# A 50/50 blend of engine coolant and water (by volume) is usually used in an automobile\'s engine cooling system. If your car\'s cooling system holds 4.00 gallons, what is the boiling point of the solution?

42,574 results, page 12-
## Chemistry

What is the volume of Tin(Sn)? Mass of sample = 2.588g Initial vol. of water = 31 m/L Final vol. of water = 32 m/L -
## ap chem

Assuming the volumes of all gases in the reaction are measured at the same temperature and pressure, calculate the volume of water vapor obtainable by the explosive reaction of a mixture of 725mL of hydrogen gas and 325mL of oxygen gas. andd... Calculate -
## science**

which of the following situations would be mist similar to an electrical current passing through a metal wire in a closed circuit? A. hot water moving through a pipe B. an automobile traveling through a tunnel C. an airplane flying through clouds D. a -
## science**

which of the following situations would be mist similar to an electrical current passing through a metal wire in a closed circuit? A. hot water moving through a pipe B. an automobile traveling through a tunnel C. an airplane flying through clouds D. a -
## Math

Joan needs to buy water to fill 4 empty cylindrical tanks for use by customers in her hotel. Each is 20 feet deep and has radius of 5 feet. What is the volume of water needed? -
## AP Chemistry

I am doing a lab on finding the molecular mass of a volatile liquid. I first need to find the volume of water in the test tube. (V= m/d) ... but how do I find the density of the water in the first place? I'm so lost right now. Thanks for the help!!! -
## Chemistry

A sample of 8.44 grams of NaOH is dissolved into 536 mL of aqueous 0.250 M NaOH (assume no volume change). This solution is then poured into 1.96 gallons of water. You may assume that the two volumes can be added.) What is the concentration of NaOH in the -
## calculus

A water-trough is 10m long and has a cross-section which is the shape of an isosceles trapezoid that is 30cm wide at the bottom, 80cm wide at the top, and has height 50cm. If the trough is being fi lled with water at the rate of 0.2 m3/min, how fast is the -
## thermodynamics

an automobile tire contains a certain volume of air at 30 psig and 70 degree fahrenheit. The barometric pressure is 29.50 in.Hg. If due to running conditions the temperature of the air in the tire rises to 160 fahrenheit, what will be the gage pressure? -
## Chem

A volume of equimolar strong acid like HCl is mixed with an equal volume of equimolar strong base like NaOH in a beaker of water. What exists after the reaction? -
## chemistry

at 25˚c the density of water is 0.997g/cm³,the density of ice at -10˚c is 0.917g/cm³. if a soda can volume is 240 ml is filled then frozen at -10˚c, what volume does solid occupy? -
## Science

A stone with a mass of 225.0g is placed into a graduated cylinder with a starting volume of 200.0ml. If the water in the cylinder is displaced to 225.0 ml, calculate the volume of the rock and its density. -
## Please check my calculus

A conical tank has a height that is always 3 times its radius. If water is leaving the tank at the rate of 50 cubic feet per minute, how fast if the water level falling in feet per minute when the water is 3 feet high? Volume of a cone is V=1/3(pi)r^2h A. -
## Calculus

A conical tank has a height that is always 3 times its radius. If water is leaving the tank at the rate of 50 cubic feet per minute, how fast if the water level falling in feet per minute when the water is 3 feet high? Volume of a cone is V=1/3(pi)r^2h A. -
## physics

A heat engine takes in 840 kJ per cycle from a heat reservoir. which is not a possible value of the engine's heat output per cycle? -
## Chemistry

A graduated cylinder contains 56.3ml of water. A metal cylinder is dropped in the water and is completely covered by water. The diameter of the cylinder is 3.8 cm and the height of the cylinder in 5.4cm. What is the volume reading in the graduated cylinder -
## Calculus

I need help setting up the equation. The portion of the graph y = ex between x = 0 and x = ln 3 is rotated around the y axis to form a container. The container is filled with water. Use n = 4 subintervals and midpoints to approximate the work required to -
## Dalton's Law of Partial Pressures

A sample of propane gas, C3H8, was collected over water at 25 degree Celsius and 745 torr. The volume of the wet gas is 1.25 L. What will be the volume of the dry propane at standard pressure? -
## Chemistry

A sample of propane gas, C3H8, was collected over water at 25 degree Celsius and 745 torr. The volume of the wet gas is 1.25 L. What will be the volume of the dry propane at standard pressure? -
## Chemistry

I need help with this question, I don't know how to do it. If 210 mL of isopropyl alcohol is diluted with water to a total volume of 300 mL, what is the percent by volume of isopropyl alcohol in the solution? -
## Chemistry; Acid-Base Equilibrium

You are farming and loving life. You love the smell of ammonia and apply it to your field as a fertilizer. However, you have a pond which you use to water your crops and for your llamas drinking water. The ammonia you spread on your field washes into the -
## Chemistry; Acid-Base Equilibrium

You are farming and loving life. You love the smell of ammonia and apply it to your field as a fertilizer. However, you have a pond which you use to water your crops and for your llamas drinking water. The ammonia you spread on your field washes into the -
## Physics

1.The mass of a string is , and it is stretched so that the tension in it is 180 N. A transverse wave traveling on this string has a frequency of 260 Hz and a wavelength of 0.60 m. What is the length of the string? 2.A rocket engine emits of sound energy -
## chemistry

When 0.667 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 108C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. what is the molar heat of reaction, -
## statistics

According to the National Transportation Safety Board, 10% of all major automobile crashes result in serious injury to at least one person involved in the crash. The Georgia Department of Transportation reports that there are approximately 20 major -
## statistics

According to the National Transportation Safety Board, 10% of all major automobile crashes result in serious injury to at least one person involved in the crash. The Georgia Department of Transportation reports that there are approximately 20 major -
## physics

When the crampton coal-fired train engine was built in 1852 , its mass was 48.3t ( 1.0 t= 1.0*10^3) and its force capability was rated at 22.4 kN. Assuming it was pulling train cars whose total mass doubled its own was and the total friction on the engine -
## physics

When the crampton coal-fired train engine was built in 1852 , its mass was 48.3t ( 1.0 t= 1.0*10^3) and its force capability was rated at 22.4 kN. Assuming it was pulling train cars whose total mass doubled its own was and the total friction on the engine -
## science, density

The density of sea water is slightly higher than that of fresh water. The higher density is due to the fact that sea water contains salts such as sodium chloride and magnesium chloride. Suppose you have a container that holds 5.00 kg of fresh water, which -
## Chemistry

* From your hint, I arrived at an answer of 3.46 x 10^4 but the answer key says 3.11 x 10^5 Ib. A backyard swimming pool holds 185 cubic yards (yd^3) of water. What is the mass of the water in pounds? DrBob222: 185 yd^3 x (3 ft/yd) x (3 ft/yd) x *3 ft/yd) -
## math

how much heat would be required to warm Earths ocean by 1.0 degrees C assuming that the volume is 137*10^7 km ^3 and the density of sea water is 1.03 g/cm 3. also assume that the heat capacity of seawater is the same as that of water -
## chemistry

A sample of hydrogen gas was collected over water at 36°C and 855 mmHg. The volume of the container was 6.50 L. Calculate the number of moles of H2 collected. (Vapor pressure of water is 44.6 torr at 36°C) -
## Chemistry

An irregular shaped stone was lowered intro a graduated cylinder holding a volume of water equal to 2.0 ml. The height of the water rose to 7.0 ml. If the mass of the stone was 25 g, what was the density -
## Chemistry 101

A student using a 100mL graduated cylinder that contained 50.00mL of water. Th volume of the water increased to 57.50mL. The density of the object was 7.85 g/cm^2. How many grams did the metal object weigh? -
## Math

The area of cross section of a pipe is 5.4 centimetres square and the water pump out of it at the rate of 27 kilometre per hour find the volume of water which flows out of the pipe in 1 minute -
## math

A rectangular tank of 5 m long,4 m wide and 5 m high is filled with water to a depth 3 m. If a robot of volume 20 cubic metre is added to the tank, how much will the water level rise? -
## dr bob

how much heat would be required to warm Earths ocean by 1.0 degrees C assuming that the volume is 137*10^7 km ^3 and the density of sea water is 1.03 g/cm 3. also assume that the heat capacity of seawater is the same as that of water -
## Chemistry 101

A student using a 100mL graduated cylinder that contained 50.00mL of water. Th volume of the water increased to 57.50mL. The density of the object was 7.85 g/cm^2. How many grams did the metal object weigh? -
## MATH

A model train is a scale model created from actual measurements. The scale factor for HO or Half Zero model trains is 1:87. A typical engine is 50mm in height and 200mm in length. Determine the actual dimensions of the train engine. Help Please -
## MATH

A model train is a scale model created from actual measurements. The scale factor for HO or Half Zero model trains is 1:87. A typical engine is 50mm in height and 200mm in length. Determine the actual dimensions of the train engine. Help Please -
## science

An object measures 12 x 3 x 2.5 cm and has a density of 0.6 g/cm3. When it is placed in water, what is the volume of the part of the object that is above the surface of the water? -
## science

An object measures 12 x 3 x 2.5 cm and has a density of 0.6 g/cm3. When it is placed in water, what is the volume of the part of the object that is above the surface of the water? -
## science

An object measures 12 x 3 x 2.5 cm and has a density of 0.6 g/cm3. When it is placed in water, what is the volume of the part of the object that is above the surface of the water? -
## chemistry help!

A sample of methane gas, CH4 was collected over water at 25 degrees celcius and 720 torr. The volume of the wet gas is 2.50L. What will be the volume of the dry methane at a standard pressure? -
## chemistry

A chemist must dilute of M aqueous magnesium fluoride solution until the concentration falls to M . He'll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate this final volume, in liters -
## chem help

A sample of methane gas, CH4 was collected over water at 25 degrees celcius and 720 torr. The volume of the wet gas is 2.50L. What will be the volume of the dry methane at a standard pressure? -
## Physics

During take-off the angular velocity of the blades of a revving engine of engine of an air craft change from 350rev/min to 570rev/min in a time interval of 15minutes. Determine (1).uniform angular acceleration in rad/sec (2).angular displacement during the -
## Physics

A sports car with a very powerful engine driving on a surface with a coefficient of static friction µs = 0.8 and a ten degree incline wants to accelerate from a stop to 100 km/hr. (You may neglect air resistance.) a) What is the fastest that the car can -
## chemistry

An automobile tire contains air at a pressure of 200. kPa and 25°C. The tire and its air heat up during traveling. If the pressure increases to 250. kPa but the volume remains the same, what is the temperature of the air inside the tire? -
## chemistry

Purpose: The purpose of this experiment is to determine the Ksp for calcium hydroxide. Materials are: *50.0 mL of 0.10 M HCl(aq) *bromophenol blue indicator *50.0 mLsaturated calcium hydroxide *50.0 mL buret *125 mL Erlynmyer Flask *50.0 mL of distilled -
## physics

is the following statements true or false + write a correct version of each false sentance below: 1. usually, the cooler a liquid or gas is, the denser it is. 2. if you only want a small volume of hot water, you should place the immersion heater near the -
## Math ?

Pleas Help! I need to finish my project but I don't understand what there asking regarding a jacuzzi. I think measurements is needed for a cyclinder shape at the 3ft deep with people sitting, six people seating 2"wide, volume of water is 150 cubic ft -
## information literacy

4. Which of the following statements about human-power search engines is true? A. People code the search engine so that they'll populate lists of trending search terms and phrases. B. Links are selected by users. C. Users send in their search request and -
## chemistry

When 24.30mL of .5 M H2SO4 is added to 24.30 of 1M KOH in a coffee cup calorimeter at 23.5 degrees C, the temp rises to 30.17 degrees C. Calculate delta H of this reaction. (Assume that the total volume is the sum of the individual volumes and that density -
## Physical Science

The density of sea water is slightly higher than that of fresh water. The higher density is due to the fact that sea water contains salts such as sodium choride and magnesium chloride. Suppose you have a container that holds 5.00 kg of freshwater, which -
## physics

When a body hanging from a spring balance is immersed in water it floats just below the surface of water and shows 100g loss in its weight (I) what is the weight of the body in water? (Ii) what is the weight of the body in air? (Iii) what is the up thrust -
## Physics

for every 10 m you descend below the surface of water, the pressure on you will increase by an amount equal to atmospheric pressure 101kpa. an air bubble in a lake has a volume of 20 mm^3 at a depth of 40m. predict what volume it will have just before -
## Chemistry

Neutralization of water containing H2SO4 and HNO3 with CaSO3. What is the pH in water if the volume is 1000 liter and the concentration of H2SO4 is 0,0013 M and concentration of H2SO4 is 0,0010 M ? And how much of CaCO3 is needed for neutralization of the -
## physics 2

sorry here is actual question: A 285-kg stunt boat is driven on the surface of a lake at a constant speed of 13.5 m/s toward a ramp, which is angled at 28.5° above the horizontal. The coefficient of friction between the boat bottom and the ramp's surface -
## Calculus

Water reaches its maximum density above its freezing point. The volume V (in cubic diameters) of 1 kg of water at temperature T between 0 degrees C and 30 degrees C can be approximated by the formula V=999.87 - 0.06426T + 0.0085043T^2 - 0.0000679T^3. Find -
## Geometry

A swimming pool is a rectangular prism. Estimate the volume of water in the pool in gallons when it is completely full (Hint: 1 gallon = 0.134 ft^3 ((feet cubed)) ). The density of water is about 8.33 pounds per gallon. Estimate the weight of the water in -
## maths

a rectangular tank 30cm×20cm×12cm contains water to a depth of 6 cm.A metal cube of side 10 cm is placed in the tank with one face resting on the bottom of the tank.find the volume of the water in the litre must be poured in the tank so that the metal -
## Physics

You decide to repeat Archimedes experiment and determine the density of a candle holder. you suspend it from a spring scale and scale reads 8.0N. You then lower the holder into a tub of water until completely submerged and it reads 5.0N. what is the volume -
## English

Choose the best paraphrase of these lines from the "The Sidewalk Racer" A)I wish I could move as fast as a car or a plane, but I cant because I am only a human. B)I feel as if I am botha single engine plane and a car.(I pick this) C)With my one-engine -
## Bmcc

A rectangular air mattress is 200 cm long, 50 cm wide and 8 cm thick. If it has a mass of M=2 kg, what additional mass X can it support in water? Hint: Volume=L x W x H; Archimedes Forces B= (density of water) x V x g; M+X=B -
## THIS IS FOR MATH AND SCIENCE TUTORS

HAPPY PI DAY! A mathematician, a physicist, and an engineer are all given identicalrubber balls and told to find the volume. They are given anything theywant to measure it, and have all the time they need. The mathematician pulls out a measuring tape and -
## Chemistry

A 26.5 g sample of ethylene glycol, a car radiator coolant, loses 675 J of heat. What was the initial temperature of ethylene glycol if the final temperature is 32.5°C (c of ethylene glycol = 2.42 J/gK)? Please help me, I don't even know where to begin!! -
## Social Sciences

I have to present a bill of why prostitution should be legalized in the U.S. in school and was wondering if anyone has some fun or interesting ideas to really get the class interested in my topic. I really don't want to blend in with the same old -
## Math

How do I figure the ratio of one part liquid to eighteen parts water if I am using four gallons of water? Isn't the water liquid also? So all eighteen parts are liquid. 17 parts water= 17/18*4gal= 17/18*16quarts= ... 1 part solute= 1/18*16 quarts= 3.5 cups -
## Help in Chemistry!!

You are given an aqueous solution of hydrofluoric acid. (Recall that hydrofluoric acid is a weak acid; When you are given an aqueous solution of a weak acid you always assume that the dissociation reaction of the acid in water has reached equilibrium) -
## Physics

There is a small amount of water at the bottom of a sealed containerof volume 4.3 liters which is otherwise full of an ideal gas. A thin tube open to the atmosphere extends down into the water, and up to a height of 238 cm. The system is initially a -
## physics

There is a small amount of water at the bottom of a sealed containerof volume 4.3 liters which is otherwise full of an ideal gas. A thin tube open to the atmosphere extends down into the water, and up to a height of 238 cm. The system is initially a -
## physicssss

Six grams of water changes from liquid to vapor at a pressure of one atmosphere. In the process, the volume changes from 1.3 cm3 to 2393 cm3. The latent heat of vaporization of water is 2.26 × 106 J/kg. Find the work done. Answer in units of J Find the -
## physics

A light–rail commuter train draws 645 A of 590–V DC electricity when accelerating. What is its power consumption rate in kilowatts? How long does it take to reach 30.0 m/s starting from rest if its loaded mass is 4.50×104 kg, assuming 91.0% efficiency -
## chemistry (heat of fusion/vaporization)

i need help setting this problem up. You have an insulated container of water that has a temperature of 83.2 C, you continue to add ice until the temperature reaches .6 C and you remove the excess ice, your volume increased by 79.8 mL. What amount of hot -
## Chemistry

If 210 mL of isopropyl alcohol is diluted with water to a total volume of 300 mL, what is the percent by volume of isopropyl alcohol in the solution? Would it be 70%?? -
## Chemistry

Alicia's cheapskate boyfriend gave her a ring he claims is 24 carat gold. Alicia is skeptical. After chem class the next day she measures the mass of the ring, finds the volume of the ring by water displacement, and then calculates the density of the ring. -
## physic

A diesel engine works at a high compression ratio to compress air until it reaches a temperature high enough to ignite the diesel fuel. Suppose the compression ratio (ratio of volumes) of a specific diesel engine is 24 to 1. If air enters a cylinder at 1 -
## physics

A diesel engine works at a high compression ratio to compress air until it reaches a temperature high enough to ignite the diesel fuel. Suppose the compression ratio (ratio of volumes) of a specific diesel engine is 19 to 1. If air enters a cylinder at 1 -
## physics

A diesel engine works at a high compression ratio to compress air until it reaches a temperature high enough to ignite the diesel fuel. Suppose the compression ratio (ratio of volumes) of a specific diesel engine is 19 to 1. If air enters a cylinder at 1 -
## physics

A diesel engine works at a high compression ratio to compress air until it reaches a temperature high enough to ignite the diesel fuel. Suppose the compression ratio (ratio of volumes) of a specific diesel engine is 19 to 1. If air enters a cylinder at 1 -
## Chemistry

A student collected H2 gas in a buret by displacing water at 22.0 °C. The buret could not be submerged deep enough in a water bath to equalize the pressure. The water level in the buret was 18.2 cm above the water level in the water bath. The volume of -
## Chemistry

A student collected H2 gas in a buret by displacing water at 22.0 °C. The buret could not be submerged deep enough in a water bath to equalize the pressure. The water level in the buret was 18.2 cm above the water level in the water bath. The volume of -
## chem

Consider a Carnot engine operating between the temperatures of 300. K and 189 K. Find the efficiency of this engine. Assume, now, that the isothermal step at 300. K is not reversible and the expansion takes place against a constant external pressure of -
## physics

For a safe re-entry into the Earth's atmosphere the pilots of a space capsule must reduce their speed from 2.6 104 m/s to 1.0 104 m/s. The rocket engine produces a backward force on the capsule of 1.7 105 N. The mass of the capsule is 3800 kg. For how long -
## Chemistry

O.k. I am confused. So here is what I did. Mass of empty flask plus stopper: 37.34g mass of stoppered flask plus water: 63.67g Mass of stoppered flask plus liquid: 52.01g Mass of water: 63.67 - 37.34= 26.33 Volume of Flask(density of H20 at 25*C, 0.9970 -
## SCIENCE ASAP please

1. Density is the relationship between ____. (1 point) mass and volume cubic centimeters and pounds weight and volume grams and mass 2. Which of the following is NOT a possible sign of a chemical change? (1 point) a change in state a change in color the -
## Chemistry

1. Find each mass & which has the greater mass. 1.0 ml mercury or 1.0 ml of water 2. Find each volume & which has greater volume. 100.g gold or 100. g water -
## Chemistry 2

A student prepares phosphorous acid by reacting solid phosphorous triodide with water PI3+H2O-->H3PO3+HI The student needs to obtain 0.250L of phosphorous acid. (d=1.651g/mL). The procedure calls for a 45.0% excess of water and a yield of 75.0%. How much -
## Physical science

Hello! 1.How can the density of a hollow lead ball filled with water be increased? a.Increase the size of the ball and add more water.* b.Remove the water and replace it with air. c.Remove the water and melt the ball into a solid sphere. d.Remove the water -
## Physics

A Jaguar XK8 convertible has an eight-cylinder engine. At the beginning of its compression stroke, one of the cylinders contains 499 cm ^ 3 of air at atmospheric pressure (1.01\times 10^5 Pa}) and a temperature of 27.0 degrees C. At the end of the stroke, -
## math

gasoline and water are immiscible. Regular-grade gasoline has a lower density than water. A 100mL graduated cylinder with an inside diameter of 3.2 cm contains 34 g of gasoline and 34 g of water. What is the combined height of the two liquid layers in the -
## Chemistry

One of the main components of hard water is CaCO3. When hard water evaporates, some of the CaCO3 is left behind as a white mineral deposit. If hard water solution is saturated with calcium carbonate, what volume of the solution has to evaporate to deposite -
## science

Is 40ml of oil denser than 25ml of vinegar? and are most chemical changes easy or difficult to undo? Density equals weight Divided by volume, so the amount of ml (volume) makes no difference. Vinegar is denser than oil. That's why when you put the 2 -
## HELP ...BODY VOLUME

Explain how you would measure the volume of your own body. Measure the increase in the water level when the person is totally submeregd in a tank of water. Multiply the water level increase bu the cross sectional area of the tank. -
## chemistry

What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what -
## Chemistry

Calculate the work done in joules when 1.0 mole of water vaporizes at 1.0 atm and 100C. Assume that the volume of liquid water is negligible compared with that of steam at 100c, and ideal gas behavior -
## Chemistry

The theoritical yeild of a reaction that gives off nitrogen trifluoride gas is 844 mL at STP. What total volume of NF3 plus water vapor will be collected over water at 25° C and a total pressure of 1.017 atm? -
## Physics

A typical model rocket engine exerts an average force of 5 N on its exhaust gas. How much average thrust force does the gas exert on the engine and rocket? -
## chemistry

Let me repost the important information only: Purpose: The purpose of this experiment is to determine the Ksp for calcium hydroxide. Materials are: *50.0 mL of 0.10 M HCl(aq) *bromophenol blue indicator *50.0 mLsaturated calcium hydroxide *50.0 mL buret