# A 5.1–kg block is pulled along a frictionless floor by a cord that exerts a force P = 12 N at an angle θ = 25° above the horizontal, as shown below. (a) What is the acceleration of the block?

31,049 results
1. ## physics

Two blocks are pushed along a horizontal frictionless surface by a force of 20 newtons to the right. The force acts on the 3 kg block, which in turn pushes the 2kg block sitting next to it. The force that the 2-kilogram block exerts on the 3-kilogram block

2. ## physics

A chair of weight 150 lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of = 38.0 directed at an angle of 41.0 below the horizontal and the chair slides along the floor.Using Newton's laws, calculate , the

3. ## Physics

A small block on a frictionless horizontal surface has a mass of 2.50×10−2 Kg. It is attached to a massless cord passing through a hole in the surface. The block is originally revolving at a distance of 0.300 m from the hole with an angular speed of

4. ## physics

A block of mass m1=3.70kg on a frictionless plane inclined at angle 30 deg is connected by a cord over a massless, frictionless pulley to a second block mass m2= 2.30kg. What is... a) The magnitude of the acceleration of each block? b) The direction of the

5. ## science

A chair of mass 15.5 is sitting on the horizontal floor; the floor is not frictionless. You push on the chair with a force = 38.0 that is directed at an angle of 42.0 below the horizontal and the chair slides along the floor.Use Newton's laws to calculate

6. ## Physics

A block of mass 5.53 kg lies on a frictionless horizontal surface. The block is connected by a cord passing a. over a pulley to another block of mass 2.25 kg which hangs in the air. Assume the cord to be light (massless and weightless) and unstretchable

7. ## physics

Figure shows a block (mass ) on a smooth horizontal surface, connected by a thin cord that passes over a pulley to a second block which hangs vertically. (a) Draw a free-body diagram for each block, showing the force of gravity on each, the force (tension)

8. ## Physics

A small block on a frictionless horizontal surface has a mass of 2.50×10−2 Kg. It is attached to a massless cord passing through a hole in the surface. The block is originally revolving at a distance of 0.300 m from the hole with an angular speed of

9. ## Physics

Two blocks are connected by a lightweight, flexible cord that passes over a frictionless pulley. If m1 is 3.4 kg and m2 is 9.1 kg, and block 2 is initially at rest 130 cm above the floor, how long does it take block 2 to reach the floor?

10. ## Physics

A concrete block of mass 35kg is pulled along a horizontal floor with the aid of a rope inclined at an angle of 30 degrees to the horizontal. If the coefficient of the friction is 0.75. Calculate the force required to move the block over the floor

11. ## Physics

A small block with a mass of m = 0.120 kg is attached to a cord passing through a hole in a frictionless, horizontal surface. The block is originally revolving at a distance of 0.40 m from the hole with a speed of 0.70 m/s. The cord is pulled from below,

12. ## physics

A block of mass M hangs from a rubber cord. The block is supported so that the cord is not stretched. The unstretched length of the cord is L0 and its mass is m, much less than M. The "spring constant" for the cord is k. The block is released and stops at

13. ## Forces w/ tension

Assume that three blocks portrayed below move on a frictionless surface and that a 42 N force acts on the 3.0 kg block. Determine (a) the acecleration given the system, (b) the tension inthe cord connecting the 3.0kg and the 1.0 kg blocks, and (c) the

14. ## Physics

A chair of weight 85.0 N lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of F = 44.0 N directed at an angle of 42.0 degrees below the horizontal and the chair slides along the floor. Using Newton's laws,

15. ## mechanics and fluids

a block of mass 6 kg resting on a horizontal surface is connected by a cord passing over a light, frictionless pulley to a hanging block of mass 4 kg. the coefficient of kinetic friction between the block and the horizontal surface is 0.5. after the block

16. ## Physics

Three blocks on a frictionless horizontal surface are in contact with each other, as shown below. A force F is applied to block A (mass mA). (a) Draw a free-body diagram for each block. Determine (b) the acceleration of the system (in terms of mA, mB, mC),

17. ## Physics

In Figure 5-66, a force F of magnitude 13 N is applied to a FedEx box of mass m2 = 1.0 kg. The force is directed up a plane tilted by θ = 37°. The box is connected by a cord to a UPS box of mass 3.0 kg on the floor. The floor, plane, and pulley are

18. ## physics

A 4.5 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=13.50 N at an angle theta=30.0 degrees above the horizontal. What is the speed of the block 5.50 seconds after it starts moving?

19. ## Physics

A ladder of length L = 2.1 m and mass m = 18 kg rests on a floor with coefficient of static friction μs = 0.57. Assume the wall is frictionless. a. What is the normal force the floor exerts on the ladder? b. What is the minimum angle the ladder must make

20. ## physics

A 3.90 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=14.1N at an angle theta=32.5degrees above the horizontal, as shown. a.) What is the magnitude of the acceleration of the block when the force is applied?

21. ## physics

A chair of weight 100N lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of F = 43.0N directed at an angle of 35.0^\circ below the horizontal and the chair slides along the floor. Using Newton's laws, calculate

22. ## Physics

A 5.1–kg block is pulled along a frictionless floor by a cord that exerts a force P = 12 N at an angle θ = 25° above the horizontal, as shown below. (a) What is the acceleration of the block? (b) The force P is slowly increased. What is the value of P

23. ## physics

5. A 2.00-kg block hangs from a rubber cord, being supported so that the cord is not stretched. The unstretched length of the cord is 0.500 m, and its mass is 5.00 g. The “spring constant” for the cord is 100 N/m. The block is released and stops

24. ## Physics

9. Two blocks connected by a cord passing over a small frictionless pulley rest on frictionless planes as shown in the figure below. (a) Which way will the system move? (b) What is the acceleration of the block? (c) What is the tension in the cord?

25. ## Physics

A block of mass 7.5 kg is pulled along a horizontal frictionless floor by a cord that exerts a force of 31.0 N at an angle 26.3° above the horizontal. What is the magnitude of the acceleration of the block? I have nooo clue what to do for this one. Can

26. ## Physics

A 2.10 kg frictionless block is attached to an ideal spring with force constant 315N/m . Initially the block has velocity -3.75m/s and displacement 0.270m . Find (a) the amplitude of the motion. (b) the maximum acceleration of the block. (c) the maximum

27. ## Physics

A chair of weight 75.0N lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of F = 45.0N directed at an angle of 40.0¡ã below the horizontal and the chair slides along the floor. Using Newton's laws, calculate

28. ## Physics

I got two questions Three blocks on a fricitonless horizontal surface are in contact with each other a force F is applied to block 1 mass m1 Draw a free body diagram for each block ok done the accelration of the system (in terms of m1, m2, and m3) ok done

29. ## Physics

A stationary arrangement of two crayon boxes and three cords. Box A has a mass of 11.0kg and is on a ramp at angle è=30.0 degrees; box B has a mass of 7.00 kg and hangs on a cord. The cord connected to Box A is parallel to the ramp which is frictionless

30. ## Physics

A 10-KG block is pulled along a rough horizontal floor by a 12-N force acting at a 30 degrees angle with respect to the horizontal. The block accelerates at 0.1 m/s2. Calculate A....... the weight of the block B...... the force of friction acting on the

31. ## Physics

Block A of mass 2.0 kg and Block B of 8.0 kg are connected by a spring of spring constant 80 N/m and negligible mass. The system is being pulled to the right across a horizontal frictionless surface by a horizontal force of 4.0 N, with both blocks

32. ## Physics

A chair of weight 85.0N lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of F = 45.0N directed at an angle of 34.0∘ below the horizontal and the chair slides along the floor. Using Newton's laws, calculate

33. ## Physics

A small block on a frictionless horizontal surface has a mass of 0.0215 kg. It is attached to a massless cord passing through a hole in the surface. (See the figure below (Figure 1).) The block is originally revolving at a distance of 0.280 m from the hole

34. ## physics

A 3.26 kg block located on a horizontal floor is pulled by a cord that exerts a force F = 10.4 N at an angle theta = 29.0° above the horizontal. The coefficient of kinetic friction between the block and the floor is 0.10. What is the speed of the block

35. ## physics

A 20.0 kg block is connected to a 30.0 kg block by a string that passes over a light, frictionless pulley. The 30.0 kg block is connected to a spring that has negligible mass and a force constant of 300 N/m, as shown in the figure below. The spring is

36. ## Physics

A block rests on a horizontal, frictionless surface. A string is attached to the block, and is pulled with a force of 45.0 N at an angle è above the horizontal, as shown in Figure 7-23. After the block is pulled through a distance of 1.50 m its speed is v

37. ## physics

a block of mass 2 kg and block B of mass 8 kg are connected by a spring of spring constant 80 N/m and negligible mass. The system is being pulled to the right across a horizontal frictionless surface by a horizontal force 4 N with both blocks experiencing

38. ## Physic

A 55-kg female bungee jumper fastens one end of the cord (made of elastic material) to her ankle and the other end to a bridge. Then she jumps off the bridge. As the cord is stretching, it exerts an elastic force directed up on her. Calculate her

39. ## physics

A block of mass 3kg which is on a smooth inclined plane making an angle of 30° to the horizontal is connected by a cord passing over a light frictionless pulley to a second block of mass 2kg hanging vertically. What is the acceleration of each block and

40. ## Physics

A block of mass 30 m can’t move without friction on a horizontal table. Block is attached to another block of mass by 8 m by a cord that passes over a frictionless pulley as shown. If the masses of the cord and the pulley our neglect a bowl what is the

41. ## physic

16. A 4.8-kg block attached to a spring executes simple harmonic motion on a frictionless horizontal surface. At time t = 0 s, the block has a displacement of -0.50 m, a velocity of -0.80 m/s, and an acceleration of +8.3 m/s2. The force constant of the

42. ## physics

A 3.24 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=11.8N at an angle theta=23.0degrees above the horizontal, as shown. What is the magnitude of the acceleration of the block when the force is applied?

43. ## Phy

In the figure, a block of mass m = 3.09 kg is pulled along a horizontal frictionless floor by a cord that exerts a force of magnitude F = 13.7 N at an angle θ = 23.0°. (a) What is the magnitude of the block's acceleration? (b) The force magnitude F is

44. ## Physics

A 4.58 kg block located on a horizontal floor is pulled by a cord that exerts a force F = 10.5 N at an angle theta = 25.5° above the horizontal. The coefficient of kinetic friction between the block and the floor is 0.09. What distance does the block

45. ## Physics

A 5.70 kg block located on a horizontal floor is pulled by a cord that exerts a force F = 10.4 N at an angle theta = 27.5° above the horizontal. The coefficient of kinetic friction between the block and the floor is 0.10. What is the speed of the block

46. ## physics

A 5 kg block is pulled along a horizontal frictionless floor by a string and exerts force of magnitude 16 N at an angle 30 degree.What is the magnitude of the acc of block?

47. ## Physics

A 20.0 kg block is connected to a 30.0 kg block by a string that passes over a light, frictionless pulley. The 30.0 kg block is connected to a spring that has negligible mass and a force constant of 200 N/m. The spring is unstretched when the 30.0 kg block

48. ## Physics

A 20.0 kg block is connected to a 30.0 kg block by a string that passes over a light, frictionless pulley. The 30.0 kg block is connected to a spring that has negligible mass and a force constant of 260 N/m, as shown in the figure below. The spring is

49. ## physics

Two blocks are connected by a lightweight, flexible cord that passes over a frictionless pulley. If m1 = 3.8 kg and m2 = 9.2 kg, and block 2 is initially at rest 140 cm above the floor, how long does it take block 2 to reach the floor?

50. ## Physics

A 4 kg block resting on a horizontal surface is attached to an 8 kg block that hangs freely by a cord passing over a frictionless pulley. The coefficient of kinetic friction between the block and the horizontal surface is 0.4. Find the acceleration of the

51. ## Physics

A block rests on a horizontal, frictionless surface. A string is attached to the block, and is pulled with a force of 45.0 N at an angle è above the horizontal, as shown in Figure 7-23. After the block is pulled through a distance of 1.50 m its speed is v

52. ## Repost-Physics 1

A horizontal force of 30 N pulls a block of mass 2.5 kg across a level floor. The coefficient of kinetic friction between the block and the floor is ìK = 0.25. If the block begins with a speed of 2.0 m/s and is pulled for a distance of 18 m, what is the

53. ## Physics

A)A block rests on a horizontal frictionless surface. A string is attached to the block, and is pulled with a force of 60.0 N at an angle θ above the horizontal. After the block is pulled through a distance of 2.00 m, its speed is 2.70 m/s, and 43.0 J of

54. ## Physics

Ok I got a question I asked before except there are other parts that I didn't ask so here we go Three blocks on a frictionless horizontal surface are in contact with each other A force F is applied to block 1 (mass m1). Draw a free-body diagram for each

55. ## physics

Two blocks are connected by a lightweight, flexible cord that passes over a frictionless pulley. If mass one equals 3.6 Kg and mass two equals 9.2 Kg, and block two is initially at rest 140 cm above the floor, how Long does it take block two to reach the

56. ## Physics - Newtons laws

A block (mass m1 = 8kg) is moving on an inclined plane, coefficient of kinetic friction of 0.45, whose angle is 30degrees. This block is connected to a second block (mass m2 = 22kg) by a cord that passes over a small frictionless pulley. Find the

57. ## physics

A chair of weight 150 lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of = 38.0 directed at an angle of 41.0 below the horizontal and the chair slides along the floor.Using Newton's laws, calculate , the

58. ## physics

A chair of weight 100N lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of F = 43.0N directed at an angle of 35.0^\circ below the horizontal and the chair slides along the floor. Using Newton's laws, calculate

59. ## physics

A block of mass 3.62 kg lies on a frictionless horizontal surface. The block is connected by a cord passing over a pulley to another block of mass 7.8 kg which hangs in the air, as shown. Assume the cord to be light (massless and weightless) and

60. ## Physics

A 7 kg block is pulled 8 m along a frictionless horizontal plane by a 23 N force that acts at 39 degrees above the horizontal. What is the work done by the force on the block? I don't get how to start the problem, I feel like there is something missing.

61. ## physics

A 3.24 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=11.8N at an angle theta=23.0degrees above the horizontal, as shown. What is the magnitude of the acceleration of the block when the force is applied? b.)

62. ## Physics

A 4.96 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=13.7N at an angle theta=16.0degrees above the horizontal. What is the magnitude of the acceleration of the block when the force is applied? I know a=F/m

63. ## physics

A 6.00 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=14.1 N at an angle θ= 19.0° above the horizontal, as shown. What is the speed of the block 3.50 seconds after it starts moving?

64. ## physics

A 6.00 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=14.1 N at an angle θ= 19.0° above the horizontal, as shown. What is the speed of the block 3.50 seconds after it starts moving?

65. ## physics

I am trying to study for my exam i have tomorrow and this type of problem keeps giving me trouble can someone please help me:: A 3.24 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=11.8N at an angle

66. ## physics

A 3.26 kg block located on a horizontal floor is pulled by a cord that exerts a force F = 10.4 N at an angle theta = 29.0° above the horizontal. The coefficient of kinetic friction between the block and the floor is 0.10. What is the speed of the block

67. ## physics

3.92 kg block located on a horizontal floor is pulled by a cord that exerts a force F = 11.5 N at an angle theta = 15.5o above the horizontal, as shown in the Figure. The coefficient of kinetic friction between the block and the floor is 0.09. What is the

68. ## physics

A 5.56 kg block located on a horizontal floor is pulled by a cord that exerts a force F = 10.7 N at an angle theta = 17.0° above the horizontal, as shown in the Figure. The coefficient of kinetic friction between the block and the floor is 0.06. What is

69. ## Physics

Problem:: A 4.80 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=13.5 N at an angle q= 17.5° above the horizontal. What is the speed of the block 3.90 seconds after it starts moving? What I've got:: Using sin

70. ## Physics

A block of mass 8.60 kg is pulled along a horizontal frictionless surface by a cord that exerts a force of 33 N at an angle 29.40 degrees from the horizontal. What is the magnitude of the normal force exerted on the mass by the floor? I solved for the

71. ## Physics

The figure shows a 7 kg block being pulled along a frictionless floor by a cord that applies a force of constant magnitude 20 N but with an angle θ(t) that varies with time. When angle θ = 29°, at what rate is the block's acceleration changing if

72. ## ph

A 20.0 kg block is connected to a 30.0 kg block by a string that passes over a light, frictionless pulley. The 30.0 kg block is connected to a spring that has negligible mass and a force constant of 300 N/m, as shown in the figure below. The spring is

73. ## Physics

Blocks of mass 15, 45, and 135 kg are lined up from left to right in that order on a frictionless surface so each block is touching the next one. A rightward-pointing force of magnitude 28 N is applied to the left-most block. 1.)What is the magnitude of

74. ## physics

A 15 kg block is pulled 5 m across the frictionless floor with a force of 62 N at a 41 degree angle. Calculate the total work done on the block.

75. ## physics

A small block on a frictionless horizontal surface has a mass of 2.50×10−2 . It is attached to a massless cord passing through a hole in the surface. (See the figure below .) The block is originally revolving at a distance of 0.300 from the hole with an

76. ## physics, only smart people answer

Two blocks are connected by a lightweight, flexible cord that passes over a frictionless pulley. If m1 = 3.4 kg and m2 = 9.0 kg, and block 2 is initially at rest 140 cm above the floor, how long does it take block 2 to reach the floor?

77. ## physics

Two blocks are connected by a lightweight, flexible cord that passes over a frictionless pulley. If m1 = 3.8 kg and m2 = 9.2 kg, and block 2 is initially at rest 140 cm above the floor, how long does it take block 2 to reach the floor?

78. ## Physics

Blocks of mass 4, 8, and 24 kg are lined up from left to right in that order on a frictionless surface so each block is touching the next one. A rightward-pointing force of magnitude 15 N is applied to the left-most block. a.)What is the magnitude of the

79. ## Physics 1

A horizontal force of 30 N pulls a block of mass 2.5 kg across a level floor. The coefficient of kinetic friction between the block and the floor is μK = 0.25. If the block begins with a speed of 2.0 m/s and is pulled for a distance of 18 m, what is the

80. ## physics

A block rests on a horizontal frictionless surface. A string is attached to the block, and is pulled with a force of 60.0 N at an angle θ above the horizontal. After the block is pulled through a distance of 2.00 m, its speed is 2.70 m/s, and 43.0 J of

81. ## physics

A block of mass m1 = 3.56 kg on a frictionless plane inclined at angle θ = 34.1° is connected by a cord over a massless, frictionless pulley to a second block of mass m2 = 2.72 kg hanging vertically (see the figure). (a) What is the acceleration of the

82. ## Physics

A block of mass m1 = 6.25 kg on a frictionless plane inclined at angle θ = 30.7° is connected by a cord over a massless, frictionless pulley to a second block of mass m2 = 2.36 kg hanging vertically (Fig. 5-52). (a) What is the acceleration of the

83. ## physics

A 10-KG block is pulled along a rough horizontal floor by a 12-N force acting at a 30 degrees angle with respect to the horizontal. The block accelerates at 0.1 m/s2. Calculate A....... the weight of the block B...... the force of friction acting on the

84. ## physics

A 10-KG block is pulled along a rough horizontal floor by a 12-N force acting at a 30 degrees angle with respect to the horizontal. The block accelerates at 0.1 m/s2. Calculate A....... the weight of the block B...... the force of friction acting on the

85. ## Physics

Two steel blocks are at rest on a frictionless horizontal surface. Block X has a mas of 3.0 kg ans is attacthed by means of a light taut string to block Y that has a mass of 12 kg. A force of 45 N (E) is applied to block x. Calculate the force block Y

86. ## PHYSICS

A block with a mass of 126 kg is pulled with a horizontal force of F applied across a rough floor. The coefficent of friction between the floor and the block is 0.7. If the block is moving at a constant velocity, what is the magnitude of F applied? F

A 2.10 kg frictionless block is attached to an ideal spring with force constant 315N/m . Initially the block has velocity -3.75m/s and displacement 0.270m . Find (a) the amplitude of the motion. (b) the maximum acceleration of the block. (c) the maximum

88. ## physics

An unknown force pushes a 17 kilogram block across a smooth frictionless floor. Three seconds after the force is first applied to the block , the block is moving with a speed of 6 meters per second. What is the magnitude of the the unknown force in

89. ## physics

An unknown force pushes a 17 kilogram block across a smooth (frictionless) floor. Three seconds after the force is first applied to the block, the block is moving with a speed of 6 meters per second. What is the magnitude of the unknown force?

90. ## physics

An unknown force pushes a 17 kilogram block across a smooth (frictionless) floor. Three seconds after the force is first applied to the block, the block is moving with a speed of 6 meters per second. What is the magnitude of the unknown force?

91. ## Physics

A 25.2 kg block of wood is pulled across a floor at a constant 9.74 m/s with a constant 62.7 N force. The bottom of the box has a surface area of 65.1 cm2. If the block was put on its side (which has twice the surface area of the bottom) and pulled with

92. ## physics

A chair of weight 150 lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of = 38.0 directed at an angle of 41.0 below the horizontal and the chair slides along the floor.Using Newton's laws, calculate , the

93. ## physics

A chair of weight 150 lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of = 38.0 directed at an angle of 41.0 below the horizontal and the chair slides along the floor.Using Newton's laws, calculate , the

94. ## physics

A chair of weight 150 lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of = 36.0 directed at an angle of 40.0 below the horizontal and the chair slides along the floor.Using Newton's laws, calculate , the

95. ## physics

A chair of weight 150 lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of = 36.0 directed at an angle of 40.0 below the horizontal and the chair slides along the floor.Using Newton's laws, calculate , the

96. ## khalsa model senior secondary school

A block of mass 3kg which is on a smooth inclined plane making an angle of 30° to the horizontal is connected by a cord passing over a light frictionless pulley to a second block of mass 2kg hanging vertically. What is the acceleration of each block and

97. ## physics

Two block are connected by a lightweight, flexible cord that passes over friction less pulley. If m1=3.6 kg amd m2= 9.2kg, and block 2 is initially at rest 140 cm. above the floor, how long does it take block 2 to reach the floor?

98. ## Physics

Two blocks sit on a horizontal surface. They are connected to each other by a massless cord. The block on the left has a mass of 4.8 kg and the block on the right has a mass of 2.2 kg. Another massless cord is attached to the block on the right and pulls

99. ## math

Two blocks sit on a horizontal surface. They are connected to each other by a massless cord. The block on the left has a mass of 5.1 kg and the block on the right has a mass of 3.0 kg. Another massless cord is attached to the block on the right and pulls

100. ## Phyics

If a 68kg object is being pulled across the hard floor with a horizontal force of 400N... a. What would the acceleration of the object be if it was on a frictionless floor? b. if there were friction, what would the force of friction be if it was pulled at