4g bullet is fired horizontally into (but does not go through) it. After the impact, the block–bullet combination slides 6.5 m before coming to rest. If the coefficient

Physics
A 2.50g bullet, traveling at a speed of 425m/s, strikes the wooden block of a ballistic pendulum. The block has a mass of 270g (a) find the speed of the bullet/block combination immediately after the collision (b) how high does the combination rise above

physics
A heavy wooden block rests on a flat table and a highspeed bullet is fired horizontally into the block, the bullet stopping in it. How far will the block slide before coming to a stop? The mass of the bullet is 10.5 g, the mass of the block is 10.5 kg the

Physics
A 15g bullet is fired horizontally into a 3.000kg block of wood suspended by a long cord. The bullet sticks in the block. Compute the speed of the bullet if the impact causes the block to swing 10 cm above its initial level. Initial Velocity of

Physics
A 3.5 g bullet is fired horizontally at 2 blocks resting on a smooth tabletop. The bullet passes trough the 1st block, with mass 1.2 kg and embed itself in the second with mass 1.8 kg. Speeds of 0.63 m/s and 1.4 m/s, respectively are there by imparted on

physics
A bullet of mass 12 g is fired horizontally into a fixed wooden block with a speed of 20m/s. The bullet is brought to rest in the block in 0.1 seconds by a costant resistance. Calculate the (i) magnitude of the resistance (ii) distance moved by the bullet

physics
a bullet of mass 120g is fired horizontally into a fixed wooden block with a speed of 20 m/s. If the bullet is brought to rest in the block in 0.1s by a constant resistance, calculate the 1) magnitude of the 2) Distance moved by the bullet in the wood.?

Physics
A bullet of mass 0.02kg is fired at a speed of 500m/s towards a fixed wooden block of thickness 10cm. The bullet penetrates the block and emerges with a speed of 200m/s. a) Find the average retarding force on the bullet when it is passing through the

physics
a 100g bullet is fired horizontally into a 14.9kg block of wood resting on a horizontal surface and the bullet becomes embedded in the block. if the muzzle velocity of the bullet is 250 m/s , what is the speed of the bullet immedatly after the impact

physics
A ballistic pendulum is used to measure the speed of bullets. It comprises a heavy block of wood of mass M suspended by two long cords. A bullet of mass m is fired into the block in the horizontal direction. The block, with the bullet embedded in it,

physics
a 2kg block of wood rests on a long table top. a 5 gram bullet moving horizontally with speed of 150m/s is shoot into the block and stricks in it then block slides 270cm along the table and stops. find a)speed of block after impact b)friction force between

Physics
A bullet of mass 12g which is fired horizontally hits the wooden block of mass 1kg suspended on a string (a) calculate the initial velocity of the bullet . (b) calculate the energy lost by the bullet when it hits the wooden block

physics
A 5 g bullet is fired into a 2 kg wooden block attached to a spring with a force constant of 20 N/m. It lodges in the block, and the block and bullet compress the spring until they come to a rest. If the bullet was moving at 1000 m/s just before the

Physics Elena please help!
A 20.0 g bullet is fired horizontally into a 85 g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 156 N/m. The bullet becomes embedded in the block. The bullet block system

physics
A 16.0 g bullet is fired horizontally into a 87 g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 168 N/m. The bullet becomes embedded in the block. The bullet block system

physics
Can someone please help me solve this: An 7.74g bullet is fired into a 320g block that is initially at rest at the edge of a frictionless table of height h = 1.07 m The bullet remains in the block, and after the impact the block lands d = 2.07 m from the

physics
a bullet of mass 0.04kg moving with a speed of 90m/s enter a heavy wooden block is stopped after a distance of 60cm.What is the avg resistive force exertes by the block or the bullet

pHysics !!
A 20g bullet is fired horizontally into a 980 g block of wood suspended by a long cord. The bullet sticks in the block and causes the block to swing 15 cm above its initial level. a) What is the momentum of the bullet before it hit the block? b) Determine

Physics
A heavy wooden block rests on a flat table and a highspeed bullet is fired horizontally into the block, the bullet stopping in it. How far will the block slide before coming to a stop? The mass of the bullet is 9.5 g, the mass of the block is 10.5 kg, the

Physics
A bullet of mass is fired horizontally with speed at a wooden block of mass resting on a frictionless table. The bullet hits the block and becomes completely embedded within it. After the bullet has come to rest within the block, the block, with the bullet

physics
A 1.75kg wooden block rests on a table over a large hole as in the figure below. A 4.60g bullet with an initial velocity vi is fired upward into the bottom of the block and remains in the block after the collision. The block and bullet rise to a maximum

College Physics
A 1.75kg wooden block rests on a table over a large hole as in the figure below. A 4.60g bullet with an initial velocity vi is fired upward into the bottom of the block and remains in the block after the collision. The block and bullet rise to a maximum

physics
A 16.0 g bullet is fired horizontally into a 87 g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 168 N/m. The bullet becomes embedded in the block. The bullet block system

physics
A 3.50 g bullet is fired horizontally at two blocks at rest on a frictionless table. The bullet passes through block 1 (mass 1.16 kg) and embeds itself in block 2 (mass 1.85 kg). The blocks end up with speeds v1 = 0.560 m/s and v2 = 1.36 m/s (Figure (2)).

physics
at on time, the velocity of a rifle bullet was measured using a ballistic pendulum made up of a wooden block suspended from a string. the block used here has a mass of 20kg. a 50g rifle bullet is fired into the block, penetrating it by 10cm and causing it

Physics
A bullet with a mass of 4.0 g and a speed of 650 m/s is fired at a block of wood with a mass of 9.7×10−2 kg. The block rests on a frictionless surface, and is thin enough that the bullet passes completely through it. Immediately after the bullet exits

Physic
A bullet with a mass of 4.0 g and a speed of 736 m/s is fired at a block of wood with a mass of 0.075 kg. The block rests on a frictionless surface, and is thin enough that the bullet passes completely through it. Immediately after the bullet exits the

physics
An 8.00 g bullet is fired into a 250 g block that is initially at rest at the edge of a table of 1.00 m height. The bullet remains in the block, and after the impact the block lands d = 1.8 m from the bottom of the table. Determine the initial speed of the

physics
A bullet of mass 6.00 g is fired horizontally into a wooden block of mass 1.21 kg resting on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.210. The bullet remains embedded in the block, which is observed to slide

physics
A block of wood with a mass of 1300g is sitting on a horizontal tabletop. The coefficient of kinetic friction between the block and table is µk=0.74.A rifle bullet with a mass of 39g is fired horizontally into the block at a sped of 290m/s and stops

physics 111
1. A stone throw from ground level returns to the same level 4 s after. With what speed was the stone throw? Take g = 10m per square. 2. A cart is moving horizontally along a straight line with constant speed ofb30 m/s. A projectile is fired from the

physics
A 12.0 g bullet is fired into a 13.9kg wooden block that is hanging straight down, suspended by a 2.00 m length of light line. The bullet has a muzzle velocity of 94.2 m/s. When the bullet hits the block, the bullet stays in the block. The block swings

college physics
a bullet of mass 8g is fired into a block of mass 260g that is initially at rest at the edge of a table of height 1m the bullet remains in the block and after the impact the block land d=2.20m for the bottom of the table. determine the speed of the bullet

Physics
A bullet of mass 8 gram is fired into a block of mass 2,5 kg initially at rest at the edge of a frictionless table of height 1 m. The bullet remains in the block, and after impact the block lands a distance 2 m from the bottom of the table. Determine the

Physics
A bullet of mass 15 g is fired with an initial speed of 287 m/s into a wooden block that is initially at rest. The bullet becomes lodged in the block, and the bullet and block then slide together on the floor for a distance of 1.4 m before coming to rest

physics
a bullet of mass 0.04kg moving with a speed of 90m/s enter a heavy wooden block is stopped after a distance of 60cm.What is the avg resistive force exertes by the block or the bullet

Physics
A 5.0g bullet traveling horizontally at an unknown speed hits and embeds itself in a 0.195kg block resting on a frictionless table. The block slides into and compresses a 180N/m spring a distance of 0.15m before stopping the block and bullet. Determine

Physics
A bullet is fired into a block of wood with speed 250 m/s. The block is attached to a spring that has a spring of 200 N/m. The block embedded bullet compresses the spring a distance of 30.0 cm to the right. Determine the mass of the wooden block

physics
A heavy wooden block rests on a flat table and a highspeed bullet is fired horizontally into the block, the bullet stopping in it. How far will the block slide before coming to a stop? The mass of the bullet is 10.5 g, the mass of the block is 10.5 kg the

physics
A bullet of mass 4.7 g is fired horizontally into a 2.4 kg wooden block at rest on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.28. The bullet stops in the block, which slides straight ahead for 2.2 m (without

Physics
A 1.75kg wooden block rests on a table over a large hole as in the figure below. A 5.20g bullet with an initial velocity vi is fired upward into the bottom of the block and remains in the block after the collision. The block and bullet rise to a maximum

Physics HELP!
A 20.0 g bullet is fired horizontally into a 85 g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 156 N/m. The bullet becomes embedded in the block. The bullet block system

Physics
A bullet of mass 5.15 g is fired horizontally into a 2.74 kg wooden block at rest on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.185. The bullet comes to rest in the block, which moves 1.84 m. (a) What is the

physics
A bullet of mass 8.0 g is fired horizontally into a 2.2 kg wooden block at rest on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.40. The bullet comes to rest in the block, which moves 2.30 m. (a) What is the speed

physics
A 11.0 g bullet is fired horizontally into a 108 g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring of constant 151 N/m. The bullet becomes embedded in the block. If the bulletblock system compresses

Physics
A 12.0 g bullet is fired horizontally into a 108 g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring of constant 144 N/m. The bullet becomes embedded in the block. If the bulletblock system compresses

Physics
A 11.0g bullet is fired horizontally into a 101g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 160 N/m. The bullet becomes embedded in the block. If the bulletblock system

physics
A 10.0g bullet is fired horizontally into a 101g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 155 N/m. The bullet becomes embedded in the block. If the bulletblock system

physics
suppose that a horizontal force of 0.7 n is required to pull a 5.0 kg block across the table at constant speed. what is the initial speed of a 20 g bullet, fired horizontally into the block, if the bullet imbeds in the initially stationary block and causes

PHYSICS
A 6.00g bullet is fired horizontally into a 1.50kg wooden block resting on a horizontal surface. The coefficient of kinetic friction between block and surface is .30. the bullet remains embedded in the block, which is oserved to slide .25m along the

physics
An 7.95 g bullet is fired horizontally into a 9.03 kg block of wood on an air table and is embedded in it. After the collision, the block and bullet slide along the frictionless surface together with a speed of 11.6 cm/s. What was the initial speed of the

Physics so confused!!
A bullet with a mass of 5.40 g is fired horizontally at two blocks resting on a smooth and frictionless table top as shown in the Figure. The bullet passes through the first 1.20 kg block, and embeds itself in a second 1.20 kg block. Speeds v1 = 3.90 m/s

science
A 3.00g bullet traveling horizontally at 500 m/s hits a 4.8kg wooden block, which is initially at rest on a smooth horizontal table. The bullet buries itself in the block without passing through. The speed of the block after the collision is:

Physics Elena please help!
A 20.0 g bullet is fired horizontally into a 85 g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 156 N/m. The bullet becomes embedded in the block. The bullet block system

p
A 16.0 g bullet is fired horizontally into a 87 g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 168 N/m. The bullet becomes embedded in the block. The bullet block system

physics
A bullet of mass m = 5.89 g is fired into a block of mass M = 3.09 kg that is initially at rest on the edge of a smooth table. (The table top is 0.83 m above the floor.) The bullet ends up stuck in the block, and together they fly off the table and fall to

Mechanical engineering
A bullet of mass 50 grams is fired horizontally into a wooden block of mass 0.2kg. The wodden block is suspended from the ceiling by a long string as shown in the diagram. After impact the bullet is embedded in the block and bullet and the block swing

Physics
A 96.0g wooden block is initially at rest on a rough horizontal surface when a 11.4g bullet is fired horizontally into (but does not go through) it. After the impact, the block–bullet combination slides 6.5 m before coming to rest. If the coefficient

Physics
A 96.0g wooden block is initially at rest on a rough horizontal surface when a 11.4g bullet is fired horizontally into (but does not go through) it. After the impact, the block–bullet combination slides 6.5 m before coming to rest. If the coefficient

Physics
A 96.0g wooden block is initially at rest on a rough horizontal surface when a 11.4g bullet is fired horizontally into (but does not go through) it. After the impact, the block–bullet combination slides 6.5 m before coming to rest. If the coefficient

Physics
A 4.00g bullet, traveling horizontally with a velocity of magnitude 410m/s , is fired into a wooden block with mass of 0.780kg , initially at rest on a level surface. The bullet passes through the block and emerges with its speed reduced to 220m/s . The

physics
In Figure (1), a 3.50 g bullet is fired horizontally at two blocks at rest on a frictionless table. The bullet passes through block 1 (mass 1.13 kg) and embeds itself in block 2 (mass 1.75 kg). The blocks end up with speeds v1 = 0.600 m/s and v2 = 1.32 m/s

Physics
A block of mass m 1 sits at rest on a table over a hole in the table. From below the table, a bullet of mass m 2 is fired vertically upwards into the block. The bullet imbeds itself in the block. The block and bullet rise to a maximum height h. What is the

Physics
7 g bullet is ﬁred into a 124 g block that is initially at rest at the edge of a frictionless table of height 1.3 m. The bullet remains in the block, and after impact the block lands 2.2 m from the bottom of the table. Find the initial speed of the

physics
A 4.7 g bullet is fired horizontally into a 0.50 kg block of wood resting on a frictionless table. The block, which is attached to a horizontal spring, retains the bullet and moves forward, compressing the spring. The blockspring system goes into SHM with

physics
A 20 g bullet moving horizontally with a speed v hits a 2kg block of wood resting on a table. After hitting the block the bullet is embedded in the block of wood and the block and the bullet moves a distance of 40 cm before it stops. If the coefficient of

Physics
A 12 g bullet is fired horizontally into a 96 g wooden block initially at rest on a horizontal surface. After impact, the block slides 7.5 m before coming to rest. If the coefficient of kinetic friction between block and surface is 0.60, what was the speed

physic
Hi!could anyone help me with this problem please because I been trying so many time and did not get it. Greatly appreciate it. Thank. A 11.2 g bullet is fired horizontally into a 94 g wooden block initially at rest on a horizontal surface. After impact,

PHYSICS HELP!!!!!
A 7.0 g bullet is fired horizontally into a 1.5 kg block of wood suspended by a thread. The bullet emerges from the block with a speed of 195 m/s, and the block rises to a maximum height of 12 cm. Find the initial speed of the bullet.

physics
A 40 gram bullet is fired horizontally from a gun with a momentum of 2.8 (kg*m/s) and embeds itself into a 300 gram block of wood initially at rest on a wooden horizontal surface. After this collision the wood block slides 15 meters before falling off a

Physics
A 40 gram bullet is fired horizontally from a gun with a momentum of 2.8 (kg*m/s) and embeds itself into a 300 gram block of wood initially at rest on a wooden horizontal surface. After this collision the wood block slides 15 meters before falling off a

Physics
A bullet with a mass m=12.5 g and speed v=85.4 m/s is fired into a wooden block with M=113 g which is initially at rest on a horizontal surface. The bullet is embedded into the block. The blockbullet combination slides across the surface for a distance d

Physics  URGENT
A small block of mass 5 kg initially rests on a track at the bottom of a circular, vertical looptheloop, which has a radius of 0.8 m. The surface contact between the block and the loop is frictionless. A bullet of mass 0.7 kg strikes the block

physics
An m1 = 8.40 g bullet is fired into a m2 = 2.17 kg block that is initially at rest at the edge of a frictionless table of height h = 1.13 m. The bullet remains in the block, and after impact the block lands d = 1.76 m from the bottom of the table.

physics
An 8.00 g bullet is fired into a 180 g block that is initially at rest at the edge of a table of 1.00 m height. The bullet remains in the block, and after the impact the block lands d = 2.2 m from the bottom of the table. Determine the initial speed of the

physics
An 8.00 g bullet is fired into a 160 g block that is initially at rest at the edge of a table of 1.00 m height. The bullet remains in the block, and after the impact the block lands d = 1.6 m from the bottom of the table. Determine the initial speed of the

physics
An 8.00 g bullet is fired into a 160 g block that is initially at rest at the edge of a table of 1.00 m height. The bullet remains in the block, and after the impact the block lands d = 1.6 m from the bottom of the table. Determine the initial speed of the

physics
An 8.00 g bullet is fired into a 160 g block that is initially at rest at the edge of a table of 1.00 m height. The bullet remains in the block, and after the impact the block lands d = 2.1 m from the bottom of the table. Determine the initial speed of the

college physics
An 7.81g bullet is fired into a 220g block that is initially at rest at the edge of a table of h = 1.15 m height.The bullet remains in the block, and after the impact the block lands d = 2.13 m from the bottom of the table. Determine the initial speed of

physics
An 8.64g bullet is fired into a 365g block that is initially at rest at the edge of a table of h = 1.11 m height The bullet remains in the block, and after the impact the block lands d = 1.87 m from the bottom of the table. Determine the initial speed of

physics
An 8.82g bullet is fired into a 235g block that is initially at rest at the edge of a table of h = 1.05 m height (see the figure below). The bullet remains in the block, and after the impact the block lands d = 2.16 m from the bottom of the table.

physics!!
An 8.82g bullet is fired into a 235g block that is initially at rest at the edge of a table of h = 1.05 m height (see the figure below). The bullet remains in the block, and after the impact the block lands d = 2.16 m from the bottom of the table.

Physical science
The bullet strikes a stationary of 5kg wooden block fixed to a flat,horizontal table.the bulletis brought to the rest after travelling a distance of 0,4m into the block.calculate the magnitude of the average force exerted by the block on the bullet

Physics
A(n) 7 g bullet is fired into a 122 g block that is initially at rest at the edge of a frictionless table of height 0.9 m. The bullet remains in the block, and after impact the block lands 1.7 m from the bottom of the table.The acceleration of gravity is

physics
A(n) 5 g bullet is ﬁred into a 249 g block that is initially at rest at the edge of a frictionless table of height 1.7 m. The bullet remains in the block, and after impact the block lands 1.6 m from the bottom of the table. The acceleration of gravity is

physics
A(n) 5 g bullet is ﬁred into a 249 g block that is initially at rest at the edge of a frictionless table of height 1.7 m. The bullet remains in the block, and after impact the block lands 1.6 m from the bottom of the table. The acceleration of gravity is

Physics help please
A 13.2 gm bullet is fired into a 12.0 kg wood block that is at rest on a wood table. The block, with the embedded bullet, slides 5.00 cm across the table. Assuming that the local acceleration due to gravity is 9.80m/s2 and that the coefficient of kinetic

Physics
An 8.0g bullet is fired into a 2.5 Kg block at rest at the edge of a frictionless table of height 1.0 m. The bullet remains in the block and after the impact the block lands (d) distance from the bottom of the table. Find the initial speed of the bullet.

Physics
A 10 g bullet is fired into a 5 kg wooden block initially at rest on the floor. The bullet lodges in the block and the block slides 10 cm across the floor before coming to rest. If the coefficient of kinetic friction between the block and the floor is 0.5

physics
1) a bullet of mass 0.02 kg is fired into a block of wood of mass 1.5 kg resting on a horizontal table. The block moves offwith an initial speed of 8 m/s. Estimate the speed with the bullet strikes the block. 2) The bullet in question 1 is fired from a

physics
A 7 x 10^3kg bullet is fired into a 2kg wooden block initially at rest on a level surface. The bullet passes through the block and emerges with the velocity of 200m/s. The block slides 0.5m and stops. If the coefficient of friction between the block and

physics
A 3.0 kg block is sitting at rest at the edge of a cliff. A 400 gram bullet is fired at the block with an initial velocity of 500m/s. The bullet goes through the block and has a speed of 400m/s after it leaves the block. The block lands 50m from the base

PHYSICS
In a laboratory experiment, a bullet of mass 47.0 g is shot horizontally into a stationary block of totara of mass 3.50 kg that hangs from a light string. The bullet is then embedded a distance d = 3.50 cm into the block and the combined blockbullet

Physics
A bullet of mass 0.06kg is fired horizontally with a muzzle speed of 700 m/s into a pendulums hanging block of mass 2.0kg. The block and the bullet then move up a height, h, above the pendulums equilibrium position. What is the speed of the bullet/block

PHYSICS !!
A 45.0g bullet is fired on a 2.0kg wooden block which is resting on a horizontal surface with a coefficient friction of 0.4 . If the speed of the bullet is 165m/s when it hits the block. Determine the maximum horizontal distance of the block will reach

Physics
I cant find out how to solve this problem. I have tried multiple times and get it wrong every time. Please show me how to solve the problem. An 9.00 g bullet is fired into a 322 g block that is initially at rest at the edge of a table of 1.3 m height. The

Physics
A 0.030kg bullet is fired straight up at a falling wooden block that has a mass of 5.0 kg. The bullet has a speed of 700 m/s when it strikes the block. The block originally was dropped from rest from the top of a building and had been falling for a time t