# geometry & measurement

10,872 results

### geometry

Find the longest side of triangle ABC, if measurement A=70, measurement B=2x-10, and measurement C=3x+20.

### geometry

if the measurement of angle fgk is 3y-4 and measurement of angle kgh is 2y+7 find x

### Geometry

What is the radius if: degree of measurement of arc=30 length=1/3xy(pi) My answer was 8xy. degree of measurement of arc=40 length=8/9(t)(pi) My answer was 9t. degree of measurement of arc=18 length=6(y)pi My answer was 45y. These are the questions I missed, along with my ...

### geometry

line AB is parallel to line CD, the measurement of angle A=2x-25, and the measurement of angle C=x+5. find the value of x. show work and explain your reasoning.

### Geometry

Write the ratio of the first measurement to the second measurement. Diameter of care tire:40cm Diameter of care tire:18mm I'm not sure hoow to do this. May someone explain how to do this problem.

### geometry

If angle 1 and angle 2 are vertical angles and measurement angle 1= 3x+17 and measurement angle 2= 4x-34 what is measurement angle 1?

### geometry

if the measurement of angle 1 plus the measurement of angle 4 equals 70, find the sum of angle 6 and angle 7

### Geometry

The diameter of circle C is 18 cm. measurement of arc AD is 60°. Use this information, the diagram, and your experiences in geometry this semester to answer these questions. (Use 3.14 as pie)

### PHYSICS

what's the differencces between the meaning of measurement and value of measurement in physics??? The meaning of measurement is a definition of whatever is being measured. I suggest you use a dictionary for that. The answer will depend upon what you are measuring (mass, ...

### geometry

If the measurement bewtween A and B is 44 feet and the measurement between A and C is 26 feet, what is the distance between B and C?

### Quantum Physics

Consider the observable M that corresponds to a measurement in the sign basis where the measurement value is 3 if the outcome is + and -2 if the outcome is - A)Write M in the standard basis. B)If M is the Hamiltonian acting on a qubit which is in the state |phy(0)> = |0>...

### Geometry

What is the circumference of the circle if the radius is: 5x-My answer was 57(x)pi. What is the radius if the circumference is: 30x(pi)-My answer was 2x. (x + y)pi -My answer (x+y)/7. What is the length of the arc if: radius=3 degree of measurement of arc=6- My answer was pi/9...

### geometry

what is the area of a piece of fabric that has the measurement of (s - 4)

### physics

Consider the observable M that corresponds to a measurement in the sign basis where the measurement value is 3 if the outcome is + and −2 if the outcome is −. Write M in the standard basis. If M is the Hamiltonian acting on a qubit which is in the state |ψ(0...

### physics

Consider the observable M that corresponds to a measurement in the sign basis where the measurement value is 3 if the outcome is + and −2 if the outcome is −. Write M in the standard basis. If M is the Hamiltonian acting on a qubit which is in the state |ψ(0...

### geometry

the measurement of two angles is 48 an 23 find the third

### Algebra 8th

Find the greatest possible error for each measurement. 953 mi 0.5 mi Find the greatest possible error for each measurement. 1 3/4 c not-- 1/4 c Find the greatest possible error for each measurement. 12.3 L 0.05L Find the greatest possible error for each measurement. 4 1/2 oz 1...

### Geometry

Find the measurement of angle rsp if rst=5\2y and pst =(y+5)

### geometry

Find the total area for the cylinder with the given measurement. r = 2, h = 4

### Honors Geometry

If <MQJ = 50 degrees 41' 24", find the measurement of <JQG

### geometry

a square has a diagonal measurement of 8 radical 2 inches. calculate its perimeter.

### Geometry

Find the precision for each measurement. 120 meters, 7 1/4 inches, 30.0 millimeters

### algebra

Why is 4(x+2)+4x=8 not a correct equation to solve a geometry problem if x represents a length of measurement?

### geometry - need help with this.

If angle <a and <b are complementary but <a is four times as large as <b, find the measurement of a.

### geometry

Find the area of a regular hexagon with the given measurement. 4-inch side A = sq. in.

### Geometry

A regular pentagonal solid prism has 9cm base edges. A larger, similar solid prism of the same material has 36cm base edges. How does each indicated measurement for the larger prism compare to the same measurement for the smaller prism? Find the volume and weight.

### Geometry

m<AOB=4x-2,m<BOC=5x+10,m<COD=2x+14 How do you solve the equation? And how do you find the measurement of each of the 3 given angles??

### Geometry

m<AOB=4x-2,m<BOC=5x+10,m<COD=2x+14 How do you solve the equation? And how do you find the measurement of each of the 3 given angles??

The measurement of angle BC is 30° less than the measurement of angle AB. What is the measurement of angle AB? AB-30°=180 AB=150° ?????

### Geometry and Measurement

I am trying to solve the length of the hypotenuse of a right triangle with sides of 6mm and 8mm

### math

The measurements in the list below have a characteristic in common. 6x5 2 miles 6x5 72,000 inches 6x5 3,000 feet Which statement describes the common characteristic? A Each measurement is greater than 4,000 yards. B Each measurement is equivalent 1,760 yards. C Each ...

### math

the measurement of an angle is 5times the measurement of its supplement.what is the measurement of the angle?

### Geometry

How do I figure out the area and perimeter of a square if all I know is the cross (top left corner to bottom right corner) measurement? I have a square with the cross measurement of 8.5 (or 4 X sq root of 2, i rounded to 8.5). The square looks like it is cut in half to look ...

### Statistics

Suppose that either of two instruments might be used for making a certain measurement. Instrument 1 yields a measurement whose p.d.f. is f1(x)=2x, 0 <x<1 Instrument 2 yields a measurement whose p.d.f. is f2(x)=3x^2, 0 <x<1 Suppose that one of the two instruments is...

### Math

1. Hannah drew a pattern using only equilateral triangles. Which of the following statements about the angles is an equilateral triangle is true? A. The measurement of each angle is 60 degrees** B. The measurement of each angle is 120 degrees C. The measurement of one angle is...

### Geometry

I am trying to find out the measurement of a scalene triangle. Side a is unknown b is 107.38 and c which is the hypotenuse is 100.65. Please help

### Stats and Data

Suppose that either of two instruments might be used for making a certain measurement. Instrument 1 yields a measurement whose p.d.f. is f1(x)=2x, 0 <x<1 Instrument 2 yields a measurement whose p.d.f. is f2(x)=3x^2, 0 <x<1 Suppose that one of the two instruments is...

### Quantum Physics

Suppose that a qubit is in the state |ψ> = a |0> + √ (1-a^2)|1> where a [-1,1] . If we first perform a standard basis measurement on this qubit and then perform a |u>, |u⊥> -basis measurement where |u> = b |0> + √ (1-b^2)|1> for ...

### Maths

Suppose that either of two instruments might be used for making a certain measurement. Instrument 1 yields a measurement whose p.d.f. is f1(x)=2x, 0 <x<1 Instrument 2 yields a measurement whose p.d.f. is f2(x)=3x^2, 0 <x<1 Suppose that one of the two instruments is...

### Math

Suppose that either of two instruments might be used for making a certain measurement. Instrument 1 yields a measurement whose p.d.f. is f1(x)=2x, 0 <x<1 Instrument 2 yields a measurement whose p.d.f. is f2(x)=3x^2, 0 <x<1 Suppose that one of the two instruments is...

### Chemistry

What value of a measurement must be known if the accuracy of an experimental measurement is to be determined?

### Chemistry 22

Your length measurement was 21.34 cm. The ‘accepted value’ was 21.77 cm. What is the percent error of your measurement?

### Chemistry

How many number of significant figures are there in measurement 6.80? I think 2 In measurement 43.52 cm what is digit is the most uncertain? thanks

### Physics

The percentage errors in the measurement of mass and speed are 2% and 4%respectively. Then find maximum error in the measurement of K.E?

### math

Write an explanation of the steps you use to convert a measurement in one unit to a measurement in another. 1) How many picometers are there in a kilometre?

### geometry & measurement

jose wants to buy a new tv that will fit the opening of his entertainment center. the height of the opening in his entertainment center is 27 inches. usually, the opening of an entertainment center has a width-to-height ratio of 4:3. what is the diagonal measurement of the ...

### geometry

Angle ABC and angle EBF are a pair verical angles. The measurement of angle ABC = 3X + 8 and the measurement of angle EBF = 2X + 48. What are the measurements of angle ABC and angle EBF

### Geometry

Given: Triangle ABC ~ Triangle DEF, m<A = 50o, m<D = 2x + 5y, m<F = 5x + y, and m<B = 102 - x. What is the measurement of <F?

### geometry

how do I find the measurement of the hypotenuse side of a triangle when the other side measurements are 5 and 12

### Algebra 1

A measurement is given. Find the minimum and maximum possible measurement. A doctor measures a patient's weight as 162 lb to the nearest pound.

### Biology Vocab

This is an error in measurement that can be caused by an imperfection in the equipment being used or from mistakes the experimenter makes while taking the measurement.

### geometry

A rhombus has a diagonal with a length of 17 ft. and a side measurement of 9.5 ft. What is the area of the rhombus?

### geometry

Given the triangle ABC and m<A = 22º; a = 6. Find the measurement of side b if angle C is the right angle.

### statistics

From the MM207 Student Data Set identify the following: a) A variable measured at the nominal level of measurement. b) A variable measured at the ratio level of measurement. c) A variable measured at the ordinal level of measurement

### geometry

The radius of a circle is 6cm and the arc measurement is 120 degrees, what is the length of the chord connecting the radii of the arc?

### Chemistry (Check)

Completion. struggling with this....I got 1) 2)Precision 3)experimental value 4) 5) The ___1___ of a measurement describes how close the measurement comes to the true value. The ____2___ of a measurement depends on its reproducibilty. An ___3___ is a value measured in the lab...

### groundwater science

Consider water in a well, and a point of measurement at depth below the surface of the water. True or False: if the point of measurement is located at an elevation of 2,000 ft. above mean sea level, and that point of measurement is 40 ft. below the water surface in the well, ...

### geometry 3

Given: Circle O with radius of length 4 units. measurement of arc PQ=141 degrees. Find the cordinates of point P. Circle O(0,0)

### Percent

Julian's measurement was 105 percent of 50 pounds and Amanda's measurement was 95 percent of 50 pounds. How many pounds off was Julian's measurement? How many pounds off was Amanda's measurement? Did they both have the same percent error?

### algebra

The measurement of two angles of a triangle are 39 degrees and 70 degrees. Find the measurement of the third angle. Show your work

### algebra

The measurement of two angles of a triangle are 44 degrees and 56 degrees. Find the measurement of the third angle. Show your work

### algebra

The measurement of two angles of a triangle are 69 degrees and 34 degrees. Find the measurement of the third angle. Show your work

### math

(ASAP!!) can somebody tell me the answers to the measurement test on Connexus academy lesson 17 unit 2 measurement test, so I get a good grade.

### help

if u r making a bookcover about history of measurement can u say me what can be the title that i keep ...except "history of measurement"

### Math-measurement

What is the official name of our system of measurement in America? All I ever hear about is the metric system, but I don't know what ours is called. Thanks

### chem

Is the following true or false? The actual size of a measurement multiplied by a conversion factor remains the same, because the measurement being converted is multiplied by 1.

### geometry

Assume that the given angles have been measured, and calculate the angles (marked as x) that could not be found by direct measurement. a = 38 x = 1Your answer was incorrect, but has changed from what was graded.

### PHYSICS helppppp

what is the value of measurement?????? What is the value of measurement? I hope I am understanding your question. If one wants to know the number of teeth in a horses' mouth, counting is quite valuable.

### Algebra 8th

Find the greatest possible error for the given measurement if it is to the nearest 10 miles. 150 mi a. 5 mi b. 75 mi c. 0.5 mi d. 7.5 mi Find the greatest possible error for each measurement. 18.9 m a. 0.01 m b. 0.5 m c. 9.45 m d. 0.05 m Find the greatest possible error for ...

### Physics

Suppose that a qubit is in the state |\phi\rangle=a|0\rangle+\sqrt{1-a^2}|1\rangle where a\in[-1,1]. If we first perform a standard basis measurement on this qubit and then perform a |u\rangle,|u^\perp\rangle-basis measurement where |u\rangle=b|0\rangle+\sqrt{1-b^2}|1\rangle ...

### geometry

If you have a circle in a square and r is the radius of the cicle and x is the measurement outside the square what would the formula be to find the area of the whole square using x and r?

### geometry and measurement

A pool designed for lap swimming is rectangular in shape with a uniform depth of 4.5 feet. If the pool is enlarged so that it holds twice as much water, which of the following statements could be true?

### Physical Science

If one measurement is known much more precisely than the other, the fractional error is the ratio of the absolute value of the difference (|M1-M2|), and the more accurate value. What is the percentage error of student A's measurement (37.2 cm long if it is determined by ...

### Geometry

Use parallelogram ABCD to answer the following. Diagonals BD and AC bisect at O. 1.measurement of angle BAD = 3y - 5 find angle BCD 2. AC = 12.8 cm find OC

the length of a string is known to be exactly 9.84cm. two students measured the string. student A used a ruler marked in centimeters and got a measurement of 10 cm. student B used a ruler marked in millimeters and centimeters and got a measurement of 9.8 cm. which student's ...

### geometry

find measurement angle bac db and dc are paralell, da intersects bc, angle a is 65 degrees so i multipied by two and came up with the answer 130 degrees, is this correct? thanks

### Math

Angles K and O are supplementary. If measurement angle K= 3x+10 and measurement angle O= 10x-12, find the measure of each angle. I don't understand how to solve.

### Measurement Queston

Whats the difference from 3" and 3' in a measurement? For example what is the difference from 3" x 12" and 3' x 12' Thank you for the qualification

### geometry

Alice is making the profile of a face. She is also making an exact replica of a circle with a radius of eight inches. Which statement is correct about the profile and the replica?Answer A: The profile is made by sketching and the circle is made by drawing. B: The profile is ...

### Econometrics

Consider a linear model with unobserved beterogeneity (q) and measurement error in an explanatory variable: y = B0 + B1x1 + ... + Bkx*k + q + v where ek = xk - x*k is the measurement error and we set the coefficient on q equal to one without loss of generality. The variable q ...

### Math

The edge of a cube was found to have a length of 50 cm with a possible error in measurement of 0.1 cm. Based on the measurement, you determine that the volume is 125,000 cm3. Use tangent line approximation to estimate the percentage error in volume.

### Mathematics

Dear Jiskha, I will appreciate if you can show me step by step how this geometry math question is solved. Using the Pythagorean Theorem,how do i find the length the unknown side 'b'. Side 'a' has a measurement of 1...the hypotenuse: a square root of 2. Your help is appreciated.

### Geometry

In triangle ABC,if m∠A is thirteen less than m∠C and m∠B is eleven less than four times m∠C, find the measurement of each angle. A+B+C= 180 A= 13-C B= 4C-11

### Math

If the standard error of measurement is 3, and a person scores 125, Standard error of measurement with one standard deviation would put the score at ____?

### Math

Find the greatest possible error for the measurement 0.991 g. Find the percent error of the measurement 4 cm.

### Mathematics

If a measurement of 2.25 inches on a map represents 50 miles, what distance does a measurement of 18 inches on the map represent?

### Statistics

Can someone please help with this? A measurement follows the normal distribution with a standard deviation of 15 and an unknown expectation μ. You can consider that measurement to be the "original" distribution. Two statisticians propose two distinct ways to estimate the ...

### chemistry

Every measurement has a measurement uncertainty. Discuss how precise and accurate measurement can be achieved in spite of the inherent measurement uncertainty. You could use either of the two options given below. • Take a ruler and measure the height of the textbook three ...

### geometry

Sam went to the park and saw a work crew putting in a square garden. She found a tape measure that was stretched between opposite corners with a measurement of 171.1 feet and decided to find the area. What is the area of the square in yards?

### physics

A d.c. circuit can be represented by a voltage source of 10 V in series with an output resistance of 1 k ohm. An ammeter of 50 ohm resistance is connected to the source terminals for measurement of current. what will be the accuracy of measurement?

### Math - More Precision and Significant Digits

Please help me with the following problems: 3. Choose the more precise measurement. 6 cm or 2.5 cm I think it is 2.5 cm. Is this correct? 7. Choose the less precise measurement and explain why it is less precise. 2.8 mm or 3.79 mm I think the answer is 3.79 mm. Is this correct...

### Science

What is the science of measurement 9 letter word. Thanks, Lindsey Hi there, I was able to find the answer online by typing "science of measurement" in quotes into the google search engine. I hope that helps. Thanks I had done that but without the quotetion marks. Thanks, ...

### Geometry

I have several questions, because my geometry final is tomorrow. I've completed most of the review, but can't seem to figure out these questions. It would be great if someone could tell me how to solve each equation. 1. Find the radius of the circle with the given measurement...

### Chemistry (Check)

Are most factors unity? Is this True or false I'm thinkin true.. The actual size of a measurement multiplied by a conversion factor remains the same, beacause the measurement being converted is multiplied by unity. okay

### Chemistry

suppose a graduated cylinder wasn't correctly calibrated, how would this effect the results of a measurement? How would it effect the results of a calculation using this measurement?

### Geometry

If meaurement of angle DEF=(3x+5) degrees and measurement of angle KLM=(x+31) degrees, and goth angles are complementary to angle PQR, what are the measures of the angles?

### statistics

A group of scientists is studying whether a new medical treatment has an adverse (bad) effect on lung function. Here are data on a simple random sample of 10 patients taken from a large population of patients in the study. Both variables are measurements, in liters, of the ...

### geometry

1.in which geometry do lines no contain an infinite number of points? (a) plane coordinate geometry (b) discrete geometry (c) graph theory 2. in which geometry do points have thickness? (a) plane coordinate geometry (b) discrete geometry (c) graph theory i think the answer is...

### Chemistry

I just need some ideas of what to put for these on my homework examples for extra credit Name a molecule that has: A) Tetrahedral Geometry B) Trigonal planar geometry C) Linear Geometry D) Bent Geometry

### Chemistry

I just need some ideas of what to put for these on my homework examples for extra credit Name a molecule that has: A) Tetrahedral Geometry B) Trigonal planar geometry C) Linear Geometry D) Bent Geometry