# A block of iron at 39.0°C has mass 2.30 kg. If 3.50×104 J of heat are transferred to the block, what is its resulting temperature?

46,128 results
1. ## Physics

Block 1, of mass m1 = 0.650kg , is connected over an ideal (massless and frictionless) pulley to block 2, of mass m2, as shown. For an angle of θ = 30.0∘ and a coefficient of kinetic friction between block 2 and the plane of μ = 0.400, an acceleration

2. ## Physics

A block of mass m = 2.00 kg rests on the left edge of a block of mass M = 8.00 kg. The coefficient of kinetic friction between the two blocks is 0.300, and the surface on which the 8.00- kg block rests is frictionless. A constant horizontal force of

3. ## Physics

A block of mass 3m is placed on a frictionless horizontal surface, and a second block of mass m is placed on top of the first block. The surfaces of the blocks are rough. A constant force of magnitude F is applied to the first block as shown in the figure.

4. ## Chemistry

The specfic heat of iron is 0.11cal/g C. The heat of fusion of iron, the heat required to convert iron from a solid to liquid at its melting point, is 63.7cal/g. Iron melts at 1530 C. How much heat must be added to 2g of iron at 25c to completely melt it?

5. ## Physical Science

A 100-g chunk of 72 ∘C iron is dropped into a cavity in a very large block of ice at 0∘C. What is the mass of ice that melts. (The specific heat capacity of iron is 0.11 cal/g⋅∘C.).

6. ## physics

A hot iron horseshoe (mass = 0.43 kg), just forged (Fig. 14-16), is dropped into 1.60 L of water in a 0.26 kg iron pot initially at 20°C. If the final equilibrium temperature is 26°C, estimate the initial temperature of the hot horseshoe. Could someone

7. ## Chemistry honors

A 500 g piece of iron changes 7°C when heat is added. How much heat energy produced this change in temperature? C of iron is 0.450 J/g°C

8. ## physics

a block of mass 3 kg rests on a smooth table and connected to another block of mass 2 kg, after passing over and ideal pulley, the block of mass 2 kg is released. how long does it take the block to travel 80 cm

9. ## physics

An aluminum block absorbs 1.0 x 104 J of energy from the Sun when its temperature increases by 5.0 °C. What is the mass of the block? the specific heat capacity of aluminum is 920

10. ## Chemistry

How many joules are required to raise the temperature of 450mL of water from 30 °C to 100 °C? The specific heat of copper metal is 0.385 J/ g- K. How many KJ of heat needed to raise the temperature of 1.1 kg block of copper from 27.5 C to 50 C? If 200 J

11. ## physics

A block of ice at 0°C whose mass initially is m = 48.4 kg slides along a horizontal surface, starting at a speed vo = 4.91 m/s and finally coming to rest after traveling a distance d = 12.28 m. Compute the mass of ice melted as a result of the friction

12. ## chemistry

a 2kg block of iron is given 10kj of energy and its temperature rises by 10c. what is the specific heat capacity of iron?

13. ## chemistry

1125 J of energy is used to heat 250 g of iron. After heating, the final temperature of the iron is measured as 55 °C. The specific heat capacity of iron is 0.45 J/(g·°C). What was the initial temperature of the iron? A. 45 B. 55 C. 20 D. 35 I don't

14. ## physics

The Figure shows two blocks, block 1 and block 2, held in equilibrium by a massless, unstretchable string. The mass of block 1 is 14.2 kg, the mass of block 2 is 6.2 kg, and the angle theta is 26o The system begins to slip if any additional mass is added

15. ## int.science gtg in 8 min.

How much heat is contained in 100 kg of water at 60.0 °C? Be mindful of significant figure rules for both multiplication and addition. 30 kcal 2.10 x 104 kcal 2.40 x 104 kcal 2.77 x 104 kcal

16. ## Physics

You cool a 100g slug of red hot iron (745oC) by dropping it into an insulated cup of negligible mass containing 75.0g of water, at 20oC. Assuming no heat exchange with the surroundings (a) what is the final temperature of the iron? (b) what is the final

17. ## physics

A piece of iron block moves across a rough horizontal surface before coming to rest. The mass of the block is 1.8 kg, and its initial speed is 3.8 m/s. How much does the block's temperature increase, if it absorbs 69% of its initial kinetic energy as

18. ## science

1125 J of energy is used to heat 250 g of iron to 55 °C. The specific heat capacity of iron is 0.45 J/(g·°C). What was the temperature of the iron before it was heated?

19. ## Chemistry

Two iron bolts, one at 100. °C with a mass of 52.8g, the other at 56.0°C with a mass of 66.8g, are placed in an insulated container. Assuming the heat capacity of the container is negligible, what is the final Celsius temperature inside the container (c

20. ## physics

Years ago, a block of ice with a mass of about 22kg was used daily in a home icebox. The temperature of the ice was 0.0 degrees Celsius when delivered. As it melted, how much heat did a block of ice that size absorb? The latent heat of fusion of water is

21. ## science

Two blocks of different temperatures are brought together. Block A is a 360.0-kg block is made of Material X which has a temperature-dependent specific heat. Its initial temperature is TA = 200.0¡ã C. Block B is a 1000.0-kg iron block with an initial

22. ## Conceptual Physics

A 120-g chunk of 90 ∘C iron is dropped into a cavity in a very large block of ice at 0∘C. What is the mass of ice that melts. (The specific heat capacity of iron is 0.11 cal/g⋅∘C.).

23. ## physics

A 44.0-g block of ice at -15.0°C is dropped into a calorimeter (of negligible heat capacity) containing of water at 5.0°C. When equilibrium is reached, how much of the ice will have melted? The specific heat of ice is 2090 J/kg ∙ K, that of water is

24. ## physics

The latent heat of fusion for water is 33.5 × 104 J/kg, while the latent heat of vaporization is 22.6 × 105 J/kg. What mass m of water at 0 °C must be frozen in order to release the amount of heat that 2.32 kg of steam at 100 °C releases when it

25. ## physics

A 40g chunk of 90 degree C iron is dropped into a cavity in a very large block of ice at 0 degree C.Find what mass of ice will melt. (The specific heat capacity of iron is 0.11 cal/g degree C)

26. ## PHYSICS

The latent heat of fusion for water is 33.5 × 104 J/kg, while the latent heat of vaporization is 22.6 × 105 J/kg. What mass m of water at 0 °C must be frozen in order to release the amount of heat that 2.47 kg of steam at 100 °C releases when it

27. ## Chemistry!

The heat lost or gained by a system is related to its temperature change by a property called its heat capacity. The molar heat capacity of metals at or above room temperature equals 24.92 J K-1mol-1. The temperature of a block of copper metal (molar mass

28. ## chemistry

a 2kg block of iron is given 10kj of energy and its temperature rises by 10c. what is the specific heat capacity of iron?

29. ## Science - Chemistry!!!

A lead bullet with a mass of 8.50 g traveling at 4.80 x 102 m/s strikes a 2.00 kg block of wood and is embedded in it. Both the bullet and the block are initially at 25.0°C. Assume that no heat is lost to the surroundings and that all the kinetic energy

30. ## chemistry

If 100. g of iron at 100.0 C is placed in 200. g of water at 20.0 C in an insulated container, what will the temp, C, of the iron and the water ( C value is 4.18) when both are at the same temp? The specific heat of iron is 0.444 KJ/Kg C ---- steps would

31. ## physics

A 40-kg block of ice at 0°C is sliding on a horizontal surface. The initial speed of the ice is 7.0 m/s and the final speed is 4.7 m/s. Assume that the part of the block that melts has a very small mass and that all the heat generated by kinetic friction

32. ## Physics :)

A block of iron at 39.0°C has mass 2.30 kg. If 3.50×104 J of heat are transferred to the block, what is its resulting temperature? The specific heat of iron is 449 (J/kg*K) Someone else had this question on here but I cannot get the right answer from the

33. ## Physics

An iron block of the mass 1 kg is suspended on a spring of the spring constant 140 N/m, and merged into a vessel with 8 liters of water. The mass is displaced by 10 cm from its equilibrium position, and released. How much energy in J has been dissipated by

34. ## Chemistry

Hydrogen is burned in oxygen to release heat. How many grams of hydrogen gas must be burned to release enough heat to warm a 50.0 g block of iron, giving 5 mol of water? 2 H2(g) + O2(g) → 2 H2O(g) ΔH = −484 kJ Iron has a specific heat of 0.449

35. ## Physics

A block of iron at 415°C is put into a 0.625 kg tub of water at 15.0°C. They come to equilibrium at 100°C, and 0.144 kg of the water boils off to steam. What is the mass of the iron block? Please help, it keeps saying I have the wrong answer.

36. ## college chem

In this experiment a hot metal block at 100oC is added to cold water in a calorimeter. The heat lost by the metal block equals the heat gained by the water and the two end up at the same temperature. In one experiment, the mass of the metal block is 89.5

37. ## Chemistry

I want to know the enthalpy change for this reaction which occurs in a blast furnace: Fe2O3(s) + 3C(s) --> 2Fe(l) + 3CO(g) You will need the heat of formation for CO, and ironIIIoxide, and the heatofmelting for iron. I suspect you have some temperature in

38. ## Physics

Objects A and B have the same mass of 4.3 kg and are at their melting points. They melt when 4.9 × 104 J of heat is added to A and when 12 × 104 J is added to B. (a), (b) Determine the latent heat of fusion for the substance from which each object is

39. ## physics

Objects A and B have the same mass of 3.4 kg and are at their melting points. They melt when 4.9 × 104 J of heat is added to A and when 11 × 104 J is added to B. (a), (b) Determine the latent heat of fusion for the substance from which each object is

A lead bullet with a mass of 8.50 g traveling at 4.80 x 102 m/s strikes a 2.00 kg block of wood and is embedded in it. Both the bullet and the block are initially at 25.0°C. Assume that no heat is lost to the surroundings and that all the kinetic energy

41. ## Chemistry

1125 J of energy is used to heat 250 g of iron to 55 °C. The specific heat capacity of iron is 0.45 J/(g·°C). What was the temperature of the iron before it was heated? 55 °C 35 °C 20 °C 45 °C Not sure how to solve this problem, can anyone walk me

42. ## chem

A sample of iron absorbs 71.1 J of heat, upon which the temperature of the sample increases from 21.5°C to 28.8°C. If the specific heat of iron is 0.450 J/g-K, what is the mass (in grams) of the sample?

43. ## Physics.

A block of mass 3m is placed on a frictionless horizontal surface, and a second block of mass m is placed on top of the first block. The surfaces of the blocks are rough. A constant force of magnitude F is applied to the first block. a) Identify the

44. ## PHYSICS

1. A 500.0 g metal block absorbs 1.125 × 104 J of heat to raise its temperature by 50.0 K. What is the substance?

45. ## Chemistry Science

A piece of iron with a mass of 35 g is heated to 1305oC and then placed in a calorimeter containing 600 g of water. The temperature of the water increases from 25oc to 33oC. The specific heat of water is 4.184 J/g X C. Calculate the specific heat of the

46. ## Physics

A blacksmith dropped a1.5kg iron bead at 300 degree Celsius into some quantity of water , if the temperature of the water rose from 15 to 18 Celsius, what is the mass of water assuming no heat is lost to the surrounding ( take specific heat of iron as

47. ## physics

A granite column in a building is 8.50 m high and has a mass of 2.16 multiplied by 104 kg. (a) How much heat (J) is needed to increase its temperature by 10.5°C, given its specific heat is 0.200 kcal/kg·°C? (b) What is its change in length (m) if its

48. ## AP Chem

I missed a lab in class a week ago and had to make it up just the other day. My teacher didn't have time to explain the lab to me, so he gave me a brief overview of the procedure. The objective of the lab was to calculate the specific heat of an unknown

49. ## Chem

Determine the mass of iron heated to 85 Celsius to add to 54.0g of ice to produce water at 12.5 Celsius. The speciic heat of iron is 0.045J/g C What steps do I take to solve this problem? Thanks

50. ## thermochemistry

what is the mass of a lead block that if heated to 100.0 dgrs C and placed in a container with 50.0g of ice at 0.00dgrs C produces a final water sample of 15.0dgrs C? Sh of Pb= 0.128J/g dgrsC step by step solution and answer q1 for Pb block = mass x sp.h.

51. ## Physics

A 0.9-kg block (mass m) and a second block (mass M) are both initially at rest on a frictionless inclined plane. Mass M rests against a spring that has a force constant of 12.2 kN/m. The distance d along the plane between the two blocks is 3.64 m. The

52. ## high school physics static friction

The system shown below is in equilibrium. Using the fact that block A is placed on a table, has a normal force of 40.2 N and it is not moving, what is the coefficient of static friction on block A? I know you can't answer this but if you have any

53. ## Physics

A block of iron at 39.0°C has mass 2.30 kg. If 3.50×104 J of heat are transferred to the block, what is its resulting temperature?

54. ## science

a 400 kg block of iron is heated from 295 k to 325 k. how much heat is absorbed by the iron? ( the specific heat is 450 j. /kg. k)

55. ## Physics

A 0.300 kg iron horseshoe that is initially at 550°C is dropped into a bucket containing 19.4 kg of water at 21.1°C. What is the final equilibrium temperature (in °C)? Neglect any heat transfer to or from the surroundings. Do not enter units. I'm taking

56. ## Physics

I got part a and b, but not c. We are trying to find delta T in part c, but I'm still confused on where to start even with the help. (a) An iron block of the mass 1.2 kg is suspended on a spring of the spring constant 140 N/m, and merged into a vessel with

57. ## Chemistry

The heat lost or gained by a system is related to its temperature change by a property called its heat capacity. The molar heat capacity of metals at or above room temperature equals 24.92 J K-1mol-1. The temperature of a block of copper metal (molar mass

58. ## math

a 150g-iron ball at 95 Celsius is dropped into a cavity in a block of ice.the cavity is then found to contain 21 g of water . CALCULATE THE HEAT OF FUSION OF ICE (The specific heat capacity of iron is 0.11 cal/g x C degrees.)

59. ## Physics

A block of wood of mass 0.91 kg is initially at rest. A bullet of mass 0.047 kg traveling at 104.7 m/s strikes the block and becomes embedded in it. With what speed do the block of wood and the bullet move just after the collision?

60. ## Science

A lead bullet with a mass of 8.50 g traveling at 4.80 x 102 m/s strikes a 2.00 kg block of wood and is embedded in it. Both the bullet and the block are initially at 25.0°C. Assume that no heat is lost to the surroundings and that all the kinetic energy

61. ## chemistry

I have two problems that I'm stumped on. I know the correct anwers but I'm having problems coming up with the co rrect anwsers. Here are the problems: 1) Magnesium has a density of 1.7g/cm^3 and iron has density of 7.9 g/cm^3. A block of iron has a mass of

62. ## physics

Two blocks move along a linear path on a nearly frictionless air track. One block, of mass 0.104 kg, initially moves to the right at a speed of 4.70 m/s, while the second block, of mass 0.208 kg, is initially to the left of the first block and moving to

63. ## Chemistry

Equation: Fe+CuCl2>FeCl2+Cu We put two iron nails into the copper chloride solution:1. mass of empty dry beaker:103.64 2. mass of two iron nails, before reaction:1.20 3. mass of two iron nails after reaction: 1.01 4. mass of beaker and copper (dry):104.4

64. ## chemistry

Liquid elemental iron is produced in the thermite reaction because enough heat is generated to melt the iron: 2 Al(s) + Fe2O3(s)----> Al2O3(s) + 2 Fe(l) What mass of aluminum is needed to produce 750 grams of iron?

65. ## chemistry

15. Liquid elemental iron is produced in the thermite reaction because enough heat is generated to melt the iron: 2 Al(s) + Fe2O3(s)----> Al2O3(s) + 2 Fe(l) What mass of aluminum is needed to produce 750 grams of iron?

66. ## Chemistry (specific heat)

1125 J of energy is used to heat 250 g of iron. After heating, the final temperature of the iron is measured as 55 °C. The specific heat capacity of iron is 0.45 J/(g·°C). What was the initial temperature of the iron?

67. ## Science 9

2.0kg block of iron transfers 180,000j to the atmosphere around it. If its initial temperature was 350 celius what is it's final temperature? If you know the specific heat of iron, you can use Q = mc(delta T).

68. ## Chemistry

3490 J of heat are added to a 20.4 g sample of iron at 20◦C. What is the final temperature of the iron? The specific heat of iron is 0.449 J/g · K. Answer in units of K.

69. ## chemistry

3960 J of heat are added to a 27.6 g sample of iron at 25 ◦ C. What is the ﬁnal temperature of the iron? The speciﬁc heat of iron is 0.449 J/g · K. Answer in units of K

70. ## Chemistry

The density of iron is 7.87 . What is the mass of a (variable l)* 4.00cm * 1.00 cm block of iron?

71. ## intro chem HELp please

1. Zinc is often used to calibrate calorimeters because it undergoes a very sharp phase transition from the solid to the liquid at 419.5oC. Calculate the enthalpy change when 5 g of zinc metal is heated from 100oC to the point where the entire sample is

72. ## chemistry

The density of iron is 7.87 . What is the mass of a l* 4.00cm * 1.00 cm block of iron?

73. ## chemistry

The specific heat of iron is 0.498 J/g °C. If 341 J of heat is added to 154.1 g of iron at 25.0 °C, what is the new temperature of the iron?

74. ## Physics

A solid iron cylinder of mass 0.2 kg is quickly transferred from inside boiling water in a beaker at 100 C into 90g of water at 15 C contained in a calorimeter of mass 150g and specific heat capacity equal to 800 J/kg/K. Find the final temperature of the

75. ## Physics

A blacksmith dropped a 1.5kg iron bead at 300c into some quantity of water. If the temperature of the water from 15c to 18c, what is the mass of water assuming no heat is lost to the surrounding?(Take the specific heat of iron as 0.46jkg-1 and that of

76. ## chemistry

The heat lost or gained by a system is related to its temperature change by a property called its heat capacity. The molar heat capacity of metals at or above room temperature equals 24.92 J/K.mol. The temperature of a block of lead (MM 207.2) was raised

77. ## physics

A 500.0 g metal block absorbs 1.125 × 104 J of heat to raise its temperature by 50.0 K. What is the substance? Specific Heats of Selected Substances ______________________________________ Substance C [J/(kg•K)] Water (ice-)2,060 Iron-450 Aluminum-897

78. ## CHEMISTRY

Suppose a sample of hot iron is dropped in a cup of room temperature water. a) what happens to the temperature of the iron & water? b.) in what direction does heat flow occur? c.) when does heat flow stop? d.) assuming no heat is lost to the environment,

79. ## chemistry

Final temp of a block of iron if 0.87g of water condenses on a 85.0g block of iron that is initially at 20 degrees Celsius.

80. ## Chemistry

A 67gr mass of solid iron is heated by a flame until the temp of the iron equals the temp of the flame. The solid iron is then dropped into 250gr of liquid water at 26 degrees C. After 5 mins, the iron and the water are both at 47 degrees C. Specific heat:

81. ## Physics

A beaker of mass 5kg containing oil of mass 17.4 kg and density 8.5 x102kg/m3 rests on the scale A block of iron of mass 6.7kg is suspended from the spring scale and completely submerged in the oil as shown in Figure below. Determine the equilibrium

82. ## physics

a circular plastic dish of radious 2 cm is floating in a bucket of water. A small iron block is placed gently in it. It sink by 1cm find the mass of the block

83. ## physics

A copper block with a mass 1.82 kg is given an initial speed of 3.5 m/s on a rough horizontal surface. Because of friction, the block finally comes to rest. Assume that 77.4 % of the initial kinetic energy is absorbed by the block in form of heat, what is

84. ## Physics

A block of mass 3m is placed on a frictionless horizontal surface, and a second block of mass m is placed on top of the first block. The surfaces of the blocks are rough. A constant force of magnitude F is applied to the first block. Assume that the upper

85. ## Physics

Work it out. How many joules of heat is given out when pieces of iron of mass 50g and specific heat capacity =460kgk cools from 80¡èc to 20¡èc?

86. ## Chemistry

Calculate the heat transferred when a 23 g of iron nail is cooled from 67oC to 20oC. The specific heat of iron is 0.45 J/goC.

87. ## chemistry

Calculate the final temperature if 50 kg of iron is heated from 15.0°C with 5000 kJ of heat. The molar heat capacity of iron is 25.08 J mol–1 K–1.

88. ## chemistry

Calculate the heat transferred when a 8 g of iron nail is cooled from 50oC to 18oC. The specific heat of iron is 0.45 J/goC.

89. ## chemistry

Determine mass of iron heated to 85.0 degrees C to add to 54.0 g of ice to produce water at 12.5 degrees C. The specific heat of iron is 0.045 J/g C.

90. ## Chemistry

How much heat is needed to raise the temperature of 5.58 kilograms of iron from 20.0°C to 1000.0°C? Specific heat of iron is 450,000 J/(kg x °C). Type the correct answer to 3 significant digits.

91. ## Chemistry

Thank you so much for the help on my other question!!! An alloy (solution of metals) is 80% by volume iron. The rest is aluminum. Aluminum has a density of 2.70 g/cm³, and iron's is 7.87 g/cm³. A block of alloy measures 2.0 ft. wide and 3.0 ft. long. If

92. ## physics

In the Figure the pulley has negligible mass, and both it and the inclined plane are frictionless. Block A has a mass of 1.3 kg, block B has a mass of 2.7 kg, and angle è is 26 °. If the blocks are released from rest with the connecting cord taut, what

93. ## Physics B

A 40-kg block of ice at 0°C is sliding on a horizontal surface. The initial speed of the ice is 7.0 m/s and the final speed is 4.7 m/s. Assume that the part of the block that melts has a very small mass and that all the heat generated by kinetic friction

94. ## Physic II

A 992.0-g iron meteor impacts the earth at a speed of 1447.0 m/s. If its energy is entirely converted to heat of the meteorite, what will the resultant temperature rise be? (The specific heat for iron is 113 cal/kg.C)

95. ## Chemistry

A 35g sample of Fe is dropped into 80g of water at 20 degrees Celsius. What is the final (equilibrium) temperature of the iron/water? This isn't really a chemistry problem. There will be no chemical reaction. It is a heat capacity (physics) problem. Use

96. ## Chemistry

if 6.5kJ of energy are added to 56.4g sample of iron at 24 degrees C what is the final temperature of the iron? The specific heat of iron is 0.449j/gC

97. ## Physics

Two copper blocks, each of mass 2.12 kg, initially have different temperatures,t1 = 18° C and t2 = 26° C. The blocks are placed in contact with each other and come to thermal equilibrium. No heat is lost to the surroundings (a) Find the final temperature

98. ## chemistry

Answer the following questions about Fe(NO3)3. a. What is the mass percent of iron in this compound? b. A different iron compound is 34.43% by mass iron. What mass of this compound is needed to get 125g of pure iron?

99. ## Physics

A wooden block and a lead ball are connected by a light string that passes over a frictionless pulley. The block has a mass of 6kg and the ball has a mass of 2kg. after they are released from rest, the block will slide along the wooden ramp. a.) which

100. ## Physics

A 10 kg block of ice has a temperature of -13°C. The pressure is one atmosphere. The block absorbs 4.10 106 J of heat. What is the final temperature of the liquid water? I multiplied 10kg by -13 and divided by the heat absored by the block 4.10*10^6 but i