Ask questions and get helpful responses.

A) A 600 kg steel beam is supported by the two ropes shown in (Figure 1). Calculate the tension in the rope. Express your answer to two significant figures and include the appropriate units. B) The rope can support a

24,653 results
  1. Physics

    A) A 600 kg steel beam is supported by the two ropes shown in (Figure 1). Calculate the tension in the rope. Express your answer to two significant figures and include the appropriate units. B) The rope can support a maximum tension of 3200 N . Is this
  2. physics

    A uniform 8 m 1500 kg beam is hinged to a wall and supported by a thin cable attached 2 m from the free end of the beam as shown in the figure. The beam is supported at an angle of 30 degrees above the horizontal. a) free diagram b) find the tension in the
  3. physics

    a person whos mass is 102 kg stands on a beam supported by two ropes , A and B, he is standing on one foot to help you solve this problem.what is the tension of the two ropes? the entire beam itself is 4.56 m and the person is stading from left to right in
  4. physics

    A 800 kg steel beam is supported by two ropes. Each rope has a maximum sustained tension of 6600 N. One of the ropes is 20 degrees left of the horizontal(normal) while the other rope is 30 right of the horizontal(normal). What is the tension in each rope?
  5. physics

    Consider a beam as shown in the figure that is 2 m long and supported by a rope. It is pressed against the wall. There is no friction between the wall and the beam. If the beam has a mass of 2 kg and a sign with a mass of 10 kg is hung off of the end of
  6. physics

    a 10-m uniform beam of weight 100N is supported by two ropes at the ends. If a 400N erson sits at 2.0 m from the left end of the beam, what is the tension in the right rope?
  7. Physics Classical Mechanics

    A uniform steel beam of mass m1= 300.0 kg is held up by a steel cable that is connected to the beam a distance L= 5.0 m from the wall, at an angle θ= 40.0∘ as shown in the sketch. The beam is bolted to the wall with an unknown force F⃗ exerted by the
  8. statics and strengths

    A cantilever beam member made from steel with hollow circular cross section experiences an axial load of 300 KN (F1), and a vertical load of 200 kN (F2) as shown in the following figure. The beam is 300mm long and fixed on one end.
  9. physics

    The three ropes in the figure are tied to a small, very light ring. Two of the ropes are anchored to the walls at right angles, and the third rope pulls as shown. What are T1 and T2, the magnitudes of the tension forces in the first two ropes?
  10. PHYSICS

    The three ropes in the figure are tied to a small, very light ring. Two of the ropes are anchored to walls at right angles, and the third rope pulls as shown, with T3 = 90 N and θ = 35°. What are T1 and T2, the magnitudes of the tension forces in the
  11. physics

    a 10m uniform beam of weight 100 N is supported by two ropes at the ends. if a 400 N person sits at 2m from the left end of the beam, what is the tension in the left rope?
  12. Physics! plese help

    A 1320-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the tension in the wire and the
  13. Physics

    A 1.500m long uniform beam of mass 30.00 kg is supported by a wire as shown in the figure. The beam makes an angle of 10.00 degrees with the horizontal and the wire makes and angle of 30.00 degrees with the beam. A 50.00 kg mass, m, is attached to the end
  14. physics

    A 43 kg, 5.3-{\rm m}-long beam is supported, but not attached to, the two posts in the figure . A 23 kg boy starts walking along the beam.How close can he get to the right end of the beam without it falling over?
  15. Phyics

    A 1390-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the tension in the wire and the
  16. physics

    A basket weighing 0.3kg is suspended from two ropes which are tied to a horizontal beam. The rope on the left is at an angle of 63° and the rope on the right is at an angle of 32° with respect to the beam. What mass of rocks could be placed in the bucket
  17. Physics

    A uniform beam weighing Wa=1200 N is 3.50 m long and is suspended horizontally by two vertical wires at its ends, as shown in the figure below. A small but dense weight with WL = 550 N is placed on the beam 2.00m from one end, as shown in the figure. a)
  18. statics

    A cantilever beam member made from steel with hollow circular cross section experiences an axial load of 300 KN (F1), and a vertical load of 200 kN (F2) as shown in the following figure. The outside diameter of the beam is 50mm and the uniform wall
  19. Physics

    Beam supported by a rope that can rotate about a hinge. The beam is supported by a rope attached 1.00 meter from the end of the beam. The beam has a mass of 10.0 kg and is 6.00 meters long. The rope makes a 60degree angle. What is the tension in the rope?
  20. phyics

    A 1390-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the tension in the wire and the
  21. mechanics of materials

    A steel beam with a rectangular cross section is bent to form an arc of a circle of radius 6 m. Calculate the maximum stress in the beam given that the depth of the beam is 6 mm and the Young's modulusfor steel is 210 MPa
  22. physics

    Calculate F_{\rm A} and F_{\rm B} for the beam shown in the figure . The downward forces represent the weights of machinery on the beam. Assume the beam is uniform and has a mass of 260 kg.
  23. physics

    The three ropes shown are tied to a small, very light ring that is stationary. Two of these ropes are anchored to walls at right angles with the tensions shown in the figure. What is the magnitude of the tension T3 in the third rope, if T1 = 48.8 N, T2 =
  24. physics

    The three ropes shown are tied to a small, very light ring that is stationary. Two of these ropes are anchored to walls at right angles with the tensions shown in the figure. What is the magnitude of the tension T3 in the third rope, if T1 = 48.8 N, T2 =
  25. physics

    a person whos mass is 102 kg stands on a beam supported by two ropes , A and B, he is standing on one foot to help you solve this problem.
  26. physics

    1.An elastic cord is 5.0m long and 1.0cm in diameter and acts as a spring with spring constant 70 N/m, what is the young's modulus for this material? 2.A heavy uniform beam of mass 8000 kg and length 2.0m is suspended at one end by a nylon rope of diameter
  27. Physics

    A uniform 34.5-kg beam of length = 4.95 m is supported by a vertical rope located d = 1.20 m from its left end as in the figure below. The right end of the beam is supported by a vertical column. a) Find the tension in the rope. b) Find the force the
  28. physics

    A hungry bear weighing 720 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see the figure below). The beam is uniform, weighs 200 N, and is 7.00 m long, and it is supported by a wire at an angle of θ =
  29. physics

    A bench seat is attached to a wall by hinges and supported from above by two ropes, as shown in the figure below. The seat weighs 139 N and is designed to support a person weighing up to 1300 N, sitting on the edge. How much tension must each rope be able
  30. physics

    the figure shows a uniform beam of weight 420 N and length 2.0 m suspended horizontally. On the left it is hinged to a wall, on the right it is supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap the cable
  31. physics

    the figure shows a uniform beam of weight 420 N and length 2.0 m suspended horizontally. On the left it is hinged to a wall, on the right it is supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap the cable
  32. physics

    I would tell you the steps I've taken so far but I have no idea where to even start. Any help is appreciated! Thanks! A uniform 33.5-kg beam of length = 4.15 m is supported by a vertical rope located d = 1.20 m from its left end as in the figure below. The
  33. Physics

    A sign weighing 500N is suspended at the end of a uniform 300N beam 5m in length, as shown. The beam is attatched to the wall with a hinge, and its other end is supported by a wire. What is the tension in the wire if it makes an an angle of 30o with the
  34. phys

    A 1155-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1915-N crate hangs from the far end of the beam. (a) Using the data shown in the drawing, find the magnitude of the tension in the wire. (b)
  35. physics

    A 1290-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1920-N crate hangs from the far end of the beam. the angle going from the top of the beam o the brick wall is at 50.0 degrees. the angle
  36. PHYSICS! -need help!-

    A gymnast with a mass of 52 kg stands on the end of a uniform balance beam as shown in the figure. The beam is 5.50 m long and has a mass of 250 kg. Each support is 0.54m from the end of the beam. What is the force on the beam due to support 2?
  37. physics

    A uniform horizontal beam with a length of 8m and a weight of 200N is attached to a wall by a pin connection. Its far end is supported by a cable that makes an angle of 53° with the beam (Figure below). If a 600N person stands 2m from the wall, find the
  38. physics

    A 1200-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1825-N crate hangs from the far end of the beam. (a) Using the data shown in the drawing, find the magnitude of the tension in the wire. (b)
  39. Physics

    A uniform beam of length 1.0 m and mass 16 kg is attached to a wall by a cable that makes an angle of 30 degrees with the end of the beam, as shown in the figure. The beam is free to pivot at the point where it attaches to the wall. What is the tension in
  40. physics

    two ropes attached to I beam (mass 500 kg). ropes make angles of 60 degrees with horizontal. Determine tension in each rope
  41. Physics

    A uniform beam of length L = 8.00 m and weight 3.80 102 N is carried by two workers, Sam and Joe, as shown in the figure below. Determine the force that each person exerts on the beam.
  42. Physics

    A uniform beam of length L = 8.00 m and weight 3.80 102 N is carried by two workers, Sam and Joe, as shown in the figure below. Determine the force that each person exerts on the beam.
  43. Physics

    A uniform beam of length L = 8.00 m and weight 3.80 102 N is carried by two workers, Sam and Joe, as shown in the figure below. Determine the force that each person exerts on the beam.
  44. Physics

    A uniform beam of length L = 8.00 m and weight 3.80 102 N is carried by two workers, Sam and Joe, as shown in the figure below. Determine the force that each person exerts on the beam.
  45. Physics

    An 80kg construction worker sits down 2.0 meters from the end of a 1450kg steel beam to eat his lunch. The beam is 6.0 m length total. A cable is supporting the beam and is rated at 15,000 N and is at a 30 degree angle to the beam. Should the worker be
  46. Math

    an arch of a bridge is made by bending a steel beam into the shape of a semi circle, if the span (diameter) of the arch is 20m, use the value 3.14 for π to find the length of the steel beam to the nearest meter
  47. physics

    An 76 kg construction worker sits down 2.0 m from the end of a 1440 kg steel beam to eat his lunch. The cable supporting the beam is rated at 15,000 N. Should the worker be worried? Determine the tension in the cable. i.imgur. com/Qfhkd. gif I can't figure
  48. physics

    A 1245-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1980-N crate hangs from the far end of the beam. (a) Using the data shown in the drawing, find the magnitude of the tension in the wire. N
  49. science

    A 155-N sign is supported by two ropes. One rope pulls up and to the right 26.5° above the horizontal with a tension T1, and the other rope pulls up and to the left 49.5° above the horizontal with a tension T2, as shown in the figure. Find the tensions
  50. physics

    A 115-N sign is supported by two ropes. One rope pulls up and to the right 26.5° above the horizontal with a tension T1, and the other rope pulls up and to the left 48.5° above the horizontal with a tension T2, as shown in the figure. Find the tensions
  51. Physics

    A gymnast with a mass of 54 kg stands on the end of a uniform balance beam as shown in the figure. The beam is 5.00 m long and has a mass of 250 kg. Each support is 0.54m from the end of the beam. What is the force on the beam due to support 2? 0
  52. physics

    a fis is suspended from a 6m uniform beam supported by a cable and attached by a pivot to the ground. the beam has a mass of 20 kg and the cable can withstand a maximum tension of 10000 N. find masimum wright of a fish that can be supported by this system
  53. Physics

    A uniform beam of length L = 7.80 m and weight 4.05 102 N is carried by two workers, Sam and Joe, as shown in the figure below. Determine the force that each person exerts on the beam. (Sam is 1m from one end of beam and joe is 2m from the opposite end.)
  54. AP Physics B

    system consists of a steal beam of mass M 􏰀 68.4 kg and length L 􏰀 1.84 m, with a 39.0-kg brass sphere attached at the right end of the rod, as shown below. BA a. Determine the moment of inertia of the system for rotation about an axis through the
  55. Physics

    A sign is supported by a cable and a horizontal beam.The beam has a length 1.4 m and a uniform mass of12 kg.a) If the cable is attached to the beam at a distance of 1.0 m from the hinge, what is the tension in the cable? (b) If the cable breaks, what is
  56. physics

    two ropes attached to I beam (mass 500 kg). ropes make angles of 60 degrees with horizontal. Determine tension in each rope. I ended up with 2829 N for each. Correct? or could you explain more?
  57. Physics

    In Figure 12-74, a uniform beam of length 11.7 m is supported by a horizontal cable and a hinge at angle θ = 52.7°. The tension in the cable is 444 N. What are (a) the x-component and (b) the y-component of the gravitational force on the beam? What are
  58. physics

    The 235-kg cart in the figure starts from rest and rolls with negligible friction. It is pulled by three ropes as shown. It moves 600. m horizontally. Find the final velocity of the cart. F1 = 500N at 0 degree F2 = 500N at 40.1 degree F3 = 400N at 30
  59. algebra

    the maximum load, v, that can be safely supported by horizontal beam varies jointly with the width of the beam ,w, and the square of its depth ,x, and inversely with the length of the beam ,a, write an equation for the constant of variation ,k, in terms of
  60. Newtonian Mechanics

    The 3.0 m long, 94 kg rigid beam in the following figure is supported at each end. An 70 kg student stands 2.0 m from support 1. How much upward force does the support 1 exert on the beam? How much upward force does the support 2 exert on the beam?
  61. physics

    A uniform horizontal beam 5.00 m long and weighting 2.88 102 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that makes an angle of 53.0° with the horizontal (Figure (a)). If a person
  62. physics

    Two ropes are attached to a skater as sketched in the figure below and exert forces on her as shown. Find the magnitude and direction of the total force exerted by the ropes on the skater if θ1 = 32.0° and θ2 = 53.0°. what is the magnitude and
  63. Physics

    A steel beam that is 7.00 m long weighs 352 N. It rests on two supports, 3.00 m apart, with equal amounts of the beam extending from each end. Suki, who weighs 595 N, stands on the beam in the center and then walks toward one end. How close to the end can
  64. physics

    A steel beam that is 6.00 m long weighs 332 N. It rests on two supports, 3.00 m apart, with equal amounts of the beam extending from each end. Suki, who weighs 550 N, stands on the beam in the center and then walks toward one end. How close to the end can
  65. AP Physics

    A floodlight with a mass of 50 kg is used to illuminate the parking lot in front of a library. The floodlight is supported at the end of a horizontal beam that is hinged to a vertical pole, as shown. A cable that makes an angle of 14◦ with the beam is
  66. Physics

    A mas of 100 Kg hangs from a cable secured to a steel pole and supported by another cable as shown below. Find the tension (T) in the support cable and the force (F) on the steel pole.
  67. Physics

    A 53m long steel beam is used to construct the roof of an arena. The beam is installed during the winter when the temperature is -5.0 C. By how much will the beam lengthen in the summer when the temperature reaches 40.0C?
  68. physics

    A uniform beam of length 7.60 m and weight 4.30 102 N is carried by two workers, Sam and Joe, as shown in the figure below. (a) Determine the forces that each person exerts on the beam. F_Sam = ___ N F_Joe = ___ N
  69. physics

    A heavy metal beam AB of mass 25Kg is supported at its ends.The beam carries a mass of 150Kg at a distance of 0.75m from end A.If the beam is 2m long, determine the thrust A and B.
  70. physics

    You decide to hang a new 10-kg flowerpot using the arrangement shown in the figure. (Figure 1) Can you use a slanted rope attached from the wall to the end of the beam if that rope breaks when the tension exceeds 170 N? The mass of the beam is not known
  71. physics

    10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  72. physics

    10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  73. physics

    10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  74. physics

    10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  75. physics

    ) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  76. physics

    10) Horizontal beam supported on both ends - square profil 100 × 100 × 5, length is 800 mm.It is bent by the force in the middle of the beam by 0.2 mm. To achieve approximately half of the value of deflection,you will use the beam:
  77. Physics

    Consider the figure above, where a rigid beam of negligible mass and 10 m long is supported by a cable attached to a spring. When NO block is hung from the beam, the length L (cable-spring) is equal to 5 m. Assume that immediately after block (weight of
  78. physics

    A uniform, horizontal beam is 5.00m long and has a weight of 200N. The beam is hinged at one end to a wall. A 600N weight is attached to the order end of the beam. The beam is supported by cable at the end opposite the wall. The cable attaches to the wall
  79. physics

    A 3.0-m-long rigid beam with a mass 130 kg is supported at each end. An 90 kg student stands 2.0 m from support 1. (beam 1 is to the left, and beam 2 is on the right.) How much upward force does support 1 exert on the beam? How much upward force does
  80. science

    A child weighing 150 newtons is sitting in a swing. The swing is supported by two ropes, one on each side. What is the tension in one of the ropes?
  81. Physical Science ASAP

    A child weighing 200 newtons is sitting in the center of a swing. the swing is supported evenly by two ropes, one on each side. what is the tension force in one of the ropes?
  82. Physics

    A beam with a length of 7 m and a mass of 110 kg is attached by a large bolt to a support at a distance of d = 3 m from one end. The beam makes an angle θ = 30° with the horizontal, as shown in the figure. A mass M = 492 kg is attached with a rope to one
  83. Physics (Tension)

    A uniform plank of length 2.00 m and mass 35.0 kg is supported by three ropes, as indicated by the blue vectors in the figure below. Find the tension in each rope when a 690-N person is d = 0.725 m from the left end.
  84. physics

    A shop sign weighing 230 N is supported by a uniform 115 N beam as shown in Fig. 9-54. Find the tension in the guy wire.
  85. Physics

    A construction worker attempts to lift a uniform beam off the floor and raise it to a vertical position. The beam is 2.77 m long and weighs 472 N. At a certain instant the worker holds the beam momentarily at rest with one end a distance d = 1.44 m above
  86. physics

    A 24 kg beam is attached to a wall with a hinge and its far end is supported by a cable. The angle between the beam and the cable is 90 degrees and the beam is inclined at an angle of 13.6 degrees with respect to the horizontal. What is the magnitude of
  87. Physics

    A beam of mass mb = 10.0 kg, is suspended from the ceiling by a single rope. It has a mass of m2 = 40.0 kg attached at one end and an unknown mass m1 attached at the other. The beam has a length of L = 3 m, it is in static equilibrium, and it is
  88. woburn

    We consider a man of mass m = 77 kg as shown in the figure below using crutches. The crutches each make an angle of è = 26 with the vertical. Half of the person's weight is supported by the crutches, the other half is supported by the normal forces acting
  89. Physics

    HW8_1: CANTILEVERED BEAM WITH TAPERED SQUARE CROSS SECTION A cantilevered beam of length L has a square cross section of side length linearly varying from hA at the free end to hB=3hA, at the fixed support. A concentrated load, P, is applied at the free
  90. Physics/Mechanics

    HW8_1: CANTILEVERED BEAM WITH TAPERED SQUARE CROSS SECTION A cantilevered beam of length L has a square cross section of side length linearly varying from hA at the free end to hB=3hA, at the fixed support. A concentrated load, P, is applied at the free
  91. Physics

    An 800N billboard worker stands on a 4m scaffold weighing 500N and supported by vertical ropes at each end. How far would the worker stand from one of the supporting ropes to produce a tension of 550N in that rope?
  92. Physics

    A heavy metal beam AB of mass 25kg is supported at it's end .The beam carries a mass of 150kg at a distance of 0.75m from end A .If the beam is 2m long determine the thrust at A and B.
  93. MIT 2.01X

    HW8_1: CANTILEVERED BEAM WITH TAPERED SQUARE CROSS SECTION A cantilevered beam of length L has a square cross section of side length linearly varying from hA at the free end to hB=3hA, at the fixed support. A concentrated load, P, is applied at the free
  94. Physics

    HW8_1: CANTILEVERED BEAM WITH TAPERED SQUARE CROSS SECTION A cantilevered beam of length L has a square cross section of side length linearly varying from hA at the free end to hB=3hA, at the fixed support. A concentrated load, P, is applied at the free
  95. MAT LAB

    HW8_1: CANTILEVERED BEAM WITH TAPERED SQUARE CROSS SECTION A cantilevered beam of length L has a square cross section of side length linearly varying from hA at the free end to hB=3hA, at the fixed support. A concentrated load, P, is applied at the free
  96. Physics

    We consider a man of mass m = 84 kg as shown in the figure below using crutches. The crutches each make an angle of θ = 26degrees with the vertical. Half of the person's weight is supported by the crutches, the other half is supported by the normal forces
  97. Mechanical engineering

    An I section beam of 4m length with end supports is required to carry a point load of 50 KN at its mid pint. The maximum bending stress is limited to 85 MPa, and Modulus of Elasticity of the steel s 200 GPa. Evaluate maximum bending moment that will be
  98. Science

    In the figure below, a uniform beam of weight 420 N and length 3.2 m is suspended horizontally. On the left it is hinged to a wall; on the right is it supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap
  99. physics

    a 650 lb box is hanging by means of two ropes attached to a ceiling as shown by diagram below find the tension on the ropes
  100. Physics

    Engineering 100 Homework Problem #1 Below is a diagram of a beam supported on the left end by a pin connection, and toward the right side by a simple fulcrum. A force F is applied to the far right end of the beam as shown. The uniform beam has mass, m,

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20