1. physics

    A 0.57 kg block oscillates back and forth along a straight line on a frictionless horizontal surface. Its displacement from the origin is given by x = (13 cm)cos[(20 rad/s)t + π/2 rad] (a) What is the oscillation frequency (in Hz)? (b) What is the maximum

    asked by Anonymous on January 10, 2011
  2. science

    A 3 kilogram block sits at rest on a frictionless surface. A force of 12 Newtons is applied to the block. How fast is the mass moving after 2 seconds?

    asked by Shaine on January 26, 2010
  3. Physics

    A 60 kg block slides along the top of a 100 kg block with an acceleration of 3.0 m/s2 when a horizontal force F of 320 N is applied. The 100 kg block sits on a horizontal frictionless surface, but there is friction between the two blocks. (a) Find the

    asked by Henry on October 12, 2011
  4. physics

    The goliath beetle, can reach a mass of 0.080 kg. Suppose a goliath beetle is placed on a slope that makes an angle of 37.0 degrees with the horizontal. Find the acceleration of the beetle along the slope, assuming the slope is frictionless. If a force of

    asked by lalaglaze on October 11, 2009
  5. physics

    Two blocks are tied together with a string as shown in the diagram.(There is a block on a horizontal incline, its mass is 1.0kg, there is a rope connecting that block to a pulley which then connects to another block that is 2.0kg. The angle of the incline

    asked by mercedes on October 22, 2010
  6. physics

    A 4 kg wooden block rest on a table. the coefficient of friction between the block and the table is .40. a 5kg mass is attached to the block by a horizontal string passed over a frictionless pulley of neglible mass what is the acceleration of the block

    asked by Tori carr on February 3, 2010
  7. physics

    A 10kg block slides towards the 3kg moving block to create a totally inelastic head on collision. The 3kg block comes to a stop after the collision. 1. What speed must the 10kg block be moving at prior to the collision for this to occur? 2. Instead of

    asked by anna on April 27, 2016
  8. Physics

    The two blocks (m = 37 kg and M = 109 kg) in the figure below are not attached to each other. The coefficient of static friction between the blocks is µs = 0.55, but the surface beneath the larger block is frictionless. What is the minimum magnitude of

    asked by Jane on October 28, 2009
  9. science

    Two forces, of magnitudes F_1 = 85.0 N and F_2 = 45.0 N, act in opposite directions on a block, which sits atop a frictionless surface, as shown in the figure. Initially, the center of the block is at position x_i = -4.00 cm. At some later time, the block

    asked by BRIJ on November 24, 2010
  10. A 3.5 kg block, initially in motion, is pushed along a horizontal floor by a force F of magnitude 17 N at an angle θ = 35° with the horizontal (Figure 6-20). The coefficient of kinetic friction between the block and floor is 0.25. (Assume the positive

    asked by Sam on July 14, 2010
  11. physics

    A 3.5 kg block, initially in motion, is pushed along a horizontal floor by a force F of magnitude 17 N at an angle θ = 35° with the horizontal (Figure 6-20). The coefficient of kinetic friction between the block and floor is 0.25. (Assume the positive

    asked by Sam on July 14, 2010
  12. Physics

    What force would you have to exert on a 326-N trunk up a 19.0° inclined plane so that it would slide down the plane with a constant velocity? What would be the direction of the force? (The coefficient of friction between the plane and the trunk is 0.328.)

    asked by Jane on December 16, 2007
  13. Physics

    A 4.1 kg block is attached to a spring with a force constant of 550 N/m , as shown in the figure. Find the work done by the spring on the block as the block moves from A to B along paths 1 and 2. W=? How do your results depend on the mass of the block?

    asked by Jenna on October 12, 2009
  14. College Physics (repost)

    A 4.1 kg block is attached to a spring with a force constant of 550 N/m , as shown in the figure. Find the work done by the spring on the block as the block moves from A to B along paths 1 and 2. W=? How do your results depend on the mass of the block?

    asked by Jenna on October 13, 2009
  15. Physics

    I THINK SOMEONE HAS THIS SAME QUETION! A massless spring of constant k = 91.0 N/m is fixed on the left side of a level track. A block of mass m = 0.50 kg is pressed against the spring and compresses it a distance of d. The block (initially at rest) is then

    asked by Gage on November 4, 2010
  16. physics

    Can someone please help me solve this: An 7.74g bullet is fired into a 320g block that is initially at rest at the edge of a frictionless table of height h = 1.07 m The bullet remains in the block, and after the impact the block lands d = 2.07 m from the

    asked by Jackie on February 27, 2012
  17. Physics

    Sanding block weighs 2.0 N and is pushed with a force of 3.0 N at an angle of 30.0 degrees with respect to the vertical, and angled toward the wall. Moves straight up the wall at a constant speed. What is the coefficient of kinetic friction between the

    asked by Tammy on September 6, 2010
  18. physics

    A 1.4-m-long massless rod is pivoted at one end and swings around in a circle on a frictionless table. A block with a hole through the center can slide in and out along the rod. Initially, a small piece of wax holds the block 20 from the pivot. The block

    asked by Anonymous on April 28, 2012
  19. physics

    What's the solution of a body of weight 100N resting on a plane which is inclined at 30° to the horizontal with the components of the weight parallel and perpendicular to the plane?

    asked by Rose khonje on February 6, 2016
  20. physics

    A 2 kg block with initial velocity +2m/s collides with a stationary 6 kg block with initial velocity 0m/s on a frictionless surface. After the collision, the 2 kg block is moving at –1 m/s and the 6kg block is moving to the right at +1 m/s. Show that the

    asked by mable on December 12, 2016
  21. Physics

    A 5kg block is being pulled on a horizontal frictionless surface. The tension in the string is 30N. What is the total work done on the block as it moves a distance of 10 meters? Thank you very much!

    asked by Steve on March 20, 2016
  22. physical science

    A 0.5 kg block initially at rest on a frictionless, horizontal surface is acted upon by a force of 5.0 N for a distance of 4.0 m. How much kinetic energy does the block gain? What is its final velocity?

    asked by Bia on February 18, 2015
  23. Physics URGENT!!!

    A massless spring of constant k =84.8 N/m is fixed on the left side of a level track. A block of mass m = 0.5 kg is pressed against the spring and compresses it a distance d, as in the figure below. The block (initially at rest) is then released and

    asked by Mel on October 27, 2012
  24. physics

    A massless spring of constant k =60.9 N/m is fixed on the left side of a level track. A block of mass m = 0.7 kg is pressed against the spring and compresses it a distance d, as in the figure below. The block (initially at rest) is then released and

    asked by Anonymous on November 5, 2012
  25. Physics URGENT!!!

    : A massless spring of constant k =84.8 N/m is fixed on the left side of a level track. A block of mass m = 0.5 kg is pressed against the spring and compresses it a distance d, as in the figure below. The block (initially at rest) is then released and

    asked by Meg on October 29, 2012
  26. Physics- Elena please help!

    A massless spring of constant k =84.8 N/m is fixed on the left side of a level track. A block of mass m = 0.5 kg is pressed against the spring and compresses it a distance d, as in the figure below. The block (initially at rest) is then released and

    asked by Meg on October 29, 2012
  27. physics

    A block of mass 2kg slides down a plane having an inclination of ƒá=15.0„a . Ignore friction. The block starts from rest at the top of the incline and the length of the incline is 2.00m. The velocity of the block when it reaches the bottom of the

    asked by hamed on March 27, 2011
  28. Physics

    An ideal spring with a stiffness of 329 N/m is attached to a wall, and its other end is attached to a block that has a mass of 15.0 kg. The spring/block system is then stretched away from the spring's relaxed position until 57.0 J of mechanical energy is

    asked by John on December 4, 2009
  29. physics

    A small block of mass 2.7 kg is released from rest at the top of the curved frictionless ramp shown. The block slides down the ramp and is moving with a speed of 13.9 m/s when it collides with a larger block (1.5 times the mass). (Use g=10m/s²). If the

    asked by juan on April 2, 2016
  30. physics

    An m1 = 8.40 g bullet is fired into a m2 = 2.17 kg block that is initially at rest at the edge of a frictionless table of height h = 1.13 m. The bullet remains in the block, and after impact the block lands d = 1.76 m from the bottom of the table.

    asked by Anonymous on October 18, 2009
  31. physics

    A 16.0-g bullet is shot into a wooden block at rest with mass 4550 g on a frictionless surface. The bullet strikes and is lodged in the block, causing is to slide at a speed of 1.20 m/s. Find the speed of the bullet (in m/s) before striking the block.

    asked by Matt on July 23, 2016
  32. Physics

    An 8 g bullet is shot into a 4.0 kg block, at rest on a frictionless horizontal surface. The bullet remains lodged in the block. The block moves into a spring and compresses it by 9.4 cm. The spring constant is 1000 N/m. What is the initial velocity of the

    asked by Sarah on June 30, 2009
  33. Physics

    Speed: A block lies on a horizontal frictionless surface. A horizontal force of 100 N is applied to the block, giving rise to an acceleration of 3 m/s2. What is the speed of the block after 10s? I think I would just multiple the two and put it in terms of

    asked by Rachel on February 25, 2015
  34. physics

    Question Part Points Submissions Used 1 2 3 4 5 –/5 –/5 0/5 –/5 2/2 0/10 0/10 1/10 0/10 2/10 Total 2/22 A block of mass m = 2.00 kg is released from rest at h = 0.400 m from the surface of a table, at the top of a θ = 35.0° incline as shown below.

    asked by carlton on October 20, 2011
  35. Physics

    A block of mass 3 kg is at rest on an incline. The coefficient of state friction between the block and incline is 0.34. What is the maximum angle of the incline such that the block will not slide down the plane?

    asked by Amy on February 17, 2013
  36. physics

    An unknown force pushes a 17 kilogram block across a smooth frictionless floor. Three seconds after the force is first applied to the block , the block is moving with a speed of 6 meters per second. What is the magnitude of the the unknown force in

    asked by Susie on November 25, 2011
  37. Math

    A weight of 150 lbs is placed on a smooth plane inclined at an angle of 24° with the horizontal. What is the required force needed to prevent the weight from sliding down the plane?

    asked by Alexa on July 30, 2015
  38. physics

    a body of massb20kg slides down a plane inclined at 30degree to the horizontal if a constant resting force of 40N act on the body it acceleration down the plane is what?

    asked by favour on November 25, 2016
  39. Physics

    A 300kg bobsled starts down an icy slope inclined at 12 degrees. There is some friction between the bobsled and the slope. Write the equations of motion in the two directions where the x axis is along the hillside.

    asked by Anon on October 2, 2016
  40. Physics

    A 5.00 kg carrying a charge of Q=60 uC is connected to a spring for which k=100N/m. The block lies on a frictionless horizontal track and the system is immersed in a uniform electric field of E=5.0e5 V/m. If the block is released from rest when the spring

    asked by Jona F on March 28, 2012
  41. Physics

    A 5.00 kg carrying a charge of Q=60 uC is connected to a spring for which k=100N/m. The block lies on a frictionless horizontal track and the system is immersed in a uniform electric field of E=5.0e5 V/m. If the block is released from rest when the spring

    asked by Jona F on March 29, 2012
  42. physics

    I am trying to study for my exam i have tomorrow and this type of problem keeps giving me trouble can someone please help me:: A 3.24 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=11.8N at an angle

    asked by Amanda on January 30, 2012
  43. physics

    A 3.5 kg block, initially in motion, is pushed along a horizontal floor by a force F of magnitude 19 N at an angle θ = 45° with the horizontal. The coefficient of kinetic friction between the block and floor is 0.25. (Assume the positive direction is to

    asked by maya on November 18, 2010
  44. physics

    An unknown force pushes a 17 kilogram block across a smooth (frictionless) floor. Three seconds after the force is first applied to the block, the block is moving with a speed of 6 meters per second. What is the magnitude of the unknown force?

    asked by Anonymous on July 24, 2012
  45. physics

    An unknown force pushes a 17 kilogram block across a smooth (frictionless) floor. Three seconds after the force is first applied to the block, the block is moving with a speed of 6 meters per second. What is the magnitude of the unknown force?

    asked by Anonymous on January 3, 2012
  46. PHYSICS HELP

    A 525-N trunk is placed on an inclined plane that forms an angle of 30.0 degrees with the horizontal. What are the components of the weight parallel to the plane and normal to the plane? Memorize this: weight normal = mg cosTheta weight parallel= mg Sin

    asked by Suzanne on October 17, 2006
  47. physics

    Two blocks are connected by a lightweight cord that passes over a frictionless, massless pulley. The bottom block has a mass of 2.00 kg and the top block has mass 0.500 kg. The coefficient of kinetic friction at each sliding surface is equal to 0.10. The

    asked by Cali on February 17, 2015
  48. AP Physics

    Block A (mass 40 kg) and block B (mass 80 kg) are connected by a string of negligible mass as shown in the figure. The pulley is frictionless and has a negligible mass. If the coefficient of kinetic friction between block A and the incline is μk = 0.27

    asked by Ashley on November 29, 2016
  49. physics

    Block A (mass 40 kg) and block B (mass 80 kg) are connected by a string of negligible mass as shown in the figure. The pulley is frictionless and has a negligible mass. If the coefficient of kinetic friction between block A and the incline is μk = 0.27

    asked by Diego on November 30, 2012
  50. physics

    Block A (mass 40 kg) and block B (mass 80 kg) are connected by a string of negligible mass as shown in the figure. The pulley is frictionless and has a negligible mass. If the coefficient of kinetic friction between block A and the incline is μk = 0.27

    asked by Diane on November 30, 2012
  51. Physics

    A box slides down an inclined plane with an acceleration that is precisely two-thirds what it would have been if the slide had been frictionless. Calculate the angle of the incline if the coefficient of kinetic friction of the rough incline is 0.29 I know

    asked by Bex on September 29, 2016
  52. Physics

    A 4 kg block slides down a frictionless incline making an angle of 60° with the horizontal. (a) What is the total work done on the block when the block slides 2 m (measured along the incline)? (b) What is the speed of the block after it has slid 1.5 m if

    asked by Jenni on November 4, 2010
  53. Physics

    A 5.1–kg block is pulled along a frictionless floor by a cord that exerts a force P = 12 N at an angle θ = 25° above the horizontal, as shown below. (a) What is the acceleration of the block? (b) The force P is slowly increased. What is the value of P

    asked by Chrxeyshthoufov on February 23, 2014
  54. physics

    In Figure (1), a 3.50 g bullet is fired horizontally at two blocks at rest on a frictionless table. The bullet passes through block 1 (mass 1.13 kg) and embeds itself in block 2 (mass 1.75 kg). The blocks end up with speeds v1 = 0.600 m/s and v2 = 1.32 m/s

    asked by kristy on November 13, 2013
  55. Physics

    A solid disk is released from rest and rolls without slipping down an inclined plane that makes an angle of 25.0° with the horizontal. What is the speed of the disk after it has rolled 3.00 m, measured along the plane?

    asked by Sam on October 29, 2010
  56. physics

    A 0.940 kg block is attached to a horizontal spring with spring constant 2550 N/m. The block is at rest on a frictionless surface. A 7.90 g bullet is fired into the block, in the face opposite the spring, and sticks. What was the bullet's speed if the

    asked by zidd on April 13, 2010
  57. Physics

    A small block on a frictionless horizontal surface has a mass of 2.50×10−2 Kg. It is attached to a massless cord passing through a hole in the surface. The block is originally revolving at a distance of 0.300 m from the hole with an angular speed of

    asked by Christina on November 7, 2007
  58. Physics

    A block of mass m1 is on top of a block of mass m2. Block 2 is connected by an ideal rope passing through a pulley to a block of unknown mass m3 as shown. The pulley is massless and frictionless. There is friction between block 1 and 2 and between the

    asked by XYZ on June 22, 2013
  59. Physics

    A contestant in a winter games event pushes a 59.0 kg block of ice across a frozen lake as shown in the figure below. The coefficient of static friction is 0.1 and the coefficient of kinetic friction is 0.03. The block is being pushed at a direction of 23

    asked by Mariah on February 17, 2015
  60. physics

    A skateboarder in a death defying stunt decides to launch herself from a ramp on a hill. The skateboarder leaves the ramp at a height of 1.4m above the slope, traveling 15m/s and at an angle of 40 degrees to the horizontal. The slope is inclined at 45

    asked by carolyn on February 25, 2015
  61. physics

    A skateboarder in a death defying stunt decides to launch herself from a ramp on a hill. The skateboarder leaves the ramp at a height of 1.4m above the slope, traveling 15m/s and at an angle of 40 degrees to the horizontal. The slope is inclined at 45

    asked by carolyn on February 25, 2015
  62. Physics

    A small block with a mass of m = 0.120 kg is attached to a cord passing through a hole in a frictionless, horizontal surface. The block is originally revolving at a distance of 0.40 m from the hole with a speed of 0.70 m/s. The cord is pulled from below,

    asked by Sonya on May 20, 2014
  63. physics

    The horizontal surface on which the block of mass 5.2 kg slides is frictionless. The force of 64 N acts on the block in a horizontal direction and the force of 128 N acts on the block at an angle as shown below. 5.2 kg 128 N 60 ◦ 64 N What is the

    asked by Anonymous on December 21, 2012
  64. physics

    A 3.90 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=14.1N at an angle theta=32.5degrees above the horizontal, as shown. a.) What is the magnitude of the acceleration of the block when the force is applied?

    asked by Carly on October 8, 2015
  65. Physics

    A(n) 7 g bullet is fired into a 122 g block that is initially at rest at the edge of a frictionless table of height 0.9 m. The bullet remains in the block, and after impact the block lands 1.7 m from the bottom of the table.The acceleration of gravity is

    asked by amanda and leah on January 16, 2012
  66. phsyics

    an 8g bullet is shot into a 4kg block at rest on a frictionless horizontal surface. the bullet remains lodged in the block. the block movies into a spring and compresses it by 3cm. the force constant of the spring is 1500N/m. the initial speed of the

    asked by joyce on November 6, 2008
  67. physics

    A 5 kg block is placed near the top of a frictionless ramp, which makes an angle of 30o degrees to the horizontal. A distance d = 1.3 m away from the block is an unstretched spring with k = 3000 N/m. The block slides down the ramp and compresses the

    asked by Mel on March 12, 2012
  68. mechanics and heat

    A tennis ball of mass m and radius R = 3 cm rolls up without slipping an inclined plane of inclination angle of 37 degree as shown in the figure at the bottom of the incline the center of mass velocity of the ball is v = 10 m/s . The ball stops after

    asked by awash on January 8, 2015
  69. physics

    a box slides down a smooth inclined plane 30m long and 10m high.determine the speed of the box at the bottom of the plane if it starts from rest at the top.

    asked by Anonymous on July 4, 2011
  70. physics

    Two blocks are connected by a very light string passing over a massless and frictionless pulley (the figure ). Traveling at constant speed, the 20.0- block moves 70.0 to the right and the 12.0- block moves 70.0 downward.During this process, how much work

    asked by john on July 2, 2010
  71. Physics

    A 21.1 g ball of clay is thrown horizontally at + 38.7 m/s toward a 1.2 kg block sitting at rest on a frictionless surface. The clay hits and sticks to the block. A. What is the speed of the block and clay right after the collision? m/s B. Use the block's

    asked by Courtney on November 8, 2012
  72. physics

    A 12.0-g piece of clay is launched horizontally at a 102-g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 52 N/m. The piece of clay sticks to the side of the block. If the

    asked by sherry on March 7, 2016
  73. physics

    A 12.0-g piece of clay is launched horizontally at a 102-g wooden block that is initially at rest on a frictionless horizontal surface and connected to a spring having spring constant 52 N/m. The piece of clay sticks to the side of the block. If the

    asked by sherry on March 8, 2016
  74. physics

    A 3.0 kg block is pushed along a horizontal floor by a force F of magnitude 19 N at an angle θ = 30° with the horizontal. The coefficient of kinetic friction between the block and floor is 0.25.(a) Calculate the magnitude of the frictional force on the

    asked by Alejandra on October 2, 2010
  75. physics

    A crate of oranges slides down an inclined plane without friction. If it is released from rest and reaches a speed of 4.883 m/s after sliding a distance of 2.01 m, what is the angle of inclination of the plane with respect to the horizontal? Please note:

    asked by lissa on March 2, 2012
  76. PHYSÝCS I

    A crate of oranges slides down an inclined plane without friction. If it is released from rest and reaches a speed of 4.883 m/s after sliding a distance of 2.01 m, what is the angle of inclination of the plane with respect to the horizontal? Please note:

    asked by ADRÝAANA on March 1, 2012
  77. Physics

    Three blocks on a frictionless horizontal surface are in contact with each other, as shown below. A force F is applied to block A (mass mA). (a) Draw a free-body diagram for each block. Determine (b) the acceleration of the system (in terms of mA, mB, mC),

    asked by Anonymous on October 22, 2010
  78. physics

    Problem A5: In the figure above, the two blocks are on frictionless inclines and are in static equilibrium. The block on the left has a mass of 48 Kg, and the block on the right has a mass of n3 Kg. If the left incline has a length of n1 meters, and the

    asked by frank on January 11, 2012
  79. Physics

    A(n) 20.5 g bullet is shot into a(n) 6254 g wooden block standing on a frictionless surface.The block, with the bullet in it, acquires a speed of 1.64 m/s. Calculate the speed of the bullet before striking the block. Thank you

    asked by jason on December 11, 2012
  80. Physics

    A(n) 20.5 g bullet is shot into a(n) 6254 g wooden block standing on a frictionless surface.The block, with the bullet in it, acquires a speed of 1.64 m/s. Calculate the speed of the bullet before striking the block. Thank you

    asked by jason on December 11, 2012
  81. Physics

    A(n) 20.5 g bullet is shot into a(n) 6254 g wooden block standing on a frictionless surface.The block, with the bullet in it, acquires a speed of 1.64 m/s. Calculate the speed of the bullet before striking the block. Thank you

    asked by jason on December 11, 2012
  82. physics

    A(n) 5 g bullet is fired into a 249 g block that is initially at rest at the edge of a frictionless table of height 1.7 m. The bullet remains in the block, and after impact the block lands 1.6 m from the bottom of the table. The acceleration of gravity is

    asked by Jason on January 7, 2012
  83. Physics

    A 5.0-g bullet traveling horizontally at an unknown speed hits and embeds itself in a 0.195-kg block resting on a frictionless table. The block slides into and compresses a 180-N/m spring a distance of 0.15m before stopping the block and bullet. Determine

    asked by BULTURP on March 11, 2014
  84. physics

    A(n) 5 g bullet is fired into a 249 g block that is initially at rest at the edge of a frictionless table of height 1.7 m. The bullet remains in the block, and after impact the block lands 1.6 m from the bottom of the table. The acceleration of gravity is

    asked by Jason on January 7, 2012
  85. physics

    block 1 has mass m1 = 480 g, block 2 has mass m2 = 540 g, and the pulley is on a frictionless horizontal axle and has radius R = 5.2 cm. When released from rest, block 2 falls 76 cm in 5.2 s (without the cord slipping on the pulley). What is the pulley's

    asked by ANS on April 1, 2013
  86. physics

    block 1 has mass m1 = 480 g, block 2 has mass m2 = 540 g, and the pulley is on a frictionless horizontal axle and has radius R = 5.2 cm. When released from rest, block 2 falls 76 cm in 5.2 s (without the cord slipping on the pulley). What is the pulley's

    asked by Ashley on April 2, 2013
  87. Physics

    A block of mass m1=1.6kg, initially moving to the right with a velocity of +4m/s on a frictionless horizontal track, colides with a massless spring attached to a second block of m2=2.1kg moving left with a velocity of -2.5m/s. The spring constant is 600

    asked by Andrea on June 6, 2013
  88. Physics

    If the block slides down the incline at a constant speed, what is the force of friction between the block and the plane?

    asked by Katherinee on January 22, 2012
  89. physics

    A 4.0 kg block is put on top of a 5.0 kg block. To cause the top block to slip on the bottom one while the bottom one is held fixed, a horizontal force of at least 16 N must be applied to the top block. The assembly of blocks is now placed on a horizontal,

    asked by Sadi on November 21, 2011
  90. Physics

    An object slides down an inclined plane of initial height of 30m.its velocity at the foot of the plane is 20m..find the fraction of the initial potential energy which is dissipated as heat

    asked by McPete on October 17, 2014
  91. Physics

    A body slides down from the rest from the top of6.4m long rough inclined plane at 30 degree with the horizontal.find the time taken by the body in reaching the bottom of the plane. Take mu k=0.2 and g=10m/s2

    asked by Anonymous on September 25, 2016
  92. Physics 12

    Ohmygoodness, I am not having a good time tonight. "A 5.2kg block sliding at 9.4 m/s across a horizontal frictionless surface collides head on with a stationary 8.6kg block. The 5.20kg block rebounds at 1.80 m/s. How much kinetic energy is lost during this

    asked by solexgirl12 on October 29, 2008
  93. PHYSICS AP

    The spring in the figure has a spring constant of 1000 N/ m. After being compressed by 15 cm it launches a 200 g block out onto a frictionless horizontal surface. The block then moves up an incline, where the coefficient of friction is 0.20, eventually

    asked by Struggler on April 23, 2014
  94. physics

    The block in the figure below lies on a horizontal frictionless surface and is attached to the free end of the spring, with a spring constant of 60 N/m. Initially, the spring is at its relaxed length and the block is stationary at position x = 0. Then an

    asked by henry on October 26, 2009
  95. physics

    A 0.250 kg block on a vertical spring with a spring constant of 5.00 103 N/m is pushed downward, compressing the spring 0.120 m. When released, the block leaves the spring and travels upward vertically. How high does it rise above the point of release?

    asked by Anonymous on January 15, 2012
  96. Physics

    A 0.260 kg block on a vertical spring with a spring constant of 5.00x10^3 N/m is pushed downward, compressing the spring 0.100 m. When released, the block leaves the spring and travels upward vertically. How high does it rise above the point of release?

    asked by Sarah on November 19, 2009
  97. Physics

    A 0.230 kg block on a vertical spring with spring constant of 4.25e3 N/m is pushed downward, compressing the spring 0.048 m. When released, the block leaves the spring and travels upward vertically. How high does it rise above the point of release?

    asked by Angela on October 14, 2012
  98. physics

    A 0.180 kg block on a vertical spring with spring constant of 4.00 ✕ 103 N/m is pushed downward, compressing the spring 0.061 m. When released, the block leaves the spring and travels upward vertically. How high does it rise above the point of release?

    asked by Anonymous on May 30, 2014
  99. physics

    A 0.250 kg block on a vertical spring with a spring constant of 5.00 103 N/m is pushed downward, compressing the spring 0.120 m. When released, the block leaves the spring and travels upward vertically. How high does it rise above the point of release? m

    asked by Anonymous on January 6, 2011
  100. physics

    A 236 kg block is released at a 4.2 m height as shown. The track is frictionless except for a portion of length 6.2 m . The block travels down the track, hits a spring of force constant k = 1483 N/m . The coefficient of kinetic fric- tion between surface

    asked by jennifer on June 24, 2014