A 25.0 g aluminum block is warmed to 65.2 C and plunged into an insulated beaker containing 55.3g of water initially at 22.0C. the aluminum and water are allowed to come to thermal equilibrium. Assuming that no heat is lost,

8,184 results

  1. Physics

    A 10-kg piece of aluminum (which has a specific heat of 900 J/kg×°C) is warmed so that its temperature increases by 5.0 C°. How much heat was transferred into it?

  2. Science

    In the simulation shown below, each insulated beaker contains equal amounts of the same fluid.The starting temperature of beaker A was 100.0 °C and the starting temperature of beaker B was 0.0 °C. Assuming no heat is lost, what is the best estimate of

  3. Chemistry

    Sulfuric acid dissolves aluminum metal according to the following reaction: 2Al(s)+3H2SO4(aq)→Al2(SO4)3(aq)+3H2(g) Suppose you wanted to dissolve an aluminum block with a mass of 14.5g . 1.) What minimum mass of H2SO4 would you need? 2.)What mass of H2

  5. Chemistry Help!!

    a kilogram of aluminum metal and a kilogram of water are each warmed to 75 degree Celsius and placed in two identical insulated containers. one hour later, the two containers are opened and the temperature of each substance is measured. the aluminum has

  6. Physics

    A beaker of mass 1.2 kg containing 2.1 kg of water rests on a scale. A 2.2 kg block of aluminum (of density 2700 kg/m3) suspended from a spring scale is submerged in the water. Find the reading of the upper scale (the spring scale). The acceleration of

  7. Physics

    Work of 730 J is done by stirring an insulated beaker containing 80 g of water. What is the change in the temperature of the water? Please show calculation

  8. Physics

    A 3.00-liter aluminum cylinder at 5.00°C is filled to the brim with gasoline at the same temperature. If the aluminum and gasoline are warmed to 52.0°C, how much gasoline spills out? [Hint: Be sure to account for the expansion of the container. Also,

  10. chem

    Sulfuric acid can dissolve aluminum metal according to the following reaction. 2Al(s)+3H2SO4(aq)→Al2(SO4)3(aq)+3H2(g) Suppose you wanted to dissolve an aluminum block with a mass of 26.8 g . 1.What minimum amount of H2SO4 in grams would you need? 2.How

  11. heat of vaporization

    Suppose that 1.00 g of rubbing alcohol (C3H8O) evaporates from a 54.0 g aluminum block. If the aluminum block is initially at 25 C, what is the final temperature of the block after the evaporation of the alcohol? Assume that the heat required for the

  12. science

    The two insulated beakers contain equal amounts of identical liquids. The temperature of Beaker A is 85°C. The temperature of Beaker B is 40°C. A metal rod connects the beakers. Five minutes later, the temperature of Beaker A is 75°C and the temperature

  13. bio

    why was it important to cover each beaker with a piece of aluminum foil?

  15. chemistry 105

    Sulfuric acid dissolves aluminum metal according to the following reaction: 2Al(s)+3H2SO4(aq)-->Al2(SO4)3(aq)+3H2(g) Suppose you wanted to dissolve an aluminum block with a mass of 14.7 g. What minimum mass of H2SO4(in g) would you need? What mass of H2

  16. Chemistry

    a 15.7 g aluminum block is warmed to 53.2 degrees celsius and plunged into an insulated beaker containing 32.5 g of water initially at 24.5 degrees celsius. the aluminum and the water are allowed to come to thermal equilibrium. assuming no heat is lost,

  17. Chemistry

    The specific heat of aluminum is 0.900*j/g*C How much heat is required to raise the temperature of a 30.0 g block of aluminum from to 25.0 oC to 75 oC?

  18. science

    The two insulated beakers contain equal amounts of identical liquids. The temperature of Beaker A is 80°C. The temperature of Beaker B is 50°C. A copper rod connects the beakers. The system is then left alone for several hours. What would you expect to

  20. Chemistry

    Aluminum is more reactive than iron, yet it is used today for a variety of applications in which iron would corrode (cans, rain gutters,etc). The reason for the corrosion durability of aluminum is 1. all aluminum products are treated with a plastic

  21. Chemistry

    Two beakers are placed in a sealed container surrounded with air. In one beaker is pure H2O (Beaker A) and the other beaker is a 10% Sugar solution (Beaker B). As the system approaches equilibrium what change occurs to the volume of water in beaker A? What

  22. science

    The two systems shown below are identical except for the rod connecting the two beakers. Initially the temperatures of the beakers are as follows: Beaker A = 88°C Beaker B = 42°C Beaker C = 88°C Beaker D = 42°C Four minutes later the temperatures are

  23. college physics

    A 215 g sample of a substance is heated to 330 degrees C and then plunged into a 105 g aluminum calorimeter cup containing 165 g of water and a 17 g glass thermometer at 12.5 degrees C. The final temp is 35.0 degrees C. What is the specific heat of the

  25. Chemistry Stoichiometry

    Sulfuric acid can dissolve aluminum metal according to the following reaction. Suppose you wanted to dissolve an aluminum block with a mass of 25.7 . How many grams of H2 gas would be produced by the complete reaction of the aluminum block?

  26. Physics

    Explain how redioactive decay has always warmed the Earth from the inside and how nuclear fusion has always warmed the Earth from the outside.

  27. CHEMISTRY

    Suppose that 1.01g of rubbing alcohol(C3H8O) evaporates from a 56.0g aluminum block. If the aluminum block is initially at 25'C, what is the final temperature of the block after the evaporation of the alcohol? Assume that the heat required for the

  28. science

    The two insulated beakers contain equal amounts of identical liquids. The temperature of Beaker A is 80°C. The temperature of Beaker B is 50°C. A copper rod connects the beakers. The system is then left alone for several hours. What would you expect to

  30. chemistry

    Sulfuric acid dissolves aluminum metal according to the following reaction: 2Al(s) + 3H2SO4(aq) -> Al2(SO4)3(aq) + 3H2(g) Suppose you wanted to dissolve an aluminum block with a mass of 15.9g . A)What minimum mass of H2SO4 (in g) would you need?

  31. Physics

    Two blocks of identical mass are placed in water. One is made of aluminum, the other of wood. The wood block is noted and therefore floating. Upon which is the buoyant force greater? 1) on the aluminum block, 2) on the wood block or 3) they both experience

  32. physics

    Search: A block of steel (7900 kg/m3) is suspended from a spring scale. The scale is in newtons.What is the scale reading if the block is in air?What is the scale reading after the block has been lowered into a beaker of oil (900 kg/m3) and is completely

  33. chemistry

    a block of aluminum is placed in 10.0g of water. the initial temperature of the water is 22.0 degrees celcious and its final temperature is 27.0 degrees celcious. what is the amount of heat released by the block of aluminum in calories if it had an initial

  35. Science

    Plz correct me if I'm wrong!! Which of the following is a chemical property of aluminum? A.) The melting point of aluminum is 660 degrees C B.) The boiling point of aluminum is 2519 C C.) Aluminum does not dissolve in water D.) Aluminum reacts with

  36. science

    The two insulated beakers contain equal amounts of identical liquids. The temperature of Beaker A is 80°C. The temperature of Beaker B is 50°C. A copper rod connects the beakers. The system is then left alone for several hours. What would you expect to

  37. Physics

    In a setup/situation involving buoyancy, let's say there are two blocks, where one is of styrofoam and the other is aluminum, both placed in a fluid (for example: honey). The aluminum block is placed on the styrofoam block. How can I calculate the buoyant

  38. PHYSICS _ please help

    A metal block of volume 1 * 10^3 cm^3 is suspended from a thread as shown in the diagram. It is lowered into a beaker of liquid of unknown density until it is completely immersed but does not touch the bottom of the beaker. The beaker rests on a balance.

  40. physics

    To illustrate the effect of ice on the aluminum cooling plate, consider the data shown in the drawing below. The length of the ice block is L1 = 0.00476 m and its temperature is T1 = -11.9 °C. The aluminum block is L2 = 0.00131 m long and has a

  41. chemistry

    A 45 g block of aluminum initially at 28.0° C absorbs 548 J of heat. What is the final temperature of the aluminum? The specific heat of aluminum is 0.902 J/g °C.

  42. Physics

    A m1 = 1.95-kg aluminum block and a m2 = 7.85-kg copper block are connected by a light string over a frictionless pulley. The two blocks are allowed to move on a fixed steel block wedge (of angle 𝜃 = 34.0°) as shown in the figure. (For aluminum on

  43. chemistry

    A 0.25 kg length of aluminum wire is warmed 10.0°C by an electric current. How much heat was generated by the current?

  45. chemistry

    You have four beakers labeled A, B, C, and D. In beaker A, you place 100 grams of silver nitrate and enough water to make 50 mL of solution. In beaker D, you place 100 grams of KCl and enough water to make 100 mL of solution. You also pour 100 mL of water

  46. chemistry

    Let's say for example I have 5g of copper in a beaker. Mass would be 5g + mass of beaker. If I add any given amount of water to the beaker containing the copper, that will change the mass of the beaker containing the copper. Am I correct so far? So then if

  47. Physical Science

    Two identical beakers are both half filled with a liquid. Beaker A contains water and Beaker B contains a liquid that is denser than water. Which of the following is FALSE? a. The pressure at the bottom of Beaker B is greater than that at the bottom of

  48. Math

    In a science experiment, Ms. Dixon's students find that there is 0.00385 times as liquid in Beaker A as in Beaker B after two days. There are 3.5 millimeters of liquid in Beaker B. How much Liquid is in Beaker A?

  50. Chemistry

    An insulated beaker contains 250g of water at 25 degrees celsius. Exactly 41.6g of a metal at 100 degrees celsius was dropped in the beaker. The final temperature of the water was 26.4 degrees celsius. Assuming that no heat is lost in any other way,

  51. Physics

    An aluminum cube that has an edge length of 7 cm. is placed in a beaker of water that is filled to the brim. As a result the water overflows. what volume of water overflows when the aluminum cube is submerged in the water?

  52. physics please helpp

    A 1.67-kg block of aluminum at 21.7°C is to be melted and reshaped. How much heat must flow into the block in order to melt it? use the following values: For copper: c_copper=0.386 kJ/kg.K T_fusion=1359 K L_fusion=205 kg/K

  53. chem

    A 25.0 g aluminum block is warmed to 65.2 C and plunged into an insulated beaker containing 55.3g of water initially at 22.0C. the aluminum and water are allowed to come to thermal equilibrium. Assuming that no heat is lost, what is the final temperature

  55. science

    Two insulated beakers contain different amounts of identical liquids. Beaker A contains twice as much liquid as Beaker B. The temperature of Beaker A is 80°C. The temperature of Beaker B is 40°C. An aluminum rod connects the beakers, and the system is

  56. Chemistry Help Please!

    A kilogram of aluminum metal and a kilogram of water are each warmed to 75 oC and placed in two identical insulated containers. One hour later, the two containers are opened and the temperature of each substance is measured. The aluminum has cooled to 35

  57. Physics

    A block of mass M=0.525kg is floating stationary in a beaker of water. A string connected to the bottom of the beaker holds the block in place. The tension in the string is 7.10 N. The bottom of the block is floating a distance h=1.66cm above the bottom of

  58. chemistry help

    a kilogram of aluminum metal and a kilogram of water are each warmed to 75 degree celisus and placed in two identical insulated containers. one hour later, the two containers are opened and the temperture of each substance is measured. the aluminum has

  60. chemistry

    a kilogram of aluminum metal and a kilogram of water are each warmed to 75 degree celisus and placed in two identical insulated containers. one hour later, the two containers are opened and the temperture of each substance is measured. the aluminum has

  61. chemistry help

    a kilogram of aluminum metal and a kilogram of water are each warmed to 75 degree celisus and placed in two identical insulated containers. one hour later, the two containers are opened and the temperture of each substance is measured. the aluminum has

  62. physics

    A 75-g piece of aluminum at 89 °C is dropped in 1.0 L of water at 1.3 101 °C, which is in an insulated beaker. Assuming that there is negligible heat loss to the surroundings, determine the equilibrium temperature of the system

  63. Chemistry

    A 10.0000 g block of aluminum is heated and placed in a stream of oxygen gas, resulting in the formation of aluminum oxide on the surface of the block. The block is cooled and weighed and found to have a mass of 11.6471 g. The block is then placed in a

  65. Chemistry

    A 10.0000 g block of aluminum is heated and placed in a stream of oxygen gas, resulting in the formation of aluminum oxide on the surface of the block. The block is cooled and weighed and found to have a mass of 11.6471 g. The block is then placed in a

  66. Physics

    A 515 cm3(cm cubed) block of aluminum (D = 2.7 g/cm3) is lowered carefully into a completely full beaker of water. What is the weight of the water, in newtons, that spills out of the beaker?

  67. Math

    A 515 cm3 block of aluminum (Density = 2.7 g/cm3) is lowered carefully into a completely full beaker of water. What is the weight of the water, in newtons, that spills out of the beaker?

  68. Chemistry

    Suppose that 1.00 g of rubbing alcohol (C3H8O) evaporates from a 57.0g aluminum block If the aluminum block is initially at 25 C, what is the final temperature of the block after the evaporation of the alcohol? Assume that the heat required for the

  70. Physics

    A 2 g bullet flying at 390 m/s hits a 2.7 kg aluminum block at room temperature and embeds itself in the aluminum. After everything has come to equilibrium, how much has the entropy of the aluminum block increased?

  71. Chemistry

    Thank you so much for the help on my other question!!! An alloy (solution of metals) is 80% by volume iron. The rest is aluminum. Aluminum has a density of 2.70 g/cm³, and iron's is 7.87 g/cm³. A block of alloy measures 2.0 ft. wide and 3.0 ft. long. If

  72. chemistry

    An aluminum pan of mass 100 grams and at a temperature of 375°C is plunged into a vat of water. a. If the pan and the water end up at 45°C, how much energy did the aluminum pan lose? b. Assuming no energy goes into the environment, how much energy must

  73. physics

    An aluminum block absorbs 1.0 x 104 J of energy from the Sun when its temperature increases by 5.0 °C. What is the mass of the block? the specific heat capacity of aluminum is 920

  75. Physics

    A block of aluminum that has dimensions 2.07 cm by 2.55 cm by 5.00 cm is suspended from a spring scale. The density of aluminum is 2702 kg/m^3. (a) What is the weight of the block? 0.699 N (b) What is the scale reading when the block is submerged in oil

  76. Chemistry 101

    Sulfuric acid dissolves aluminum metal according to the following reaction: 2Al(s)+3H2SO4(aq)→Al2(SO4)3(aq)+3H2(g) Suppose you wanted to dissolve an aluminum block with a mass of 14.9g .What minimum mass of H2SO4 would you need? What mass of H2 gas would

  77. math

    From the Periodic Table, 1 mole of aluminum weighs 27.0 g., Therefore; If 54.0 g of aluminum are placed into the beaker to react with copper(II) chloride, how many grams of the metal product will be produced?

  78. physics

    a 450 cm^3 of aluminum (D = 2.7 g/cm^3) is lowered carefully into a completely full beaker of water? what is the weight of the water, in newtons, that spills out of the beaker?

  80. chemistry

    An insulated beaker contains 250.0 grams of water at 25C. Exactly 41.6 g of a metal at 100.0C was dropped in the beaker. The final temperature of the water was 26.4C. Assuming that no heat is lost in any other way, calculate the specific heat of the metal.

  81. Chemistry

    Suppose you wanted to dissolve an aluminum block with a mass of 15.4 g What mass of H2 gas (in g) would be produced by the complete reaction of the aluminum block?.

  82. Science

    A wire connects a piece of aluminum suspended in an aqueous solution of aluminum nitrate in a beaker to a piece of iron suspended in an aqueous solution of iron (II) nitrate in another beaker. Write the balanced chemical equation for this voltaic cell.

  83. chemistry

    An insulated beaker contains 250.0 grams of water at 25oC. Exactly 41.6 g of a metal at 100.0oC was dropped in the beaker. The final temperature of the water was 26.4oC. Assuming that no heat is lost in any other way, calculate the specific heat of the

  85. chemistry

    An insulated beaker contains 250.0 grams of water at 25oC. Exactly 41.6 g of a metal at 100.0oC was dropped in the beaker. The final temperature of the water was 26.4oC. Assuming that no heat is lost in any other way, calculate the specific heat of the

  86. Physics

    Two blocks of identical mass are placed in water. One is made of aluminum, the other of wood. The wood block is noted and therefore floating. Upon which is the buoyant force greater? 1) on the aluminum block, 2) on the wood block or 3) they both experience

  87. Chem

    Precision, Accuracy, and Percent Error: _______________________________________ Suppose a student measures the volume of an aluminum block three times and records the following data: 8.42 cm^3, 8.41 cm^3, and 8.40 cm^3. The accepted volume of the aluminum

  88. Chemistry

    You have three beakers. Beaker 1: lithium carbonate Beaker 2: strontium sulfide Beaker 3: magnesium sulfate You add a solution of sodium nitrate to each of the beakers and wait for a double displacement reaction to occur. Which beakers have precipitates

  90. physics

    A 1.67-kg block of aluminum at 21.7°C is to be melted and reshaped. How much heat must flow into the block in order to melt it? use the following values: For copper: c_copper=0.386 kJ/kg.K T_fusion=1359 K L_fusion=205 kg/K For aluminum: c_aluminum=0.900

  91. physics

    A 3.00-liter aluminum cylinder at 5.00°C is filled to the brim with gasoline at the same temperature. If the aluminum and gasoline are warmed to 52.0°C, how much gasoline spills out? [Hint: Be sure to account for the expansion of the container. Also,

  92. chemistry

    valerie placed 1.0g of salt into one beaker, 1.0g of soil into a second beaker, and 2.0g of sugar in a third beaker. She then added 200mL of water to each beaker and stirred the contents for 3 mintues. How many compounds and how many mixtures did Valerie

  93. Physics

    A metal block of mass 1.840 kg is hanging from a string. The tension in the string is 9.972 N. The block is submerged in a beaker of fluid and is stationary. What is the magnitude and direction of the buoyant force acting on the block? Consider making a

  95. chemistry

    A student is given 3 beakers: Beaker 1- 50.0 ml of a solution produced by dissolving 6.00 grams of a weak monoprotic acid ,HX, in enough water to produce 1 liter of solution. The empirical formula of HX is CH2O. The solution contains 3 drops of

  96. physics

    A hollow aluminum cylinder 22.5 cm deep has an internal capacity of 2.000 L at 16.0°C. It is completely filled with turpentine at 16.0°C. The turpentine and the aluminum cylinder are then slowly warmed together to 70.0°C. (The average linear expansion

  97. Chemistry

    A 22.0 g piece of aluminum at 0.0°C is dropped into a beaker of water. The temperature of the water drops from 92.0°C to 77.0°C. What quantity of heat energy did the piece of aluminum absorb? Please Help, I'm so lost :( Thank you

  98. Chemistry

    A 22.0 g piece of aluminum at 0.0°C is dropped into a beaker of water. The temperature of the water drops from 92.0°C to 77.0°C. What quantity of heat energy did the piece of aluminum absorb? Please Help, I'm so lost :( Thank you

  100. chemistry

    An aluminum engine block has a volume of 4.86 L and a mass of 12.75 kg. What is the density of the aluminum in grams per cubic centimeter?

  101. Science

    A wire connects a piece of aluminum suspended in an aqueous solution of aluminum nitrate in a beaker to a piece of iron suspended in an aqueous solution of iron (II) nitrate in another beaker.

  102. Chemistry

    A silver block, initially at 59.8 ∘C, is submerged into 100.0 g of water at 24.6 ∘C, in an insulated container. The final temperature of the mixture upon reaching thermal equilibrium is 26.6 ∘C. What is the mass of the silver block?

  103. science

    A 0.25 kg length of aluminum wire is warmed 10.0 degrees by an electric current. How much heat was generated by the current?

  105. physics

    a .250kg block of aluminum is heated to 100 C and then dropped into .60 kg of water that is initially at 20C. What is the equilibrium temperature of the system? The specific heat of aluminum is .22 kcal/kg C

  106. conversion problems

    Im not sure how to convert these because of the cm cubed heres the question: An aluminum engine block has a volume of 4.88 L and a mass of 12.60 kg. What is the density of the aluminum in grams per cubic centimeter? so its gonna be something g/cm3 can you

  107. Mathematics

    One cubic centimetre of aluminum weigh 2.70g. What is the weight in grams of a rectangular block of aluminum 50cm long,7.5cm broad and 12cm high

  108. Physics

    An aluminum block slides along a horizontal surface. The block has an initial speed of 11.6 m/s and an initial temperature of 10.7°C. The block eventually slides to rest due to friction. Assuming all the initial kinetic energy is converted to heat energy

  110. science

    A magnet is plunged into and out of a coil of wire 2 times per second. This induces 5 volts. a- If the rate of motion changes so that the magnet is plunged in and out 6 times per second, what will be the new induced voltage?

  111. Chemistry

    Why is a beaker more acurrate to use when measuring the evaporation over a period of time of a liquid instead of an Erlenmayer flask??? I don't know that it is. It depends upon the size of the Erlenmeyer flask, the beaker, how much water is in the

  112. math

    Beaker A,B and C contain water with a total volume of 1 litre.Beaker B has 125 millilitres less water than beaker A. Beaker B has twice as much water than Beaker C.Find the volume of water in beaker B.

  113. Science

    a block of aluminum weighing 145. g is cooled from 98.4 c to 62.2 c with the release of 1080 joules of heat. from this data, calculate the specific heat of aluminum

  115. Chemistry

    Please help me with the questions at the end of this chemistry lab.Thank you for any help you can provide. 1. This experiment requires you to do 7 trials with varying amounts of Na©üCO©ý. 2. Take a clean 50 mL beaker from the Glassware shelf and place

  116. physics

    A 1.67-kg block of aluminum at 21.7°C is to be melted and reshaped. How much heat must flow into the block in order to melt it? c_aluminum=0.386 kJ/kg.K T_fusion=1359 K L_fusion=205 kg/K

  117. Stoichiometery

    1. This experiment requires you to do 7 trials with varying amounts of Na©üCO©ý. 2. Take a clean 50 mL beaker from the Glassware shelf and place it on the workbench. This is beaker # 1. 3. Take a balance from the Tools shelf and drop it on the beaker.

  118. physics

    Which would be bigger, a 20 kg block of aluminum or a 10 kg block of copper? Why?

  120. physis

    Search: 2. Explain how radioactive decay has always warmed the Earth from the inside, and nuclear fusion has always warmed Earth from the outside.

  121. Chemistry

    Sulfuric acid can dissolve aluminum metal according to the following reaction. 2Al(s)+3H2SO4(aq)→Al2(SO4)3(aq)+3H2(g) Suppose you wanted to dissolve an aluminum block with a mass of 24.4g . What minimum amount of H2SO4 in grams would you need?

  122. Chemistry

    I would really appreciate it if someone would please help me out with this lab, Stoichiometry by Loss of CO2, from my 12th grade chemistry class. 1. This experiment requires you to do 7 trials with varying amounts of Na2CO2. 2. Take a clean 50 mL beaker

  123. Physics

    Work of 700 J is done by stirring an insulated beaker containing 110 g of water. (a) What is the change in the internal energy of the system? J (b) What is the change in the temperature of the water? °C

  125. chemistry

    25.0 mL of ethanol (density = 0.789 g/mL) initially at 5.5°C is mixed with 32.3 mL of water (density = 1.0 g/mL) initially at 25.3°C in an insulated beaker. Assuming that no heat is lost, what is the final temperature of the mixture?

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20