# A 10.0N frictionless pulley is suspended from an overhead supported by a chain. two weights suspend off the pulley. One weight is 30.0N and the other is 20.0N. (a) What is the tension on the rope?

8,606 results
1. ## Physics

A 10.0N frictionless pulley is suspended from an overhead supported by a chain. two weights suspend off the pulley. One weight is 30.0N and the other is 20.0N. (a) What is the tension on the rope? (B) what is the acceleration of the weights? (c) what is
2. ## Physics

A 10.0N frictionless pulley is suspended from an overhead supported by a chain. two weights suspend off the pulley. One weight is 30.0N and the other is 20.0N. (a) What is the tension on the rope? (B) what is the acceleration of the weights? (c) what is
3. ## Physics

Note: I am in Algebra-based Physics Two 35.0 N weights are suspended at opposite ends of a rope that passes over a light, frictionless pulley. The pulley is attached to a chain that is fastened to the ceiling. Start solving this problem by making a
4. ## phy

A weightless string is suspend on a frictionless pulley, a mass of 6 kg. is suspend at one end and mass of 10 kg. is suspended on the other end of the string, the tension in the string will be :
5. ## Physics-Mechanics

A pulley is massless and frictionless. 3 kg, 2 kg, and 6 kg masses are suspended. What is the tension T1 in the string between the two blocks on the left-hand side of the pulley?
6. ## physics

Guys help with my physics please!!! Four 40-gram weights are suspended at the 13-cm 21-cm 35-cm and 74-cm marks of a uniform meter stick.if the stick is supported at the mid point what load must be suspended at the 82 cm mark to attain equilibrium please
7. ## Physics

The Atwood Machine consists of two masses suspended form a fixed pulley. If the first mass is 0.55kg and 0.8kg, (a) what is the acceleration of the system? (b) What is the magnitude of the tension in the string? (consider the pulley to be frictionless and
8. ## physics

Two identical weights of mass M are linked by a thread wrapped around a frictionless pulley with a fixed axis. A small weight of mass ‘m’ is placed on one of the weights. What is reaction force between m and M?
9. ## physics

A 15.0 kg mass and a 10.0 kg mass are suspended by a pulley that has a radius of 10.0 cm and a mass of 3.0 kg. The cord has negligible mass and causes the pulley to rotate without slipping. The puller is frictionless and may be treated as a uniform solid
10. ## Physics

The pulley system shown in the figure is used to lift a 52-{\rm kg} crate. Note that one chain connects the upper pulley to the ceiling and a second chain connects the lower pulley to the crate. The crate is rising with an acceleration of 2.5 m/s^2.
11. ## Physics

This is another problem that I need clarification on since no one seems to be of any help at my school, A pulley system is used to lift a 52- crate.Note that one chain connects the upper pulley to the ceiling and a second chain connects the lower pulley to
12. ## Physics

A 1.40- block is on a frictionless, 20 inclined plane. The block is attached to a spring ( = 40.0 ) that is fixed to a wall at the bottom of the incline. A light string attached to the block runs over a frictionless pulley to a 60.0- suspended mass. The
13. ## physics

The pulley system in Figure 6-25 is used to lift a crate of mass m = 41 kg. Note that a chain connects the upper pulley to the ceiling and a second chain connects the lower pulley to the crate. Assume that the masses of the chains, pulleys, and ropes are
14. ## physics

a mechanic uses a chain and bloc pulley to lift a 875-kg engine 4.0 m to the top of the garage. the downward force on the chain over the 4.0 m distance is 5.0 x 10^4 N. a)calculate the work done in raseing the motor b)how much useful work was done c)what
15. ## physics

Two masses are suspended from a pulley as shown in the figure below (the Atwood machine). The pulley itself has a mass of 0.20 kg, a radius of 0.15 m, and a constant torque of 0.35 m·N due to the friction between the rotating pulley and its axle. What is
16. ## physics

Two masses are suspended from a pulley as shown in the figure below (the Atwood machine). The pulley itself has a mass of 0.20 kg, a radius of 0.15 m, and a constant torque of 0.35 m·N due to the friction between the rotating pulley and its axle. What is
17. ## physics

Two masses are suspended from a pulley as shown in the figure below (the Atwood machine). The pulley itself has a mass of 0.20 kg, a radius of 0.15 m, and a constant torque of 0.35 m·N due to the friction between the rotating pulley and its axle. What is
18. ## Physics

Two masses are suspended from a pulley as shown in the figure . The pulley itself has a mass of 0.30 kg, a radius of 0.20 m, and a constant torque of 0.30 m \cdot N due to the friction between the rotating pulley and its axle. What is the magnitude of the
19. ## Physics

Two masses are suspended from a pulley as shown in the figure . The pulley itself has a mass of 0.30 kg, a radius of 0.20 m, and a constant torque of 0.30 m \cdot N due to the friction between the rotating pulley and its axle. What is the magnitude of the
20. ## Physics

The pulley system shown in the figure is used to lift a 37 kg crate. Note that one chain connects the upper pulley to the ceiling and a second chain connects the lower pulley to the crate. Assume that the masses of the chains, pulleys, and ropes are
21. ## physics

Three blocks are suspended at rest by the system of strings and frictionless pulleys shown in the figure below, where W = 29.0 . What are the weights w1 and w2?
22. ## phy

Three blocks are suspended at rest by the system of strings and frictionless pulleys shown in the figure below, where W = 29.0 N, and è = 26.6°. What are the weights w1 and w2?
23. ## Physics

2 objects are connected on an inclined table. The objects have masses 8.0kg, 4.0kg, and 2.0kg, and the pulleys are frictionless. (The one that is 8.0 is suspended from a pulley off the left side of the table, 4.0kg is on the table, and 2.0kg is suspended
24. ## Physics

This is another problem that I need clarification on since no one seems to be of any help at my school, A pulley system is used to lift a 52- crate.Note that one chain connects the upper pulley to the ceiling and a second chain connects the lower pulley to
25. ## physics

A stone is suspended from the free end of a wire that is wrapped around the outer rim of a pulley, as shown in the figure (see the figure ). The pulley is a uniform disk with mass 10.4 and radius 51.0 and turns on frictionless bearings. You measure that
26. ## Newton's law

7. A uniform flexible chain of length l, with weight per unit length lamba, passes over a small, frictionless, massless pulley. It is released from a rest position with a length of chain x hanging from one side and a length l-x from the other side. Find
27. ## physics

Two bodies of mass 3kg and 4kg are suspended at the ends of massless string passing over a frictionless pulley .the acceleration system is
28. ## physics

a chain that can support 2000 N is suspended between two trees. a 200 kg motor hangs from the middle. the slack in the chain makes the half slant upward 20 degrees. will the chain break?
29. ## Physics

A massless string runs around two massless, frictionless pulleys, where one pulley is attached to the ceiling, and the other is suspended with a mass m. An object with mass m = 17 kg hangs from one pulley. A force F is exerted on the free end of the string
30. ## science

You have a pulley 13.9 cm in diameter and with a mass of 1.7 kg. You get to wondering whether the pulley is uniform. That is, is the mass evenly distributed, or is it concentrated toward the center or the rim? To find out, you hang the pulley on a hook,
31. ## physics

a one meter chain that weights one newton sits on a flat horizontal table that is one meter from the floor. the coefficient of friction between the chain and the table is 0.15. how much of the chain can dangle off the table until the chain pulls itself
32. ## physics

a uniform rod 100cm long and weighing 50N is supported on a horizontal position on a fulcrum which weights of 80N and 100N suspended on its ends. compute the position of the fulcrum
33. ## physics

a uniform rod 100cm long and weighing 50N is supported in a horizontal position on a fulcrum with weights 80N and 100N suspended from its end. compute the position of a fulcrum.draw the illustration.
34. ## Quick Science Question

I have a question. Is a Atwood Machine a suspended pulley? I have question asking me what the machine is, and there are two answers with the word pulley in them. I am really confused between the two. I have tried looking it up, and I get confused again
35. ## Physics-Mechanics

A pulley is massless and frictionless. 3 kg, 2 kg (on the left), and 6 kg (on the right) masses are suspended What is the tension T1 in the string be- tween the two blocks on the left-hand side of the pulley? Can I solve this like if it was two masses? My
36. ## Physics

Three equal masses are suspended from a frictionless, massless pulley system, as shown. Once the system has reached equilibrium, 1) what angles will the strings make with respect to the horizontal
37. ## physics

Two blocks (one of which is on a ramp) are attached via a string looped over a pulley. The block on the incline has a mass of 5.0 kg; the block hanging downward (suspended by the pulley) has a mass of 7.0 kg. Assume the usual things (non-stretchy massless
38. ## Physics

Two blocks (one of which is on a ramp) are attached via a string looped over a pulley. The block on the incline has a mass of 5.0 kg; the block hanging downward (suspended by the pulley) has a mass of 7.0 kg. Assume the usual things (non-stretchy massless
39. ## Physics

Two blocks (one of which is on a ramp) are attached via a string looped over a pulley. The block on the incline has a mass of 5.0 kg; the block hanging downward (suspended by the pulley) has a mass of 7.0 kg. Assume the usual things (non-stretchy massless
40. ## physics

Two blocks (one of which is on a ramp) are attached via a string looped over a pulley. The block on the incline has a mass of 5.0 kg; the block hanging downward (suspended by the pulley) has a mass of 7.0 kg. Assume the usual things (non-stretchy massless
41. ## Physics

A chain composed of four identical links is suspended by a rope and does not move. What are the forces on each chain? (include where they come from)
42. ## Physics

A chain composed of four identical links is suspended by a rope and does not move. What are the forces on each chain? (include where they come from)
43. ## Physics

A chain composed of four identical links is suspended by a rope and does not move. What are the forces on each chain? (include where they come from)
44. ## Pshyics

A meter stick has a mass of 0.12 kg and balances at its center. When a small chain is suspended from one end, the balance point moves 19.0 cm toward the end with the chain. Determine the mass of the chain.
45. ## physics

A pulley is suspended by a Cord (C). on one end of the pulley there is a 1.2 kg block and on the other is a 3.2 kg block.Determine the tension in this cord after the masses are released and before one hits the ground. Ignore the mass of the pulley and
46. ## PHYSICS

A block of mass 0.86 kg is suspended by a string which is wrapped so that it is at a radius of 0.061 m from the center of a pulley. The moment of inertia of the pulley is 4.60×10-3 kg·m2. There is friction as the pulley turns. The block starts from rest,
47. ## Help - physics

A block of mass 0.74 kg is suspended by a string which is wrapped so that it is at a radius of 0.060 m from the center of a pulley. The moment of inertia of the pulley is 0.0061 kg·m2. There is friction as the pulley turns. The block starts from rest, and
48. ## physics

A block of mass 0.74 kg is suspended by a string which is wrapped so that it is at a radius of 0.060 m from the center of a pulley. The moment of inertia of the pulley is 0.0061 kg·m2. There is friction as the pulley turns. The block starts from rest, and
49. ## physics

A block of mass 0.74 kg is suspended by a string which is wrapped so that it is at a radius of 0.060 m from the center of a pulley. The moment of inertia of the pulley is 0.0061 kg·m2. There is friction as the pulley turns. The block starts from rest, and
50. ## Physics Help Needed

Two blocks are connected by massless string that is wrapped around a pulley. Block 1 has a mass m1=6.90 kg, block 2 has a mass m2=2.30 kg, while the pulley has a mass of 1.70 kg and a radius of 12.2 cm. The pulley is frictionless, and the surface mass 1 is
51. ## physics

A light rope is attached to a block with a mass of 6 kg that rests on a horizontal, frictionless surface. THe horizontal rope passes over a frictionless, massless pulley, and a block of mass m is suspended from the other end. When the blocks are released,
52. ## science

an 8 kg and a 16 kg block are suspended at opposite ends of a cord passing over a pulley. compute (a) acceleration of the system (b) the tension in the cord connecting the blocks and (c) the tension in the cord supporting the pulley. The weight of the
53. ## physics

"By means of a rope, whose mass is negligible, two blocks (mass: 11kg and 44 kg) are suspended over a pulley. The pulley can be treated as a uniform solid cylindrical disk. The downward acceleration of the 44 kg block is observed to be exactly one half the
54. ## physics

"By means of a rope, whose mass is negligible, two blocks (mass: 11kg and 44 kg) are suspended over a pulley. The pulley can be treated as a uniform solid cylindrical disk. The downward acceleration of the 44 kg block is observed to be exactly one half the
55. ## physics

Consider the system shown in the figure below with m1 = 30.0 kg, m2 = 13.7 kg, R = 0.110 m, and the mass of the pulley M = 5.00 kg. Object m2 is resting on the floor, and object m1 is 4.60 m above the floor when it is released from rest. The pulley axis is
56. ## physics

A 5 ft chain is sitting on a table with 2 ft hanging off (3 ft sitting on table). The table is 4 ft high, and the chain slides frictionless off the table. The chain weighs 15 lb. What is the velocity of the chain when it first hits the ground.
57. ## physics

a 10.0m long bar is attached by a frictionless hing to a wall and held horizontally by a rope that makes an angle of 53 deg with the bar the bar is uniform and weights 39.9 N. how far from the hinge should a 10.0kg mass be suspended for the tension T in
58. ## physics

The combined mass of a man and a chair suspended at the midpoint of a rope of negligible mass is 50 kilograms. The rope is connected to a weight of 4360 newtons hanging from a massless frictionless pulley. Find the angle.
59. ## Physics Classical Mechanics

A pulley of mass mp , radius R , and moment of inertia about the center of mass Ic=12mpR2 , is suspended from a ceiling. The pulley rotates about a frictionless axle. An inextensible string of negligible mass is wrapped around the pulley and it does not
60. ## KINEMATICS (PHY)

A pulley of mass mp , radius R , and moment of inertia about the center of mass Ic=12mpR2 , is suspended from a ceiling. The pulley rotates about a frictionless axle. An inextensible string of negligible mass is wrapped around the pulley and it does not
61. ## Physics

The weight of the block at rest on a frictionless table is 305 N. This block is attched by a string to another mass that hangs off a frictionless pulley. And the weight of the hanging block is 125 N. Ignoring all frictional effects and assuming the pulley
62. ## Physics

Suppose you have a system of two masses strung over a pulley. Mass 1 (6.5 kg) hangs on the right side of the pulley suspended over the ground at height 1 m. Mass 2 (2.2 kg) hangs over the left side of the pulley and rests on the ground. The pulley is a
63. ## Physics

Instead of the frictionless wheel in problem 7, imagine that the rope is tied to a frictionless pulley with radius R but an unknown moment of inertia. If the pulley always has half as much kinetic energy as the block, what must be its moment of inertia?
64. ## Physics

Balance of vertical forces problem. Three balanced forces pull on a ring that is centered over a force table. Two forces F1 and F2 are due to weights hanging from pulleys. A frictionless pulley changes the direction of a force without altering its
65. ## college physics

Two blocks of mass m1 = 3.00 kg and m2 = 7.50 kg are connected by a mass less string that passes over a frictionless pulley. The inclines are frictionless. So this is like a triangle with a pulley at the top and both blocks resting at either side of the
66. ## physics

ojee a benz mechanic tries to remove an engine from a car by attaching a chain to it from a point directly overhead and then pulling sideways with horizontal force F.if the engine has mass 180 kg.what is the tension in the chain when it makes an angle
67. ## physics

ojee a benz mechanic tries to remove an engine from a car by attaching a chain to it from a point directly overhead and then pulling sideways with horizontal force F.if the engine has mass 180 kg.what is the tension in the chain when it makes an angle
68. ## physics

Acceleration of a Mass in a Pulley System Block 1 of mass m1 slides on a frictionless plane inclined at angle θ with respect to the horizontal. One end of a massless inextensible string is attached to block 1. The string is wound around a frictionless
69. ## physics

A pulley rotating in the counterclockwise direction is attached to a mass suspended from a string. The mass causes the pulley's angular velocity to decrease with a constant angular acceleration α = -2.2 rad/s2. If the pulley's initial angular velocity is
70. ## Physics

A mechanic uses a chain and block to lift a 875-kg engine 4.00 m to the top of the garage. The downward force in the chain over the 4.00 m distance is 5.00 x 10^4 N. A) Calculate the work done in raising the motor B) How much useful work was done? C) What
71. ## physics

Two masses m and 2m are attached with each other by a rope passing over a frictionless and massless pulley. If the pulley is accelerated upwards with an acceleration ‘a’, what is the value of T?
72. ## pulley and rotation

Two masses, mA = 35.0 kg and mB = 42.0 kg, are connected by a rope that hangs over a pulley (as in the figure). The pulley is a uniform cylinder of radius 0.50 m and mass 4.8 kg. Initially mA is on the ground and mB rests 2.5 m above the ground. If the
73. ## Physics

A beam, B1, of mass M1 = 0.6887 kg and length L1=1 m is pivoted about its lowest point at P1. A second beam, B2, of mass M2=0.200 kg and length L2=0.200m is suspended (pivoted) from B1 at a point P2, which is a horizontal distance d=0.550, from P1. To keep
74. ## Physics

A 29 kg sign is supported by a vertical chain at each end. A strong wind blows and the chains make a 30 degree angle with the vertical. What force does each chain exert? Thank you for answering~
75. ## physics

In which of these cases is a youngster doing work in the school gymnasium? 1. climbing up a rope 2. hanging motionless from a chinning bar. 3. lifting a set of weights from the floor to overhead WHICH ONE & WHY? A BRIEF EXPLANATION WOULD BE NICE. thank you
76. ## Physics

Four balls are suspended by cords. The longer, top cord loops over a frictionless pulley and pulls with a force of magnitude 95 N on the wall to which it is attached. The tensions in the shorter cords are T1 = 56.0 N (between ball A & B), T2 = 46.7 N
77. ## physics

an arrangement of four disks are suspended by cords. The longer, top cord loops over a frictionless pulley and pulls with a force of magnitude 81.2 N on the wall to which it is attached. The tensions in the shorter cords are T1 = 62.7 N, T2 = 33.6 N, and
78. ## Physics

A pulley is holding two masses-0.5 kg and 2.0 kg. The system is in static equilibrium; the pulley is frictionless; the string is massless. What is the tension of the string holding the pulley?
79. ## Physics

A string passes over a frictionless, massless pulley attached to the ceiling. A mass m1=15.0 kg hangs from one end of this string, and a second massless, frictionless pulley hangs from the other end of the string. A second string passes over the second
80. ## Physics

Consider the system shown in the figure with m1 = 25.00 kg, m2 = 10.20 kg, R = 0.18 m, and the mass of the uniform pulley M = 5.00 kg. Object m2 is resting on the floor, and object m1 is 4.00 m above the floor when it is released from rest. The pulley axis
81. ## physics

The figure shows an arrangement in which four disks are suspended by cords. The longer, top cord loops over a frictionless pulley and pulls with a force of magnitude 82.6 N on the wall to which it is attached. The tensions in the shorter cords are T1 =
82. ## Physics

The figure shows an arrangement in which four disks are suspended by cords. The longer, top cord loops over a frictionless pulley and pulls with a force of magnitude 93.4 N on the wall to which it is attached. The tensions in the shorter cords are T1 =
83. ## physics

three 80 gram weights are suspended at 32 cm 43 cm and 76 cm of a uniform meter stick. if the stick is made to rotate at its midpoint where must the 4th 80 gram weight be suspended to attain equilibrium? please and thank you
84. ## Physics

Two masses are held while suspended on a frictionless pulley.Their masses are 0.250 kg and 0.200 kg. a. Compute for the acceleration of the masses once they are released? b.Find the tension on the string m1 accelerates upward and m2 downward Let a be the
85. ## physics

block 1 has mass m1 = 480 g, block 2 has mass m2 = 540 g, and the pulley is on a frictionless horizontal axle and has radius R = 5.2 cm. When released from rest, block 2 falls 76 cm in 5.2 s (without the cord slipping on the pulley). What is the pulley's
86. ## physics

block 1 has mass m1 = 480 g, block 2 has mass m2 = 540 g, and the pulley is on a frictionless horizontal axle and has radius R = 5.2 cm. When released from rest, block 2 falls 76 cm in 5.2 s (without the cord slipping on the pulley). What is the pulley's
87. ## Physics helppp

The figure below shows an arrangement in which four disks are suspended by cords. The longer, top cord loops over a frictionless pulley and pulls with a force of magnitude 80 N on the wall to which it is attached. The tensions in the shorter cords are T1 =
88. ## Math

An apothecary has a set of five weights for use in the pans of his balance. By proper selection of weights, he is able to measure every multiple of 0.5 g, from 0.5 g up to a total of the five weights together. If the arrangement of weights is such that the
89. ## Physics

A special pulley has two discs with radii R1 = .8 m and R2 = .35 m. A rope from the R2 disc connects the pulley to a wall and a rope from the R1 disc connects the pulley to a hanging mass. The axle is frictionless. The total mass of the pulley is 15 kg. a.
90. ## physics

Three balanced forces pull on a ring that is centered over a force table. Two forces F1 and F2 are due to weights hanging from pulleys. A frictionless pulley changes the direction of a force without altering its magnitude. The third force F3 is applied by
91. ## Physics

Two masses, m1=3kg and m2=2kg, are suspended with a massless rope over a pulley of mass M = 10kg. The pulley turns without friction and may be modeled as a uniform disk of radius R=.1m. You may neglect the size of the masses. The rope does not slip on the
92. ## physics

Spring scale A is attached to the floor and a rope runs vertically upward, loops over the pulley, and runs down on the other side to a 99 N weight as shown (in original problem). Scale B is attached to the ceiling and the pulley is hung below it. What are
93. ## Physics

A uniform chain of total mass m is laid out straight on a frictionless table and held stationary so that one-quarter of its length, L = 1.79 m, is hanging vertically over the edge of the table. The chain is then released. Determine the speed of the chain
94. ## mechanics 12

A 1.8 kg breadbox on a frictionless incline of angle θ = 37° is connected, by a cord that runs over a pulley, to a light spring of spring constant k = 120 N/m, as shown in the figure below. The box is released from rest when the spring is unstretched.

Two masses, mA = 35.0 kg and mB = 42.0 kg, are connected by a rope that hangs over a pulley (as in the figure). The pulley is a uniform cylinder of radius 0.50 m and mass 4.8 kg. Initially mA is on the ground and mB rests 2.5 m above the ground. If the
96. ## Physics

an 80 kg physics student is riding the cajun cliffhanger. this ride had a diameter of 8.0m (u:0.06)the ride produces enough centripetal force to suspend a student. 1.what is the force of friction to keep the student suspended? 2.what normal force is
97. ## physics

a fis is suspended from a 6m uniform beam supported by a cable and attached by a pivot to the ground. the beam has a mass of 20 kg and the cable can withstand a maximum tension of 10000 N. find masimum wright of a fish that can be supported by this system
98. ## Re: Pig question (Physics)

Thank you, I think I get it now. I have one more question: a kimchi container of mass 1=3.0 kg connected to a block of mass m2 by a cord looped around a frictionless pulley. The cord and pulley have negligible mass. When the container is released from
99. ## Physics

Three objects are connceted by a massless wires over a frictionless pulley. The right side of the pulley wire is connected to a 15kg block and right below that is a 10kg block on the bottom of the wire. The tension in the wire connecting the 10kg and 15kg
100. ## physics

Two blocks connected by a cord passing over a small, frictionless pulley rest on frictionless planes: a) What is the acceleration of the blocks? b) What is the tension in the cord? c) Which way will the system move when the blocks are released from rest?