1. Science

    25 cm of 1.0 mol dm− NaOH is added to 25 cm of 1.0 mol dm− HCl. The temperature rise is 6¢XC. Which reactants will also give a temperature rise of 6¢XC? A. 25 cm of 2.0 mol dm− NaOH and 25 cm of 2.0 mol dm− HCl. B. 50 cm of 1.0
  2. CHEM

    Which of the following mixtures will result in the formation of a buffer solution when dissolved in 1.00 L of water? i) 0.50 mol NaOH and 0.50 mol HCl. ii) 0.50 mol NaCl and 0.25 mol HCl. iii) 0.50 mol NaF and 0.25 mol HF. iv) 0.50 mol NaOH and 0.25 mol
  3. chemistry

    Which of the following mixtures will be a buffer when dissolved in a liter of water? a. 0.1 mol Ca(OH)2 and 0.3 mol HI b. 0.3 mol NaCl and 0.3 mol HCl c. 0.4 mol NH3 and 0.4 mol HCl d. 0.2 mol HBr and 0.1 mol NaOH e. 0.2 mol H3PO4 and 0.1 mol NaOH i think
  4. Chemistry

    The heat of neutralization of HCl(aq) and NaOH(aq) is -55.90 kJ/mol of water produced. If 50.00 mL of 1.16 M NaOH at 25.15 ºC is added to 25.00 mL of 1.79 M HCl at 26.34 ºC in a plastic-foam cup calorimeter, what willthe solution temperature be
  5. Chemistry

    50 mL of copper(II) sulfate reacts with 50 mL of sodium hydroxide. Their concentrations are 0.3 M and 0.6 M respectively. The temperature increased to 23.6 C from 23.4 C. Determine the enthalpy change for the reaction in kJ/mol of sodium hydroxide.
  6. Chemistry(Please check)

    Which of the following mixtures will be a buffer when dissolved in 1 liter of water? 0.10 mol Ba(OH)2 and 0.20 mol HCl 0.30 mol KCl and 0.30 mol HCl 0.40 mol NH3 and 0.40 mol HCl 0.20 mol HNO2 and 0.10 mol NaOH 0.20 mol HBr and 0.10 mol KOH My answer is
  7. Chemistry

    when pure sodium hydroxide is dissolved in water , heat is evolved in a laboratory experiment measure a molar heat of solution of sodium hydroxide the following procedure was followed. to a calorimeter containing 300g of water at 20.0 C and 10.65g of NaOH
  8. Chemistry

    Problem: Assume 200.0 mL of 0.400M HCl is mixed with 200.0 mL of 0.400M NaOH in a coffee-cup calorimeter. The temperature of the solutions before mixing was 25.10°C; after mixing and allowing the reaction to occur, the temperature is 27.78°C. What is the
  9. chemistry

    Which of the following would for a buffer if added to 250.0 mL of .150 M SnF2? a).100 mol HCl b).060 mol HCl c).040 mol HCl d).040 mol NaOH e).040 mol HF
  10. moles of water produced?

    We mixed HCl and NaOH into water and got this table, all for trial 1 Here is all of the info for trial 1: trial 1: volume of 2 M NaOH used: 50.0 mL initial temperature of NaOH: 24.4 degrees C volume of 2 M HCl used: 50.0 mL initial temperature of HCl: 24.3
  11. Chemistry

    I need help I can't seem to get the right answer. Please help! 1/2 H_2 (g) + 1/2 Cl_2 (g) --> HCl (g) -92.3 kJ/mol Na(s) + 1/2 O_2(g) + 1/2H_2(g) --> NaOH(s) -426.8 kJ/mol NaCl(s) --> Na(s) + 1/2Cl_2(g) 411.1 kJ/mol H_2O(l) -->H_2(g) +
  12. General Chemistry

    Starting out with 50 mL of 0.20 M NaHCO3, calculate how many mL of 0.50 M NaOH solution to add to make 100 mL of approximately 0.10 M (total) buffer solution with a pH of 10.35. By adding NaOH, some of the NaHCO3 gets converted to the conjugate Na2CO3.
  13. Grade 12 chemistry

    This is the second reaction: HCl(aq)+NaOH(aq)-->NaCl(aq)+H2O(l) (Heat of neutralization) This reaction involves mixing two solutions: 1.00 mol/L NaOH and 1.00 mol/L HCl. Trial 1: 48.0 mL of the NaOH solution is mixed with 47.5 mL of the HCl. The
  14. Chemistry

    1. A good indicator will have a(n)____ close to this volume and pH. I think it's endpoint but it's wrong. 2. (part a) What is the pH of the solution created by combining 1.70 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the
  15. chemistry

    530 mL solution 10% HCl has been spilt onto the bench. It cannot be diluted or washed away. How much of the granular NaOH from the container seen in a must be used to neutralise the acid? [Using NaOH: MM = 40 g/mol] 1. I have NaOH + HCl --> NaCl + H2O.
  16. chemistry

    Could you help me get a definition for each of these words. for i can have a better understanding of them Thanx Titration gas collection crystalization fractional distillation solvent limiting reagent I have defined titration, gas collection,
  17. AP Chemistry

    (a) What is the pH of a 2.0 molar solution of acetic acid. Ka of acetic acid = 1.8 x 10¯5 (b) A buffer solution is prepared by adding 0.10 liter of 2.0 molar acetic acid solution to 0.1 liter of a 1.0 molar sodium hydroxide solution. Compute the hydrogen
  18. Chemistry

    In a constant-pressure calorimeter, 65.0 mL of 0.330 M Ba(OH)2 was added to 65.0 mL of 0.660 M HCl. The reaction caused the temperature of the solution to rise from 23.85 °C to 28.35 °C. If the solution has the same density and specific heat as water,
  19. chemistry

    if my reaction is 2Na + 2H2O -> 2NaOH +H2, and i have been given 1 gram of sodium, how would i measure the theoretical change in heat of the reaction, assuming the reactants are at room temperature? Look in your text, probably in the appendix, for delta
  20. CHEMISTRY FOR DR. BOB or anyone else

    A hypothetical weak acid HA, was combined with NaOH in the following proportions: 0.20 mol HA, 0.08 mol NaOH. The mixture was then diluted to a total volume of 1L, and the pH measured. (a) If pH=4.80, what is the pKa of the acid (b) how many additional
  21. chemistry (AP)

    The heat of neutralization of HCl (aq) by NaOH is -55.9Kj/mol H2) produced. If 50ml of 1.6M NaOH at 25.15 celsius is added to 25ml of 1.79M HCl at 26.34 celsius in a plastic foam cup calorimeter, what will be solution temperature be immediately after the
  22. Chemistry

    I have troubles with a titration of NaOH and HCl. The volume of the HCl is 30 ml and its concentration is 0.1 mol per liter The volume of the NaOH is 25 ml and the concentration is to be worked out. I understand that the reaction ratio for HCl to
  23. chemistry

    A chemist wishes to prepare 250mL of a buffer that is pH = 4.50. Beginning with 100mL of 0.12 mol L^(-1) acetic acid and a supply of 0.10 mol L^(-1) NaOH, explain how this could be done. How much 0.20 mol L^(-1) NaOH must be added to this buffer to raise
  24. physics

    A monatomic ideal gas is thermally insulated, so no heat can flow between it and its surroundings. Is it possible for the temperature of the gas to rise? If the temperature can rise, how does it rise?
  25. Chemistry

    It was mentioned that the rates of many reactions approximately double for each 10 °C rise in temperature. Assuming a starting temperature of 25 °C, the activation energy would be_____________ in kJ mol-1, if the rate of a reaction were to be twice as
  26. Chemistry

    Determine the moles of ammonia in the following cobalt ammine complex: A sample of .1500 g of the cobalt ammine complex is places in a flask and 25.00mL of .200M HCL is added. a few drops of bromocresol green is added and the titration with .100M to NaOH
  27. Math

    At 6:00 A.M. the temperature was 33°F. By noon the temperature had increased by 10°F and by 3:00 P.M. it had increased another 12°F. If at 10:00 P.M. the temperature had decreased by 15°F, how much does the temperature need to rise or fall to return to
  28. Chemistry

    500.0 mL of 0.220 mol/L HCl(aq) was added to a high quality insulated calorimeter containing 500.0mL of 0.200 mol/L NaOH(aq).Both solutions had a density of 1g/mL & a specific heat of 4.184 J/g.K.The calorimeter had a heat capacity of 850 J/C.Temperature
  29. chemistry

    Which of the following mixtures will result in the formation of a buffer solution when dissolved in 1.00 L of water? i) 0.50 mol HClO2 and 0.25 mol HCl. ii) 0.50 mol HClO2 and 0.25 mol NaOH. iii) 0.50 mol NaClO2 and 0.50 mol HClO2. iv) 0.50 mol NaClO2 and
  30. CHEM

    Can you please check my work? I got -4.3KJ/mol If this is not right can you tell me what I am doing wrong? Thank you! Questions. 1.a. Use Hess's Law and the measured mean enthalpy changes for the NaOH-HCl and NH3-HCl reactions to calculate the enthalpy
  31. Chemistry

    In a constant-pressure calorimeter, 60.0 mL of 0.330 M Ba(OH)2 was added to 60.0 mL of 0.660 M HCl. The reaction caused the temperature of the solution to rise from 21.71 °C to 26.21 °C. If the solution has the same density and specific heat as water,
  32. Chemistry

    1.38 mol HCl and 2.9 mol NaOH react accord- ing to the equation HCl + NaOH −→ NaCl + H2O . If the limiting reactant is HCl, determine the amount of excess reactant that remains. Answer in units of mol.
  33. Chemistry

    1.38 mol HCl and 2.9 mol NaOH react accord- ing to the equation HCl + NaOH −→ NaCl + H2O . If the limiting reactant is HCl, determine the amount of excess reactant that remains. Answer in units of mol.
  34. chemistry

    In a constant-pressure calorimeter, 60.0 mL of 0.930 M H2SO4 was added to 60.0 mL of 0.320 M NaOH. The reaction caused the temperature of the solution to rise from 22.68 °C to 24.86 °C. If the solution has the same density and specific heat as water
  35. Chemistry

    In this reaction solid NaOH is added to approximately 100 mL of 0.500 mol/L HCl. Trial 1: 2.02 g of solid NaOH is added to 102.0 mL of the HCl solution. The temperature goes from 22.00°C to 32.0°C. Calculate the heat evolved in each trial (Q). I'm
  36. chemistry

    three student chemists measured 50.0 mL of 1.00 M NaOH in separate Styrofoam "coffee cup" calorimeters ( Part B). Brett added 50.0 mL of 1.10 M HCI to his solution of NaOH; Dale added 45.5 mL of 1.10 m HCL 9 eqaul moles) to his NaOH solution. Lyndsay added
  37. chemistry

    Consider the balanced equation 2A(g) + 3G(g) „\ 2X(g) + Z(g). To a 20.0 L container maintained at a temperature of 127 C were added 0.200 mol of A, 0.500 mol of G, 0.400 mol of X, and 0.600 mol of Z. After equilibrium was established, it was found that
  38. chemistry

    5oocm3 of 1.0 mol dm3 of sodium hydroxide solution at room temperature was placed in a styrofoam cup and 25cm3 of 2.0 mol-dm3 of hydrochloric acid was added at the same temperature.The temperature rose by 15.2 degrees celsius. Calculate the heat of
  39. science

    Hey, holidays is over. Time to get back to work. whats the answer to this one find the concentration of hcl in g hcl/kg Naoh + Hcl---> b +c 2.991 mol 25.00mL Density=0.952g/ml also Hcl=36.46g/mol I got approx 4.58 x 10^3 g/mol of the top of my head
  40. chemistry

    So I did a titration lab at school with NaOH and HCl. i have to find: - volume used, NaOH - Moles of NaOH - Moles of HCl -Volume used unknown HCl - Molarity of HCl solution My concentration of NaOH stock solution was 0.100 mol/lL Final buret reading, NaOH:
  41. Acid-Base chem

    Which of the following would for a buffer if added to 250.0 mL of .150 M SnF2? a).100 mol HCl b).060 mol HCl c).040 mol HCl d).040 mol NaOH e).040 mol HF I figured I could find out the pH of the solution with HCl/NaOH/HF added, and then find the pH when
  42. AP Biology

    The respiration of plants is a biochemical reaction and should have a rate determined by the Arrhenius equation, k = Ae-EA/RT. Here, k is the rate, A is a constant, EA is the activation energy for the reaction, R is the gas constant, and T is the
  43. Chemistry

    This problem of the limiting reactant is: Given the reactant amounts specified in each chemical reaction, dtermine the limiting reactant in each case: (I'm just going to take one problem out of the bunch} HCl + NaOH yeilds NaCl + H2O 2.00 2.50 mol mol
  44. Chemistry

    What is the molality of a glucose solution prepared by dissolving 18.0g of glucose, C6H12O6 in 125g of water? A)0.000794 B)0.144 C)0.699 D)0.794 Molality is the number of moles of solute per kilogram of solvent. Because the density of water at 25°C is
  45. biology

    suppose 23mL of NaOH was required. How much Carbonic Acid was neutralized? 1L of .01 NaOH contains ____ mol NaOH? lmL of .01 NaOH contains _____mol NaOH? 23mL of .01 NaOH contains _____ mol NaOH? 2 mol of NaOH react with 1 mol H2CO3 2.3 x 10^-4 mol of NaOH
  46. Chemistry

    You are given 75mL of 1mol/L NaOH and 75 mL of 1mol/L HNO3 at atmospheric pressure. After mixing the two compounds, he measured a rise in temperature from 25°C to 32°C. Find the change in energy of the system in kJ/mol. (Known: Density of aqueous
  47. Dr. BOB chemistry help please!

    hi At a particular temperature, K = 1.00 102 for the following reaction. H2(g) + I2(g)= 2 HI(g) In an experiment, 1.73 mol H2, 1.73 mol I2, and 1.73 mol HI are introduced into a 1.00 L container. Calculate the concentrations of all species when equilibrium
  48. Chemistry

    1.9 mol HCl and 3.8 mol NaOH react according to the equation HCl + NaOH −→ NaCl + H2O . Calculate the amount in moles of NaCl formed. Answer in units of mol
  49. Chemistry

    drwls, if you are there, I got an answer of 42.5 Kelvin, so then that means it is a negative number if converted to degrees Celsius? Question: The heat capacity of a bomb calorimeter is 87.5 kJ/K (this value is for the total heat capacity including that of
  50. chemistry

    Calculate the pH from the addition of 10 mL of a 0.10 M NaOH solution to 90 mL of 0.10 M HCl. okay so i understand how to do most of it but i get messed up at one part.. so i made my equation: NaOH + HCl -> H2O + NaCl (strong base, strong acid= complete
  51. Chemistry

    An equilibrium mixture contains 0.250 mol of each of the products (carbon dioxide and hydrogen gas) and 0.200 mol of each of the reactants (carbon monoxide and water vapor) in a 1.00-L container. CO(g) + H2O(g) <-> CO2(g)+ H2(g) How many moles of
  52. chemistry

    10mL of 0.500M HCl was added to 50mL of 0.100M NaOH in a coffee cup calorimeter, and the temperature increased from 22.3°C to 23.1°C. What is the experimentally determined enthalpy of neutralization of HCl (in kJ/mol)? The specific heat of water is
  53. Chemistry

    Can you check my calculations, please? It's for a lab we did in order to find the the enthalpy of formation of NH4Cl(s). My final answer was -299.4 kJ, while the theoretical, or actual, value is -314.4 kJ. It was the closest value out of everyone in the
  54. Chemistry

    In a constant-pressure calorimeter, 50.0 mL of 0.300 M Ba(OH)2 was added to 50.0 mL of 0.600 M HCl. The reaction caused the temperature of the solution to rise from 24.50 degrees C to 28.59 degrees C. If the solution has the same density and specific heat
  55. Chemistry

    In a constant-pressure calorimeter, 50.0 mL of 0.300 M Ba(OH)2 was added to 50.0 mL of 0.600 M HCl. The reaction caused the temperature of the solution to rise from 24.50 degrees C to 28.59 degrees C. If the solution has the same density and specific heat
  56. Chemistry

    I need help plugging these in. I didn’t understand what DrBoB222 meant 2.A student starts with a titration by placing 30.0mL of 0.25M NaOH into a flask with 3 drops of phenolphthalein. The student then titrated to the endpoint using 18.0mL of HCI.
  57. chemistry

    A 1.35-gram sample of compound X (of MW 88.0 g/mol) was burned in a bomb calorimeter containing 1700 g of water. A temperature rise of 0.96◦C was observed. ∆Erxn for this reaction is −475 kJ/mol of X. What is the heat capacity of the
  58. Inorganic chemistry

    mol KHP = (0.7719g)(1 mol KHP/204.2g) = .0038mol Where are the moles of NaOH? I know that there are 0.02637 L of NaOH and I know M = mol/l I know there are 40g NaOH/mol NaOH There is 1 mol of NaOH in the balanced equation But I do not have grams of NaOH
  59. chemistry

    What mass of sodium hydroxide pellets must be poured into a waste drum containing 20.0 L o 3.0 mol/L sulphuric acid to completely neutralize the waste acid solution? Write a balanced chemical equation for this reaction. okay, so here is the work I already
  60. Chemistry-DrBob222

    I got an answer of -1.34 x 10^3 KJ/mol. A 10.00 mL aliquot of 0.100 M NaOH is added to 15.00 mL of 0.100M HCl in a coffee cup calorimeter. The initial temperature of the two dilute liquids were both 25.0 degrees C and the final temperature of the mixture
  61. chemistry

    The standard free energy of activation of a reaction A is 78.2 kJ mol–1 (18.7 kcal mol–1) at 298 K. Reaction B is ten million times faster than reaction A at the same temperature. The products of each reaction are 10.0 kJ mol–1 (2.39 kcal mol–1)
  62. Chemistry

    Determination of Ksp, ΔG°, ΔH° and ΔS° for Ca(OH)2. *** Need help on problem #3 & #4 *** CALCULATIONS: 1. Calculate the average solubility of calcium hydroxide, Ca(OH)2, at each temperature. 2. Calculate the Ksp for Ca(OH)2 at each
  63. MEC

    When 25.0 mL of 1.00 M HCl (0.025 mol)is mixed with exactly 25.0 mL of NaOH (0.025 mol) in a calorimeter, the temperature of the solution increased from 25.00 °C to 27.30 °C. (a) Is the reaction exothermic or endothermic? (b) If the specific heat of the
  64. CHEMISTRY> HELP QUICK! pls

    Calculate the reaction free energy of: H2(g) + I2(g) 2HI(g) when the concentrations are 0.026 mol L-1 (H2), 0.33 mol L-1 (I2), and 1.84 mol L-1 (HI), and the temperature is 700K. For this reaction Kc= 54 at 700 K. +11.6 kJ mol-1 0 kJ mol-1 -11.6 kJ mol-1
  65. Reposting Chemistry Question -Emergency !!

    Saturated solution of Ca(OH)2 in 0.05349 mol/L NaOH. Temperature: 22.1 * C Volume of Ca(OH)2/NaOH aliquot: 25ml Concentration of Standard HCl: 0.1213M Indicator Used: Bromothymol Blue Ksp from previous part I got 3.55x10^-5 - Average volume of HCl added to
  66. Chemistry

    How would you calculate the pH of the buffer if 1.0mL of 5.0M NaOH is added to 20.0mL of this buffer? Can someone please explain to me how to do B and C step by step so I could understand it clearly? :) Say, for example, that you had prepared a buffer in
  67. Chemistry

    How would you calculate the pH of the buffer if 1.0mL of 5.0M NaOH is added to 20.0mL of this buffer? Can someone please explain to me how to do B and C step by step so I could understand it clearly? :) Say, for example, that you had prepared a buffer in
  68. Chemistry

    If 15.0 mL of a 1.5M HCl solution at 22.5 degrees C is mixed with 25.0mL of a 1.5M NaOH solution at 21.5 degrees C that is in a calorimeter, and the final mixed solution temperature ends up at 28.5 degrees C, 1.)what is the balanced equation for this
  69. Chemistry

    Please help me figure out where I went wrong. HNO3 + KOH -> KNO3 + H2O enthalpy change = -53.4 kJ/mol 55.0 mL of 1.30 mol/L solutions of both reactants, at 21.4°C, are mixed in a calorimeter. What is the final temperature of the mixture? Assume the
  70. Chemistry

    When 0.59 mol I2(g) and 0.59 mol H2(g) are placed into a 1.0-L container at a given temperature, 0.30 mol H2(g) is found to be present after the reaction below reaches equilibrium. Calculate Kc at the given temperature. I2(g) + H2(g) 2HI(g)
  71. chemistry

    An analyst wants to determine the content of a 7% magnesium hydroxide bottle acquired in a drugstore, through the Volumetry method of neutralization. 8.995 g of magnesium hydroxide suspension were avolumados to 100ml of water, then,25 ml were added to the
  72. Chem. thankss!!!

    1.0 mol of water (c=4.184 J/g.oC), 1.0 mol of ethanol (c=2.46 J/g.oC), 1.0 mol of carbon tetrachloride (c=0.861 J/g.oC), and 1.0 mol of ethylene glycol (c=2.42 J/g.oC) at 50oC were each placed into a separate coffee cup calorimeter and the temperature
  73. chemistry

    1.2 mol HCl and 3.9 mol NaOH react to this equation, HCl + NaOH=NaCl + H20 If the limited reactant id HCl, calculate the amount of NaCl formed in moles. Please help and explain how to solve this so I may understand it better please and thank you.
  74. chemistry

    In the experiment you have added 50.0 mL of Ni(H2O)6 2+ to the calorimeter. To this you add 5.0 mL of ethlylenediamine and measure the change in temperature of the solution as the reaction proceeds. The temperature increases by 3.4 oC. Calculate the
  75. Chemistry

    I did a lab today in class and part of the lab is to experimentally find the enthalpy for the dissolution of ammonium chloride by dissolving 4.0 g of NH4Cl(s) in 50.0 mL of H2O(l). I got a -5°C temperature change and calculated delta H to be 15 kJ/mol.
  76. Chemistry

    This is a lab I have, but have no clue what to do. Please do out the steps so i can understand. Reactions and Data: NaOH(s)--> Na1+(aq)+ OH1-(aq) (Heat of solution of NaOH) This reaction involves adding solid NaOH to water and watching the temperature
  77. chemistry

    How many moles of magnesium chloride are formed when 55 mL of 0.70 M HCl is added to 42 mL of 1.204 g Mg(OH)2? Mg(OH)2(s) + 2HCl(aq) MgCl2(aq) + 2H2O(l) A. 0.019 mol B. 0.012 mol C. 0.021 mol D. 0.039 mol
  78. Chemistry

    Help needed with a calorimeter lab. I have to measure the enthalpy of a neutralization reaction between NaOH and HCl as well as find the concentration of NaOH the following ways. - using the mass and volume of NaOH - Using calorimetric data assuming no
  79. biochem

    If 10mL of 1 M HCl is added to 1L of 0.01 M phosphate buffer, pH 7.2, what is the resulting pH? Also what are the conc of H2PO4^1- and HPO4^2- in the final solution? HCl: M = mol / L 1M = mol / 0.01L = 0.01 mol phosphate: M = mol / L 0.01M = mol / 1L =
  80. Chemistry

    A 0.450-gram sample of impure CaCO3(s) is dissolved in 50.0 mL of 0.150 M HCl(aq). The equation for the reaction is: CaCO3(s)+2HCl(aq) -> CaCl2(aq) + H2O(l) + CO2(g) The excess HCl(aq) is titrated by 9.75 mL of 0.125 M NaOH(aq). Calculate the mass
  81. Chemistry again

    How many mol of nitrogen monoxide gas (N2) are in a 1.49 L container at standard temperature and pressure? A. 2.14 x 10–24 mol N2 B. 2.89 x 101 mol N2 C. 8.97 x 1023 mol N2 D. 6.65 x 10–2 mol N2 Apparently my last question didnt make sense so i'm
  82. chemistry

    50.0 mL of a solution of HCl is combined with 100.0 mL of 1.15 M NaOH in a calorimeter. The reaction mixture is initially at 22.4°C and the final temperature after reaction is 31.2°C. What is the molarity of the HCl solution? You may assume that there is
  83. chem

    What is the pH of the solution created by combining 2.40 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? I understand how to find the pH for the NaOH + HCl solution. However, I'm not sure how to find it
  84. chemistry

    Given a percent yield of 45.0% for the reaction: H2 + Cl2 → 2 HCl(g) How many moles of HCl gas are produced if 15.5 L of Cl2 at STP and excess H2 are reacted? 1. 0.769 mol 2. 0.346 mol 3. 0.622 mol 4. 3.08 mol 5. 1.38 mol 6. 0.156 mol
  85. Chemistry

    The complete combustion of 0.100 mol of CH4 in oxygen in a bomb calorimeter caused the water of the calorimeter to rise in temperature from 25.00 degrees Celsius to 37.70 degrees Celsius. Suppose that the combustion of the 0.1 mol of CH4 was instead run at
  86. chemistry

    Given .300 L of a buffer solution that is .250 M HC2H3O2 and .50 M NaC2H302, what is the new pH if .0060 mol HCL is added? what about .0060 mol NaOH?
  87. chemistry

    A student mixed 75.0 mL of water containing 0.75 mol HCl at 25�C with 75.0 mL of water containing 0.75 mol of NaOH at 25�C in a foam cup calorimeter. The temperature of the resulting solution increased to 35�C. How much heat in
  88. Chemistry

    A 1.00 L flask containing the equilibrium mixture CO +Cl2 <-> COCl2 was found to contain 0.400 mol of COCl2, 0.100 mol of CO, and 0.500 mol of Cl2. If 0.300 mol of CO is added at constant temperature, what will be the new concentrations of each
  89. chemistry

    A buffer is prepared consisting of 0.75 mol of sodium dihydrogenphosphate, NaH2PO4, and 0.60 mol of sodium hydrogenphosphate, Na2HPO4, dissolved in 600.0 mL of water. The Ka for the dihydrogenphosphate ion is 6.2 x 10–8 at 25°C. Which of the following
  90. Chemistry

    You know how when you do calculations for the enhaloy change of a reaction you start sort of like this?: NH3(aq) + HCl(aq) → NH4Cl(aq) 25 mL 25 mL 1.0 mol/L 1.0 mol/L n = c x v = 1 mol/L x 0.025L = 0.025 mol How come you only need the moles of one of
  91. science

    Please help me with the following questions. 1. As the mantle heats up due t the heat from the core, it begins to rise. Why does this happen? A. Because density is increasing as temperature increases B. Because density is decreasing as temperature increses
  92. Biochem

    I did a titiration expriment and I need to work out how much Hcl is in the sample (NaOH). The expriment was testing the rate of ester hydrolysis . I was wondering if the the amount of Hcl present is the same as NaOH added due to the equivalence of the acid
  93. Chemistry-Dr.Bob

    You can mix 100.mL of 1.0 M HCl with 100 mL of 1.0 NaOH, both at 25 degree Celcius. The temperature of your calorimeter rises by 5.98 degree C, and its heat capacity is 100 J/degre C. How much energy is released per mol of H2O formed? My answer: 6x10^6 J
  94. Chemistry

    Mg(s) + 2 HCl(aq) --> MgCl2(aq) + H2 (g) DeltaH= -4.6x10^2 kJ How much heat is evolved when 0.598 g of Mg are dissolved in excess HCl? I'm not sure how to go about this problem. What I thought to do was: 0.598 g x 1 mol Mg/24.31 g Mg x 2 mol HCl/ 1 mol
  95. chemistry

    Given the thermochemical equation below, calculate the amount of energy released when 250. g of NaOH (molar mass = 40.0 g/mol) reacts with an excess of HCl. Report answer to the correct number of significant figures in units of kilojoules, kJ. NaOH + HCl
  96. chemistry

    In a coffee cup calorimeter, 50 mL of 0.1 M HCl and 50 mL of 0.1 M NaOH are mixed to yield the following reaction: HCl + NaOH  NaCl + H2O. The two solutions were initially at 22.1 oC and the final temperature is 24.2 oC. Calculate the heat that
  97. Chemistry

    0.5g of MG ribbon is reacted with 100ml of 1M HCL. The initial temperature of HCL is 20.4 degrees celsius. After the reaction the highest recorded temperature is 40.7 degrees celsius. Calculate the molar enthalpy of MG. I tried to find mol from HCl and
  98. Chemistry

    H2 and F2 react according to the following equation, forming HF. H2(g) + F2(g)  2HF(g); H° = –271 kJ If H2(g) and F2(g) were mixed in a thermally insulated vessel, the reaction that occurred would be a. endothermic, and the temperature
  99. Chemistry

    An ice cube of mass 10g at -10C is added to the beaker containing 150mL of water at 88.5C. Assuming no heat is lost to the surrounding; calculate the equilibrium temperature for the liquid after the ice melts.(Heat of fusion for H2O = 6.01 kJ/mol. Heat of
  100. chemistry

    An ice cube of mass 10g at -10C is added to the beaker containing 150mL of water at 88.5C. Assuming no heat is lost to the surrounding; calculate the equilibrium temperature for the liquid after the ice melts.(Heat of fusion for H2O = 6.01 kJ/mol. Heat of