# 3. A gas is confined in a 0.47-m-diameter cylinder by a piston, on which rests a weight. The mass of the piston and weight together is 150 kg. The atmospheric pressure is 101 kPa. (a)What is the pressure of the

17,995 results, page 10-
## Physics/Boyles Law

Please confirm/tidy up my fragile understanding as follows: Boyles Law is apparently now known by another name???? If I compressed the air in a room into a cylinder obviously everything that was in the room is now in the cylinder including the heat. As the

*asked by Mike on October 12, 2007* -
## calculus

gas is pumped into a spherical balloon at the rate of 1 cubic feet per minute. How fast is the diameter of the balloon increasing when the balloo0n contains 36 cubic feet of gas?

*asked by Joshie on October 6, 2010* -
## Chemistry

an ideal system absorbed some amount of heat and gas expand and the piston move to 0.4 meter against than the atmospheric pressure. If the cross sectional area of the container is 0.6 meter2. What is the amount of heat absorbed?

*asked by Muhammad on March 3, 2015* -
## physics

A rigid tank having a volume of 0.100 m3 contains helium gas at 155 atm. How many balloons can be inflated by opening the valve at the top of the tank? Each filled balloon is a sphere 0.300 m in diameter at an absolute pressure of 1.15 atm. (Remember that

*asked by Anonymous on March 7, 2015* -
## Calculus help

You are going to make many cylindrical cans. The cans will hold different volumes. But you'd like them all to be such that the amount of sheet metal used for the cans is as small as possible, subject to the can holding the specific volume. How do you

*asked by Katie on March 21, 2017* -
## physics

what formula do i need in order to solve this a force of 230 N applied on a hydraulic lift raises an automobile weighing 6500 N. If the applied force is exerted on a 7.0 m^2 piston, what is the area of the piston beneath the automobile? can someone show me

*asked by y912f on February 18, 2009* -
## PHYSICS

You are using a hydraulic jack to lift a 12000 Newton object. This input piston of your jack has a radius of 0.85 meters and you can exert a maximum of 3500 Newtons on it. How large does the radius of the output piston need to be in order to lift this

*asked by GRISSELL on March 4, 2012* -
## Chemistry 101

What is the mass of water (in grams and pounds). contained in a 100. foot long pipe that has an internal diameter of 6.5 centimeters? The density of water is 1.00 g/ cm^3. The volume of a cylinder is (pi)r^2L.

*asked by Lilly on January 18, 2016* -
## Chemistry

Mary was determining the density of a metal cylinder. When recording the diameter, she mistakenly recorded a number that was too small. Will her calculated value for density be too high or too low? Explain

*asked by Anonymous on October 1, 2015* -
## Chemistry 101

What is the mass of water (in grams and pounds). contained in a 100. foot long pipe that has an internal diameter of 6.5 centimeters? The density of water is 1.00 g/ cm^3. The volume of a cylinder is (pi)r^2L.

*asked by Lilly on January 19, 2016* -
## College Physics

The rotor is an amusement park ride where people stand against the inside of a cylinder. Once the cylinder is spinning fast enough, the floor drops out. A-What force keeps the people from falling out the bottowm of the ride? I think that it's the Normal

*asked by JP on October 21, 2008* -
## PHYSICS

A hollow brass cylinder is weighed on a pan balance (kitchen scale) which read in kg. The scale reading is 5.56 kg. The brass cylinder is now removed from the scale and is replaced by a beaker of liquid density 1.56 * 10^3 kg/m^3; the scale now reads 17.50

*asked by Alexandria on August 10, 2011* -
## geometry

the volume of a cylinder is 88 m. If the radius of the cylinder is quadrupled, what will be the volume of the new cylinder in cubic meters?

*asked by Mary on April 22, 2012* -
## A.P Chemistry

A different rigid 5.00L cylinder contains 0.176mol of NO(g) at 298 k. A 0.176mol sample of 02(g) is added to the cylinder, where a reaction occurs to produce NO2(g) (d) write the balanced equation for the reaction. (e) calculate the total pressure, in atm,

*asked by Brianna on October 23, 2006* -
## Another A.P Question

A different rigid 5.00L cylinder contains 0.176mol of NO(g) at 298 k. A 0.176mol sample of 02(g) is added to the cylinder, where a reaction occurs to produce NO2(g) (d) write the balanced equation for the reaction. (e) calculate the total pressure, in atm,

*asked by Brianna on October 24, 2006* -
## science

A cylinder of length 5cm and uniform cross section area 50.24cm^2 is suspended from a spring balance and totally immersed in water.If the density of the material of the cylinder is 1.25g/m^3. Determine the upthrust on the cylinder. Take g=10m/s^2 density

*asked by Cyprian on March 2, 2016* -
## physics rotations-please help

Two masses, mA = 35.0 kg and mB = 42.0 kg, are connected by a rope that hangs over a pulley (as in the figure). The pulley is a uniform cylinder of radius 0.50 m and mass 4.8 kg. Initially mA is on the ground and mB rests 2.5 m above the ground. If the

*asked by Liz on March 12, 2010* -
## Math, Algebra (fast help would be nice)

So I did this whole math test and before I could hit "finish", my computer died and nothing saved. I have no memory of how I figured them out. Could you guys help please? Find the lateral area of the square pyramid. Show all steps. Base: 8m Length(height):

*asked by MathMakesMeDie on April 3, 2017* -
## ap chemistry

A sample of gas in a cylinder of volume 4.09 L at 289 K and 3.43 atm expands to 7.73 L by two different pathways. Path A is an isothermal, reversible expansion. Calculate the work

*asked by cheri on October 31, 2012* -
## Physics

It has been suggested that rotating cylinders about 10 mi long and 5.4 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall

*asked by Lou on December 3, 2010* -
## physics

The bolts on the cylinder head of an engine require tightening to a torque of 63 . If the six-sided bolt head is 15 in diameter, estimate the force applied near each of the six points by a socket wrench.

*asked by cara on April 19, 2011* -
## Physics

It has been suggested that rotating cylinders about 10 mi long and 5.6 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall

*asked by Alexander on April 7, 2010* -
## physics

It has been suggested that rotating cylinders about 10 mi long and 4.9 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall

*asked by kaitlyn on December 1, 2010* -
## physics

Find the strain and stress on a 1.5 inch diameter cylinder which is subjected to a load of 7.8 tons and measures 11.92 inches instead of the original 12 inch length. What is the Modulus of Elasticity for the material?

*asked by stacey graham on April 16, 2010* -
## Chem

How would increasing the volume of the reaction vessel affect these equilibria. You don't have to tell me the answers, but can you please explain to me how I get the answer. a) NH4Cl(solid) NH3(gas) + HCL(gas) b) N2(gas) + O2(gas) 2NO(gas)

*asked by Sammy on March 11, 2010* -
## Physics

A massless string is wrapped around a cylinder of mass 0.400 kg and radius 0.100 m. The string is attached to the ceiling. The cylinder is released. As it falls, the string unwinds. What is the magnitude of the acceleration of the cylinder as it falls in

*asked by Chris on May 4, 2012* -
## physics.pls help

The volume of a cylinder is defined by the formula V=pie R squared h. If initially have a cylinder with a volume of 10m cubed. Find the volume of the cylinder if the height doubles and if the height is cut in half. pls i really need help.

*asked by ted on November 4, 2011* -
## math

how would you find the surface area of a cylinder with 1.7m for the diameter, and 3m for the height? would you use the formula S.A = 2pi x r x h, or S.A = area of two congruent circles + area of rectangle?

*asked by beeca on December 10, 2008* -
## Fluid Mechanics

In a hydraulic system a 20.0-N force is applied to the small piston with cross sectional area 25.0 cm2. What weight can be lifted by the large piston with cross sectional area 50.0 cm2?

*asked by Justin on October 29, 2014* -
## Physics

A large solid cylinder rolls without slipping down a 40 m long hill with a 30 degree slope. The cylinder then rolls a short distance over level ground and then off a 20 meter high sheer cliff. How far from the base of the cliff does the cylinder land?

*asked by Mary on April 10, 2012* -
## More physics help

A solid cylinder with a radius of 5.08 cm starts from rest at the top of a 12m long ramp inclined 20.3 degrees above the horizontal. When it reaches the bottom of the ramp 3.25s later the cylinder has a final linear velocity of 7.38 m/s. What was the

*asked by Anonymous on October 16, 2017* -
## maths

A rectangle is of length 8 inches, breath 11 inches and thickness 2 inches. When it is shaped to a cylindrical rod with the diameter is 10m. What is the height of the cylinder?

*asked by Anonymous on September 2, 2013* -
## Math

The base of a 6-inch long ice cream cone with a diameter of 2 inches, is cut 0.25 inches from the base. This cut creates two shapes, one is a cone, and the other one resembles a cylinder since it was cut so close to the base. What is the BEST estimate for

*asked by Lauren on August 10, 2015* -
## physics

It has been suggested that rotating cylinders about 12 mi long and 4.1 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall

*asked by monic on November 15, 2012* -
## physics

It has been suggested that rotating cylinders about 12 mi long and 5.4 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall

*asked by jb on November 21, 2009* -
## physics

It has been suggested that rotating cylinders about 12 mi long and 4.6 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall

*asked by Anonymous on October 22, 2009* -
## physics

It has been suggested that rotating cylinders about 9 mi long and 5.1 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall acceleration

*asked by Anonymous on November 14, 2011* -
## geometry

The Giant Ocean Tank in Boston's New England Aquarium is a cylinder that is 23 feet high and has a volume of 200,000 gallons, (1 gallon = 0.134 ft^3). Find the diameter of the tank.

*asked by Piggy on March 3, 2012* -
## physics

It has been suggested that rotating cylinders about 9 mi long and 6.0 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall acceleration

*asked by Anonymous on June 18, 2010* -
## Heat!!!

Can you please check my answers. My teacher gave me a list of 200 questions to study, but I lost the answer sheet. Can you please help me with these 23 Thanks 1. A silver bar 0.125 meter long is subjected to a temperature change from 200°C to 100°C. What

*asked by Brooke on July 5, 2011* -
## physics

A 16 lb block rests on a horizontal frictionless surface. A cord attached to the block, running horizontally, passes over a pulley whose diameter is 1 in, to a hanging block weighing 16 lb. The system is released from rest, and the blocks are observed to

*asked by Science on May 7, 2013* -
## Integrated Physics and Chemistry

In an internal combustion engine, the gas vapor/air mixture enters the cylinder during the ____ stroke. A)intake B)compression C)power D)exhaust

*asked by Ashley!! on April 21, 2011* -
## Geometry

Solve for z. I got z=72 degrees and i don't know how I got it. The circle has diameter AB then another diameter CD. Arc AD = 40 degrees then angle DEB = 124 degrees and z = BC. The diameter DC intersects diameter AB. Please help i can't figure it out and

*asked by Lexy on June 16, 2015* -
## PHYS101

For a system,the cylinder on the left,at L,has a mass of 600kg and a cross-sectional area of 800centi meter squad.The piston on the right,at S,has cross-sectional area 25centi meter squad abd negligible weight.If the apparatus is filled with

*asked by KABELO on April 19, 2010* -
## physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130 ) to a wall. A second block, of mass = 1.35 , rests on top of . The coefficient of static friction between the two blocks is 0.40. What is the maximum

*asked by steve on January 25, 2013* -
## physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130 ) to a wall. A second block, of mass = 1.35 , rests on top of . The coefficient of static friction between the two blocks is 0.40. What is the maximum

*asked by victor on January 25, 2013* -
## Math

Mass of cylinder 1 = 1.35 mass of cylinder 2. Volume of cylinder 1 = 0.792 volume of cylinder 2. Density of cylinder 1 = 2.10 g/cc. What id density of cylinder 2?

*asked by Kent on September 6, 2013* -
## Physics

A clown at a birthday party has brought along a helium cylinder, with which he intends to fill balloons. When full, each balloon contains 0.00280 m3 of helium at an absolute pressure of 1.20 x 105 Pa. The cylinder contains helium at an absolute pressure of

*asked by Anonymous on August 23, 2015* -
## PHYSICS

A 5 kg block rests on a frictionless horizontal surface. A cord attached to the block passes over the pulley whose diameter is 0.120 m to the hanging block of mass 5 kg. The system is released from rest and the blocks are observed to move 3m in 2.0 s. A.

*asked by Happinessdelight on May 17, 2017* -
## PHYSICS, help!

A 5 kg block rests on a frictionless horizontal surface. A cord attached to the block passes over the pulley whose diameter is 0.120 m to the hanging block of mass 5 kg. The system is released from rest and the blocks are observed to move 3m in 2.0 s. A.

*asked by Sunny on May 17, 2017* -
## physics (last problem)help

On a calm, bright day, you're scuba diving in a deep lake (n = 1.33), 5.40 m from your sailboat. When you are 3.10 m below the surface, the top of the sailboat mast appears to you to be in a direction 40.0° from vertical. Calculate the height of the mast

*asked by RUdi on September 3, 2010* -
## physics

In a water pistol, a piston drives water through a larger tube of radius 1.00 cm into a smaller tube of radius 1.00 mm. (a) If the pistol is fired horizontally at a height of 1.5m, use ballistics (2-D projectile motion) to determine the time it takes water

*asked by anon on February 4, 2013* -
## Physics 1

A rotating cylinder about 5.0 miles in diameter is designed to be used as a space colony. With what tangential velocity must it rotate so that the residents on it will experience the same acceleration as that due to gravity on Earth? Recall that ag=g=-9.8

*asked by Brittany on April 7, 2015* -
## phycis

A cylindrical tank has a tight-fitting piston that allows the volume of the tank to change. The tank contains 0.5m^3 of air at a pressure of 2*10^5 Pa. The piston is slowly pushed in until the pressure of the air is increased to 2.5*10^5 Pa. If the

*asked by joann on December 14, 2010* -
## Physics

It has been suggested that rotating cylinders about 9 mi long and 5.1 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall acceleration

*asked by Anonymous on November 14, 2011* -
## calculus help

A drinking cup is made in the shape of a right circular cylinder. for a fixed volume, we wish to make the total material used, the circular bottom and the cylindrical side, as small as possible. Find the ratio of the height to the diameter that minimizes

*asked by Temel on April 25, 2014* -
## Physics - fluids

A solid cylinder (radius = 0.170 m, height = 0.150 m) has a mass of 7.00 kg. This cylinder is floating in water. Then oil (ñ = 0.866 kg/m3) is poured on top of the water until the situation shown in the drawing results. How much of the height of the

*asked by Erin on November 25, 2009* -
## Physics

A solid cylinder (radius = 0.150 m, height = 0.120 m) has a mass of 7.00 kg. This cylinder is floating in water. Then oil ( = 725 kg/m3) is poured on top of the water until the situation shown in the drawing results. How much of the height of the cylinder

*asked by mark on November 7, 2007* -
## physcs

A string is wrapped around a uniform solid cylinder of radius 3.10 cm, as shown in the figure. The cylinder can rotate freely about its axis. The loose end of the string is attached to a block. The block has mass 16.3 kg, and the cylinder has mass 11.2 kg.

*asked by asefa on December 1, 2009* -
## chemistry

An enclosed cylinder has 3 moles of gas with a volume of 60 L and a temperature of 400 K. What is the pressure inside the container? Round to the nearest tenth. Don't forget the units.

*asked by Liz on July 4, 2010* -
## Science, Physical Chemistry

On the bottom of a sea (depth:10m) a bubble of a mathane gas if formed (diameter,d bottom=1 cm). What is the diameter of the bubble, when it reaches at the surface? The sea water temperature is 5 C at the bottom and 25 C on the surface.

*asked by Tufan on March 25, 2008* -
## Geometry

Two cylinders have the same volume. If the radius of cylinder I is 3 times the radius of cylinder II, then the height of cylinder II is how many times the height of cylinder I? A. 12 B. 9 C. 6 D. 3 Please explain how, if possible.

*asked by Samantha on December 29, 2012* -
## Physics

Use Bernoulli's equation to determine the velocity with which water will exit from a hole in a uniform cylinder when the cylinder is filled to a point 3.1 meters above the hole, assuming that the water in the cylinder moves with negligible velocity.

*asked by Plaster on April 6, 2010* -
## Physic Help

Charge is distributed through an infinitely long cylinder of radius R in such a way that the charge density is proportional to the distance from the central axis: ß = A r, where A is a constant and ß is the density. (a) Calculate the total charge

*asked by Lindsey on February 18, 2013* -
## PHYSICS HELP

A solid cylinder has an area of 10cm2 and a height of 1.0 m. The cylinder is composed of two different materials with mass densities of 2000 kg/m3 and 1500 kg/m3. If each of the two materials occupies an equal volume, what is the mass of the cylinder?

*asked by Melissa on August 9, 2011* -
## physics

An amusement park ride consists of a large vertical cylinder that spins about Figure P6.61 its axis fast enough such that any person inside is held up against the wall persons who walk around on the inner wall of the outer rim. Find the rate of rotation of

*asked by Anonymous on October 2, 2011* -
## statics/physics

The uniform 10-kg ladder in the figure rests against the smooth wall at B, and the end A rests on the rough horizontal plane for which the coefficient of static friction is 0.3. determine the angle of inclination of the ladder and the normal reaction at b

*asked by Trisha on December 8, 2014* -
## 8th grade math

The diameter of the sun is approximately 1.4x10 to the power 9 km and the diameter of earth is approximately 1.28 x10 to the 4th power km. About how many times earths diameter is the suns diameter. Write in scientific notation.

*asked by Mythreyee on October 19, 2016* -
## chemistry

how many moles of gas are contained in a 50.0L cylinder at a pressure of 100.0 atm and a pressure of 35 C?

*asked by donna on February 22, 2011* -
## Math

A cylinder is inscribed in a cone as shown in the diagram below. The cone has a height of 8cm and a fixed radius of R cm. The cylinder has a radius of x cm and a height of h cm. Show that the volume of the cylinder is maximised when x=kR, where k is a

*asked by Isabel on November 29, 2016* -
## Physics

Four objects - a hoop, a solid cylinder, a solid sphere, and a thin, spherical shell - each has a mass of 4.59 kg and a radius of 0.252 m. (a) Find the moment of inertia for each object as it rotates about the axes shown in the table above. hoop____ kg·m2

*asked by Ana on March 19, 2010* -
## chemistry

A plastic cylinder full of acetylene (C2H2) has a rigid volume of 2.92 L and a pressure of 1.80 atm at 20 °C. The cylinder can only withstand a pressure of 5 atm. Left inside a hot car where the temperature can reach 50 °C, is there danger of the

*asked by Anonymous on June 20, 2012* -
## physics

Assuming biological substances are 90% water and the density of water is 100 kg/meter cubed, estimate the mass of a fly, which can be approximated by a cylinder 4 mm long and 2 mm in diameter (volume (length*pi*radius squared)

*asked by Mariah on September 19, 2010* -
## physics

It has been suggested that rotating cylinders about 12.5 mi long and 4.88 mi in diameter be placed in space and used as colonies. What angular speed must such a cylinder have so that the centripetal acceleration at its surface equals the free-fall

*asked by king on January 6, 2016* -
## math

Oatmeal is packed in a cylindrical container The diameter of the container is 13cm and its height is 24 cm. Determine in terms of TT (pi), the volume of the cylinder, in cubic centimeters v=TTr^2h v=TT6.5^2(24) v=1014 TT(pi) Is this correct? Thanks for

*asked by diane on May 26, 2014* -
## Physics also

A cylindrical diving bell 5 m in diameter and 10 m tall with an open bottom is submerged to a depth of 150 m in the ocean. The temperature of the air at the surface is 20 degrees Celsius, and the air temp 150 m down is 2 degrees Celsius. The density of

*asked by Phil on January 8, 2009* -
## Physics - Submerged Cylinder

A cylindrical diving bell 5 m in diameter and 10 m tall with an open bottom is submerged to a depth of 150 m in the ocean. The temperature of the air at the surface is 20 degrees Celsius, and the air temp 150 m down is 2 degrees Celsius. The density of

*asked by Phil on January 8, 2009* -
## physics

A bubble of gas, diameter 2 mm, is trapped in a container of liquid at normal atmospheric pressure (1 × 10^5 Pa) and a temperature of 25 °C. The container is opened on board an aircraft where the temperature is 22 °C and the surrounding pressure is

*asked by meme on June 3, 2011* -
## thermodynamics

if a pump discharges 75 gpm of water whose specific weight is 61.5 lb/ft^3(g=31.95fps^2). find a) the mass flow rate in lb/min, and b) and total time required to fill a vertical cylinder tank 10ft in diameter and 12ft high.

*asked by 18ms on December 8, 2012* -
## Math

Cylinder A has radius r and height h. Cylinder B has radius 2r and height 2h. How many times greater is the surface area of Cylinder B than the surface area of Cylinder A? I have no idea how to start doing this problem. Are there any tips on how to start?

*asked by Rylie on December 12, 2016* -
## physics

In the figure, the radius of the submerged cylinder is 10 cm. The height is 25 cm. The cylinder is made of Aluminum whose density is 2.7g/cm3 the water density is 1g/cm3 What is the buoyant force on the cylinder? Repeat the calculation if the object were

*asked by willim on August 1, 2016* -
## Science

A gold chain with a mass of 40 grams is placed into a graduated cylinder. The graduated cylinder had a volume of 30 ml before the chain was placed in graduated cylinder. After it was added to the graduated cylinder the volume had risen to 50 ml. What is

*asked by Kyra on October 21, 2016* -
## CHEMISRY

A SAMPLE OF 5.5L OF ARAGON DAS IS STORED IN A SYLINDER AT A TEMPERATURE OF 32.2C AND A PRESSURE 8.42 ATM. THE SAMPLE IS TRANSFERED COMPLETELY TO ANOTHER 2.8L CYLINDER. SEVERAL HOURS AFTER THE TRANSFER THE SECOND CYLINDER HAS OBTAINED A TEMPERATURE OF 60C.

*asked by TIFFANY on January 9, 2007* -
## Physics

A cylinder with moment of inertia 22.1 kg m2 rotates with angular velocity 5.71 rad/s on a frictionless vertical axle. A second cylinder, with moment of inertia 28.3 kgm2, initially not rotating, drops onto the first cylinder and remains in contact. Since

*asked by Wolves on June 27, 2013* -
## Chemistry

A reaction requires 22.4 L of gas at STP. You have 30.5 L of gas at 101.5 kPa and 373 K. Which of the following statements is true? (Use the ideal gas law: PV = nRT where R = 8.31 L-kPa/mol-K.) You will have excess gas for the reaction. You will have

*asked by Michael on February 13, 2017* -
## chemistry

How many grams of chlorine gas are present in a 150.0 liter cylinder of chlorine held at a pressure of 1.00 atm and

*asked by Anonymous on July 9, 2010* -
## chem

How many grams of chlorine gas are present in a 150. liter cylinder of chlorine held at a pressure of 1.00 atm and 0.0 °C?

*asked by gie on October 28, 2010* -
## physics

A graduated cylinder is inverted in a very large bucket of water. The depth of the water in the container is 6 m and the top of the bucket is open to the air in the room. The mouth (bottom) of the graduated cylinder is 4 m above the bottom of the

*asked by unknown on December 30, 2013* -
## PHYSICS

Identify the following gas compression descriptions as adiabatic, isothermal or isobaric. a. As the gas compresses, the internal energy ÄU, decreases when the temperature decreases; the work done on the gas is greater than the heat removed from the gas:

*asked by GRISSELL on March 4, 2012* -
## MATHS

"A DIAMETER OF THE WHEEL OF A CAR IS 84 CM AND THE SPEED OF A CAR IS 72KM/H. THE NO. OF REVOLUTIONS MADE BY THE WHEEL IN 11 MINUTES IS."IS THIS QUESTION EXAMPLE OF CIRCLE OR CYLINDER?

*asked by ZAHEER ALI KHAN on November 27, 2016* -
## Chemistry

How many glucose molecules does an E coli cell contain if it has an internal glucose concentration of 1.0 mM. The E coli is a cylinder that is 2 micrometers long and 1 micrometer in diameter. Really stuck on this one, thanks for the help!

*asked by Janae on September 8, 2009* -
## Math

The manager of the theater wants to sell the popcorn in a cone with a diameter of 7 inches. What does the height of the cone need to be in order to hold the same amount of popcorn as the cylinder?

*asked by Alanda on April 30, 2015* -
## Calculus

Find the radius, volume, and hieght of the right- circlar cylindar that can be inscribed in a right- circular cone with a radius of 6 inches and a hieght of 10 inches. There are an infinite number of solutions to this. Did you mean the right cylinder with

*asked by Tyler on November 28, 2006* -
## math

A stack of 10 quarters is a cylinder. If the diameter of a single quarter is 2.2 cm and the approximate height is 0.17 cm, what is the surface area of a 10-quarter stack?

*asked by supreme on October 9, 2018* -
## math

A stack of 10 quarters is a cylinder. If the diameter of a single quarter is 2.2 cm and the approximate height is 0.17 cm, what is the surface area of a 10-quarter stack?

*asked by Anonymous on March 29, 2012* -
## Calc

We assume that an oil spill is being cleaned up by deploying bacteria that consume the oil at cubic feet per hour. The oil spill itself is modeled in the form of a very thin cylinder as depicted below. Its height is the thickness of the oil slick. We

*asked by Anonymous on February 26, 2008* -
## calculus

A potter forms a piece of clay into a cylinder. As he rolls it, the length,L, of the cylinder increases and the radius, r, decreases. If the length of the cylinder is increasing at .1 cm per second, find the rate at which the radius is changing when the

*asked by mandy on February 4, 2010* -
## Chemistry

A 10.0 L container contains 1.0 L of solution of a gas. Assume [gas]=1.5x10^-4 M in solution when 2 mol of gas remain in gas form. If 1 mol of gas is removed from the gas phase, what will be the new concentration of the gas in solution? What is the value

*asked by Sarah on February 16, 2016* -
## CHEMISTRY

*Specific Gravity A cylinder of plastic is 100 mm long and 50 mm in diameter. It has a mass of 1 kg. Determine its specific gravity and indicate whether it would float or sink in water . PLLEEEEEEEEEEEASE

*asked by Myka on July 3, 2013* -
## physics

1.00L piston with 1.00 mole of an ideal gas at 298.0K and 1.00bar is isothermally and reversibly compressed to a final volume of 0.200L, the irreversibly expanded in first step to its original volume with an applied pressure of 1.00bar. Calculate the

*asked by Orbit on March 1, 2017*