Post a New Question

diluted pH

887 results

chemistry
Transfer the tablet to a clean 125-mL Erlenmeyer flask. Add 10-mL of 1M NaOH and heat the mixture to a gentle boil. Once the solution has cooled to room temperature, transfer it to a 100-mL vol. flask. Using the diluted solution from the 100-mL volumetric flask, rinse a 1-mL ...

Analytical Chemistry
Any help/advice on answering this question would be a big help! :) The analysis of lead (Pb) in a sample of solder was carried out using atomic absorption spectroscopy as follows. 1.013 g of solder was completely dissolved in a small volume of nitric acid and the solution made...

Chemistry
A chemist dissolves 0.096 g of CuSO4 · 5 H2O in water and dilutes the solution to the mark in a 500-mL volumetric flask. A 10.8-mL sample of this solution is then transferred to a second 500-mL volumetric flask and diluted. What is the molarity of CuSO4 in the second solution...

Chemistry
A chemist dissolves 0.096 g of CuSO4 · 5 H2O in water and dilutes the solution to the mark in a 500-mL volumetric flask. A 10.8-mL sample of this solution is then transferred to a second 500-mL volumetric flask and diluted. What is the molarity of CuSO4 in the second solution...

Chem
Complete the table below: Note: Make simplifying assumptions, do not use the quadratic formula. What is the pH of the solution created by combining 1.90 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? mL NaOH: 1.90 pH w/HCl...

Chemistry
A solid weak acid is weighed, dissolved in water and diluted to exactly 50.00 ml. 25.00 ml of the solution is taken out and is titrated to a neutral endpoint with 0.10 M NaOH. The titrated portion is then mixed with the remaining untitrated portion and the pH of the mixture is...

Chemistry
I have a few question about an equilibrium lab we performed. Approximately .1 g of CoCl2 * 6H2O was mixed with 2 mL of 12 M HCl. The solution turned blue. Then, water was added and stirred into the solution in 2 mL incriments until no further color change occured- the final ...

Chemistry -thanks
Hi,there was an error with the procedure. 1.0g NaOH sample was dissolved in 5ml of water and acidified with 4ml of conc. nitric acid,not dilute nitric acid. This was then made up to 15ml with water.After acidifying with conc. nitric acid instead of dilute nitric acid, no such ...

chemistry
530 mL solution 10% HCl has been spilt onto the bench. It cannot be diluted or washed away. How much of the granular NaOH from the container seen in a must be used to neutralise the acid? [Using NaOH: MM = 40 g/mol] 1. I have NaOH + HCl --> NaCl + H2O. 10% HCI in a 530ml ...

Chemistry - pls help
This is a limit test for chlorides. 1.0g of NaOH sample was dissolved in 5ml of deionized water, acidified with 4ml of dilute nitric acid and diluted to 15ml with deionized water. (Test tube A) 10ml of 50ppm Standard NaCl solution was prepared. 5ml of water was added, follwed ...

chem
Complete the table below: Note: Make simplifying assumptions, do not use the quadratic formula. What is the pH of the solution created by combining 1.00 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? table 1: mL NaOH=1.00 ...

chemistry
Would the following procedural errors result in an incorrectly high or low calculated percent NaOCl in commercial bleach solution? A student failed to allow the volumetric pipet to drain completely when transferring the diluted bleaching solution to the Erlenmeyer flask. I get...

chemistry
Would the following procedural errors result in an incorrectly high or low calculated percent NaOCl in commercial bleach solution? A student failed to allow the volumetric pipet to drain completely when transferring the diluted bleaching solution to the Erlenmeyer flask. I get...

Organic Chemistry
How am I supposed to do these questions? I'm completely lost. A 0.120 M solution of an enantiomerically pure chiral compound D has an observed rotation of 0.12° in a 1-dm sample container. The molar mass of the compound is 130.0 g/mol. (b) What is the observed rotation if ...

Chemistry
Hello. Can I get someone to help me set up these problems? 1.) How many moles of N are there in 2.6 moles of NHO3? 2.) How many moles of C2H6 (g) are consumed when 4.4 mol CO2 (g) are produced? 3) How many milliliters of 0.80 M CuSO4 must be diluted to make 866 milliliters of ...

General Chemistry
Calculate the theoretical pH after 2.50 mL and 9.50 mL of NaOH has been added in both the titration of HCl and of HC2H3O2. Indicate if the volume of NaOH is before or after the equivalence point. Compare these theoretical values with the actual values found on the titration ...

Biochem
1 ml of whole blood is collected and centrifuged to obtain a plasma sample. The volume of the plasma sample is 600 microlitres. A 1 in 4 dilution of the plasma is made and analysed using a cholesterol assay like the one you performed in the laboratory. 10 microlitres of both ...

Biochem
1 ml of whole blood is collected and centrifuged to obtain a plasma sample. The volume of the plasma sample is 600 microlitres. A 1 in 4 dilution of the plasma is made and analysed using a cholesterol assay like the one you performed in the laboratory. 10 microlitres of both ...

Chemistry
What is the pH of the solution created by combining 12.20 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? mL NaOH pH w/HCl pH w/HC2H3O2 12.20 =================================== my work: 0.000420 moles of NaOH / 0.020 ...

Chemistry
The Question Is: "A student weighs 0.347 g of KHP on a laboratory balance. The KHP was titrated with NaOH and the concentration of the NaOH determined to be 0.110 M. For the second titration, the student correctly diluted 6 M HCl from the reagent shelf using a graduated ...

College Chemistry
"A student weighs 0.347 g of KHP on a laboratory balance. The KHP was titrated with NaOH and the concentration of the NaOH determined to be 0.110 M. For the second titration, the student correctly diluted 6 M HCl from the reagent shelf using a graduated cylinder to obtain ...

College Chemistry
The Question Is: "A student weighs 0.347 g of KHP on a laboratory balance. The KHP was titrated with NaOH and the concentration of the NaOH determined to be 0.110 M. For the second titration, the student correctly diluted 6 M HCl from the reagent shelf using a graduated ...

Chemistry
A plasma reaction converts A (Molecular weight = 200) to B and uses NAD as a co-substrate and produces NADH as a by product (1 mole of NADH is produced per every 1 mole of A converted to B). The amount of NADH can be determined by monitoring its’ absorbance at 340nm in a ...

chemistry
1) Starting with 75.00 g of 1-propanol and 75.00 g of PCl 3. Calculate the theoretical yield of 1-chloropropane. 3CH3CH2CH2OH + PCl 3 --> 3CH3CH2CH2Cl + H3PO3 Answer in terms of grams. the answer that i got is 98.12, is this right and how many sig figs should it be? 2) What...

Chemistry-Pressure
The wastewater solution from a factory containing high levels of salts needs to be diluted before it can be released into the environment. Therefore, two containers of waste solution are separated by a semipermeable membrane and pressure is applied to one container, forcing ...

Chemistry 12
In a lab the task was to dilute a 1.0M sol'n of Acetic Acid to a sol'n with a final pH of 4.15. The method I used to solve this was apparently wrong, but I don't understand how or why. Please help! Here is what I did: AcOH + H2O <-> H3O+ + AcO- First I found the final ...

chemistry
1. if 15.0mL of 4.5 M NaOH are diluted with water to a volume of 500mL, what is the molarity of the resulting solution? 2. in a acid-base titration, 33.65mL of an 0.148 M HCL solution were required to neutralize 25.00mL of a NaOH solution. What is the molarity of the NaOH ...

Biology
Hi, I am doing my lab assignment about Protein Analysis. Our job is to find the concentration of the casein protein in our original Unknown sample with the initial volume of 2ml. So after plotting the graph of the data given, we are supposed to find the equation for the line ...

Analytical chemistry
A 5ml portion of table wine was diluted to 100 ml in a volumetric flask. The ethanol in a 20 ml aliquot was distilled into 100 ml of 0.05151M K2Cr2O7. heating completed oxidation of the alcohol to acetic acid: Ch3Ch2OH + 2Cr2O7(2-) +16H(+) -> 3Ch3COOH + 4Cr(3+) + 11H2O ...

Purity
The question asked is: Using yur results as a guide, comment on the purity of the material in the green and yellow bands. (from a TLC of spinach extraction pigments.) I'm not quite sure what they want here and my plate is in the lab, not here. There were yellow and green bands...

Chemistry
A student makes a solution by dissolving 55.8 grams of potassium hydroxide in 875.0 grams of water. The resulting solution has a density of 1.07 grams per milliliter. 1. What is the volume of this solution? 2. Calculate the % concentration of this solution. 3. Calculate the ...

Chemistry
A student makes a solution by dissolving 55.8 grams of potassium hydroxide in 875.0 grams of water. The resulting solution has a density of 1.07 grams per milliliter. 1. What is the volume of this solution? 2. Calculate the % concentration of this solution. 3. Calculate the ...

Chemistry
A student makes a solution by dissolving 55.8 grams of potassium hydroxide in 875.0 grams of water. The resulting solution has a density of 1.07 grams per milliliter. 1. What is the volume of this solution? 2. Calculate the % concentration of this solution. 3. Calculate the ...

Chemistry
A student makes a solution by dissolving 55.8 grams of potassium hydroxide in 875.0 grams of water. The resulting solution has a density of 1.07 grams per milliliter. 1. What is the volume of this solution? 2. Calculate the % concentration of this solution. 3. Calculate the ...

biochemistry
You have purifiedLDH using affinity chromatography. Using the bradford assay you determined the total protein concentration of the column fraction to be 10 mg/ml in a final volume of 2.4 ml. You diluted some of your column fraction to 1 mg/ml using SDS Page sample loading ...

chemistry
You have purifiedLDH using affinity chromatography. Using the bradford assay you determined the total protein concentration of the column fraction to be 10 mg/ml in a final volume of 2.4 ml. You diluted some of your column fraction to 1 mg/ml using SDS Page sample loading ...

Chemistry
A buffer solution is made as followed: i)adding 13.50mL of 0.200mol/L sodium hydroxide to 50.00mL of 0.100mol/L propanoic acid. ii)diluting the resulted buffer into a total volume of 100.00mL Using IRE-C tables (if possible) calculate: a)The pH of the buffer -before the ...

College Gen.Chemistry
A student wanted to determine the amount of copper in a sample of copper ore. The student dissolved a 2.500 ± 0.001 g piece of copper ore in about 75 mL of nitric acid; then, a complexing agent was added. The student transferred this solution to a volumetric flask and used de...

Chemistry - Science (Dr. Bob222)
A student wanted to determine the amount of copper in a sample of copper ore. The student dissolved a 2.500 ± 0.001 g piece of copper ore in about 75 mL of nitric acid; then, a complexing agent was added. The student transferred this solution to a volumetric flask and used de...

CHEMISTRY HELP!
(1) A beaker with 165 mL of an acetic acid buffer with a pH of 5.00 is sitting on a bench top. The total molarity of the acid and conjugate base in the buffer is 0.100M. A student adds 7.20mL of a 0.320M HCl solution to the beaker. How much will the pH change? The pka of ...

Chemistry
What is the pH of the solution created by combining 2.50 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? I believe if my calculations are correct the answer is 1.28 however i do not know how to answer this question because it has a weak acid instead of a strong ...

English II
Explain how your mystery/legend contains the following literary elements: I chose Atlantis as my mystery/legend. I am not sure what they mean when they say scene. My answer is as follows. a. Setting b. Plot c. Characters d. Conflict e. Scene The legend/mystery of Atlantis ...

Chemistry - please help
Please help to determine the (%w/w) benzoyl peroxide (C14H20O4) in a sample. Procedure: 2.500g of sample was dissolved in 75ml dimethylformamide and diluted to 100.0ml with the same solvent. (Solution T). To 5.0ml of Solution T, 20ml of acetone and 3ml of a 500g/l solution of ...

Biology help please
1.Many freshwater invertebrates eliminate ammonia by: A. Converting it to uric acid and eliminating it with solid wastes. B. simple diffusion across the gill membranes. C. converting it to urea and eliminating it in their urine. D. simple diffusion across the skin.****** 2. ...

Biology help please
1.Many freshwater invertebrates eliminate ammonia by: A. Converting it to uric acid and eliminating it with solid wastes. B. simple diffusion across the gill membranes. C. converting it to urea and eliminating it in their urine. D. simple diffusion across the skin.****** 2. ...

math
I have some of the answers to this project but I need help with the last couple of answers. Your next project will involve painting the walls and ceiling of your room. First find the surface area of each wall and the ceiling in square feet. NOTE: you need to CLEARLY identify ...

chemistry
I'm trying to figure out what went wrong during my freshman chem lab. We were figuring out the enthalpy of formation of MgO(s). MgO(s) + 2H+(aq) -> Mg2+(aq) + H2O(l) dHrxn = -334.83kJ/mol Mg(s) + 2H+(aq) -> Mg2+(aq) + H2(g) dHxrn = -1105kJ/mol H2(g)+ 1/2O2(g) -> H2O(l...

Analytical Chemistry
I am having major issues with this problem and I no clue where to start. It also doesn't help that the professor never taught us how to calculate mass % from data like this... Students in the analytical chemistry class were given a sample of spinach to determine its iron ...

Biology help please
1.Many freshwater invertebrates eliminate ammonia by: A. Converting it to uric acid and eliminating it with solid wastes. B. simple diffusion across the gill membranes. C. converting it to urea and eliminating it in their urine. D. simple diffusion across the skin.****** 2. ...

Intermediate Accounting
Information relating to the capital structure of Parke Corporation is as follows: ` December 31 2008 2009 Outstanding shares of: Common stock 90,000 90,000 Preferred stock, convertible into 30,000 shares of common 30,000 30,000 10% convertible bonds, convertible into 20,000 ...

Chemistry 12
15. The concentration of hydroxide ions in a solution of nitric acid 0.2 M is: a. 2 x 10-14 M b. 5 x 10-14 M c. 5 x 10-7 M d. 2 x 10-1 M 16. Aqueous solutions of strong acids and strong bases: a. are good electricity conductors b. make litmus paper become red c. have a pH of 7...

Organic Chemistry
A 0.160 M solution of an enantiomerically pure chiral compound D has an observed rotation of 0.20° in a 1-dm sample container. The molar mass of the compound is 128.0 g/mol. (a) What is the specific rotation of D? (b) What is the observed rotation if this solution is mixed ...

chemistry
Iron can be determined gravimetrically by precipitating as Fe(OH)3 and igniting to Fe2O3. The sample to be analyzed is weighed and transferred to a 400-mL beaker where it is dissolved in 50 mL of H2O and 10 mL of 6 M HCl. Any Fe2+ that is present is oxidized to Fe3+ with 1...

Chemistry- Drbob-help
I have placed the answer I got please help. A student makes a solution by dissolving 55.8 grams of potassium hydroxide in 875.0 grams of water. The resulting solution has a density of 1.07 grams per milliliter. 1. What is the volume of this solution? 870mL 2. Calculate the % ...

chemistry
To what volume should you dilute 131 mL of an 8.20 M CuCl2 solution so that 49.0 mL of the diluted solution contains 4.53g CuCl2 ? Chemistry...Help!! - Dr Russ, Wednesday, December 8, 2010 at 4:43am Molar mass of CuCl2 is 134.5 g mol^-1 so solution needs to contain 4.53 g / ...

chemistry
analysis of a mixture of carbonate and bicarbonate: I did an experiment where 2.306g of unknown was diluted with distilled water to 250ml. Then 3 25mL samples of this unknown were titrated with .0663 M HCl and end point volumes were: 41.12mL, 41.00mL and 40.99mL. Then 3 more ...

chemistry
STANDARD: Put into a clean 250 mL volumetric flask exactly ..... 0.90 ml of 1.00 mM iodate STANDARD. Add an excess of 1M KI and 1M Sulfuric Acid and let stand for 5 minutes. Dilute to volume. UNKNOWN: Pipet into a clean 250 mL volumetric flask 1.00 mL of your UNKNOWN and ...

Chemistry
A reaction mixture of 4.0 mL of 0.002 M SCN- and 5.0 mL of 0.002 M Fe3+ is diluted to 10.0 mL with 0.1 M HNO3 to form the blood-red FeNCS2+ complex. The equilibrium molar concentration of the FeNCS2+ determined from a standardization curve is 1.5x10^-4 mol/L. Calculate, in ...

chemistry
A reaction mixture of 4.0 mL of 0.002 M SCN- and 5.0 mL of 0.002 M Fe3+ is diluted to 10.0 mL with 0.1 M HNO3 to form the blood-red FeNCS2+ complex. The equilibrium molar concentration of the FeNCS2+ determined from a standardization curve is 1.5x10^-4 mol/L. Calculate, in ...

Chemistry
I have no idea where to even start with this problem on my pre-lab! For part of the experiment, you will need to prepare 100 mL of 0.025 M CH3CO2H, starting from commercial "glacial" acetic acid, which has a concentration of 17.4 M. This is best done by making two dilutions, ...

Finance
United Technology Corporation (UTC) has $40 million of convertible bonds outstanding (40,000 bonds at $1,000 par value) with a coupon rate of 11 percent. Interest rates are currently 8 percent for bond of equal risk. The bonds have 15 years left to maturity. The bonds may be ...

I need answer fast
A machine will add 128 parts of water to l part of the kool aid in the machine. If a kool aid must be dispensed in the ratio 1part kool aid and 448 parts of water, how should the mixture be diluted. Please give me the steps to get to answer. You need to add 448-128 = 320 parts...

Chemistry
A sample of 8.44 grams of NaOH is dissolved into 536 mL of aqueous 0.250 M NaOH (assume no volume change). This solution is then poured into 1.96 gallons of water. You may assume that the two volumes can be added.) What is the concentration of NaOH in the final solution? ...

chemistry,
in analyzing household bleach. I have a flask that contains 10.00 mL diluted bleach + 0.4g KI + 20 mL distilled water and 20 drops of 2M HCl. To that I titrated 30.60 mL Na2S2O3 and I need to calculate the number of moles of NaOCl reacted. This is what I was thinking.. ...

Chemistry- Drbob-help#3
I still need help with #3 I'm not sure how I got 1.14M. I have tried to do the problem over, but I not coming up with my original answer of 1.14M. Somehow I am missing a step. Please show work for the 1.14M Thanks Question#9 reads exactly as written. A student makes a solution...

Chemistry - more advice needed thanks
I obtained a lot of dirty brown ppt the moment the mixture was poured into AgNO3 solution. Does this mean my NaOH sample contains a lot of chlorides? Could other silver halides be present? However for my control solution of 50ppm sodium chloride solution,a cloudy white ppt was...

Chemistry
Please check my answers. 1. Using the equations, IO3- +5I- + 6H+ -> 3I2 + 3H2O C6H8O6 + I2 -> C6H6O6 + 2I- + 2H+ how many equivalents of IO3- are required to produce enough I2 to oxidize one equivalent of ascorbic acid? Answer: 1IO3- <-> 3I2 <-> 3C6H8O6 1/3 ...

chemistry
Copper can be determined gravimetrically by precipitation as copper(I)thiocyanate, CuSCN. A wrought aluminum-copper sample(4.5167 g) was dissolved in a minimum amount of concentrated HCl followd by the additon of 25 ml of sulfurous acid to reduced the copper. This solution was...

chemistry
Problem 3 A publication this year in the journal Yeast (who’d have thought!) by a Scottish group described their development of a spectrometric procedure to monitor the concentration of glucose, ethanol, biomass, and protein content in a vat during the production of Baker’...

Repost-Chemistry -please help
Hi, sorry I missed out something. The titrant used was 0.100M Sodium thoiosulphate.Do I have to consider its concentration in the calculations? Thanks a lot. Posted by angela on Tuesday, August 3, 2010 at 6:58pm. Please help to determine the (%w/w) benzoyl peroxide (C14H20O4) ...

Biology - Help!!
Can someone check these for me? 1. Excretion is the process of (1 point) exchanging carbon dioxide for oxygen. removing metabolic wastes from the body.*** pumping blood throughout the body to supply nutrients and oxygen to cells. breaking food down into nutrients that can be ...

science(chem)
What is Zimmerman Reagent made of? (I know it is acidic b/c I was told after it burned a hole in my jeans) acid? You must mean Zimmermann-Reinhardt reagent (79 g MnSO4, 100 mL of concentrated H2SO4, and 200 mL of concentrated H3PO4, diluted to 1 L) Zimmerman reagent is equal ...

science(chem) Please Please Please check by today
How many ml of 0.8M KOH should be added to 5.02g of 1,5 pentatonic acid (H2A) Mwt= 132.11 to give a pH of 4.4 when diluted to 250ml before the first eq point pKa1= 4.345 Is the answer 25.2ml? If that IS correct then I need help b/c I can't get that answer... I've got it but I ...

fianance
can you check my answers if they are correct thank you 1.) A convertible bond is currently selling for $945. It is convertible into 15 shares of common which presently sell for $57 per share. What is the conversion premium? A. $90 B. $45 C. 57 shares D. 13 shares Answer c 2.) ...

Psychology
You are to evaluate how well the author used the points described in the text book about conformity and persuasion to explain their reasons for selecting Donnie. In 200 to 300 words. I think Donnie would more likely be persuaded by peer pressures. Although he's the same age as...

Chemistry 12
9. According to Arrhenius, which of the following groups contain: i)only acids ii)only bases a. NaOH, H2CO3, KCl b. MgCl2, H2SO4, HCl c. HNO3, HCl, H3PO4 d. Mg(OH)2, AgBr, HF e. KOH, NH4OH, Ba(OH)2 10. Enough water is added to 100 g of sodium hydroxide in order to obtain a one...

Unit 4 - Investing
Compare a regular cash dividend with a periodic share repurchase. Which has greater appeal to you? Explain. Explain a stock dividend and further explain if you would perfer it to a cash dividend. What are stock splits and how desirable are they? Please help me understand. ...

Science
Please check my answers (at the bottom) with these questions. 1. An apple quickly changes color when exposed to air. This demonstrates a ________. (1 point) physical property chemical property physical change all of the above 2. When a chunk of dry ice is at room temperature, ...

chemistry
0.702g of arsenic an oxide of arsenic mass 0.927g how do i calculate the mass of oxygen that combines with 1 mole of arsenic atoms to form the oxide of arsenic. how many moles of oxygen atoms does this mass represent a and then using that answer i have to obtain an empiricl ...

Science/CHEM
Part 1 Chapt 4 1. You dissolve 157.1 g of ammonium nitrate in a 250 mL volumetric flask and add water to the mark (call this solution A). You take 30 mL of solution A and place it in a 100 mL volumetric flask and add water to the mark (this is solution B). Next you take 50 mL ...

chemistry
1 In the reaction of potassium permanganate and iron salt in acidic medium, how many moles of manganese reacted with iron? 2 moles of Mn with 1 mole of Fe 1 mole of Mn with 5 moles of Fe 1 mole of Mn reacts with 1 mole of Fe 5 moles of Mn reacts with 1 mole 2 Which of the ...

chemistry
1 In the reaction of potassium permanganate and iron salt in acidic medium, how many moles of manganese reacted with iron? 2 moles of Mn with 1 mole of Fe 1 mole of Mn with 5 moles of Fe 1 mole of Mn reacts with 1 mole of Fe 5 moles of Mn reacts with 1 mole 2 Which of the ...

Chemistry
Quick question, since FePO4 is insoluble, will that mean a precipitate will form? During the experiment I don't remember seeing a precipitate. Is that my error, or is the precipitate hard to see? Sure. Adding Na3PO4 will make a big difference. FePO4 is almost completey ...

chemisrty
1 When chemicals pour on the skin, the laboratory first aid is to ---------------. Apply 1% sodium carbonate Apply 1% boric acid solution Flush the eye with a copious amount of clean lukewarm running water Wash with soap and warm water 2 For cut sustained in the laboratory ...

chemistry
When chemicals pour on the skin, the laboratory first aid is to ---------------. Apply 1% sodium carbonate Apply 1% boric acid solution Flush the eye with a copious amount of clean lukewarm running water Wash with soap and warm water 2 For cut sustained in the laboratory which...

Itroduction to finance
Anaswer all questions You have been commissioned to analyse the financial statements of MILOPA LIMITED. Below are the Consolidated statement of financial position and the Statement of Comprehensive Income of the companies. STATEMENTS OF FINANCIAL POSITION as at 31 December ...

chemistry
Which of the following pairs of molecules have the same oxidation number for carbon? CO and CO2 CH4 and CCl4 C6H12O6 and C(s) H2CO and COCl2 Carbon always has an oxidation number of +4 What mass of CuSO4.5H2O would you need to prepare 250.0 mL of a 0.250 M solution? [MW of ...

Health
Does anyone know a site where I can find good slang terms for cocaine? I have a project on cocaine due Wednesday and I need to memorize all of the slang terms. Go to google and look up slang drug terms. Take the link for the pride website and go to the section with c for ...

  1. Pages:
  2. <<Prev
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. 6
  9. 7
  10. 8
  11. 9

Post a New Question