# A 2.50 gram sample of bronze was dissolved in sulfuric acid. The copper in the sample reacted with sulfuric acid to form copper sulfate. Cu (s) +2 H2SO4 (aq) -> CuSO4 (aq) +2 H2O (l) The copper sulfate formed in

25,721 results
1. ## chemistry HELP

A 46.2 gram sample of copper is heated to 95.4 degrees celcius and then place into a calorimeter containing 75.0 grams of water at 19.6 degrees celcius. The final temp of the water and copper is 21.8 degrees celcius. Calculate the specific heat capacity of

2. ## chemistry

a copper sample has a mass of 44.65 g and a volume of 5.0cm^3. what is the density of copper, expressed as gram per cubic centimeter? can you please write the formula then show the working? thank you really appreciate it

3. ## Chemistry

1.025g of an impure sample of a weak acid HX(mol mass = 82) is dissolved in 60ml of water and titrated with 0.25M NaOH. When half of the acid was neutralized the pH was found to be 5.0 and at the equivalence point the pH is 9.0. Find the % purity of this

4. ## Chemistry

Ferrochrome is an alloy of iron and chromium. Ferrochrome can be dissolved in dilute sulfuric acid to produce a mixture of FeSO4 and Cr2(SO4)3. The FeSO4 reacts with K2Cr2O7 in acid solution according to the following equation. 14H+ + 6Fe2+ + Cr2O7 2–

5. ## chemistry

Hi, I need help figuring out this question. An impure sample of barium hydroxide, Ba(OH)2 (aq), has a mass of 0.540 g. It is dissolved in water and then treated with excess sulfuric acid, H2SO4(aq). This results in the formation of a precipitate of barium

6. ## chem

which one of the following statements about sulfuric acid is correct? A. sulfuric acid is a known muriatic acid B. sulfuric acid is a strong oxidizing agent C. sulfuric acid has little effect on metals D. sulfuric acid is dangerous to living organisms B

7. ## Chemistry

A 2.50 gram sample of bronze was dissolved in sulfuric acid. The copper in the sample reacted with sulfuric acid to form copper sulfate. Cu (s) +2 H2SO4 (aq) -> CuSO4 (aq) +2 H2O (l) The copper sulfate formed in this reaction was mixed with I to form

8. ## chemistry.

A student was asked to make some copper(II) sulfate-5-5 (CuSO4.5(H2O) BY reacting copper(II) oxide (CuO) with sulfuric acid. a) Calculate the molar mass of the copper (II) sulfate-5-water which is (64+32+64) + (10+80)=250 mol b)Calculate the amount (in

9. ## Analytical chemistry

A 0.6334 gram of sample of impure mercury (II) oxide was dissolved in an unmeasured excess of potassium iodide. Reaction: HgO + 4I- + H2O ------→HgI42- + 2OH- Calculate the % HgO in the sample if titration of the liberated hydroxide required 42.59 ml of

10. ## Chemistry

5. Phosphorus fertilizers are derived from phosphate rocks, called fluorapatite, Ca5(PO4)3F(s) . Fluorapatite is insoluble in water, so it must first be dissolved using excess sulfuric acid to form water-soluble calcium dihydrogen phosphate Ca(H2PO4)2. If

11. ## NEED HELP WITH CHEMISTRY HW

Ascorbic acid (vitamin C) is a diprotic acid having the formula H2C6H6O6. A sample of a vitamin supplement was analyzed by titrating a 0.2894 g sample dissolved in water with 0.0215 M NaOH. A volume of 10.83 mL of the base was required to completely

12. ## Chemisty

A 0.411 g sample of powdered copper mixed with an inert, soluble additive was fully consumed by 23.4mL of 0.602M nitric acid, producing copper (II) nitrate, water, and nitric oxide. What is the percent copper by mass in the sample? 3Cu + 8HNO3 = 3Cu(NO3)2

13. ## chemistry

The specific heat of copper is .4 joules/gram degrees Celsius. How much heat is needed to change the temperature of a 30 gram sample of copper from 20 degrees to 60 degrees? I just need to know how to set up the problem and solve it.

14. ## chemistry

mass of crucible- 26.4574g mass of crucible and hydrated sample- 27.7617g mass of hydrated sample 1.3043g mass of crucible and dehydrated sample- 27.5693g mass of dehydrated sample- 1.1119g mass of filter paper- 0.7089g mass of filter paper and copper-

15. ## general chemistry

a solution of sulfuric acid was titrated with sodium hydroxide. if you took 23.7 mL of .025 M NaOH to reach the endpoint with a 5.0 mL sample of the acid what was its concentration?

16. ## Chemistry

H20SO4(aq)-> 2H+(aq) + SO4 2- (a) Calculate the hydrogen ion concentration (in mol 1-1) in this solution. Show steps and explain your reasoning Also what is the pH of the sulfuric acid solution nearet whole number You don't have any numbers. Sulfuric Acid

17. ## Chemistry

Suppose you titrated a sample of sulfuric acid (diprotic acid) with a 0.250 M solution of NaOH. Given the data in the table below, what is the concentration of the sulfuric acid solution?

18. ## chemistry

A 1.2431 -g alloy sample was analyzed for its copper content iodometrically. The alloy was dissolved in hot, concentrated nitric acid and prepared for analysis. The addition of excess KI(aq) solution precipitated the copper as cuprous iodide and liberated

19. ## Chemistry

Item 1 Maleic acid is a carbon-hydrogen-oxygen compound used in dyeing and finishing fabrics and as a preservative of oils and fats. •In a combustion analysis, a 1.054-g sample of maleic acid yields 1.599 g of CO2 and 0.327 g of H2O. •When 0.609 g of

20. ## ap chemistry

A mixture contains only NaCl and Fe(NO3)3. A .456 gram sample of the mixture is dissolved in water and an excess of NaOH is added, producing a precipitate of Fe(OH)3. The precipitate is dried and filtered, and its mass is determined to be .107 g. The mass

21. ## AP Chemistry

A 65 mL sample of a solution of sulfuric acid is neutralized by 46 mL of a 0.14 M sodium hydroxide solution. Calculate the molarity of the sulfuric acid solution. Answer in units of mol/L

22. ## chemistry

Copper can be determined gravimetrically by precipitation as copper(I)thiocyanate, CuSCN. A wrought aluminum-copper sample(4.5167 g) was dissolved in a minimum amount of concentrated HCl followd by the additon of 25 ml of sulfurous acid to reduced the

23. ## CHEM HELP ASAP

I figured all the parts of the problem except for the last one. Can you tell me what to do? In the preparation of a mustard solution, an individual package of mustard was emptied into a beaker and the mass was determined to be 3.809 grams. The mustard was

24. ## CHEM HELP ASAP

I figured all the parts of the problem except for the last one. Can you tell me what to do? In the preparation of a mustard solution, an individual package of mustard was emptied into a beaker and the mass was determined to be 3.809 grams. The mustard was

25. ## ap chemistry

A 0.456 gram sample of an unknown mono- protic acid (let’s call it HZ) was dissolved in some water (you pick the amount). Then the acidic solution was titrated to the equivalence point with 32.5 mL of 0.174 M KOH. What is the molecular weight of the

26. ## Chemistry

A sample of the compound prepared in this experiment, weighing .1021g, is dissolved in HNO3 and diluted to a volume of 100mL. A 10mL aliquot of that solution is mixed with 10mL 6 M NH3. The [Cu(NH3)4 2+] in the resulting solution is 5.16x10^-3 M. How many

27. ## chemistry

A 0.8552g sample of copper alloy is treated with 8 molar nitric acid and filtered and the precipitate is ignited giving a residue of 0.0632g of SnO2. The zinc is determined in one half of the filterate by precipitating it as ZnNH4PO4 and then igniting with

28. ## Chemistry

0.5g sample of bronze containing Zn is dissolved in 100ml of acid. An aliquot of 25ml requred 10.25ml of EDTA. What is the percentage of zinc in the bronze sample?

29. ## Chemistry

Phosphorus fertilizers are derived from phosphate rocks, called florapatite, Ca5(PO4)3F. Fluorapatite is insoluble in water, so it must first be dissolved using excess sulfuric acid to form water soluble calcium dihydrogen phosphate Ca(H2PO4)2. If a

30. ## Chemistry

A chemist needs a 50% of sulfuric acid. She mix 2 liters of 20% of sulfuric acid with a sample of 60% of sulfuric acid. Write a equatoin that models the situation and use it to find how much the 50% of the sulfuric acid she needs to use?

31. ## chemistry

A 2.00 gram sample of Copper (II) acetate produced 2.48 grams of a Copper (II) Formate Hydrate. After heating the sample the final mass of the Copper (II) Formate was 1.69 grams. What was the degree of hydration for the Copper (II) Formate?

32. ## Chemistry

A sodium hydroxide sample is contaminated with sodium chloride. A 0.240 gram sample of this impure sample is dissolved in water and titrated with 21.50 mL of 0.130 M H2C2O4. Calculate the percent sadium hydroxide in the impure sample [(mass of NaOH in

33. ## Chemistry

Enough concentrated sulfuric acid solution was added to provide 3.00 grams of sulfuric acid which dissolved 4.00 grams of pure fluorapatite. How much excess sulfuric acid was used? Or, in other words how much sulfuric acid was left after it reacted.

34. ## Chemistry

Ascorbic acid (vitamin C) is a diprotic acid having the formula H2C6H6O6. A sample of a vitamin supplement was analyzed by titrating a 0.3252 g sample dissolved in water with 0.0284 M NaOH. A volume of 13.27 mL of the base was required to completely

35. ## Chemistry

Ascorbic acid (vitamin C) is a diprotic acid having the formula H2C6H6O6. A sample of a vitamin supplement was analyzed by titrating a 0.3252 g sample dissolved in water with 0.0284 M NaOH. A volume of 13.27 mL of the base was required to completely

36. ## Chemistry

The density of copper decreases as temperature increases. Which statement accurately describes the changes in a sample of copper when it is warmed from room temperature to 95 degree Celcius. a. The sample will become lighter. b. The sample will become

37. ## Chemistry

So the answer is c,correct? The density of copper decreases as temperature increases. Which statement accurately describes the changes in a sample of copper when it is warmed from room temperature to 95 degree Celcius. a. The sample will become lighter. b.

38. ## Chemistry

A 2.5g sample of impure Copper was analyzed by allowing it to react with 45mL of 5M Nitric Acid to form Copper (II) Nitrate, Nitrogen Dioxide, and Water. Of the Nitric Acid, .0125mol remained. Assuming impurities do not react, what is the % Copper in the

39. ## math

Bronze is an alloy or mixture of the metals copper and tin. The properties of bronze depends on the percentage of copper in the mix. A chemist decides to study the properties of a given alloy of bronze as the proportion of copper is varied. She starts with

40. ## geology

suppose you have a sample of clamshell at a paleoindian site and you measure the 14c activity of aa 100-gram sample of carbon as 320 disintegretions per scond (or 3.2 disingtegrations per gram of carbon per second). a. what was the activity(in

41. ## science

which sample (salt,fertilizer and sulfuric acid) will have the most algae growth? and why ? which sample (salt,fertilizer and sulfuric acid)will have the most living organisms ? and why?

42. ## science

which sample (salt,fertilizer and sulfuric acid) will have the most algae growth? and why ? which sample (salt,fertilizer and sulfuric acid)will have the most living organisms ? and why?

43. ## College Chemistry

A 20.0 Ml sample of sulfuric acid is titrated with 25.0 ML of 1.0 M NaOH solution. What is the molarity of the sulfuric acid? H2SO4+ 2NaOH yields Na2SO4 + H2O

44. ## chemistry

A copper wire weighing 5.463g was dissolved in excess nitric acid, precipitated as copper(2)carbonate with excess sodium carbonate, and then converted tooo copper(2) sulfate pentahydrate using excess sulfuric acid. A student carrying out these reactions

45. ## chemistry

When totally digested by acid and rocessed into a sample of one liter solution volume for spectroscopy, a 3.21 gram sample of alloy yeilded an absorbance of 0.288. Calculate the percent by wieght of iron in the alloy sample

46. ## chemistry

A 20.0 gram sample is a mixture of sodium phosphate ,sodium mono-hydrogen phosphate,sodium dihydrogen phosphate and sodium chloride. The sample is dissolved in 100.0 ml of deionized water and titrated with 1.5 M hydrochloric acid. The initial pH of the

47. ## chemistry

A 20.0 gram sample is a mixture of sodium phosphate ,sodium mono-hydrogen phosphate,sodium dihydrogen phosphate and sodium chloride. The sample is dissolved in 100.0 ml of deionized water and titrated with 1.5 M hydrochloric acid. The initial pH of the

48. ## chemistry

Copper reacts with sulfuric acid according to the following equation: 2H3SO4 + Cu-> CuSO4 + 2H2O + SO2 How many grams of sulfur dioxide are created by this reaction if 14.2 g of copper reacts with 18 g of sulfuric acid?

49. ## chemistry

Copper reacts with sulfuric acid according to the following equation: 2H3SO4 + Cu-> CuSO4 + 2H2O + SO2 How many grams of sulfur dioxide are created by this reaction if 14.2 g of copper reacts with 18 g of sulfuric acid?

50. ## chemistry

Copper reacts with sulfuric acid according to the following equation: 2H3SO4 + Cu-> CuSO4 + 2H2O + SO2 How many grams of sulfur dioxide are created by this reaction if 14.2 g of copper reacts with 18 g of sulfuric acid?

51. ## chemistry

The amount of copper was determined in 10 g sample. copper was precipitated, filtered and calcined, obtaining a final precipitate of 0.79 g oxide of copper , What % in copper mass in this sample?

52. ## Chemistry

Enough concentrated sulfuric acid solution was added to provide 3 grams of sulfuric acid which dissolved i4 grams of pure fluorapatite. How much excess sulfuric acid was used? (report answer in grams of H2SO4

53. ## Analytical chemistry

an 0.5031 gram sample of iron ore is determined through redox titration using K2Cr2O7. The sample was dissolved in HCl and all the iron was converted to the 2+ state. Titration to the endpoint required 24.34 mL of 0.01887 mol/L K2Cr2O7. Calculate the

54. ## Chemistry Help.......

Sulfuric Acid (H2SO4) is a strong acid, which dissociates when dissolved in water according to the following equation: H20SO4(aq)-> 2H+(aq) + SO4 2- (a) A 0.21g sample of sulfuric acid is dissolved completely in sufficiebt water to make 0.25litre of the

55. ## Chemistry

2.500g sample of a mixture of sodium carbonate and sodium chloride is dissolved in 25.00ml of 0.798M HCl. Some acid remains after the treatment of the sample. If 28.7 ml of 0.0108M NaOH were required to titrate the excess hydrochloric acid how many moles

56. ## college geology help please

I was the same person from yesterday. I need help on a question. I don't type very good so I have one of my host family do it for me. so please help us. Suppose you have a sample of clamshell at a Paleoindian site and you measure the 14C activity of a

57. ## chemistry help!

I have a chemistry test tomorrow and I'm trying to study but none of these questions in the book make sense to me:( Help! 1. Commericially available concentrated sulfuric acid is 95% H2SO4 by mass and has a density of 1.84g/mL. How many milliliters of this

58. ## ap chemistry

A 37 mL sample of a solution of sulfuric acid is neutralized by 42 mL of a 0.113 M sodium hydroxide solution. Calculate the molarity of the sulfuric acid solution. Answer in units of mol/L

59. ## Chemistry

A 69 mL sample of a solution of sulfuric acid is neutralized by 41 mL of a .161 M sodium hydroxide solution. Calculate the molarity of the sulfuric acid solution. Answer in units of mol/L.

60. ## Chemistry

A 53 mL sample of a solution of sulfuric acid is neutralized by 37 mL of a 0.18 M sodium hydroxide solution. Calculate the molarity of the sulfuric acid solution. Answer in units of mol/L

61. ## college Geol 101

Suppose you have a sample of clamshell at a Paleoindian site and you measure the 14C activity of a 100-gram sample of carbon as 320 disintegrations per minute (or 3.2 disintegrations per gram of carbon per minute). a.What was the activity (in

62. ## Chemistry

A 0.4671g sample containing sodium bicarbonate (a mono acidic base) is dissolved and titrated with standard solution of HCl acid requiring 40.72cm^3. ( the HCL was standardized by titrating 0.1876NaCO3 which required 37.86cm^3 of acid). Calculate the

63. ## Chemistry

A sample of concentrated H2 S o4 is 95.7% of H2 S o4 by weight and its density is 1.84 gram per ml how many gram of pure H2 S o4 are contained in 1 litre of acid

64. ## Chemistry - Science (Dr. Bob222)

A student wanted to determine the amount of copper in a sample of copper ore. The student dissolved a 2.500 ± 0.001 g piece of copper ore in about 75 mL of nitric acid; then, a complexing agent was added. The student transferred this solution to a

65. ## College Gen.Chemistry

A student wanted to determine the amount of copper in a sample of copper ore. The student dissolved a 2.500 ± 0.001 g piece of copper ore in about 75 mL of nitric acid; then, a complexing agent was added. The student transferred this solution to a

66. ## chemistry

A sulfuric acid solution at 25 °C has a density of 1.27 g/mL. A 20.0-mL sample of this acid is measured out at 25 °C, introduced into a 50-mL flask, and allowed to cool to 21 °C. The mass of the flask plus solution is then measured at 21 °C. Use the

67. ## Chemistry

A 16.48 g sample of potassium permanganate is dissolved in a 250.0 mL volumetric flask. A 125.1 mL sample of the potassium permanganate solution is added to 75.3 mL of 5.110 M hydrobromic acid in which 32.3 mL of ethanol has been dissolved (d = 0.7891

68. ## Chemistry

If a 40 gram sample of radioactive isotope was present at 4pm, but a 5 gram sample remained at 4:30 pm, what is the half-life in minutes?

69. ## biochem

Two samples of double-stranded DNA have been prepared. Nucleotide analysis reveals that sample 1 is found to be 21% A, while sample 2 is 26% G. Knowing this, which of the following statements is true? Sample 1 has a higher AT content than Sample 2. Sample

70. ## chemistry

if a sample of alloy containing magnesium and metal that doesn't react wtih hydrochloric acid are reacted, how much heat would be evolved from a 5 gram sample that is 30% magnesium?

71. ## CHEMISTRY

In a certain compound of copper and oxygen, a sample weighing 0.5424g contains 0.4831 g of Cu. How many moles of Cu in the sample? How many grams of Oxygen and how many moles of Oxygen are there in the sample? What is the mole ratio of Cu/O in the sample?

72. ## chemistry

In a certain compound of copper and oxygen, a sample weighing 0.5424g contains 0.4831 g of Cu. How many moles of Cu in the sample? How many grams of Oxygen and how many moles of Oxygen are there in the sample? What is the mole ratio of Cu/O in the sample?

73. ## CHEM PROB MR BOB

I figured all the parts of the problem except for the last one. Can you tell me what to do? In the preparation of a mustard solution, an individual package of mustard was emptied into a beaker and the mass was determined to be 3.809 grams. The mustard was

74. ## chemistry

Sulfuric acid is a strong acid and dissociates in water as shown in Reaction 4. Equation label: (4) Help Please!!!! H2SO4(aq) = 2H+(aq) + SO42-(aq) What is the hydrogen ion concentration, in mol dm−3, when 1.50 g of sulfuric acid is dissolved in water to

75. ## qnt/351

Which of the following statements about the two sample sizes is NOT true? Assume thepopulation standard deviations are equal A. Sample A = 11; sample B = 13 B. Sample A = 12; sample B = 14 C. Sample A = 13; sample B = 13 D. Sample A = 10; sample B = 16

76. ## chemistry

In a certain compound of copper and oxygen, a sample weighing 0.5424 g contains 0.4831 g Cu. How many moles of copper are in the sample and the mass of oxygen in the sample?

77. ## Chem Problem

I originally asked you the first question and I got the answer 7.7 but theres other parts to the problem but Im not sure what to do In the preparation of a mustard solution, an individual package of mustard was emptied into a beaker and the mass was

78. ## Chem Problem

I originally asked you the first question and I got the answer 7.7 but theres other parts to the problem but Im not sure what to do In the preparation of a mustard solution, an individual package of mustard was emptied into a beaker and the mass was

79. ## Chemistry

Suppose you had a 100.0 gram sample of iron and that 1.00 kJ is applied to the sample . by what amount would the temperature of the sample be raised?

80. ## Chemistry

Question: a 25.00 mL. aliquot of a solution containing TI(aq) was treated with K2CrO4. the TI2CrO4 was filtered, washed free of excess precipitation reagent, and dissolved in dilute sulfuric acid. the dichromate ion produced was titrated with 40.60 mL. of

81. ## Chemistry

An iron nail with a mass of 0.750 g was dissolved in dilute sulfuric acid and diluted to 100.0 mL volume. A 10.0 mL aliquot of this solution was then titrated with standard 0.200 M potassium permanganate solution, according to the following equation: MnO4-

82. ## Chemistry

Part 1 : a.) How many grams of Hydrogen will be contained in a 100.000 g sample of magnesium hydroxide.? c.) How many grams of nitrogen will be contained in a 120.0 g sample of calcium cyanide? ________________________________________ Part 3: d.) How many

83. ## Chemistry

a 15ml sample of sulfuric acid was titrated against a solution of .0100 mol per litre of sodium hydroxide. to bring about neutralization, 25.00 ml of sodium hydroxide solution was required. calculate the concentration of the sulfuric acid

84. ## Chemistry

A 0.446-gram sample of iron ore is dissolved in HCl and the iron (Fe solid) is reduced to Fe2+. The solution is then titrated by 38.6mL of 0.105 N KMn)4. Calculate the percentage of Fe in the iron ore sample.

85. ## Chemistry

A sample of the compound prepared in this experiment, weighing .1021g, is dissolved in HNO3 and diluted to a volume of 100mL. A 10mL aliquot of that solution is mixed iwth 10mL 6 M NH3. The [Cu(NH3)4 2+] in the resulting solution is 5.16x10^-3 M. How many

86. ## chemistry

Not sure how to do any of this. Please help!!! A sample of the compound prepared in this experiment, weighing .1021g, is dissolved in HNO3 and diluted to a volume of 100mL. A 10mL aliquot of that solution is mixed iwth 10mL 6 M NH3. The [Cu(NH3)4 2+] in

87. ## chem

A greenish blue salt known to be composed of copper and chloride ions is dissolved in DI water. Aluminum metal is used to reduce the copper ions to metallic copper, which is collected, dried and weighed. If the origanal sample has a mass 1.362g and the

88. ## chemistry

1.000 g of bronze was dissolved in the mixture of acids. The solution was transferred into 100 ml volumetric flask and filled to the mark. 10 ml aliquote of this solution was transferred into another 100 ml flask and diluted to the mark. 10 ml of the

89. ## chemistry

A 3.555 g sample of a monoprotic acid was dissolved in water. It took 23.32 mL of a 0.875 M NaOH to neutralize the acid. Calculate the molar mass of the acid.

90. ## chemistry

A 3.555 g sample of a monoprotic acid was dissolved in water. It took 23.32 mL of a 0.875 M NaOH to neutralize the acid. Calculate the molar mass of the acid.

91. ## chemistry

If the titration of a 30.0 mL sample of sulfuric acid requires 27.65 mL of 0.090 M sodium hydroxide, what is the molarity of the acid? H2SO4(aq)+2NaOH(aq)→Na2SO4(aq)+2H2O(l)

92. ## Chemistry

Pre-Lab Questions Data: [mass of copper wire] 0.738 g [standard solutions] solution 1: 0.738 g of copper wire dissolved in 50.00 mL solution solution 2: 1:2 dilution of solution 1 solution 3: 1:4 dilution of solution 1 [absorbance data at lambda(max)]

93. ## chemistry

a sample of iron are is known as Fe3O4. A 50 gram of sample contain 26 gram of Fe. Determine % yield Fe3O4 In sample

94. ## chemistry

What will be the total mass of a 73.3 gram flask and its contents if it contains 20.1 mL of concentrated sulfuric acid with density 1.84 gram per mL?

95. ## chemistry help

sulfuric acid is a strong acid and dissociates in water as shown in reaction H2SO4(aq)=2H^+(aq)+SO4^2-(aq) what is the hydrogen ion concentration, in mol dm^-3,when 1.50g of sulfuric acid is dissolved in water to give 0.500dm^3 of solution ?show all of

96. ## Chemistry

A 25.00 mL sample of sulfuric acid is titrated with 6.02 x 10^2 M barium hydroxide. The equivalence point is reached at 21.68 mL of barium hydroxide solution. what is the molarity of the sulfuric acid solution?

97. ## chemistry

KNO3+H2SO4=K2SO4+HNO what mass of sulfuric acid in gram is needed for 2 moles of potassium nitrate? how many moles of mitric acid will be produced from 5 moles of sulfuric acid? what mass in gram of potassium sulfate will be produced from 5 moles of

98. ## Chemistry

A 0.528 gram sample of a metal, M, reacts completely with sulfuric acid according to: M+H2SO4 -> MSO4+H2 A volume of 205 mL of hydrogen is collected over water; the water level in the collecting vessel is the same as the outside level. Atmospheric pressure

99. ## Chemistry

A sample of 50.0 mL if sulfuric acid that has a density of 1.84 g/mL would have a mass of how many grams?

100. ## chemistry

2,4,6-Trinitroanilin can be prepared by nitration of p-nitroaniline with nitrate ions in the acidic solution. Chemical engineer sounds 0.50 grams of p-nitroaniline (dissolved in sulfuric acid) to react with 0.60 g of sodium nitrate (dissolved in sulfuric