A 1.0 kg object is given a push along a horizontal surface. If the velocity of the object when it is released is 0.50 m/s west, and the object slides 0.25m before coming to a stop, what is the magnitude

44,436 results
  1. Physics

    A 50 Kg box rests on a horizontal surface. The coefficient of Static friction between the box and surface is 0.30. The coeffient of Kinetic friction is 0.20. What is the frictional force on the box if a 140 N horizontal push is applied to it. If a 175 N

  2. physics

    An object rolls off a tabletop with a horizontal velocity v0x = 2.5 m/s. The table is at a height y0 = 0.55 m, above the floor. Use a coordinate system with its origin on the floor directly beneath the point where the object rolls off the table, its

  3. physic

    An object of mass m is at rest at the top of a smooth slope of height h and length L. The coefficient of kinetic friction between the object and the surface, μk, is small enough that the object will slide down the slope if given a very small push to get

  4. physics

    A 0.40kg object is attached to a spring constant 160N/m so that the object is allowed to move on a horizontal frictionless surface. The object is released from rest when the sprin g is compressed 0.15m find: a) the force on the object and b) its

  5. physic

    A stationary 2.0 kg object is located on a table near the surface of the earth. The coefficient static friction between the surface is .80 and the coefficient of the kinetic friction is 0.65. A horizontal force of 5N is applied to the object. Determine the

  6. physics

    A horizontal force of 100 N is required to push a piece of furniture across a floor at a constant velocity. what is the net force acting on the furniture? How much is the friction force that acts on the sliding furniture? How much friction acts on the

  7. Physics

    A horizontal force of 150 N is used to push a 33.0 kg packing crate a distance of 6.65 m on a rough horizontal surface. If the crate moves at constant speed and the work done is 997.5 joules. What is the coefficient of kinetic between the crate and the

  8. Sam E

    Let v(t)=t^2−3t be the velocity, in feet per second, of an object at time t , in seconds. (c) What is the meaning of the quantity v(4)? Select all that apply if more than one statement is correct. A. In how many seconds will the object have moved 4 ft.

  9. Math Help

    Let v(t)=t^2−3t be the velocity, in feet per second, of an object at time t , in seconds. (c) What is the meaning of the quantity v(4)? Select all that apply if more than one statement is correct. A. In how many seconds will the object have moved 4 ft.

  10. Physics

    A horizontal force of 150 N is used to push a 32.5-kg packing crate a distance of 4.95 m on a rough horizontal surface. If the crate moves at constant speed, find each of the following. (a) the work done by the 150-N force? (b) the coefficient of kinetic

  11. physics

    A horizontal force of 150 N is used to push a 45.0-kg packing crate a distance of 5.75 m on a rough horizontal surface. If the crate moves at constant speed, find each of the following. (a) the work done by the 150-N force (b) the coefficient of kinetic

  12. Physics help Rolling Motion!!

    A spherically symmetric object with radius R= 0.51m and mass of M= 3.5kg rolls without slipping accross a horizontal surface with velocity of V = 4.4m/s. It then rolls up an incline with an angle of 30 degrees and comes to rest a distance d = 2.2m up the

  13. Physics

    A horizontal force of 150 N is used to push a 43.5 kg packing crate a distance of 5.30 m on a rough horizontal surface. If the crate moves at constant speed, find each of the following. (a) the work done by the 150 N force (b) the coefficient of kinetic

  14. physics

    A ball is launched at a velocity of 20 m/s in a direction making an angle of 25° upward with the horizontal. i) calculate maximum height reached by the object ii) Calculate the total flight time of the object iii) Calculate the horizontal range (maximum

  15. physics

    a force of 200 N is exerted at an angle 30 degrees with respect to the horizontal on an object whose mass is 30kg. the coefficient of friction between the object and the surface is the 0.2.(a)what is the frictional force?(B) what is the acceleration of the

  16. Physics Help Please!!!! Urgent!!

    1) A 10 kg lead brick rests on a wooden table. if a force of 46N is required to slide the brick across the table at a constant velocity, what is the coefficient of friction? 2) A horizontal force of 100N is applied to a 200 kg refrigerator sitting on a

  17. physics

    An object is thrown with velocity v from the edge of a cliff above level ground. Neglect air resistance. In order for the object to travel a maximum horizontal distance from the cliff before hitting the ground, the throw should be at an angle theta with

  18. physics

    A block weighing 8.3 N requires a force of 2.6 N to push it along at constant velocity. What is the coefficient of friction surface? A weight W is now placed on the block and 8.2 is needed to push them both at constant velocity. What is the weight W of the

  19. physics

    A 1.5-kg playground ball is moving with a velocity of 3.0 m/s directed 30 ° below thehorizontal just before it strikes a horizontal surface. The ball leaves this surface 0.50 slater with a velocity of 2.0 m/s directed 60 ° above the horizontal. What is

  20. physics

    if an object is pushed along a rough horizontal surface and moves at a constant velocity, then...

  21. Physics

    A 2.4 kg object attached to a horizontal string moves with constant speed in a circle of radius R on a frictionless horizontal surface. The kinetic energy of the object is 95 J and the tension in the string is 315 N. Find R.

  22. physics

    A 1.0 kg object is given a push along a horizontal surface. If the velocity of the object when it is released is 0.50 m/s west, and the object slides 0.25m before coming to a stop, what is the magnitude of the force of friction?

  23. physics - i need A.S.A.P

    An object of mass 1.5 kg is placed on a rough horizontal surface, as shown in Figure 1. Force F acts on the object. When the magnitude of F is 10 N, the object just begins to slide. Determine the coefficient of static friction between the object and the

  24. Science

    An object is moving due east. You push the object. Work is being done at all times when you push...

  25. Physics HELP!!

    two horizontal forces F1 and F2, acting on an object of mass 1.11kg. The magnitude of F1 is 27.56N. The object moves strictly along the horizontal x-axis, which we choose as positive to the right. Find the magnitude of F2 if the object has a horizontal

  26. physics

    A popular pastime is to see who can push an object closest to the edge of a table without its going over. You push a 130 g object and release it 2.00 m from the table edge. Unfortunately, you push a little too hard. The object slides across, sails off the

  27. 2 masses, pulley on a frictionless incline

    an object of mass m1= 311 g on an inclined surface. The angle of the inclined surface is θ = 40o with the horizontal. The object m1 is connected to a second object of mass m2 = 355 g on the adjacent horizontal surface. Further, an external force of

  28. Physics

    As an object slides across a rough horizontal surface, what happens to the object's gravitional potential energy with respect to the surface and speed? Would't potential energy decrease at rest?

  29. physics

    A popular pastime is to see who can push an object closest to the edge of a table without its going off. You push the 100 g object and release it 2.90 from the table edge. Unfortunately, you push a little too hard. The object slides across, sails off the

  30. physics

    A 58.2 g object is attached to a horizontal spring with a spring constant of 11.8 N/m and released from rest with an amplitude of 24.4 cm. What is the velocity of the object when it is halfway to the equilibrium position if the surface is frictionless?

  31. Physics

    Imagine a right-angle triangle with angle θ = 40o on the left. The serves as an increasing slope. On the slope is an object of mass m1= 340 g on an inclined surface. The angle of the inclined surface is θ = 40o with the horizontal. The object m1 is

  32. Physics

    A constant horizontal force of 275 N was applied to push a crate of mass m = 92.0 kg at a speed of v = 0.850 m/s, which encounters a rough horizontal surface of length, l = 0.65 m as in Figure 2 below. If the coefficient of kinetic friction between the

  33. Physics

    I have learnt that when we push an object on a horizontal plane with a certain angle, we are increasing its normal reaction and therefore friction increases. Whereas if we pull it, friction decreases. Is that true? Yes, there is more friction if you push

  34. physics

    when you do work to push an object horizonatally on a frictionless surface what energey change is taking place?

  35. Projectile motion

    An object is thrown with projectile motion on a horizontal surface with the initial velocity Vo= 24 m/s in an angle=15°. Determine the horizontal distance traveled by the projectile (in meters).

  36. physics

    A 4.10 kg object on a horizontal frictionless surface is attached to a spring with spring constant 840 N/m. The object is displaced from equilibrium 50.0 cm horizontally (in the + direction) and given an initial velocity of 9.9 m/s back toward the

  37. PHYSICS

    A spherically symmetric object with radius of .7m and mass of 1.6kg rolls without slipping accross a horizontal surface with velocity of 1.7m/s. It then rolls up an invline with an angle of 28degrees and comes to rest a distance d of 2.3m up the incline,

  38. physics

    An object with a mass of 3.4 kg is originally at rest on a horizontal, frictionless surface frictionless which is at the top of a frictionless incline with a length of 6 meters which is inclined at 28.9 degrees. Someone's hand applies a force to the object

  39. Physics

    A horizontal force of 150 N is used to push a 40.5-kg packing crate a distance of 5.05 m on a rough horizontal surface. If the crate moves at constant speed, find each of the following. (a) the work done by the 150-N force (b) the coefficient of kinetic

  40. science

    a man pushes a lawnmower of mass 50kg at a constant velocity over a horizontal lawn.he exerts a push of 200n on the handle a t angle of 60 to the horizontal..Dertemime the vertical componet of this force and determine the horizontal component of this force

  41. Physics

    Whenever you push an object across a frictional surface, it starts out taking a lot of force to push to get the object moving. However, once the object starts moving, it is much easier to keep it moving. What does this tell you about one of the main

  42. physics

    A net horizontal force F =A +Bt^3 acts on a 2kg object, where A = 5N and B = 2N/s3. What is the horizontal velocity of this object 4.0 seconds after it starts from rest? F=ma=5+2t^3 a=2.5+t^3 V=2.5t+(1/4)(t^3) therefore, at t=4, V=74m/s Is this correct?

  43. Physics

    An object is projected at an angle of 53.1degrees above the horizontal at a speed of 50m/s. Sometime later it enters a narrow tube positioned at an angle of 45degrees to the vertical. Determine: a) The initial horizontal and vertical components of

  44. Physics

    An object of mass M = 649 g is pushed at a constant speed up a frictionless inclined surface which forms an angle θ = 50o with the horizontal. What is the magnitude of the force that is exerted by the inclined surface on the object?

  45. application of differential equation

    An object of mass 100g is thrown vertically upward from a point 60cm above the earths surface with an initial velocity of 150cm/sec. It rises briefly and then falls vertically to the earth, all of which time it is acted on by air resistance that is

  46. Physics

    An object of mass M rests on a horizontal table and is connected to a cable that passes over a pulley and is then fastened to a hanging object with mass m. There is static friction between the horizontal surface and mass M. The coefficient of static

  47. Physics-Conversion of Energy

    Can someone help me solve this problem with all of the steps? This is from an online homework assignment but it doesnt have anything like it in the practice example. It asks to NOT use Newton's Law. An object is on Earth with a mass of 10 kg at the top of

  48. Physics

    Figure Ex5.7 shows the velocity graph of a 5.0 kg box as it pushed to the right (->) along a horizontal surface. Assume that a 12 newton friction force acts on the box to the left () acting push on this object at the given times? t=2 N=? t=7 N=?

  49. science

    Words to use: Accelerate - Sliding - Brake - Friction - Slipping - Inertia Velocity - Wheel - Strength - Static - Terminal velocity Questions 1. An object will ____?____ when the net force is not zero. 2. ____?____ will never speed up an object. 3. The

  50. physics

    A horizontal force of 142 N is used to push a 47.0 kg packing crate a distance of 6.00 m on a rough horizontal surface. The acceleration of gravity is 9.81 m/s2 . If the crate moves with constant velocity, calculate a) the work done by the force. Answer in

  51. Physics HELP!! pleasee

    an object on an inclined ramp of mass 1.39kg. The angle of the inclined surface is 29deg with the horizontal. The object on the ramp is connected to a second object of mass 2.17kg on a horizontal surface below an overhang that is formed by the inclined

  52. Physical science

    An object is on a horizontal surface,three force act horizontal on the object.3N to the left,12N to the right,in to the left.at the same time,another three force act vertically on the object,4N upwards,10N downward,2N downwards determine the resultant

  53. Physical science

    An object is on a horizontal surface,three force act horizontal on the object.3N to the left,12N to the right,in to the left.at the same time,another three force act vertically on the object,4N upwards,10N downward,2N downwards determine the resultant

  54. physics

    An object rolls off a tabletop with a horizontal velocity v0x = 2.5 m/s. The table is at a height y0 = 0.55 m, above the floor. Use a coordinate system with its origin on the floor directly beneath the point where the object rolls off the table, its

  55. physics

    In the system shown in the figure below, a horizontal force Fvecx acts on the 7.00 kg object (m1). The horizontal surface is frictionless. (a) For what values of Fx does the 1.00 kg object (m2) accelerate upward?

  56. Physics

    A block weighing 6.8 N requires a force of 2.5 N to push it along at constant velocity. What is the coefficient of friction for the surface? A weight W is now placed on the block and 4.6 N is needed to push them both at constant velocity. What is the

  57. math

    An object of mass 100g is thrown vertically upward from a point 60cm above the earths surface with an initial velocity of 150cm/sec. It rises briefly and then falls vertically to the earth, all of which time it is acted on by air resistance that is

  58. physics

    A 8 kg object is pulled along a horizontal surface at a constant speed by a 30 N force acting 60 degrees above the horizontal. How much work is done by the force as the object moves 7 m?

  59. physics

    A 1.90-kg object is attached to a spring and placed on frictionless, horizontal surface. A horizontal force of 14.0 N is required to hold the object at rest when it is pulled 0.200 m from its equilibrium position (the origin of the x axis). The object is

  60. PHYSICS

    A 0.49 kg object is attached to a spring with a spring constant 167 N/m so that the object is allowed to move on a horizontal frictionless surface. The object is released from rest when the spring is compressed 0.12 m. Find the force on the object.

  61. Physics

    An object rests on an inclined surface thanks to the presence of static friction forces between the object and the surface. The magnitude of the friction force that prevents the object from sliding is found to be 30 N. Now, the angle that the surface makes

  62. Physics

    A horizontal force of 150 N is used to push a 43.5 kg packing crate a distance of 5.30 m on a rough horizontal surface. If the crate moves at constant speed, find each of the following. (a) the work done by the 150 N force (b) the coefficient of kinetic

  63. Physics

    A horizontal force of 150 N is used to push a 32.5-kg packing crate a distance of 4.95 m on a rough horizontal surface. If the crate moves at constant speed, find each of the following. (a) the work done by the 150-N force? (b) the coefficient of kinetic

  64. physic

    A stationary 2.0 kg object is located on a table near the surface of the earth. The coefficient static friction between the surface is .80 and the coefficient of the kinetic friction is 0.65. A horizontal force of 5N is applied to the object. Determine the

  65. PHYSICS

    An object is originally moving at 13 m/s at the top of a frictionless, quarter-circular ramp with a radius of R = 13 meters. It then travels on a frictionless horizontal surface, around a frictionless loop of radius r = 2 meters, across another horizontal,

  66. b.c.m school

    A 5.0-kg object moves on a horizontal frictionless surface under the influence of a spring with force constant 10 3 N/m. The object is displaced 50 cm and given an initial velocity of 10 m/s back toward the equilibrium position. (a) What is the velocity of

  67. AP Physics

    A horizontal force of 160 N is used to push a 49.0 kg packing crate a distance of 7.00 m on a rough horizontal surface. The acceleration of gravity is 9.81 m/s If the crate moves with constant velocity, calculate the coefficient of kinetic friction.

  68. Physics

    1. While exploring a cave, a spelunker starts at the entrance and moves the following distances in horizontal plane. She goes 50.0 m West, 150 m North, 80 m 60 ° S of E. a) Draw the figure applying polygon method. (scale 40 m: 1 cm) b) Find her resultant

  69. Physics

    a)An object on a frictionless surface forms an angle of 27° with the horizontal. The object is pushed by a horizontal external force such that it moves with a constant speed. If the mass of the object is 72.3 kg, calculate the magnitude of the external

  70. Physics

    An object of mass m1= 203 g is on an inclined surface, that is increasing. The angle of the inclined surface is θ = 40o with the horizontal. The object m1 is connected to a second object of mass m2 = 598 g on the adjacent horizontal surface via a pulley

  71. Physics

    An object with a mass of 5 kg moves at a constant velocity when it is pulled by a horizontal force of 5 N on a level surface. What is the acceleration of the object if the object is pulled with a force of 25 N?

  72. Physics

    an object of mass m1= 311 g on an inclined surface. The angle of the inclined surface is θ = 40o with the horizontal. The object m1 is connected to a second object of mass m2 = 355 g on the adjacent horizontal surface. Further, an external force of

  73. physics

    A horizontal force of 142 N is used to push a 47.0 kg packing crate a distance of 6.00 m on a rough horizontal surface. The acceleration of gravity is 9.81 m/s2 . If the crate moves with constant velocity, calculate a) the work done by the force. Answer in

  74. physics

    Two objects move on a horizontal frictionless surface along the same line in the same direction which we shall refer to as foward direction. The trailing object of mass 2.0kg has a velocity of 15m/s foward. The leading object of mass 3.2 kg has avelocity

  75. physics

    Two objects move on a horizontal frictionless surface along the same line in the same direction which we shall refer to as foward direction. The trailing object of mass 2.0kg has a velocity of 15m/s foward. The leading object of mass 3.2 kg has avelocity

  76. mechanical engineering

    An object is launched from a height 100 m above horizontal ground with a velocity of 30m/s and an angle of 20o above the horizontal. a) Determine the Object’s horizontal displacement upon impact. b) Maximum vertical displacement at 2seconds after lunched

  77. physics ..PLEASE HELP ASSIGN DUE SOON :(

    an object on an inclined ramp of mass 1.39kg. The angle of the inclined surface is 29deg with the horizontal. The object on the ramp is connected to a second object of mass 2.17kg on a horizontal surface below an overhang that is formed by the inclined

  78. Physics

    If a horizontal force of 200 N is applied to a 430 N object, causing it to accelerate across a horizontal surface, and the net force on the object is 72 N, what is the value of frictional force between the obejct and the surface?

  79. physics

    You push an 20-kg crate up an inclin with an angle of 35 degrees to the horizontal with a force of 260-N. If the crate is moving at a constant velocity: 1. what is the component of the crate's weight parallel to the surface? 2. WHat is the sum of the

  80. Physics

    An object is launched at an angle of 24 degrees above the horizontal at a velocity of 33.7 m/s from the top of a building which is 110.8 meters above the ground. When the object lands on the ground, what is the horizontal displacement from the base of the

  81. Physics

    A 25.2-kg object is moving rightward across a horizontal surface with a speed of 14.3 m/s The coefficient of friction between the object and the surface is 0.490.

  82. physics

    a 20newton object Is pulled along a horizontal surface at a constant velocity by a 30N force. What is the coefficient of friction

  83. Physics

    Imagine a right-angle triangle with angle θ = 40o on the left. The serves as an increasing slope. On the slope is an object of mass m1= 340 g on an inclined surface. The angle of the inclined surface is θ = 40o with the horizontal. The object m1 is

  84. Physics

    Imagine a right-angle triangle with angle θ = 40o on the left. The serves as an increasing slope. On the slope is an object of mass m1= 340 g on an inclined surface. The angle of the inclined surface is θ = 40o with the horizontal. The object m1 is

  85. Physics

    An object rests on an inclined surface thanks to the presence of static friction forces between the object and the surface. The magnitude of the friction force that prevents the object from sliding is found to be 30 N. Now, the angle that the surface makes

  86. physics

    suppose the you push with a 40-N horizontal force on a 4-kg mass resting on a horizontal surface against a horizontal friction force of 24N. show that the acceleration is 4 m/s2

  87. Physics

    Use the Work-Energy Theorem to show that an object with initial velocity vo will travel a distance d across a rough horizontal surface before stopping, where d = vo2/(2mKg).

  88. physics

    An object of mass M = 911 g is pushed at a constant speed up a frictionless inclined surface which forms an angle θ = 50o with the horizontal as shown in the figure below. What is the magnitude of the force that is exerted by the inclined surface on the

  89. Physics

    An object of mass M = 1,338 g is pushed at a constant speed up a frictionless inclined surface which forms an angle θ = 50 degrees with the horizontal. Incline is increasing. What is the magnitude of the force that is exerted by the inclined surface on

  90. Physics

    An object of mass M = 1,338 g is pushed at a constant speed up a frictionless inclined surface which forms an angle θ = 50 degrees with the horizontal. Incline is increasing. What is the magnitude of the force that is exerted by the inclined surface on

  91. Physics

    Use the Work-Energy Theorem to show that an object with initial velocity vo will travel a distance d across a rough horizontal surface before stopping, where d = vo2/(2mKg). Help ASAP please!!

  92. physics

    2. œ A horizontal force of 100 N is required to push a piece of furniture across a floor at a constant velocity. (a) What is the net force acting on the furniture? (b) How much is the friction force that acts on the sliding furniture? (c) How much

  93. physics

    An object of mass 1,5 kg,is pulled along a rough horizontal surface by a horizontal force F.calculate the value of F if the force of friction is 1,3 N and the object accelerates at 2m.s-2

  94. Physics Rolling Motion!!

    A spherically symmetric object with radius R= 0.51m and mass of M= 3.5kg rolls without slipping accross a horizontal surface with velocity of V = 4.4m/s. It then rolls up an incline with an angle of 30 degrees and comes to rest a distance d = 2.2m up the

  95. Physics

    A spring has a a constant of 650 N/m. How far must it be compressed to push a 4kg object on a friction-less surface to 3 m/s?

  96. Physics

    An object is observed for a 5 second interval. During this time, the objects velocity increases from 2 m/s to a final velocity and the object travels 75 m. The acceleration of the object is constant. Given this information, which of the following

  97. application of differential equation

    somebody please help me find the solution totally lost.... An object of mass 100g is thrown vertically upward from a point 60cm above the earths surface with an initial velocity of 150cm/sec. It rises briefly and then falls vertically to the earth, all of

  98. Physics

    A horizontal force of 150 N is used to push a 42.0-kg packing crate a distance of 6.60 m on a rough horizontal surface. If the crate moves at constant speed, find each of the following.

  99. calculus

    What would be the force required to push a 100 lb. object along a ramp that is inclined 10 degrees with the horizontal?

  100. Physics

    I need help with some question. Please correct me if I naswered these wrong. 1. Assuming two objects are moving with the same velocity but one has a mass of 90 kg and the other has a mass of 45 kg, which object has the greater momentum? Explain. The object

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20