you've bought a new truck and want to show off your ag engineering skills by painting the bore, stroke, piston displacement, clearance volume, and compression ratio for the engine on the hood. All you know about the truck is that

70,665 results

engineering HELP

you've bought a new truck and want to show off your ag engineering skills by painting the bore, stroke, piston displacement, clearance volume, and compression ratio for the engine on the hood. All you know about the truck is that has a 4 cyl 250 cubic in engine. An internet ...

math

A four-cylinder engine has a bore of 90mm and a stroke of 100mm. The clearance volume of each cylinder is 0.065 L. Assuming compression starts at the bottom of the stroke, determine: (a) the capacity of the engine (b) the compression ratio of the engine

geometry

the bore of an engine cyclinder is the diameter of the piston and the stroke is the distance that the piston will travel up the cyclinder wall. The displacement is the volume of space that the piston goes thru. If the piston is 3.97" in dia. and the stroke is 4" what is the ...

physics

Stuck on this homework problem, any help would be appreciated. Thank you!! A truck has 5.9L diesel engine in it. 5.9L of the overall displacement in 6 cylinders each 102mm bore (diameter) and 120mm stroke (length). Engine operates at 16.3:1 compression ratio and with 6psi (0....

Engines

How do i find total displacement in in^3/min if i have the bore and stroke and and rpm and number of cylinder. i can calculate piston and engine displacement and compression ratios but just not sure about TOTAL displacement and the rpms?

math

A truck has 5.9L engine in it. 5.9L of the overall displacement in 6 cylinders each 102mm bore (diameter) and 120mm stroke (length). Engine operates at 16.3:1 compression ratio and with 6psi (0.41atm) of boost cruising at 1600rpm. What is the volume of ONE cylinder? Then add 6...

Chemistry

A truck has 5.9L diesel engine in it. 5.9L of the overall displacement in 6 cylinders each 102mm bore (diameter) and 120mm stroke (length). Engine operates at 16.3:1 compression ratio and with 6psi (0.41atm) of boost cruising at 1600rpm. 1.) The air mixture has an average ...

chemistry

During which stroke of a four-stroke internal combustion engine is work done to the system of gases? A. Exhaust stroke B. Intake stroke C. Compression stroke D. Power stroke

Chem

During which stroke of a four-stroke internal combustion engine is the system's temperature raised because work is done to the gases? A. Compression stroke B. Power stroke C. Exhaust stroke D. Intake stroke

physics

A reciprocating compressor is a device that compresses air by a back-and-forth straight-line motion, like a piston in a cylinder. Consider a reciprocating compressor running at 150 rpm. During a compression stroke, 1.30 mol of air is compressed. The initial temperature of the ...

chemistry

1. Ideal gas particles: A. have no mutual attraction and no individual volume. B. have no mass or volume. C. have no odor and no color. D. have no density and do not form bonds. Is it A? 2. Why does the density of gas in a hot air balloon decrease as the gas is heated? A. The ...

physics - engine

A car V8 has a bore of 4 in. and a stroke of 2.5 in., what is the engine size?

physics

In a diesel engine, the piston compresses air at 302 K to a volume that is 0.0628 of the original volume and a pressure that is 48.2 times the original pressure. What is the temperature of the air after the compression? Ok I know I have the temputure of the engine but how do i...

Automotive engine parts and operation

plz help me w/ the answers i have n tell me if i'm wrong. 1. An automotive engine's camshaft rotates at A. the same speed as the crankshaft B. one-quarter the speed of the crankshaft C. one-half the speed of the crankshaft D. twice the speed of the crankshaft my answer c 2. ...

Hydraulics

A cylinder with a 3" bore and a stroke of 16" receives 18 gpm. What is the piston rod velocity?

Physics

A Jaguar XK8 convertible has an eight-cylinder engine. At the beginning of its compression stroke, one of the cylinders contains 499 cm ^ 3 of air at atmospheric pressure (1.01\times 10^5 Pa}) and a temperature of 27.0 degrees C. At the end of the stroke, the air has been ...

AP Physics B (chemistry bit)

I think I'm doing this wrong In an internal combustion engine, air at atmospheric pressure and a temperature of about 20 degrees celcius is compressed in the cylinder by a piston to 1/9 of its original volume (compression ratio = 9.0). Estimate the temperature of the ...

Integrated Physics and Chemistry

In a four-stroke internal combustion engine, the gas vapor/air mixture is pressurized during the ____ stroke. compression power intake exhaust

Physics

A hydraulic lift is used to jack a 780 kg car 15 cm off the floor. The diameter of the output piston is 15 cm, and the input force is 160 N. a)What is the area of the input piston (in m^2)? b)What is the work done in lifting the car 15 cm? c)If the input piston moves 13 cm in ...

physics

A cylinder of gas is compressed by a piston from an initial volume of 125litres to a final volume of 90 litres.The compression occurs at constant pressure,and the work done on the gas by the piston is 10^4J.What is the gas pressure during the compression?

hvac

gas trapped in a reciprocating piston compressors clearance space expands at the beginning of the suction stroke what effect does this have on the system

chem

What happens during the intake stroke of a four-stroke internal combustion engine? A. The piston moves downward, creating a partial vacuum that draws in air and fuel. B. The piston moves downward as a result of the air/fuel mixture doing work on it. C. The piston moves upward...

physics

A piston of a car engine executes a simple harmonic motion. the acceleration a of the piston is related to its displacement x by the equation: a = -6.4*10^5x a) Calculate the frequency of motion b) The piston has a mass of 700 gms & a max displacement of 8 cm. Calculate the ...

physics help please!

The motion of a piston in an auto engine is simple harmonic. The piston travels back and forth over a distance of 23 cm, and the piston has a mass of 1.7 kg. 2515 rpm 23 cm max speed of the piston 30.28757 m/s What is the maximum force acting on the piston when the engine is ...

physics

A cylinder of gas is compressed by a piston from an intial volume of 125 litres to a final volume of 90 litres.The compression occurs at constant pressure and work done on the gas by the piston is 10^4J.What is the gas pressure during compression

Physics (forgot to post this question #2)

During the compression stroke of a certain gasoline engine, the pressure increases from 1.00atm to 20.0atm. If the process is adiabatic and the fuel air mixture behaves a a diatomic ideal gas a) by what factor does the volume change b) by what factor does the temperature ...

Physics

In a diesel engine, the piston compresses air at 305 K to a volume that is 0.0624 of the original volume and a pressure that is 48.5 times the original pressure. What is the temperature of the air after the compression?

Physics

In a diesel engine, the piston compresses air at 302 K to a volume that is 0.0628 of the original volume and a pressure that is 48.2 times the original pressure. What is the temperature of the air after the compression? Can anyone help me work this problem?

Physics

In a diesel engine, the piston compresses air at 302 K to a volume that is 0.0628 of the original volume and a pressure that is 48.2 times the original pressure. What is the temperature of the air after the compression? I have no idea can anyone help?

physics

A locomotive is running at a constant speed of 100 km/ h. The diameter of driving wheels is 1.8 m. The stroke of the piston of the steam engine cylinder of the locomotive is 600 mm. Find the centripetal acceleration of the crank pin relative to the engine frame.

physics

A locomotive is running at a constant speed of 100 km/ h. The diameter of driving wheels is 1.8 m. The stroke of the piston of the steam engine cylinder of the locomotive is 600 mm. Find the centripetal acceleration of the crank pin relative to the engine frame??

physics

A locomotive is running at a constant speed of 100 km/ h. The diameter of driving wheels is 1.8 m. The stroke of the piston of the steam engine cylinder of the locomotive is 600 mm. Find the centripetal acceleration of the crank pin relative to the engine frame

Physics

An aircraft piston engine starts from rest and accelerates to 1500rpm in 4.95s. This engine through a reduction gearbox drives a 9m diameter propeller at 55rpm What is the engine's angular displacement in 4.95s?

physic

A diesel engine works at a high compression ratio to compress air until it reaches a temperature high enough to ignite the diesel fuel. Suppose the compression ratio (ratio of volumes) of a specific diesel engine is 24 to 1. If air enters a cylinder at 1 atm and is compressed ...

physics

A diesel engine works at a high compression ratio to compress air until it reaches a temperature high enough to ignite the diesel fuel. Suppose the compression ratio (ratio of volumes) of a specific diesel engine is 19 to 1. If air enters a cylinder at 1 atm and is compressed ...

physics

A diesel engine works at a high compression ratio to compress air until it reaches a temperature high enough to ignite the diesel fuel. Suppose the compression ratio (ratio of volumes) of a specific diesel engine is 19 to 1. If air enters a cylinder at 1 atm and is compressed ...

physics

A diesel engine works at a high compression ratio to compress air until it reaches a temperature high enough to ignite the diesel fuel. Suppose the compression ratio (ratio of volumes) of a specific diesel engine is 19 to 1. If air enters a cylinder at 1 atm and is compressed ...

Theory of machines

A locomotive is running at a constant speed of 100 km/ h. The diameter of driving wheels is 1.8 m. The stroke of the piston of the steam engine cylinder of the locomotive is 600 mm. Find the centripetal acceleration of the crank pin relative to the engine frame.

physics

In a diesel engine, the piston compresses air at 302 K to a volume that is 0.0628 of the original volume and a pressure that is 48.2 times the original pressure. What is the temperature of the air after the compression? I know pv = nRT, but I don't know how to use this fromula...

Physics

A cylinder of gas is compressed by a piston from an initial volume of 125 liters to a final volume of 90 liters. The compression occurs at constant pressure, and the work done on the gas by the piston is 104 joules. What is the gas pressure during the compression? (1 liter = ...

physics

A hand-driven tire pump has a 2.50 cm diameter piston and a maximum stroke of 31.0 cm. (a) How much work do you do in one stroke if the average gauge pressure is 2.40 multiplied by 105 N/m2 (about 35 psi)? (You may consider this an isothermal process.) (b) What average force ...

physics

A piston in a car engine has a mass of 0.75 kg and moves with motion wich was approximately simple harmonic. If the amplitude of zis oscillation is 10 cm and z max. safe operating speed of z engine is 6000 rev. per min. Calculate: a. Max acceleration of z piston b. Max.speed ...

calculus

The mechanics at lincoln automotive are reboring a 6-in. deep cylinder to fit a new piston. The machine they are using increases the cylinder's radius 0.02 inches each second. How rapidly is the cylinder volume increasing when the bore (diameter) is 3.8 in.?

physics

A hand-driven tire pump has a 2.50 cm diameter piston and a maximum stroke of 31.0 cm. (a) How much work (J) do you do in one stroke if the average gauge pressure is 2.40 multiplied by 105 N/m2 (about 35 psi)? (You may consider this an isothermal process.) (b) What average ...

Math

Mechanics are reboring a 6in deep cylinder to fit a new piston. The machine they are using increases the cylinders radius one-thousandths of an inch every 3 min. How rapidly is the cylinder volume increasing when the bore is 3.800 in.?

Thermodynamics/ Energy

Determine the effects of compression ratio on the net work output and the thermal efficiency of the Otto cycle for a maximum cycle temperature of 2000 K. Take the working fluid to be air that is at 100 kPa and 300 K at the beginning of the compression process, and assume ...

Physical Education

Preliminary design of a compressor drive train Determine the force-time function within the compressor’s cylinder and the torque-time function acting on the input shaft on the compressor during any cycle. Given: Compressor speed is 1500rpm. The compressor has a bore of 3.125...

Integrated Physics and Chemistry

In an internal combustion engine, the gas vapor/air mixture enters the cylinder during the ____ stroke. A)intake B)compression C)power D)exhaust

ThermoPhysics

During the compression stroke of a certain gasoline engine, the pressure increases from 1.00 atm to 20.5 atm. The process is adiabatic and the air–fuel mixture behaves as a diatomic ideal gas. (a) By what factor does the volume change? Vfinal = Vinitial (b) By what factor ...

Physics

arnot’s engine with air as working substance is initially at 3270C and pressure of 12 atmospheres. The volume is one litre to start with. The expansion or compression ratio is 1:6. Find the lowest temperature and efficiency. (γ= 1.4)

Physics

A carnot’s engine with air as working substance is initially at 3270C and pressure of 12 atmospheres. The volume is one litre to start with. The expansion or compression ratio is 1:6. Find the lowest temperature and efficiency. (γ= 1.4)

science

An ideal gas for which Cv = 3R/2 is the working substance of a Carnot engine. During the isothermal expansion, the volume doubles. The ratio of the final volume to the initial volume in the adiabatic expansion is 5.7. The work output of the engine is 9 x 105 J in each cycle. ...

Finance

Michigan Corporation purchased a new truck on January 1, 2013 for $55,000 cash. Michigan estimated salvage value of $10,000 at the end of the useful life of 5 years. On January 1, 2015 Michigan had to replace the engine of the truck paying $4,500 cash. Due to the replaced ...

advance physics

A carnot’s engine with air as working substance is initially at 3270C and pressure of 12 atmospheres. The volume is one litre to start with. The expansion or compression ratio is 1:6. Find the lowest temperature and efficiency. (γ= 1.4)

science

PLEASE HELP GUYS An ideal gas for which Cv = 3R/2 is the working substance of a Carnot engine. During the isothermal expansion, the volume doubles. The ratio of the final volume to the initial volume in the adiabatic expansion is 5.7. The work output of the engine is 9 x 105 J...

Physics

The motion of a piston in an automobile engine is nearly simple harmonic. If the 1-kg piston travels back and forth over a total distance of 10.0 cm, what is its maximum speed when the engine is running at 3 000 rpm? The answer is 15.7 m/s but I don't understand how to get there.

Physics

In a machine shop, a hydraulic lift is used to raise heavy equipment for repairs. The sys- tem has a small piston with a cross-sectional area of 0.063 m2 and a large piston with a cross-sectional area of 0.172 m2. An engine weighing 2800 N rests on the large piston. What force...

chemistry

An engine goes through the following cycle with 2.60 moles sample of a diatomic gas. I. an isothermas expansion from point a to point b. II. a constant pressure compression from point b to point c. III. an adiabatic compression from point c to point a. We are given point a has...

Physics

The piston in a particular car engine moves in approximately simple harmonic motion with an amplitude of 8 cm. The mass of the piston is 8 kg and the piston makes 100 oscillations per second. Calculate: a) the maximum value if the acceleration of the piston. b) the force ...

Engineering/Physics

When gasoline is burned in the cylinder of an​ engine, it creates a high pressure that pushes on the piston. If the pressure is 150 ​pound-force per square​ inch, and it moves the 3​-inch diameter piston a distance of 6 centimeters in 0.1 ​seconds...

physics

In a hydraulic piston set up, one circular piston has a diameter of 2 cm,while the other piston has a diameter of 6cm. Calculate the ratio of the force exerted by the larger piston to the force applied to the smaller piston?

engineering

in a hydralic jack 1:5 ratio piston diameter,and we apply a fofce of 25kg,what can it lift.

physics

An engine of mass 5000 kg pulls a train of ten trucks each of mass 2000 kg along a horizontal track. Assume that the frictional forces to be 5000 N and that the engine exerts a force of 50 000 N on the rails. If the trucks are numbered from 1 to 10 starting with the one next ...

physics

A golfer takes three strokes to get the ball into the hole once he is on the green. The first stroke displaces the ball 12 ft. north, the second stroke 6.0 ft. southeast, and the third stroke 3.0 ft. southwest. What displacement was needed to get the ball into the hole on the ...

vector

A golfer takes three strokes to get the ball into the hole once he is on the green. The first stroke displaces the ball 12 ft. north, the second stroke 6.0 ft. southeast, and the third stroke 3.0 ft. southwest. What displacement was needed to get the ball into the hole on the ...

Math

The position of a car piston within the cylinder is described by the equation: y = S sin(360 r t - 90 Where S is the stroke length of the cylinder, r is the rpm of the crank shaft, and t is the time in minutes. If the stroke length is 2 inches and the crank shaft is running at...

physics

An Otto engine has a maximum efficiency of 33.1 %; find the compression ratio. Assume that the gas is diatomic.

Math

a pair of $90 shoes goes on sale for 35% off and then goes on the clearance rack for an additional 10% off. a customer walks in with a 20% off coupon good on all clearance items and buys the shoes. How much did the customer pay for the shoes? and the price paid was what ...

Physics

Conventional engines ignite their fuel by using the spark from the spark plug. But in a diesel engine, the air enthers the chamber at the temperature of the atmosphere and is compressed by the piston until it reaches 550 degrees Celsius, at which time the fuel is injected itno...

physics

Conventional engines ignite their fuel by using the spark from the spark plug. But in a diesel engine, the air enthers the chamber at the temperature of the atmosphere and is compressed by the piston until it reaches 550 degrees Celsius, at which time the fuel is injected itno...

Physics

an empty truck weighs 4000N its engine can produce an accelerationof 1m/sif the truck is loaded with 2000N, find the acceleration the engine can prodeuce?

Physics

A man uses a lever jack to lift a 2.00 × 10^3 kg car to change a tire. Each stroke of the jack lifts the car a distance of 5.00 × 10^(-3) m. The vertical displacement of the handle is 0.75 m for each stroke. How much total force does he use with each stroke of the jack? A. 3...

physic

A hand-driven tire pump has a piston with a 2.50 cm diameter and a maximum stroke of 30 cm. how much work do you do in one stroke if the average gauge pressure is 2.40×105 N.m – 2? Select one: a. 141 J b. 4.5×107 J c. 35.3 J d. 1.41 ×108 J

chemistry

A spark plug fires before the gases in a cylinder are fully compressed. How will the engine be affected? A. The engine will get better gas mileage as less fuel is burned during each cycle. B. There will be fewer pollutants as the fuel has more time to burn. C. The gases will ...

chemistry

A spark plug fires before the gases in a cylinder are fully compressed. How will the engine be affected? A. The engine will get better gas mileage as less fuel is burned during each cycle. B. There will be fewer pollutants as the fuel has more time to burn. C. The gases will ...

chemistry

A spark plug fires before the gases in a cylinder are fully compressed. How will the engine be affected? A. The engine will get better gas mileage as less fuel is burned during each cycle. B. There will be fewer pollutants as the fuel has more time to burn. C. The gases will ...

system analysis in transportation INTRODUCTION TO

TruckCo manufactures two types of trucks: 1 and 2. each truck must go through the painting shop and assembly shop. if the painting shop were completely devoted to painting type 1 truck, 800 per day could be painted, whereas if the painting shop were completely devoted to ...

Public High School AP Physics B

Ok I got a question I'm confused by the compression ratio bit in this problem and don't know how to do it If 3.00 m^3 of a gas initally at STP is placed under a pressure of 3.20 atm, the temperature of the gas rises to 38.0 degrees C. What is the volume? I did this p1V1/T1 = ...

Chemistry

A spark plug fires before the gases in a cylinder are fully compressed. How will the engine be affected? A. The engine will get better gas mileage as less fuel is burned during each cycle. B. There will be fewer pollutants as the fuel has more time to burn. C. The gases will ...

URGENT HELP: calculus - limits at inifinity

1.The efficiency of an internal combustion engine is: efficiency (%) = 100 [1 - (1/(x/y)^c)] where x/y is the ratio of the uncompressed gas to the compressed gas and C is a positive constant dependent on the engine design. Find the LIMIT of the efficiency as the compression ...

chem

Air trapped in a cylinder fitted with a piston occupies 162.2 mL at 1.08 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 25%?

Chemistry

Air trapped in a cylinder fitted with a piston occupies 163.1 mL at 1.08 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 25%?

physic

Given: Compressor speed is 1500rpm. The compressor has a bore of 3.125 in, a stroke of 3.26in and a connecting rod crank ratio to 3.5. Inlet pressure is atmospheric 14.7 psia, peak cylinder pressure is 132psia, and mean active pressure mep is 26psia. Flow is 8.9 cfm at mep, ...

HVAC

A gas is compressed inside a compressors cylinder. When the piston is at its bottom dead center , the gas is initially at 10 psig , 65 degree and 10.5 in. After compression and when the piston is at top dead center the gas is 180 degree and occupies 1.5 in. What would be the ...

civil engineering

For a soil with significant secondary compression, if the duration of each loading increments is lengthened to a few days, what would be the effects on the void ratio vs. Log p curve and the preconsolidation pressure?

chem

Air trapped in a cylinder fitted with a piston occupies 162.2 mL at 1.08 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 25%? what is the answer? didnt understand?

science

I have made a thermometer which measures temperature by the compressing and expanding of gas in a piston. I have measured that at 100 degrees C the volume of the piston is 20 L. What is the temperature outside if the piston has a volume of 15 L? What would be appropriate ...

Engineering Science N4

The diameter of the ram cylinder of a hydraulic press is 200mm. The stroke length of the plunger is 50mm. the effort on the plunger is 5% of the load. Calculate, i) the volume of the liquid needed per stroke if the load has to be lifted 60mm in 30 strokes, if the slip is ...

physics

An outboard motor for a boat is cooled by lake water at 16.0°C and has a compression ratio of 13.3. Assume that the air is a diatomic gas. a) Calculate the efficiency of the engine's Otto cycle. b) Using your answer to part (a) and the fact that the efficiency of the Carnot ...

physics

An outboard motor for a boat is cooled by lake water at 16.0°C and has a compression ratio of 13.3. Assume that the air is a diatomic gas. a) Calculate the efficiency of the engine's Otto cycle. b) Using your answer to part (a) and the fact that the efficiency of the Carnot ...

Maths A Year 12

Four years ago, an art collector bought a painting for $32 500. He knows that this painting appreciates at 15% a year. What is this painting worth now, to the nearest $100?

math for managers

Cost analysis Te owner of a small construction busi-ness needs a new truck. He can buy a diesel truck for $38,000 and it will cost him $0.24 per mile to operate. He can buy a gas engine truck for $35,600 and it will cost him $0.30 per mile to operate. Find the number of miles ...

physics

An automobile having a mass of 1750 kg is placed on a hydraulic lift in a garage. The piston lifting the car is 0.244 m in diameter. A mechanic attaches a pumping mechanism to a much smaller piston, 1.50 cm in diameter, which is connected by hydraulic lines to the lift. She ...

Physics AP

In the process from point b to point c, the gas in the engine is heated to a higher temperature. As the gas is heated, it expands pushing the syringe piston up. Let's assume that this process is isobaric. The temperature of the gas at point b is 20.2 ° C, and the gas ...

physics

1.00L piston with 1.00 mole of an ideal gas at 298.0K and 1.00bar is isothermally and reversibly compressed to a final volume of 0.200L, the irreversibly expanded in first step to its original volume with an applied pressure of 1.00bar. Calculate the change in heat for the ...

physics

A construction worker riding in the tray of a truck traveling at 10 m/s, sees one of his friends passing and decides to jump off the truck. The magnitude of his initial speed of jumping is: (a) zero (b) Less than the truck's (c) Equal to that of the truck (d) Greater than that...

math

a movng company wants to buy a new type of truck and needs to know the volume of the storage compartent before they can decide if they should purchase the truck. What is the volume of the storage compartment? 10ft, 18ft, 8ft, 2ft, 15ft.

chemistry

if i have 5.6 liters of gas in a piston ata pressure of 206 kPa and compress the gas until its volume is 4.8L, what will the new pressure inside the piston be? how do i that problem?

Physics Homework

Could you please check my answers? Thanks! 1. You push a heavy car by hand. The car, in turn, pushes back with an opposite but equal force on you. Doesn’t this mean the forces cancel one another, making acceleration impossible? Why or why not? -No, because in order to ...

Please help asap science

1.an engine develops 65kW over a period of 20minutes. The engine uses 5kg of petrol. Calculate the following:- A. The heat gegenerated B. The power generated by the petrol C. The efficiency Of the engine 2.A square steel plate with sides of 12cm long, is heated and the change ...

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. 21
  22. 22
  23. 23
  24. 24
  25. 25
  26. 26
  27. 27
  28. 28
  29. 29
  30. 30
  31. 31
  32. 32
  33. 33
  34. 34
  35. 35
  36. 36
  37. 37
  38. 38
  39. 39
  40. 40
  41. 41
  42. 42
  43. 43
  44. 44
  45. 45
  46. 46
  47. 47
  48. 48
  49. 49
  50. 50
  51. 51
  52. 52
  53. 53
  54. 54
  55. 55
  56. 56
  57. 57
  58. 58
  59. 59
  60. 60
  61. 61
  62. 62
  63. 63
  64. 64
  65. 65
  66. 66
  67. 67
  68. 68
  69. 69
  70. 70
  71. 71
  72. 72
  73. 73
  74. 74
  75. 75
  76. 76
  77. 77
  78. 78
  79. 79
  80. 80
  81. 81
  82. 82
  83. 83
  84. 84
  85. 85
  86. 86
  87. 87
  88. 88
  89. 89
  90. 90
  91. 91
  92. 92
  93. 93
  94. 94
  95. 95
  96. 96
  97. 97
  98. 98
  99. 99
  100. 100