# electrical ? resistor

1,662 results

### electrical ? resistor

Calculate R of a thin-film gold resistor:L = 1 mm, width = 0.2 mm, and thickness = 0.01 mm. I am not sure what formula to use for this?

### physics

A resistor with 780 is connected to the plates of a charged capacitor with capacitance 4.32 . Just before the connection is made, the charge on the capacitor is 7.80 1)What is the energy initially stored in the capacitor? 2)What is the electrical power dissipated in the ...

### Phys

The value of a real-world resistor ______ changes with significant time as the resistor conducts a current. never rarely sometimes usually I think either never or rarely, but I'm not sure. When you unplug the resistor, the Ammeter and Voltmeter reading goes down to 0 because ...

### PHYSICS

The value of a real-world resistor ______ changes with significant time as the resistor conducts a current. never rarely sometimes usually I think either never or rarely, but I'm not sure. When you unplug the resistor, the Ammeter and Voltmeter reading goes down to 0 because ...

### Science

A generator transforms A. Potential energy into kinetic energy B. mechanical energy into electrical energy***** C. Magnetic energy into electrical energy D. Friction into electrical energy Electrical charges that are different A. Attracts each other**** B. repel each other C. ...

### PreCalc

The total electrical resistance R of two resistors connected in parallel with resistances R1 and R2 is given by 1/R=1/R1+1/R2. One resistor has a resistance of 2.3 ohms. Let x be the resistance of the second resistor. Express the total resistance R as a function of x. How do I...

### Pre-Calc

Hello, I am not sure how to go about solving this equation: The total electrical resistance R of two resistors connected in parallel with resistances R1 and R2 is given by 1/R=1/R1+1/R2. One resistor has a resistance of 2.3 ohms. Let x be the resistance of the second resistor...

### physics

An oven is plugged into a 120 V electrical outlet and "cooks" the food by using a 144 ohm resistor light bulb that converts electrical energy to both light and heat energy. If the light bulb converts 75% of the electrical energy to thermal energy, and the oven is used for a ...

### physics

A 15.0 resistor and a 20.0 resistor are connected in parallel. A 5.00 resistor is connected across a 1.00 10^2-V battery. What is the current flowing through the 20.0 resistor? A. 1.21 A B. 3.15 A C. 5.00 A D. 6.84 A I don't think it's C....

### Physics

A commercial resistor can safely dissipate power only up to a certain rated value. Beyond this value, the resistor becomes excessively hot and often cracks apart. The resistor used in this experiment was rated by the manufacturer to be a 2 watt resistor. What is the largest ...

### Physics

a)In the series circuits, what do you notice about the voltage across each resistor compared with the voltage of the battery? (There could be more than one answer) 1.The resistor voltages multiplied together give the battery's voltage 2.The resistor voltages subtract to get ...

### Physics

A filament bulb and a resistor are connected in series to a battery. Which of the following will contribute to the load of the circuit? A. Bulb B. resistor C. Bulb and resistor D. none I'm thinking the resistor, but I'm unsure. Thanks

### Physics

A filament bulb and a resistor are connected in series to a battery. Which of the following will contribute to the load of the circuit? A. Bulb B. resistor C. Bulb and resistor D. none I'm thinking the resistor, but I'm unsure. Thanks

### Physics (Tricky)

If the length of a conductor is doubled, the resistance will be ___ the original resistance. A. less than - i think its A? B. equal to C. half D. twice A resistor most suited to dissipating high power levels would be: A. Thick film resistor - i think it's A? B. Wire wound ...

### math

90 volts are applied to a circuit with 3 resistors resistor 1=20 ohms resistor 2=40 ohms and resistor 3=60 ohms how much power will be dissipated by resistor 1

### College Physics

A simple circuit is made of a power source, a rheostat and an ohmic resistor. The potential difference across the resistor is initially 5.0 ± 0.1 V. A good lab student measures the current across the resistor to be 1.65 ± 5 mA. a)If the student increases the voltage across ...

### Physics

Could someone please help me with these questions. . . 1. Why are there positive and negative electrical charges, while magnetic poles always seem to be bound together? 2.If two resistors are connected in parallel, how do you know that their effective resistance will always be...

### physics

The Easy Bake Oven is a common toy for young children who want to emulate the process of cooking. Suppose this oven is plugged into a 120 V electrical outlet and "cooks" the food by using a 144 ohm resistor light bulb that converts electrical energy to both light and heat ...

### electrical technology

A battery of 9 V charges a capacitor of 47 ìF through a resistor. What resistor value needs to be used to obtain a voltage across the capacitor of 8 V when 10 seconds have elapsed ? You will need to obtain the standard equation for the voltage across the capacitor charging in...

### physics

A 6.0 Ù resistor and a 3.0 Ù resistor are connected in parallel to a 1.5 V battery of negligible internal resistance. What is the current in the 3.0 Ù resistor?

### physics

A resistor is connected across the terminals of a 6.00-V battery, which delivers 3.50 105 J of energy to the resistor in 11 hours. What is the resistance of the resistor?

### science

laboratory connects a 16§Ù resistor, 23§Ù resistor, and a 34§Ù resistor in series and then comes the arrangement to a 36V dc source. How much current is in the circuit?

### Physics

A 15.0 kΩ resistor is hooked up to a 45.0 V battery in a circuit with a switch. a.) What is the current flowing through the resistor? b.) What is the power dissipated by the resistor?

### Physics

1)If a resistor is added to a parallel circuit, the equivalent resistance: A)increases B)decreases C)remains the same D)becomes zero I got B 2)A 10.0 resistor, 20.0 resistor, and 25.0 resistor are connected in series across a 110-V supply. Calculate the current in the circuit...

### physics

please i need help solving this problem, what is the resistance of a resistor if the potential difference across the resistor is 4.0 V when a current of 10.0 A flows through the resistor?

### physics

A 9.0 §Ù resistor and a 53.0 §Ù resistor are connected in parallel to a battery, and the current in the 9.0 §Ù resistor is found to be 1.41 A. Find the potential diﬀerence across the bat- tery.

### Electrical Engineering

what is one time constant of a 47 micro farad capacitor in series with a 120 kilo ohm resistor?

### Physics.

A 15.0- resistor and a 20.0- resistor are connected in parallel. A 5.00- resistor is connected in series with this parallel arrangement. The resistors are connected across a 1.00 10^2-V battery. What is the current flowing through the 20.0- resistor? IS it 3.15 A?

### physics

A 65.0-Ù resistor is connected in parallel with a 117.0-Ù resistor. This parallel group is connected in series with a 22.0-Ù resistor. The total combination is connected across a 15.0-V battery Find the current in the 117.0-Ù resistor. Find the power dissipated in the 117....

### Physics

A 40.0 ohm resistor, 20.0 ohm resistor, and a 10.0 ohm resistor are connected in series across a 220-V supply. Which resistor is the warmest? a. 40.0 ohm b. 20.0 ohm c. 10.0 ohm d. they are all the same

### Physics

A simple circuit is made of a power source, a rheostat and an ohmic resistor. The potential difference across the resistor is initially 5.0 +/- 0.1 V. A good lab student measures the current across the resistor to be 1.65 +/- 5 mA. a)If the student increases the voltage across...

### science

A thermally insulated 50 ohm resistor carries a current of 1 A for 1 s. The initial temperature of the resistor is 10 degree Celsius, its mass is 5 g, its specific heat capacity is 850. What is the change in entropy of the resistor?

### Math!!

Christmas lights that stay on when one bulb burns out are wired as parallel circuits. Resistors can be used with parallel electrical circuits to restrict the current flow and produce heat. If the first resistor (R1) = 20 Ohms, the second resistor (R2) = 30 Ohms and the ...

### mathematica

Christmas lights that stay on when one bulb burns out are wired as parallel circuits. Resistors can be used with parallel electrical circuits to restrict the current flow and produce heat. If the first resistor (R1) = 20 Ohms, the second resistor (R2) = 30 Ohms and the ...

1. Which of the following shows the correct sequence of energy transformations when listening to the radio? electrical; kinetic; sound; kinetic; electrical electrical; sound; kinetic; sound; electrical sound; electrical; kinetic; electrical; sound kinetic; sound; electrical; ...

### physic

a resistor has a voltage of 6.65 V and a current of 4.45 A. it is placed in a calorimeter containing 200g of water at 24 degree Celsius. the calorimeter is aluminum (specific heat= 0.220 cal/g-Celsius), and its mass is 60g. the heat capacity of the resistor itself is ...

### Physics

A 10.0 Ω resistor is hooked up in series with an 8.0 Ω resistor followed by a 27.0 Ω resistor. The circuit is powered by a 9.0 V battery -Calculate the equivalent resistance. -Calculate the voltage drop across each resistor in the circuit.

### Physics

The constant resistance of a resistor is 30 ohms, independent of the temperature. The resistor is made up of an aluminium resistor with resistance R1 at 0°C in series with a carbon resistor with resistance R2 at 0°C. Evaluate R1 and R2, temperature coefficient for aluminum ...

### physics

The potential differnece across a resistor is 4.4 * 10^2 V. If the resistance of the resistor is 1.8 k ohms, how much current flows throught the resistor? R=1.8 k ohms I=? 4.4*10^2 V V=IR I=V/R = 4.4 * 10^2 ___________ = 2.44*10 1.8 * 10^ 24.4 A is this done correctly?

### Physics repost

A 2.00 resistor, and a 12.0 resistor are connected in parallel across a 20.0-V battery. What is the current flowing through the 2.00 resistor? A)1.67 A B)1.40 A C)11.6 A D)10.0 A This is all I understand. Can you explain step by step and show how to get the answer? To find ...

### Algebra

Show all steps The maximum number of volts, E, that can be placed across a resistor is given by the formula E=sq root(PR), where P is the number of watts of piwer that the resistor can absorb and R is the resistance of the resistor in ohms. Solve this equation for R. Use the ...

### electrical circuit instrumentation

two resistor 6 ohm and 8 ohm are connected in parallael across 36v power supply

### chemistry

something connects a 16 resistor, 23 resistor, and 34 resistor in series and then connects the arrangement to a 36 v dc source. how much current is in the circuit?

### physics

a 1 ohm resistor, a 1000 resistor and a 2000 ohm resistor are connected in parallel. The total resistance is

### Physics

Could some one tell m if this is right? 1)Does currend flow through a resistor or across a resistor in a series circuit? THROUGH 2) Is a voltage establishes through a resistor or across ? ACROSS PARALLEL CIRCUITS 1)there is a voltage drop of 6volts across each 2-Ù resistor ...

### Physics

a 9v battery is in series with a 10 ohm resistor, a 20 ohm resistor, and a 30 ohm resistor. What is the power absorbed by the 10 ohm resistor?

### physics

A 59.0-Ω resistor is connected in parallel with a 116.0-Ω resistor. This parallel group is connected in series with a 15.0-Ω resistor. The total combination is connected across a 15.0-V battery. (a) Find the current in the 116.0-Ω resistor. _______ A (b) ...

### physics

A 59.0-Ω resistor is connected in parallel with a 116.0-Ω resistor. This parallel group is connected in series with a 15.0-Ω resistor. The total combination is connected across a 15.0-V battery. (a) Find the current in the 116.0-Ω resistor. ______A (b) Find...

### Physics

A 5 ohm resistor a 15 ohm resistor and a unknown resistor, r, are connected as shown with a 15 volt source. The ammeter reads a current of 0.5 ampere. I got .1V by using ohm's law but I'm not sure if it's right

### Physics, am i right?

A 10.0 Ω resistor is in parallel with a 20.0 Ω resistor and supplied by a 9.0 V battery. What is the current passing through the 20.0 Ω resistor? (Points : 1) 0.45 A 0.90 A 1.35 A <--- 6.00 A

### physics

A 5.0 Ω resistor, a 9.0 Ω resistor, and a 12.0 Ω resistor are connected in parallel across a 24.0 V battery. a) What is the equivalent resistance of the circuit? Answer in units of Ω b) What is the current in the 5.0 Ω resistor? Answer in units of A

### physics

Your electronic friend needs a 20 ohms resistor but has only 40 ohms resistor. He tells you that he can combine them to produce a 20 ohms resistor? How?

### Physics

The nominal resistance R of the resistor used in this experiment was printed on the resistor by the manufacturer. According to the manufacturer, the actual resistance of the resistor should not differ from its nominal value by more than 1%. Does your most accurate measured ...

### Physics

A 5.0 Ω resistor, a 9.0 Ω resistor, and a 10.0 Ω resistor are connected in parallel across a 24.0 V battery. What is the equivalent resistance of the circuit? Answer in units of Ω

### Science

A thermally insulated 50ohm resistor carries a current of 1A for 1s. The initial temperature of the resistor is 10degree, its mass is 5g, and its specific heat capacity is 850j/kg/k. Calculate the change in entropy of the resistor and what is the change in entropy of the ...

### Science

A thermally insulated 50ohm resistor carries a current of 1A for 1s. The initial temperature of the resistor is 10degree, its mass is 5g, and its specific heat capacity is 850j/kg/k. Calculate the change in entropy of the resistor and what is the change in entropy of the ...

### Science

A thermally insulated 50ohm resistor carries a current of 1A for 1s. The initial temperature of the resistor is 10degree, its mass is 5g, and its specific heat capacity is 850j/kg/k. Calculate the change in entropy of the resistor and what is the change in entropy of the ...

### Physics 2

A(n) 78-Ù resistor and a 68-Ù resistor are connected in series across a battery. The voltage across the 78-Ù resistor is 25 V. What is the voltage across the 68-Ù resistor?

### Physics

A 61.5-Ω resistor is connected in parallel with a 146.6-Ω resistor. This parallel group is connected in series with a 16.0-Ω resistor. The total combination is connected across a 13.6-V battery. Find (a) the current and (b) the power dissipated in the 146.6-&#...

### Physics

A 67.6 ohms resistor is connected in parallel with a 103.8 ohms resistor. This parallel group is connected in series with a 20.8 ohms resistor. The total combination is connected across a 18.2-V battery. Find a) the current and b) the power dissipated in the 103.8 ohms resistor.

### electrical

6.A resistor R1 dissipates power P when connected to a certain generator with voltage V. If a resistance R2 is put in series with R1 the power dissipation by R1 A) Decreases B) Increases C) Remains the same D) Any of the above depending upon the value of R1 and R2

### Physics

Three resistors having the same resistance value are wired in parallel. How does the equivalent resistance compare to the resistance value of a single resistor? The equivalent resistance is thrice the value of a single resistor. The equivalent resistance is the same as the ...

### Electronics, Physics

In a circuit, a 10 Ω resistor is connected in series to a parallel group containing a 60 Ω resistor and a 5 Ω resistor. What is the total resistance in this circuit? A formula and explanation would be great!

### Physical Science

A 20.0-Ù resistor and a 45.0-Ù resistor in parallel are connected to a 120-V dc source. (a) What is (are) the current(s) through the resistors? current through the 20.0-Ù resistor: Incorrect: Your answer is incorrect. . A current through the 45.0-Ù resistor: Incorrect: ...

### Electrical

(2) 1500 Ù resistors are connected in series. They are then connected in parallel to a single (1) 5 kÙ resistor. a) Draw the circuit before and after reduction: b) What is the equivalent resistance of the circuit?

### physics

The current in a 51 resistor is 0.14 A. This resistor is in series with a 28 resistor, and the series combination is connected across a battery. What is the battery voltage?

### physics 102

The output voltage of an AC generator is given by Δv = (180 V) sin (70πt). The generator is connected across a 13.0-Ω resistor. (a) By inspection, what is the maximum voltage? V (b) By inspection, what is the frequency? Hz (c) Find the rms voltage across the ...

### physics

A student in the laboratory connects a 13 Ω resistor, a 24 Ω resistor, and a 41 Ω resistor in parallel and then connects the arrangement to a 43 V dc source. What is the current? What is the power? (in watts)

### Physics

A circuit consists of a 10 ohm resistor in series with 3 identical batteries each with an emf = 1.0V and internal resistance of 5 ohms. a) find potential difference between the terminals b) potential difference across the 10 ohm resistor c) power dissipated in resistor

### College Physics

You have 20 and 80 (unit is the upside down U) resistors in a circuit with a 100 V battery. A)These resistors are parallel. Find the current through each resistor and the voltage drop across each resistor. B) These resistors are connected in series. Find the current through ...

### physics

A resistor of resistance R is connected to a power supply of constant EMF E=12 V and internal resistance r=3 Ω . The energy dissipated in the resistor R is used to heat water. What resistance R in Ohms gives the maximum power dissipated in the resistor?

### Physic

A 2.5-kohms and a 3.7-kohms resistor are connected in parallel; this combination is connected in series with a 1.4 kohms resistor. If each resistor is rated at 0.5W (maximum without overheating), what is the maximum voltage that can be applied across the whole network?

### Physic

A 2.5-kohms and a 3.7-kohms resistor are connected in parallel; this combination is connected in series with a 1.4 kohms resistor. If each resistor is rated at 0.5W (maximum without overheating), what is the maximum voltage that can be applied across the whole network?

### physics

please tell me if thsi si correct Two equal charges are separated by 3.7 * 10^-10 m. the force between the charges has a magnitude of 2.37 * 10^-3 N. What is the magnitude of q on the changes? f=1/4pi Er * q^2/r^2 2.37 * 10^-3 = 9*10^9 * q^2 ______________ (3.7 * 10^-10)^2 3....

### Physics

1)A 15.0 resistor and a 20.0 resistor are connector in parallel. A 5.00 resistor is connected in series with this parallel arrangement. The resistors are connected across a 1.00(I think something else is suppose to be after that but its missing)10^2-V battery. What is the ...

### series and parellel circuits

ok here we go ... its a series-parellel circuit with 5 resistors. 12 volt battery- wire goes up then one wire branches up at 45 deg with a 10 ohm resistor then down at a 45 deg with a 10 ohm resistor, a second wire branches down at 45 deg with a 20 ohm resistor then up at a 45...

### physics

An 21.0 , 12.0 , and 5.0 resistor are connected in series with an emf source. The current in the 12.0 resistor is measured to be 4.00 A.

### Physics

12 volts is applied across a 4 ohm resistor. How much power is dissipated by the resistor?

### Physics

1. A 40Ω , 20Ω and 60Ω resistor is connected in a parallel circuit. Which resistor would have the greatest current passing through it and why? 2. A 24Ω , 8Ω and 60Ω resistor is connected in a series circuit. Which resistor would have the greatest ...

### Physics

A current of 4.6 A is measured through a 7.8 ohms resistor for 1.75 minutes. How much heat is generated by the resistor?

### Physics

A current of 4.6 A is measured through a 7.8 ohms resistor for 1.75 minutes. How much heat is generated by the resistor?

### Physics

A 10-ohm resistor is attached to a 20-ohm resistor in series. This combination is then attached to a 30-ohm resistor in parallel. This is then connected to a 120-V battery. What is the current drawn from the battery?

### physics.

resistors of 30 ohms and 60 ohms are connected in parallel and joined in series to a 10 ohm resistor. the circuit voltage is 180 volts I need to find 1)the voltage of the parallel circuit 2)the resistance of the complete circuit 3)the voltage across the 10 ohm resistor 4) the ...

### Physics

An rms voltage of 120 V produces a maximum current of 2.6 A in a certain resistor.Find the resistance of this resistor?

### physics

calculate the value of the resistor that will give a total resistance of 4 ohms if it is connected in parallel with a 12 ohm resistor.

### College physics

Find the following currents. The current I_1 through the resistor of resistance R1 = 15.0 Ohm * The current I2 through the resistor of resistance R2 = 45.0 ohm. * The current I3 through the resistor of resistance R3 = 20.0 Ohm. * The current I4 through the resistor of ...

### Physics

A 30 ohm resistor is connected to a 1.5 V battery. How much power is dissipated by the resistor? I'm confused of the formula to use here.

### Physics

I have a resistor of 230 [Ohm] and apply a voltage across it of 9 [Volt]. What is the current through the resistor in milliAmp? [mA]

### Physics

A 50 ohm resistor consists of a copper portion joined to carbon portion, the resistance of the resistor being the sum of the resistance for 2 portions. Find the resistance of the copper portion of the resistor so that the combined resistance will be constant at all temperature.

### Physics Circuit Problem

(dot) webassign (dot) net / s e r c p 9 / 1 8 - p - 0 2 1 - a l t . g i f Determine... (a) the current in each resistor (Indicate the direction of the current flow through each resistor through the sign of your answer. Take upward current flow as positive.) (b) the potential ...

### Physics-College

You have a 50V battery in a circuit with a single resistor R. If the resistor dissipates 200 J of energy in 5 seconds, what is its resistance?

### Science

3 resistors having the same resistance value are wired in parallel, how does the equivalent resistance compare to the resistance value of a single resistor? 1) The equivalent resistance is thrice the value of a single resistor. 2) The equivalent resistance is the same as the ...

### physics

A 15-V battery is hooked up to three resistors in series. The voltage drop across the first resistor is 3V and the voltage drop across the sencond resistor is 10V. What is the voltage drop across the last resistor? I don't understand what equation to do for this problem. Thanks.

### Physics

The value of a real-world resistor ______ changes with significant time as the resistor conducts a current. never rarely sometimes usually

### Physics

Three resistors of value 1.0 , 2.0 and 4.0 are connected in a parallel circuit with a 6.0 V battery. a) What is the total equivalent resistance? b) What is the across each resistor? c) The power delivered to the 4.0 resistor?

### Physics

Explain what happens to the charge carriers in a semiconductor light dependant resistor when it is illuminated. Suggest why shining light onto an LED might be expected to generate a small voltage between its terminals. Thx A semiconducting light-dependent resistor excites more...

### Physics

Use Kirchhoff's junction theorem to explain why the total equivalent resistance of a circuit is reduced, not increased, by connecting a second resistor in parallel to another resistor.

### Physics

A resistor R is connected to a 12 V battery. The total current increases five times when a 400 Ohm resistor is added in parallel with it. The value of resistance R is? Please help me.

### physics

A resistor is to have a constant resistance of 30(ohm), independent of temperature. For this, an aluminum resistor with resistance R1 at 0(Celsius) is used in series with a carbon resistor with resistance R2 at 0(Celsius). Evaluate R1 and R2, given that a1=3.9 x 10^-3 degree ...

### Physics

A wire-wound resistor with a resistance of250ohm Will overheat if the power dissipated exceeds 10W.What is the maximum constant voltage V that can be applied across the terminals of this resistor?