# crate tension

3,930 results, page 3

### physics 1401

a 15kg crate initially at rest slides down a ramp 2m long and inclined at an angle of 20 degrees with the horizontal. If there is no friction between the ramp surface and crate, what is the velocity of the crate at the bottom of the ramp?

### physics

A 1520-N crate is to be held in place on a ramp that rises at 30.0° above the horizontal. The massless rope attached to the crate makes a 22.0° angle above the surface of the ramp. The coefficients of friction between the crate and the surface of the ramp are ìk= 0.450 and...

### Physics

The coefficient of static friction between the 3.78 kg crate and the 38° incline is 0.306. What minimum force must be applied to the crate perpendicular to the incline to prevent the crate from sliding down the incline? The acceleration of gravity is 9.8 m/s^2. Answer in ...

### physics

A 100 N force is applied to the side of a crate resting on a level floor. The crate has a mass of 50 kg. If the coefficient of static friction is ìs = .25, is the 100 N force enough to make the crate accelerate? Explain why or why not.

### PHYSICS

A crate of potatoes of mass 9.0 kg is on a ramp with angle of incline 30° to the horizontal. The coefficients of friction are μs = 0.69 and μk = 0.41. Find the frictional force (magnitude and direction) on the crate if the crate is at rest. magnitude N? thanks

### physics

A crate of potatoes of mass 13.0 kg is on a ramp with angle of incline 30° to the horizontal. The coefficients of friction are μs = 0.76 and μk = 0.35. Find the frictional force (magnitude and direction) on the crate if the crate is sliding up the ramp.

### physics

A worker in a warehouse uses a rope passing through some pulleys to lift a heavy crate. The worker exerts a force five times less than the weight of the crate but has to move the rope four times as far as the crate moves. This situation... A) can happen because the extra ...

### physics

A flatbed truck is carrying a heavy crate. The coefficient of static friction between the crate and the bed of the truck is 0.66.What is the maximum rate at which the driver can decelerate and still avoid having the crate slide against the cab of the truck?

### Pre-AP Physics

A flatbed truck is carrying a heavy crate. The coefficient of static friction between the crate and the bed of the truck is 0.47. What is the maximum rate at which the driver can slow and avoid having the crate slide against the cab of the truck?

### physics

A crate of mass 55.6 kg is being transported on the flatbed of a pickup truck. The coefficient of static friction between the crate and the trucks flatbed is 0.330, and the coefficient of kinetic friction is 0.320. (b) The truck barely exceeds this acceleration and then moves ...

### Physics

Can anyone explain this to me, it was on my exam and i don't get it ; A 14.0 kg crate is pulled up a rough incline with an initial speed of 1.6 m/s. The pulling force is 131.0 N parallel to the incline, which makes an angle of 12.3 ◦ with the horizontal. The coeﬃ...

### physics

i apply an 800 N force to the crate a. how long would it take the crate to travel 20m across the warehouse floor(in the direction that i am pushing it)? b. what is the magnitude and direction of the force of friction acting on the crate?

### physics

i apply an 800 N force to the crate a. how long would it take the crate to travel 20m across the warehouse floor(in the direction that i am pushing it)? b. what is the magnitude and direction of the force of friction acting on the crate?

### Physics helppp

A crate of potatoes of mass 9.0 kg is on a ramp with angle of incline 30° to the horizontal. The coefficients of friction are μs = 0.69 and μk = 0.41. Find the frictional force (magnitude and direction) on the crate if the crate is at rest. magnitude N? thanks

### physics

A crate of potatoes of mass 12.0 kg is on a ramp with angle of incline 30° to the horizontal. The coefficients of friction are μs = 0.69 and μk = 0.43. Find the frictional force (magnitude and direction) on the crate if the crate is sliding down the ramp.

### physcial science

a 50 kg crate is lifted to a height of 10 meters. a. how much potential energy does the crate have after being lifted? b. if it took 5 seconds to lift the crate, using a machine what was the power rating of the machine?

### dynamics

The free-rolling ramp has a weight of 135 lb The crate whose weight is 72 lb slides from rest at A , 15ft down the ramp to B. The ramps is also at rest when the crate is at A. Assume that the ramp is smooth, and neglect the mass of the wheels. basicall the picture looks like ...

### Science

a truck is carrying a 2800 kg crate of heavy machinery. if the coefficient of static friction between the crate and the bed of the truck is 0.55, what is the maximum rate the driver can decelerate when coming to a stop in order to avoid crushing the cab with the crate? THANK ...

### physics

Two wooden crates with masses are as shown are tied together by a horizontal cord. Another cord is tied to the first crate and it is pulled with a force of 199N at a angle of 20.0 degrees. Each crate has a coefficient of kinetic friction of 0.55 . Find the tension in the ropes...

### physics

A 46.2-kg crate rests on a level floor at a shipping dock. The coefficients of static and kinetic friction are 0.566 and 0.440, respectively. What horizontal pushing force is required to (a) just start the crate moving and (b) slide the crate across the dock at a constant speed?

### physics

A 50.9-kg crate rests on a level floor at a shipping dock. The coefficients of static and kinetic friction are 0.526 and 0.311, respectively. What horizontal pushing force is required to (a) just start the crate moving and (b) slide the crate across the dock at a constant speed?

### physics

A 50.9-kg crate rests on a level floor at a shipping dock. The coefficients of static and kinetic friction are 0.526 and 0.311, respectively. What horizontal pushing force is required to (a) just start the crate moving and (b) slide the crate across the dock at a constant speed?

### PHYSICS

A 50.5-kg crate rests on a level floor at a shipping dock. The coefficients of static and kinetic friction are 0.624 and 0.364, respectively. What horizontal pushing force is required to (a) just start the crate moving and (b) slide the crate across the dock at a constant speed?

### Physics

A horizontal force of 150 N is used to push a 33.0 kg packing crate a distance of 6.65 m on a rough horizontal surface. If the crate moves at constant speed and the work done is 997.5 joules. What is the coefficient of kinetic between the crate and the surface.

### physics

A crate of mass 20 kg is pushed up a frictionless ramp by a person as shown in the figure below. Calculate the work done by the person in pushing the crate a distance of 15 m as measured along the ramp. Assume the crate moves at a constant velocity.

### physics

A crate pushed along the floor with velocity \vec{v} _{i} slides a distance d after the pushing force is removed.If the mass of the crate is doubled but the initial velocity is not changed, what distance does the crate slide before stopping?

### physics

crate weighing 6.90 x 10^3 N is pulled up a 46° incline by a force parallel to the plane. If the coefficient of kinetic friction between the crate and the surface of the plane is 0.750, what is the magnitude of the applied force required to move the crate at a constant velocity?

### Physics

A 284 kg crate is pulled along a level surface by an engine. The coefficient of kinetic friction between the crate and the surface is 0.513. How much power must the engine deliver to move the crate at a constant speed of 7.2 m/s?

### Physics

A large crate filled with physics laboratory equipment must be moved up an incline onto a truck. 1. The crate is at rest on the incline. What can you say about the force of friction acting on the crate? a. The friction force point up the include b. The friction force point ...

### Physics to drwl please help

A crate of oranges weighing 209 N rests on a flatbed truck 2.0 m from the back of the truck. The coefficients of friction between the crate and the bed are μs = 0.41 and μk = 0.20. The truck drives on a straight, level highway at a constant 7.5 m/s. (a) What is the ...

### Physics 1

A crate of mass 48 kg is pushed up a frictionless ramp by a person as shown in the figure below. Calculate the work done by the person in pushing the crate a distance of 11 m as measured along the ramp. Assume the crate moves at constant velocity. _____J

### physics

Two crates rest on top of one another.There is a crate of mass 4.62 kg on top of another crate of mass 2.19 kg. The coefficient of friction between the lower crate and the floor is μk = 0.440 and the coefficient of static friction between the two crates is μs = 0.870. If the...

### Physics please help its urgent i need help

A crate of oranges weighing 209 N rests on a flatbed truck 2.0 m from the back of the truck. The coefficients of friction between the crate and the bed are μs = 0.41 and μk = 0.20. The truck drives on a straight, level highway at a constant 7.5 m/s. (a) What is the ...

### physics

Two workers are loading crates onto a pick up truck. Worker 1 lifts his crate straight up from the ground to the truck. Worker 2 slides his crate up a ramp which has frictionless rollers. Which statement is true about the work being done on the crate?

### Repost-Physics 1

A crate of mass 48 kg is pushed up a frictionless ramp by a person as shown in the figure below. Calculate the work done by the person in pushing the crate a distance of 11 m as measured along the ramp. Assume the crate moves at constant velocity. _____J

### Physics

A crate is pulled by a rope making 30 degrees with the horizontal. If the work done to move it in 15 m is 2000 J, find the tension in the rope.

### physics

A crate of mass 45.0 kg is being transported on the flatbed of a pickup truck. The coefficient of static friction between the crate and the truck's flatbed is 0.360, and the coefficient of kinetic friction is 0.160. (a) The truck accelerates forward on level ground. What is ...

### Physics! plese help

A 1320-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the tension in the wire and the magnitudes of the (b) ...

### Physics

Pete slides a crate up a ramp at an angle of 20 degrees by exerting a 244 N force parallel to the ramp. The crate moves at a constant speed. The coefficient of friction is 0.19. How much work did Pete do when the crate was raised a vertical distance of 2.39 m? Answer in units ...

### physics

Pete slides a crate up a ramp at an angle of 25◦ by exerting a 290 N force parallel to the ramp. The crate moves at a constant speed. The coefficient of friction is 0.28. How much work did Pete do when the crate was raised a vertical distance of 2.24 m? Answer in units of J

### physics

If Frankie the kangaroo climbed out of the crate and pushed the crate with a mighty 12 newtons of force against the efforts of Fred and the man (each applying 10 newtons of force), what would be the net force on the crate from all the pushing?

### Physics

Hi!! For this question, I feel like the answer is C but I'm not sure. If the answer is C, could you explain to me why/ if it isn't then why not? A book leans against a crate on a table. Neither is moving. Which of the following statements concerning this situation is correct? ...

### college physics

A man pushing a crate of mass m = 92.0 kg at a speed of v = 0.860 m/s encounters a rough horizontal surface of length = 0.65 m as in the figure below. If the coefficient of kinetic friction between the crate and rough surface is 0.355 and he exerts a constant horizontal force ...

### Physics

A rope exerts a constant horizontal force of 203N pulling a 68-kg crate across the floor. The velocity of the crate is observed to increase from 3m/s to 5m/s in a time of 4 seconds under the influence of this force and the frictional force exerted by the floor on the crate.

### Physics HELP!

A crate of mass 52.8 kg is being transported on the flatbed of a pickup truck. The coefficient of static friction between the crate and the trucks flatbed is 0.351, and the coefficient of kinetic friction is 0.305. (a) The truck accelerates forward on level ground. What is the...

### physics

A crate of mass 59.3 kg is being transported on the flatbed of a pickup truck. The coefficient of static friction between the crate and the trucks flatbed is 0.357, and the coefficient of kinetic friction is 0.304. (a) The truck accelerates forward on level ground. What is the...

### physics

A crate rests on a flatbed truck which is initially traveling at 17.8 m/s on a level road. The driver applies the brakes and the truck is brought to a halt in a distance of 33.1 m. If the deceleration of the truck is constant, what is the minimum coefficient of friction ...

### physics

A flatbed truck is carrying a 2540 kg crate of heavy machinery. If the coefficient of static friction between the crate and the bed of the truck is 0.540 , what is the maximum rate (in meters/second^2) that the driver can decelerate when coming to a stop, in order to avoid ...

### physics

A flatbed truck is carrying a 2610kg crate of heavy machinery. if the coefficient of static friction between the crate and the bed of the truck is 0.530, what is the maximum rate(in meters/second^2) that the driver can decelerate when coming to a stop in order to avoid cruhing...

### Physics URGENT!!!

A crate of mass 52.8 kg is being transported on the flatbed of a pickup truck. The coefficient of static friction between the crate and the trucks flatbed is 0.351, and the coefficient of kinetic friction is 0.305. (a) The truck accelerates forward on level ground. What is the...

### Physics

A rope attached to an engine pulls a 240 Newton crate up an 14.7 degree ramp at a constant speed. The coefficient of kinetic friction for the surfaces of the crate and ramp is .32. What is the magnitude of the force that the rope exerts on the crate parallel to the ramp? (...

### Physics- Elena please help!

A crate of mass 52.8 kg is being transported on the flatbed of a pickup truck. The coefficient of static friction between the crate and the trucks flatbed is 0.351, and the coefficient of kinetic friction is 0.305. (a) The truck accelerates forward on level ground. What is the...

### Physics

Dr. Miller pulled a wooden crate at a constant accelerationof 1.23 meters per second per second with a forceof 752 newtons at an angle of 22 degrees above the horizontal. The coefficient of kinetic friction between the crate and the floor was 0.347. Find the mass of the crate.

### physics

Pete slides a crate up a ramp at an angle of 27◦ by exerting a 242 N force parallel to the ramp. The crate moves at a constant speed. The coeﬃcient of friction is 0.4. How much work did Pete do when the crate was raised a vertical distance of 2.22 m? Answer in ...

### Physics

A 40 kg crate is pulled across the ice with a rope. A force of 90 N is applied at an angle of 36 degreees with the horizontal. Neglecting friction, calculate: the acceleration of the crate; the upward force the ice exerts on the crate as it is pulled

### wayne

A crate of potatoes of mass 19.0 kg is on a ramp with angle of incline 30° to the horizontal. The coefficients of friction are ìs = 0.68 and ìk = 0.36. Find the frictional force (magnitude and direction) on the crate if the crate is sliding up the ramp magnitude? direction?

### physics

To push a 16 kg crate up a frictionless incline, angled at 32° to the horizontal, a worker exerts a force of 108.0 N, parallel to the incline. As the crate slides 1.50 m, how much work is done on the crate by the worker's applied force?

### Physics PLEASE HELP

A 50-kg crate is pulled across the ice with a rope. A force of 100 N is applied at an angle of 38° with the horizontal. Neglecting friction, calculate the acceleration of the crate AND the upward force the ice exerts on the crate as it is pulled.

### PHYSICSSS HELP PLEASE

A crate of potatoes of mass 9.0 kg is on a ramp with angle of incline 30° to the horizontal. The coefficients of friction are μs = 0.69 and μk = 0.41. Find the frictional force (magnitude and direction) on the crate if the crate is at rest. magnitude N direction

### Physics

A 100 kg crate rest at the back of the bed of a pick up truck. The length of the crate is 1 m in the length of the bed is 4 m. There is no friction between the bed of the truck in the crate. If the truck is traveling at 25 m/s just before it hits the wall, how long before the ...

### transportation economic

In your own words, describe the meaning of marginal cost. You normally buy a crate of wine for $75. One crate has 6 bottles of wine. After a month, the store clerk informs you that the same crate of wine now costs $82. However, there are 7 bottles in a crate. To the nearest ...

### physics

A 180-kg crate is sitting on the flatbed of a moving truck. The coefficient of sliding friction between the crate and the truck bed is 0.30. Two taut cables are attached to either side of the crate. Each cable can exert a maximum horizontal force of 650 N either forward or ...

### physics

A 220-kg crate rests on a surface that is inclined above the horizontal at an angle of 19.4°. A horizontal force (magnitude = 525 N and parallel to the ground, not the incline) is required to start the crate moving down the incline. What is the coefficient of static friction ...

### Physics

A crate is placed on an inclined board as shown in the figure below. One end of the board is hinged so that the angle θ is adjustable. If the coefficient of static friction between the crate and the board is μS = 0.37, what is the value of θ at which the crate ...

### physics

A 214-kg crate rests on a surface that is inclined above the horizontal at an angle of 19.4°. A horizontal force (magnitude = 541 N and parallel to the ground, not the incline) is required to start the crate moving down the incline. What is the coefficient of static friction ...

### dynamics of rigid bodies

10. The flatbed truck is traveling at constant speed of 60 kph up the 15% grade when the 100 kg crate which it carries is given a shove which imparts to an initial relative velocity x = 3m/s towards the rear of the truck. If the crate slides a distance x = 2 m measured on the ...

### Physics

Once a 15 kg crate is in motion on a horizontal ﬂoor, a horizontal force of 51 N keeps the crate moving with a constant velocity. The acceleration of gravity is 9.81 m/s What is µk, the coeﬃcient of kinetic friction, between the crate and the ﬂoor?

### physics

Once a 15 kg crate is in motion on a horizontal ﬂoor, a horizontal force of 56 N keeps the crate moving with a constant velocity. The acceleration of gravity is 9.81 m/s 2. What is µk, the coeﬃcient of kinetic friction, between the crate and the ﬂoor?

### physics

Once a 28 kg crate is in motion on a horizontal ﬂoor, a horizontal force of 51 N keeps the crate moving with a constant velocity. The acceleration of gravity is 9.81 m/s. What is µk, the coeﬃcient of kinetic friction, between the crate and the ﬂoor

### Phyisics

Once a 26 kg crate is in motion on a horizontal ﬂoor, a horizontal force of 64 N keeps the crate moving with a constant velocity. The acceleration of gravity is 9.81 m/s 2 . What is µk, the coeﬃcient of kinetic friction, between the crate and the ﬂoor?

### Physics

A wooden crate sits on the floor of a flatbed truck that is initially at rest, and the coefficient of static friction between the crate and the floor of the truck is 0.25. The driver of the truck wants to accelerate to a velocity of 20 m/s within 4.0 s. If he does so, will the...

### physics

A 125 kg crate rests on the flatbed of a truck that moves at a speed of 15.0 m/s around an unbanked curve whose radius is 66.0m. This crate does not slip relative to the truck. Obtain the magnitude of the static frictional force that the truck bed exerts on the crate. If you ...

### physics

A man tries to push a crate of 8kg across a rough surface. The static friction coefficient is 0.6 and the kinetic friction coefficient is 0.4. Calculate the friction force exerted on the crate if: a) a horizontal force of 45 N is exerted on the crate and b) a horizontal force ...

### Physics

A 20 kg crate is placed on a horizontal conveyor belt. The materials are such that us = 0.47 and uk = 0.21. What is the maximum acceleration the belt can have without the crate slipping? If acceleration of the belt exceeds the value determined in part A, what is the ...

### Physics

Sally applies a horizontal force of 500 N with a rope to dtag a wooden crate across a floor with a constant speed. The rope tied to the crate is pulled at an angle of 67.5 degrees. a) How much force is exerted by the rope on the crate? b) What work is done by Sally if the ...

### physics

A worker exerts a 140 N horizontal force on a 41 kg crate. The crate's acceleration across a level floor is 0.90 m/s2. Find the frictional force that the floor exerts on the crate.

### Physics

You are pulling a 60-kg crate across a level floor with a rope. If a force of 200 N on the rope gives the crate an acceleration of 2 m/s2, what is the force of friction that the crate exerts on the floor?

### physics

You push an 20-kg crate up an inclin with an angle of 35 degrees to the horizontal with a force of 260-N. If the crate is moving at a constant velocity: 1. what is the component of the crate's weight parallel to the surface? 2. WHat is the sum of the forces parallel to the ...

### Physics

An electric motor is rated to have a maximum power output of 0.72 hp. If this motor is being used to lift a crate of mass 188 kg, how fast (i.e., at what speed) can it lift the crate? Hint: Assume the only other force on the crate is the force of gravity.

### physics

A crane is used to hoist a 500kg crate vertically at a constant velocity of 4 meters per second. Ignore the effects of friction. a) calculate the magnitude of the net force experienced by the crate b) calculate the magnitude of the force applied by the cable on the crate

### math

The diagonal brace of a shipping crate is 53 inches. The length of the shipping crate is 45 inches. Find the height of the shipping crate. please help!

### Physics

Maricruz slides a 66 kg crate, m, up an inclined ramp 2.0 m long and attached to a platform 1.0 m above floor level, as shown in Figure 10-19. A 415 N force, F, parallel to the ramp, is needed to slide the crate up the ramp at a constant speed. (a) How much work does Maricruz ...

### Mechanics, Waves and Optics

A crate with a total mass of 18.0 kg is pulled by a person along the floor at a constant speed by a rope. The rope is inclined at 20 degree above the horizontal, and the crate moves 20.0 m on a horizontal surface. The coefficient of kinetic friction between the floor and the ...

### Physics

A man pushes a 200 N crate up a frictionless incline with a slope of 20 degrees. The crate is raised by 4 m as shown. Assuming the crate moves at constant speed, what is the work done by the man?. I know Work = Force x Displacement. The answer is 800 N. Why is the displacement...

### physics

a 20 kg crate is initially moving down a wall at a speed of 2.0 m/s. Determine the magnitude of the average force exerted by the person in order to stop the crate's downward motion in a distance of .50 m. The person pushes in a direction 53 degrees above the horizontal, and ...

### General Engineering

A drag line is connected to an electric motor. Crates are hooked onto the line and dragged horizontally from one location within the factory to another across a series of rollers. There is 15° between the crate and motor and a force of 500N Each crate has a mass of 200kg. ...

### physics

A crate with a mass of 80 kg glides through a space station with a speed of 2.5 m/s. An astronaut speeds it up by pushing on it from behind with a force of 210 N, continually pushing with this force through a distance of 8 m. The astronaut moves around to the front of the ...

### Physics

A 1440-kg crate of cabbages is laid on a level, frictionless track at the end of a heavy spring. The spring is compressed a distance of 0.100 m by a force of 83500 N. When the spring is released, it propels the crate. the spring constant of the spring equals 835000 N/m. What ...

### Physics

A 1440-kg crate of cabbages is laid on a level, frictionless track at the end of a heavy spring. The spring is compressed a distance of 0.100 m by a force of 83500 N. When the spring is released, it propels the crate. the spring constant of the spring equals 835000 N/m. What ...

### physics

A 248-kg crate rests on a surface that is inclined above the horizontal at an angle of 19.5°. A horizontal force (magnitude = 537 N and parallel to the ground, not the incline) is required to start the crate moving down the incline. What is the coefficient of static friction ...

### physics

A plane flying horizontally above Earth’s surface at 150. meters per second drops a crate. The crate strikes the ground 30.0 seconds later. What is the magnitude of the horizontal component of the crate’s velocity just before it strikes the ground? I know the answer is 150...

### math

A crate weighing 400N rests on aplane inclined at an angle of 20 degrees to the horizontal. there is a force of friction of 120N acting up the ramp. Determine (i) the resultant force acting on the crate, (ii) the contact,or normal force between the ramp and the crate.

### Ff

The coefficient of static friction between the m = 3.50 kg crate and the 35.0° incline of Figure P4.41 is 0.340. What minimum force must be applied to the crate perpendicular to the incline to prevent the crate from sliding down the incline? Your response differs from the ...

### Physics

A large statue in a crate is being moved. The mass of the statue and the crate is 150 kg. As the statue slides down a ramp inclined at 40.0°, the curator pushes up, parallel to the ramp’s surface, so that the crate does not accelerate. If the statue slides 3 m down the ramp...

### Physics

A person pulls a crate with 120 N of force against 100 N of friction a distance of 5 meters. Find the energy the person expends pulling the crate, the amount of energy converted to heat via friction, and the increase in the kinetic energy of the crate.

### Physics

You have been asked to keep a 35.1 kilogram crate from sliding down a 50.03° incline. The coefficient of friction between the crate and the incline is 0.26, and it's on the surface of Mars (gravitational acceleration at the surface of Mars is 3.75 m/s^2). How much force must ...

### Physics

A man uses a pulley arrangement to lift a heavy crate.He applies a force that is one-fourth the weight of the crate, but moves the rope a distance four times the height that the create is lifted. Is the work done by the man greater than, equal to, or less than the work done by...

### physics

A crate of eggs is located in the middle of the flat bed of a pickup truck as the truck negotiates an unbanked curve in the road. The curve may be regarded as an arc of a circle of radius 36.5 m. If the coefficient of static friction between crate and truck is 0.590, how fast ...

### Math

A crate has 5 times as many apples as oranges. If there are 120 pieces of fruit in the crate, and there are only apples and oranges in the crate, then how many oranges are there?