if a student doing an experiment failed to dry the KHP before using it to standarize the NaOH solution. A) Would her calculated molarity of the NaOH solution probably be too hight or too Low?

115,822 results

Chm General 2

if a student doing an experiment failed to dry the KHP before using it to standarize the NaOH solution. A) Would her calculated molarity of the NaOH solution probably be too hight or too Low?

Chemistry

The Question Is: "A student weighs 0.347 g of KHP on a laboratory balance. The KHP was titrated with NaOH and the concentration of the NaOH determined to be 0.110 M. For the second titration, the student correctly diluted 6 M HCl from the reagent shelf using a graduated ...

College Chemistry

"A student weighs 0.347 g of KHP on a laboratory balance. The KHP was titrated with NaOH and the concentration of the NaOH determined to be 0.110 M. For the second titration, the student correctly diluted 6 M HCl from the reagent shelf using a graduated cylinder to obtain ...

College Chemistry

The Question Is: "A student weighs 0.347 g of KHP on a laboratory balance. The KHP was titrated with NaOH and the concentration of the NaOH determined to be 0.110 M. For the second titration, the student correctly diluted 6 M HCl from the reagent shelf using a graduated ...

AP CHEMISTRY HELP

a) A student fails to wash the weighing paper when transferring the KHP sample into the beaker. What effect does this error have on the calculated molarity of the NAOH solution? Mathematically justify your answer. b) A student failed to notice an air bubble trapped in the tip ...

chemistry

Titration was used to determine the molarity of acetic acid in vinegar. A primary standard solution of KHP was used to standardize the NaOH. 1. When performing this experiment, impure KHP was used to standardize the NaOH solution. If the impurity is neither acidic or basic, ...

chemistry

If the stockroom fails to dry the KHP to remove the waters of hydration, the student's calculated concentration for the standardized base will be: ____________ (low, high, or unaffected) A drop of NaOH is hanging from the buret tip before the titration of KHP. Once the student...

Chemistry 1111

To determine the molarity of NaOH solution, student took 3.5 g of KHP (KHP – Potassium hydrogen phthalate; Molar mass = 204.22 g/mol) and dissolved in 50 mL of water and titrated with the given unknown molarity NaOH solution loaded in burette. His burette volume read 1.85 mL...

chemistry

HCL is tritrated with NaOH. KHP is then added. A possible source of systematic error in this experiment is failure to dry the KHP. If this occured, would the final wt% NA2CO3 be falsely high, falsely low, or unaffected. Give reasoning. Thanks. You have left out much of the ...

chemistry

2. When preparing a NaOH solution, a student did not allow the NaOH pellets to completely dissolve before standardizing the solution with KHP. However, by the time the student refilled the buret with NaOH to titrate the acetic acid, the remaining NaOH pellets had ...

Chemistry

If a student used 11.54mL of their NaOH solution to neutralize 10.00mL of a 0.445M KHP solution, then what is the concentration of the student's NaOH solution (in Molarity)?

chemistry

KHP is a monoprotic acid with a molar mass of 204.22 g/mol. The titration data are as following. The average concentration of NaOH solution is M. 1 2 3 mass of KHP (g) 2.789 2.543 2.612 vol NaOH used (mL) 27.77 23.22 27.12 You didn't ask a question but I assume you are to ...

chemistry

1. When performing this experiment, a student mistakenly used impure KHP to standardize the NaOH solution. If the impurity is neither acidic nor basic, will the percent by mass of acetic acid in the vinegar solution determined by the student be too high or too low? Justify ...

CHM general 2

Indicated whether the calculated molarity of NaOH would be lower or higher Than the real value; or unaffected? a) the water of the NaOH solution is not boiled and cooler before the solution is prepared b) The buret, wet with water, is not rinsed with NaOH solution before filling

Chemistry

Titration was used to determine the molarity of acetic acid in vinegar. A primary standard solution of KHP was used to standardize the NaOH. 1. When performing this experiment, impure KHP was used to standardize the NaOH solution. If the impurity is neither acidic or basic, ...

science-chemistry

We performed a titration with NaOH solution with KHP. Now I need to calculate the average molarity of NaOH based on this data Weight of khp= 0.1083 g Volume of naoh = 6.4 ml Then if i get this how do i get the molarity of ch3cooh totrated in naoh with the data Volume of ...

Chemistry

A standard KHP solution is made by dissolving 2.12 grams of KHP in 100.00 mL of water. The KHP solution is then titrated with NaOH solution. It takes 23.12 mL of NaOH to reach the endpoint. What is the concentration of the NaOH?

Chemistry

In this experiment NaOH is standardized to find out the percent by mass of the acetic acid in a sample of vinegar. A student had not allowed the NaOH pellets to dissolve completely before standardizing it with KHP, but when the student refilled the buret with NaOH to titrate ...

chemistry

If the stockroom fails to dry the KHP to remove the waters of hydration, the student's calculated concentration for the standardized base will be (low, high, or unaffected) A drop of NaOH is hanging from the buret tip before the titration of KHP. Once the student begins the ...

chemistry

If the stockroom fails to dry the KHP to remove the waters of hydration, the student's calculated concentration for the standardized base will be (low, high, or unaffected) A drop of NaOH is hanging from the buret tip before the titration of KHP. Once the student begins the ...

Chemistry

determine the approximate molarity of a solution of NaOH prepared by diluting 10ml of 6M NaOH to a volume of 400 ml. using the solution in the first part, 24.5ml of NaOH solution was required to neutralize 26.4ml of a .150M HCl solution. find the molarity of NaOH

chemistry

how do i calculate the NaOH molarity from a titration of KHP and NaOH after preparing KHP to standardise NaOH. KHP mass was 2.0378g dissoveld in distilled water to fill up a 100ml volumetric flask and only 10ml of this solution was used to in titration

chemistry

When filling the buret with NaOH solution, you left an air bubble in the buret tip. The bubble was released durning your first KHP titration. Would the following technique error result in an erroneously high or reeoneously low calculated molarity of NaOH solution? explain ...

Chemistry

Calculate the theoretical amount of .5M NaOH that it would take to neutralize approx. 2.0 g KHP. KHP is a monoprotic acid, the molar mass of KHP is 204.22 g/mol and the molar mass of NaOH is 40.00 g/mol. Answer in terms of mL. I converted g KHP to mols, then mols of KHP to ...

chem 111 lab

if a student used 12.45mL of their NaOH solution to neutralize 10.00mL of a 0.543 KHP solution, then what is the concentration of the student's NaOH solution?

Chemistry

How does dissolved CO2 in distilled water affect the accuracy of the determination of a NaOH solution's concentration? How is the term acid anhydride applied here? I know you had answered this already, but what if KHP is used to titrate the NaOH. In this experiment KHP was ...

chemistry

A 0.8743 g sample of KHP was titrated 42.45-mL of NaOH solution until the phenolphthalein endpoint. What is the molarity of the NaOH solution?

Chemistry (molarity) (sorta an emergency)

I'm doing a titration lab and writing a lab report where I'm sort of stuck on how exactly to find the concentration of HCl. These are the following info I have from the lab, Equation: HCl(aq)+NaOH(aq)-> H2O(l)+NaCl(aq) -Calculated molarity of NaOH solution is .103M -Volume ...

Chem 2068 lab

Once I have the molarity for KHP which is 0.0027 M, and i add 14.48 mL of NaOH to the solution, what is the concentration of NaOH in the solution.

chemistry

A student weighs out 0.568 g of KHP (molar mass = 204 g/mol) and titrates to the equivalence point with 36.78 mL of a stock NaOH solution. What is the concentration of the stock NaOH solution? KHP is an acid with one acidic proton. a. 3.15 M b. 0.0757 M c. 0.943 M d. 0.100 M e...

Chem Question

What is the molarity of a NCL solution if 37.50 mL of the acid is needed to neutralize 25.00 mL of 0.0725 M NaOH? I'm not quite sure how to go about doing this one. And also this one thing. The following technical errors were committed in standardizing the NaOH. What will be ...

Chemistry

The student used the KHP in a subsequent titration experiment where he titrated 25.00 +/- 0.03 ml of the acid against an unknown solution of NaOH. The titration required 23.70 +/- 0.10 ml of the base. What is the concentration of NaOH?

College Chemistry

I need help with this question!! a sample of pure KHP weighing .8097g dissolved in water and titrated with 40.25 mL of NaOH solution. The same NaOH solution was used to titrate a solution of a weak diprotic acid H2X. A sample of 0.18694g of the weak acid was first dissolved in...

Chemistry

For a chemistry lab the experiment was to carry out an acid-base titration to determine the exact concentration of a sodium hydroxide solution. Two trials were completed and the data collected was: mass of weighing paper, mass of weighing paper + KHP, mass of KHP, initial ...

Chem.

To standardize a solution of NaOH, one uses a primary standard called potassium hydrogen phthalate (KHP). It is a monoprotic acid. It has a molar mass of 204.33g/mol. Suppose you weigh out .556g of KHP and dissolve it in water. It requires 14.48 mL of NaOH to reach the ...

chemistry

if 5.105 gm of KHP (Mwt=204.2)was dissolved in 250 ml,10.70 ml of this solution of KHP was titrated with 10.0 ml of NaOH . Calculate the concentration of NaOH solution

General Chemistry

"How would you prepare 150. mL of 0.1M sodium hydroxide given a stock solution of 3.0M NaOH?" I made calculations and figured the process would be to dilute 5 mL of the 3.0M NaOH to 150. mL. Is this correct? For the ideal 150. mL of 0.1M NaOH, I calculated there to need .015 ...

chemistry

For an experiment, a student needs 1L each of 2M NaOH and 2 M KCl solutions. The NaOH will be prepared from a 12M stock solution, whereas the KCl will be prepared from dry, powder,KCl. Describe the process by which each of the solutions can be prepared. Include: Mention of ...

chemistry 101

If 15g of NaOh is dissolved in 285 g of water, calculate the following. Assume the density of the solution is 1.06 g/cc. a) Calculate the moles of NaOH in the solution? My answer is 15gNaOH/40g NaOH= .0375 mole NaOH b) Waht is the mass % w/w of the solution? My answer is 15g ...

chemistry help asap

Please check these thanks. 1. In a titration, 33.21 mL 0.3020M rubidium hydroxide solution is required to exactly neutralize 20.00 mL hydrofluroic acid solution. What is the molarity of the hydrofluroic acid solution? Answer: 0.502HF 2. A 35.00 mL-sample of NaOH solution is ...

College Chemistry

A student weighs out 0.568 g of KHP (molar mass=204g/mol) and titrates to the equivalence point with (36.78 cm cubed which is 3) of a stock NaOH solution. What is concentration of stock NaOH solution? KHP is an acid with one acidic proton. The word cubed is in word form ...

acid-base titrations

For each of the following circumstances, indicate whether the calculated molarity of NaOH would be lower, higher or unaffected. Explain your answer in each case. a.the inside of the pipet used to transfer the standard HCI solution was wet with water. b.You added 40mL of water ...

chemistry

calculate the mass of NaOH neded to prepare 500mL of a 0.10 M solution. I'm pretty sure the answer is 2g, but how do I get to that? Another question: calculate the molar amount of KHP used to neutralize the NaOH solution. .51 g of KHP was added to 50 mL of distilled H2O and a ...

College Chemistry

1) A 25mL sample of the .265M HCI solution from the previous question is titrated with a solution of NaOH. 28.25mL of the NaOH solution is required to titrate the HCl. Calculate the molarity of the NaOH solution. 2) A 1.12g sample of an unknown monoprotic acid is titrated with...

chemistry

If the 12.5ml of NaOH solution is required to react completely with 0.300g of KHP (Potassium Hydrogen Phthalate, 204.2g/mol). What is the molarity of NaOH?

Chemistry

Rearrange the titration calculation to find Mb in a solution. If I put 13.2 mL of NaOH and 0.3 mL of phenolphthalein in 25 mL of KHP, what is the Mb of the solution? The original solution of NaOh is 100 mL and is composed of 1.069e-15 moles of H+, 9.445e-2 moles of OH-, and 9....

chemistry

three student chemists measured 50.0 mL of 1.00 M NaOH in separate Styrofoam "coffee cup" calorimeters ( Part B). Brett added 50.0 mL of 1.10 M HCI to his solution of NaOH; Dale added 45.5 mL of 1.10 m HCL 9 eqaul moles) to his NaOH solution. Lyndsay added 50.0 mL of 1.00 m ...

Chemistry

If there are 10 groups performing an experiment and each group needed 25.0 mL of 0.250 M NaOH, how would you prepare the NaOH solution for the whole lab using the NaOH pellets?

chem 1

a NaOh solution has a concentration of about 0.11M.How many grams of KHP would have to be used to require NaOH solution to reach the endpoint

chemistry

a student dissolves 0.625 g of pure benzoic acid in distilled water and titrated the resulting solution to the equivalence point using 40.8 mL of the standardized NaOH solution from Part a, assuming that benzoic acid has only one ionizable hydrogen, answer the following: ...

Chem

a solution of sodium hydroxide is standardized against potassium hydrogen phthalate (KHP, formula weight 204.2 g/mol). From the following data, calculate the molarity of the NaOH solution: mass of KHP 1.054 g; buret reading before tiltration 0.33 mL; buret reading after ...

AP Chemistry

A solution of sodium hydroxide is standardized against potassium hydrogen phthalate (KHP, formula weight 204.2 g/mol). From the following data, calculate the molarity of the NaOH solution: mass of KHP 1.234 g; buret reading before titration 0.23 mL; buret reading after ...

CHEMISTRY

a solution of sodium hydroxide is standardized against potassium hydrogen phthalate (KHP, formula weight 204.2 g/mol). From the following data, calculate the molarity of the NaOH solution: mass of KHP 1.404 g; buret reading before titration 0.13 mL; buret reading after ...

AP chemistry

A solution of sodium hydroxide is standard- ized against potassium hydrogen phthalate (KHP, formula weight 204.2 g/mol). From the following data, calculate the molarity of the NaOH solution: mass of KHP 1.894 g; buret reading before titration 0.13 mL; buret reading after ...

Chemistry

A solution of sodium hydroxide is standard- ized against potassium hydrogen phthalate (KHP, formula weight 204.2 g/mol). From the following data, calculate the molarity of the NaOH solution: mass of KHP 1.654 g; buret reading before titration 0.23 mL; buret reading after ...

chemistry

A solution of sodium hydroxide is standard- ized against potassium hydrogen phthalate (KHP, formula weight 204.2 g/mol). From the following data, calculate the molarity of the NaOH solution: mass of KHP 1.744 g; buret reading before titration 0.13 mL; buret reading after ...

ap chemistry

please explain titration problems. I'm a total noob at this and am trying to answer some prelab questions. Examples: 1. How many mL of a 0.800 M NaOH solution is needed to just neutralize 40 mL of a 0.600 M HCl solution? 2. You wish to determine the molarity of a solution of ...

Chemistry (molarity)

What would the effect on your molarity of NaOH be if you had added 35 mL of water to dissolve the KHP (acid) instead of 25 mL? Explain. My answer so far is that adding more water shouldn't affect the molarity at all because water does not account for the reaction between NaOH ...

chemistry

A student prepares a solution of hydrochloric acid that is approximately 0.1 M and wanted to determine its precise concentration. A 25.00 mL portion of the HCl solution is transferred to a flask, and after a few drops of indicator are added, the HCl solution is titrated with 0...

CHEMISTRY

Not for homework, just practice problems I'm having trouble with. Knowing that one mole of KHP, C8H5O4K, reacts with one mole of NaOH, what mass of KHP is required to neutralize 30.0 mL of the 0.10 M NaOH solution? if 24.5 mL of the 0.10 M NaOH solution is required to reach ...

Chemistry

For a chemistry lab the experiment was to carry out an acid-base titration to determine the exact concentration of a sodium hydroxide solution. Two trials were completed and the data collected was: mass of weighing paper, mass of weighing paper + KHP, mass of KHP, initial ...

Inorganic chemistry

Potassium hydrogen phthalate (molar mass = 204.2g/mol) is used to standardize sodium hydroxide. If 26.37 mL of NaOH(aq) is required to titrate 0.7719g KHP to the equivalence point, what is the concentration of the NaOH(aq) (26.37 mL NaOH)(x) = (1 mol KHP/.7719g KHP)(204.2g KHP...

Chemistry

A student titrated 1.852 g of a mixture containing potassium hydrogen phthalate, KHP....? A student titrated 1.852 g of a mixture containing potassium hydrogen phthalate, KHP, with 0.163 M NaOH solution. She recorded an initial buret reading of 0.84 mL and a final buret ...

Chemistry(Please help!!)

For a chemistry lab the experiment was to carry out an acid-base titration to determine the exact concentration of a sodium hydroxide solution. Two trials were completed and the data collected was: mass of weighing paper, mass of weighing paper + KHP, mass of KHP, initial ...

Chemistry

Hello, I need help with calculations for lab. I prepared excess NaOH and HCL solutions (unknown conc., ~0.1M). Then I standardized my NaOH solution by titrating known amounts of KHP (Potassium hydrogen phthalate)with it in the presence of phenolphthalein (indicator turns pink ...

chemistry

A 2.5 g sample of NaOH (Mw = 40.00) was dissolved in water to give a solution of final volume 250 cm3. (i) With reasons, state whether NaOH is a strong or a weak base. Give the conjugate acid of NaOH and decide whether this conjugate acid is acid, alkaline or neutral. (ii) ...

Chemistry

Calculate the molarity of the H2SO4 solution if 17.45 mL of NaOH was necessary to reach the endpoint of titration. The molarity of the NaOH solution was 0.425 M and 26.30 mL of H2SO4 was added to the Erlenmeyer flask. H2SO4(aq) + 2 NaOH (aq) -----> Na2SO4 (aq) + 2 H2O (l) I...

Science

In an experiment, Tom dissolved 2.125 g of NaOH to make 200.0 mL of aqeous solution. What is the NaOH molarity?

chemistry

The KHP used in the titration with NaOH was contaminated with sodium hydrogen phyhalate (NaHC8H4O4), but you didn't know it. State the effect of the final result (falsely high, falsely low, or unaffected) Explain. thanks These problems must be reasoned through. (1)mols KHP = ...

Chem

A 0.2181 g sample of KHP required 17.29 mL of sodium hydroxide solution to reach the phenolphthalein end point. Calculate the molarity(M) of the NaOH solution.

Chemistry

1)Calculate the number of mL of a 0.095 M NaOH solution required to neutralize 25.0 mL of 0.15 M acetic acid solution 2) Calculate the molarity of a sodium hydroxide solution if 22.0 mL of the sodium hydroxide is required to neutralize 0.50 g of KHP. NaOH(aq)+ KHC8H4O4 -> ...

Chemistry

1)Calculate the number of mL of a 0.095 M NaOH solution required to neutralize 25.0 mL of 0.15 M acetic acid solution 2) Calculate the molarity of a sodium hydroxide solution if 22.0 mL of the sodium hydroxide is required to neutralize 0.50 g of KHP. NaOH(aq)+ KHC8H4O4 -> ...

chemistry

1. if 15.0mL of 4.5 M NaOH are diluted with water to a volume of 500mL, what is the molarity of the resulting solution? 2. in a acid-base titration, 33.65mL of an 0.148 M HCL solution were required to neutralize 25.00mL of a NaOH solution. What is the molarity of the NaOH ...

Inorganic chemistry

mol KHP = (0.7719g)(1 mol KHP/204.2g) = .0038mol Where are the moles of NaOH? I know that there are 0.02637 L of NaOH and I know M = mol/l I know there are 40g NaOH/mol NaOH There is 1 mol of NaOH in the balanced equation But I do not have grams of NaOH

Chemistry

A student determined the H of neutralization of nitric acid (HN03) mixed with NaOH solution, using the procedure described in this experiment. Fifty milliliters of 1.00M HN03 was added to 50.5 mL of 1.00M NaOH solution, and the following time-temperature data were recorded. A ...

Help!!!!!!!!!!!!

A 0.391 g sample of KHP will be titrated with a NaOH solution with an assumed concentration of 0.100 M. Calculate the volume of NaOH that should neutralize the KHP sample.

chemistry

. What would be the molarity of the solution produced when 276 mL of 6.00 M NaOH is combined with 125 mL of a 2.00 M NaOH solution?

Chemistry(Please help, thank you!)

For a chemistry lab the experiment was to carry out an acid-base titration to determine the exact concentration of a sodium hydroxide solution. Two trials were completed and the data collected was: mass of weighing paper, mass of weighing paper + KHP, mass of KHP, initial ...

Chemistry

1.) Watch the animation, and observe the titration process using a standard 0.100 M sodium hydroxide solution to titrate 50.0 mL of a 0.100 M hydrochloric acid solution. Identify which of the following statements regarding acid-base titrations are correct Drag items A-F to: ...

CHEMISTRY

A student needed to standardize a solution of NaOH which was approximately 0.125 M. The student carefully prepared the titration setup, but after 25 mL of NaOH was added, what was the pH of solution if initially flask contains 25 mL of 0.250 M HCl solution?

chemistry

A student needed to standardize a solution of NaOH which was approximately 0.125 M. The student carefully prepared the titration setup, but after 25 mL of NaOH was added, what was the pH of solution if initially flask contains 25 mL of 0.250 M HCl solution?

Chemistry

Consider the titration of 50 mL of 0.250 M HCl with 0.1250 M NaOH. Calculate the pH of the resulting solution after the following volumes of Na OH have been added. a) 0.00 mL b) 50.00 mL c) 99.90 mL d) 100.00 mL e) 100.1 mL The question is, I get, for example, 0.9 pH for "a." ...

Chemistry

In a acid-base titration, 22.81 mL of an NaOH solution were required to neutralize 26.18 mL of a 0.1121 M HCl solution. What is the molarity of the NaOH solution?

chemistry

What is the molarity of the acetic acid if 0.5ml of a vinegar solution has been titrated with the 0.101M solution of NaOH and the volume of the NaOH solution at the equivalence point is 5.0mL?

High school

A 15.00ml of NaoH was titrated to the stoichiometric end point with 17.40ml of 0.23M HCL. What is the molarity of NaoH in the solution?. Calculate the mass of NaoH in 15.00ml solution.[H=1, Cl=35.5, Na=23,O=16].

Chemistry

calculate the molarity of a NaOH solution that requires 42.55 mL to neutralize 3.53 grams of KHP

chemistry

A volume of 100mL of 1.00 M HCl solution is titrated with 1.00 M NaOH solution. You added the following quantities of 1.00 M NaOH to the reaction flask. Classify the following conditions based on whether they are before the equivalence point, at the equivalence point, or after...

Honors Chemistry

If 20 mL of 0.01 M aqueous HCl is required to neutralize 30 mL of an aqueous solution of NaOH, determine the molarity of the NaOH solution. ==> I got 0.01 M NaOH as my answer. Is this correct?

Chemistry

Use the dilution relationship (Mi x Vi = Mf x Vf) to calculate the volume of 0.500 M NaOH needed to prepare 500 mL of .250 M NaOH. This is my work ? L Solution = 500mL x (1L/1000mL) = .500L ? mol NaOH = .500 L Solution x (0.250 M NaOH/1 L Solution) = .125 mol NaOH ? L solution...

Chemistry II

A 12.00 mL sample of sulfuric acid from an automobile battery requires 34.62 mL of 2.42 M sodium hydroxide solution for complete neutralization. What is the molarity of the sulfuric acid? H2SO4 + 2NaOH ==> Na2SO4 + 2H2O molarity NaOH x liters NaOH = mols NaOH. mols H2SO4 = ...

Chemistry 12

Hi, I did the acid-base titration lab with HCl and 0.5M NaOH. I need to calculate the moles of NaOH from molarity of NaOH and the average volume used. My English isn't good but is it asking me to find the moles of NaOH using the molarity of NaOH and the average volume used ...

Chemistry

0.255 g sample of H2C2O4 required 25.70 mL of NaOH to neutralize, what would you report as the molarity of NaOH solution? the reaction is as follows: H2C2O4(aq) +2 NaOH (aq) -> Na2C2O4(aq) +2 HOH (l)

Chemistry

Using Volumetric Glassware to Measure, Dilute,and Titrate Acid Solution 1)For each of the following procedural errors, indicate whether the calculated molarity of the HCl solution would be higher or lower than the actual molarity. Briefly explain. a)The NaOH titrant is ...

Chemistry

Hi everyone, I have been trying to figure out this titration equation all day and for some reason I am stumped. Here is the question in full: Potassium hydrogen phthalate, KHP, can be obtained in high purity and is used to determine the concentrations of solutions of strong ...

chemistry...

knowing that one mole of KHP, C8H5O4K, reacts with one mole of NaOH, what mass of KHP is required to neutralized 30.0mL of the 0.10 M NaOH solution?

chemistry

In a titration experiment, 22.00mL of a NaOH solution are required to neutralize 24.02 mL of a 0.1094 M HCL solution. what is the molarity of H+ in the HCL solution? (same as the molarity of HCL)

chemistry

5.0 mL of H2SO4 solution was titrated with 0.20 M NaOH standard solution. The volume of NaOH needed to reach the equivalent point was 9.5 mL. 1. In this titration setup, what is the titrant? and what is the analyte? 2. What is the number of mole of H2SO4 in the 5.0 mL solution...

Chemistry

One commercial method used to peel potatoes is to soak them in a solution of NaOH for a short time, remove them from the NaOH, and spray off the peel. The concentration of NaOH is normally in the range of 3 to 6 M. The NaOH is analyzed periodically. In one such analysis, 45.7 ...

Chemistry

100 g of water is added into 10.6 m NaOH solution. The diluted NaOH solution is then neutralized completely with H2SO4 solution. Density of NaOH is 1.08 g/ml. Calculate: i. the mol fraction of NaOH in the diluted NaOH solution. ii. mol of H2SO4 required.

Chemistry

A solution of 0.211 M NaOH is used to titrate 24.0 mL of a H2SO4 solution. If 19.0 mL of the NaOH solution is required to reach the endpoint, what is the molarity of the H2SO4 solution? H2SO4(aq)+2NaOH(aq)→2H2O(l)+NaSO4(aq)

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. 21
  22. 22
  23. 23
  24. 24
  25. 25
  26. 26
  27. 27
  28. 28
  29. 29
  30. 30
  31. 31
  32. 32
  33. 33
  34. 34
  35. 35
  36. 36
  37. 37
  38. 38
  39. 39
  40. 40
  41. 41
  42. 42
  43. 43
  44. 44
  45. 45
  46. 46
  47. 47
  48. 48
  49. 49
  50. 50
  51. 51
  52. 52
  53. 53
  54. 54
  55. 55
  56. 56
  57. 57
  58. 58
  59. 59
  60. 60
  61. 61
  62. 62
  63. 63
  64. 64
  65. 65
  66. 66
  67. 67
  68. 68
  69. 69
  70. 70
  71. 71
  72. 72
  73. 73
  74. 74
  75. 75
  76. 76
  77. 77
  78. 78
  79. 79
  80. 80
  81. 81
  82. 82
  83. 83
  84. 84
  85. 85
  86. 86
  87. 87
  88. 88
  89. 89
  90. 90
  91. 91
  92. 92
  93. 93
  94. 94
  95. 95
  96. 96
  97. 97
  98. 98
  99. 99
  100. 100