calculate pH at equivalence point in titrating 0.120M solution of 0.08M HBr

64,096 results, page 3

Chemistry

calculate the pH and the pOH of an aqueous solution that is 0.035 M In HCI and 0.080 M in HBr?

Chemistry

Calculate the pH and the pOH of an aqueous solution that is 0.025 M in HCl(aq) and 0.075 M in HBr(aq) at 25°C.

Chemistry

If a chemist has a stock solution of HBr that is 10.0 M and would like to make 450.0 mL of 3.0 M HBr, how would he or she do it?

CHEMISTRY !!! HELP !

Calculate the pH of the solution after the addition of the following amounts of 0.0617 M HNO3 to a 70.0 mL solution of 0.0750 M aziridine. The pKa of aziridinium is 8.04. 1)Volume of HNO3 equal to the equivalence point 2)89.5mL of HNO3 I got pH= 7.37 for 1 but i believe I ...

Chemistry

Sodium hypochlorite, NaClO, is added as a disinfectant to the water supply. You are analyzing a sample from the supplier to verify its purity and you prepare to titrate 250.0 mL of a solution containing 1.86 g of NaClO with a 1.00 M HCl solution. What is the pH of the solution...

Chemistry

3) A student dissolves a 1.18g aspirin tablet in water and titrates the solution with a .265M NaOH. 22.05mL of NaOH are required to reach the equivalence point. Calculate the percentage of acetylsalicylic acid in the tablet.

Chemistry

What is the pH for the potassium propionate solution at the equivalence point?

chemistry

A chemistry student weighs out 0.172 grams of acrylic acid (HCH2CHCO2) into a volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1800 moles/liter NaOH solution. Calculate the volume of NaOH solution the student will need to add ...

Chemistry

In a titration of 35 mL of 0.40 M H3PO4 with 0.30 M KOH solution, what volume (in mL) of KOH solution is needed to reach the last equivalence point (i.e., point in the titration where enough KOH has been added to neutralize all three of the acidic protons in the phosphoric acid)?

1CHEM

In a titration of 35 mL of 0.40 M H3PO4 with 0.30 M KOH solution, what volume (in mL) of KOH solution is needed to reach the last equivalence point (i.e., point in the titration where enough KOH has been added to neutralize all three of the acidic protons in the phosphoric acid)?

Chemistry

In a titration of 35 mL of 0.40 M H3PO4 with 0.30 M KOH solution, what volume (in mL) of KOH solution is needed to reach the last equivalence point (i.e., point in the titration where enough KOH has been added to neutralize all three of the acidic protons in the phosphoric acid)?

Chemistry

When titrating 50.0 mL of 0.10 M H2SO4 with 0.10 M NaOH, how many mL of NaOH will you have added to reach the 1st equivalence point? I am confused... What H2A problem? Chemistry-Dr.Bob222 - DrBob222, Tuesday, April 12, 2016 at 1:49am Refer to the H2A problem above BUT you only...

chemistry

A student dissolves a .726 g aspirin tablet in water and titrates the solution with .272 M NaOH are required to reach the equivalence point. Calculate the percentage of acetylsaliclic acid in the tablet. I am not really sure where to start with this. I unfamiliar with problems...

chemistry

calculate the pH. A solution is formed mixing 12.0 mL of .120 M HBr with 22.0mL of .180 M HCl

chemistry

18. Calculate ƒ´H for the following reaction using Hess law H2 (g) + Br2 (g) ¡÷ 2 HBr (g) Experimental information 2 H+ ¡÷ H2 ƒ´H -436.4 kJ 2 Br- ¡÷ Br2 ƒ´H -192.5 kJ 2 H+ + 2 Br- ¡÷2 HBr ƒ´H -144.8 kJ

chem

Assume that 35.0 mL of a 0.13 M solution of a weak base B that accepts one proton is titrated with a 0.13 M solution of the monoprotic strong acid HX. (a) How many moles of HX have been added at the equivalence point?

Chemistry

A chemistry student weighs out 0.123 grams of chloroacetic acid into a 250. milliliter volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.2100 moles/liter NaOH solution. Calculate the volume of NaOH solution the student will need...

Chemistry

Determine the entropy change when 1.80 mol of HBr(g) condenses at atmospheric pressure? I got that DeltaS fus = 12.922J/(k*mol) Delta S Vapour = 93.475J/(K*mol) the only thing I don't get is the entropy change when 1.80 mol of HBr(g) condenses at atmospheric pressure. How do I...

Chemistry titrations

25.00mL of an unknown sulfuric acid solution is titrated to the second equivalence point with 21.02mL of 0.420M potassium hydroxide solution. What is the concentration of the sulfuric acid solution?

Chemistry

chemistry student weighs out 0.123 grams of chloroacetic acid (HCH2ClCO2) into a 250. milliliter volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1200 moles/liter NaOH solution. Calculate the volume of NaOH solution the student...

Chemistry

A chemistry student weighs out 0.123 grams of chloroacetic acid (HCH2ClCO2) into a 250. milliliter volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1200 moles/liter NaOH solution. Calculate the volume of NaOH solution the ...

Chemistry

A chemistry student weighs out 0.123 grams of chloroacetic acid (HCH2ClCO2) into a 250. milliliter volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1200 moles/liter NaOH solution. Calculate the volume of NaOH solution the ...

Chemistry

Explain why the volume of 0.100 M NaOH required to reach the equivalence point in the titration of 25.00 mL of 0.100 M HA is the same regardless of whether HA is a strong or weak acid, yet the pH at the equivalence point is not the same

Chemistry

Calculate the pOH of an aqueous solution of 146.6 ml of 0.000625 M HBr(aq) after dilution to 850 ml.

Chemistry

Calculate the pOH of an aqueous solution of 146.6 ml of 0.000625 M HBr(aq) after dilution to 850 ml.

Chemistry

Calculate the pOH of an aqueous solution of 146.6 ml of 0.000625 M HBr(aq) after dilution to 850 ml.

chemistry

An HNO3 solution has a pH of 3.04. What volume of 0.015 M LiOH will be required to titrate 89.0 mL of the HNO3 solution to reach the equivalence point?

Chemistry

I really don't know how to approach this problem and I really need help. Using the average molarity of your initial acetic acid solutions, the initial volumes, and the volume of NaOH added to reach the equivalence point, calculate the [C2H3O2-] concentration at the equivalence...

chemistry

A solution of NaOH with pH 13.68 requires 35.00 mL of 0.128 M HClO_4_ to reach the equivalence point. What is the volume of the NaOH solution?

Analytical chemistry help!

Calculate the pH of a solution made by mixing 50.00 mL of 0.100 M NaCN (Ka of HCN = 6.2 x 10-10) with a) 4.20 mL of 0.438 M HClO4 and b) 11.82 mL of 0.438 M HClO4. What is the pH at the equivalence point with 0.438 M HClO4?

chem

How is the number of moles of NaOH affected at the equivalence point of the solution?

Chemistry

Suppose 50.0 mL of an aqueous solution containing an unknown monoprotic weak acid is titrated with 0.250 M KOH. The titration requires 31.52 mL of the potassium hydroxide solution to reach the equivalence point. What is the concentration (in molarity) of the unknown acid ...

chemistry

equilibrium constant = 2.180 x 10^6 @ 730 C. H2 (g) + Br (g) <=> 2HBr (g) (reversible) startin with 3.20 moles of HBr in a 21.3-L reaction vessel, calculate the concentrations of H2, Br2, and HBr at equilibrium idk how to start my ice table

chemistry

A 27.00 mL sample of an unknown H3PO4 solution is titrated with a 0.110 M NaOH solution. The equivalence point is reached when 25.78 mL of NaOH solution is added. What is the concentration of the unknown H3PO4 solution? The neutralization reaction is: H3PO4(aq) + 3NaOH(aq) -&...

chemistry

a sodium hydroxide solution was prepared according to the procedure outlined in this weeks experiment. This sodium hydroxide solution was standardized by by titration against exactly 10mL of a 0.28M hydrochloric acid solution. In three titrations, the volumes of the sodium ...

Chem

What is different about neutralization reactions that produce a neutral solution at the equivalence point and those that produce acidic or basic solution? I think it is the concentration of the reactants?

chemistry

Calculate the boiling point elevation of a solution containing 22.8 g of glucose (C6H12O6) dissolved in 672.0 g of water. Calculate the freezing point depression for the same solution.

chemistry

Calculate the boiling point elevation of a solution containing 22.8 g of glucose (C6H12O6) dissolved in 672.0 g of water. Calculate the freezing point depression for the same solution.

chemistry

A 300 mL solution of 0.0500 M HCl is titrated with 1.00 M KOH. How many mL of the KOH solution will be needed to reach the equivalence point of this titration? A.5 mL B.10 mL C.50 mL D20 mL E15 mL The answer i got was E. 15ml

Chemistry

Question: A 0.400 g sample of propionic acid was dissolved in water to give 50.00 mL of solution. This solution was titrated with 0.150 M NaOH. what was the pH of the solution when the equivalence point was reached? I'm not really sure how i would go about setting this up. ...

Chemistry

What is the pH at the equivalence point when 0.10 M HNO_3 is used to titrate a volume of solution containing 0.30 g of KOH?

Chemistry

1)What is the pH of a 0.25 M solution of acetate (CH3COO-) with a pKa of 4.76? 2)If the [OH] of a solution is 2.95 x 10-5M, what is the pH of the solution? 3)Determine the pH at the equivalence point when 25.00 mL of 0.1056 M CH3COOH is titrated with 0.1056 M NaOH. 4)Determine...

Chemistry

Hello, I have a question that reads: Using the average molarity of your initial acetic acid solutions, the initial volumes, and the volume of NaOH added to reach the equivalence point, calculate the [C2H3O2-] concentration at the equivalence point. You should report 4 ...

College Chemistry

Calculate the pH at the equivalence point in the titration of 55.0 mL of 0.180 M methylamine(Kb = 4.4 × 10−4) with 0.330 M HCl.

Science - Electrochemistry

In an experiment 0.0500 M AgNO3 was used to titrate 20 mL of 0.12 M NaCl solution. When silver electrode is used together with the pH electrode to measure potential at each point during the titration, the potential measured at equivalence point is 0.055 V. Unfortunately, a ...

Chemistry

The following data was obtained from titrating a solution containing 25 mL of 0.0100 M MgCl2 solution, 1 mL of NH3OH buffer, and 10 drops of Calmagite with EDTA. Calculate the concentration of EDTA. Report the answer with three sig figs. Please help it only shows a graph with ...

chemistry

A compound was found to be composed of the following amounts of elements: 20.00% wt% C, 26.64wt% O, 46.65 wt%N, and 6.71wt%H. A 6.125 grams sample of this compound dissolved in 46.205 grams of water as a solution was found to have a freezing point of -3.260C. The density of ...

Chemistry

It says prepare a theoretical titration of 25 mL of 0.1037 M formic acid (HCOOH; pKa= 3.75) solution (diluted to 100mL volume with deionized water) by 0.0964 M solution of KOH. It asks to determine the volume of KOH solution needed to reach equivalence point. But I don't even ...

Chemistry

10.00 mL of an unknown base solution is titrated with .100 M HCl solution. The pH versus the volume of NaOH added is shown below. There is a graoh where there are two dotted lines signifying a pH: the highest at pH 6.31 and the lower at pH 3.92. What is the pOH pf the solution...

Chem

if 0.24o moles of a monoprotic weak acid is titrated with NaOH, what is the PH of the solution at the 1/2 equivalence point.

chemistry

For the titration of 50.00 mL of 0.1000 M ammonia with 0.1000 M HCl, calculate the pH (a) before the addition of any HCl solution, (b) after 20.00 mL of the acid has been added, (c) after half of the NH3 has been neutralized, and (d) at the equivalence point.

analytical chemistry

your lab possesses a stock solution of NaOH whose concentration is approx. 0.1M. you prepare a secondary solution by diluting 15.00mL of this stock solution to a total volume of 250.0 mL. you titrate a 50.00mL aliquot of the secondary solution with a hydrochloric acid solution...

Physics

I did the problem but i'm confused on what to do next: 1.A hunter aims directly at a target (on the same level) 120m away. (a) If the bullet leaves the gun at a speed of 250m/s, by how much will it miss the target? (b) At what angle should the gun be aimed so the target will ...

CHEMISTRY !!! HELP !

A 70.0 mL solution of 0.165 M potassium alaninate (H2NC2H5CO2K) is titrated with 0.165 M HCl. The pKa values for the amino acid alanine are 2.344 (pKa1) and 9.868 (pKa2), which correspond to the carboxylic acid and amino groups, respectively. Calculate pH of second equivalence...

CHEMISTRY

A 70.0 mL solution of 0.165 M potassium alaninate (H2NC2H5CO2K) is titrated with 0.165 M HCl. The pKa values for the amino acid alanine are 2.344 (pKa1) and 9.868 (pKa2), which correspond to the carboxylic acid and amino groups, respectively. Calculate pH of second equivalence...

chemistry

10.0 mL of a Cu2+ solution of unknown concentration was placed in a 250 mL Erlenmeyer flask. An excess of KI solution was added. Indicator was added and the solution was diluted with H2O to a total volume of 75 mL. The solution was titrated with 0.20 M Na2S2O3. The equivalence...

Chemistry

Calculate the theoretical pH at the starting point and at each equivalence point for phosphoric acid, acetic acid, and sulfuric acid. Please show the equilibrium equation, the Ka, and the pH calculation.

Chemistry

give a formula you can use to calculate the number of moles of H+ ions used at the equivalence point.

chemistry

The mean activity coefficients of HBrin 5.0 and 20.0 mmol kg –1 are 0.930 and 0.879, respectively. Consider a hydrogen electrode in HBr(aq) solution at 25 °C operating at 1.15 atm. Calculate the change in the electrode potential when the molality of the acid solution is ...

Chemistry

Calculate the molar solubility of MgF2 in 0.08M MgCl2 at 25 degrees C.

physics

To anticipate a dip and a bump in the road the driver of a car applies her break to produce ga uniform deceleration . Her speed is 100km/hr at the bottom A of the dip and 50km/hr at the top C of the hump which is 120m along the road from A . If the passengers experiences a ...

General Chemistry

1,When aqueous sodium hydroxide is added to a solution containing lead(II) nitrate, a soHowever, when additional aqueous hydroxide is added the precipitate redissolves forming a soluble [Pb(OH)4]2–(aq) complex ion.lid precipitate forms. 2,The Ksp of strontium carbonate, ...

Chemistry

If a solution contains 0.65mol of OH−, how many moles of H+ would be required to reach the equivalence point in a titration?

Chemistry

calculate the pH at 0ml at the quivalence point and at 40ml in a titration of 25 ml of .120M formic acid with .105M NaOH (kA of formic acid= 1.8x10^-4)

Chemistry

1. A solution is prepared such that it is 0.45 M in formic acid and 0.35 M in sodium formate. a) Where is this mixture located on a titration curve: before the buffer point, at the buffer point, or after the buffer point? b) Use the Henderson-Hasselbach to determine the pH of ...

Chemistry

Hello, i seem to be stuck on a problem and do'nt know why im not gettin the right answer.I have the he Ka and Kb values for each of the weak acids and bases from the chart and I keep getting zero and the second one 2.27*10^-24 is this correct?? Thank uu Solve an equilibrium ...

Chemistry

Hello, i seem to be stuck on a problem and do'nt know why im not gettin the right answer.I have the he Ka and Kb values for each of the weak acids and bases from the chart and I keep getting zero and the second one 2.27*10^-24 is this correct?? Thank uu Solve an equilibrium ...

Chemistry

Hello, i seem to be stuck on a problem and do'nt know why im not gettin the right answer.I have the he Ka and Kb values for each of the weak acids and bases from the chart and I keep getting zero and the second one 2.27*10^-24 is this correct?? Thank uu Solve an equilibrium ...

Chemistry

Calculate the boiling points of freezing points of the following solutions in water. a) boiling point of a 2.25m solution of propylene glycol (a non-electrolyte) b)freezing point of a 1.0m solution of potassium iodide c)freezing point of a 1.0m solution of nickel(II) nitrate d...

Chemistry

Write the net ionic equation for the reaction that occurs when aqueous solutions of barium hydroxide and hydrobromic acid are combined. I know that the first part of the formula would be BaOH + HBr but I do not know what the product would be since HBr is one thing. I do not ...

Chemistry

A solution contains 15 g non-volatile non-electrolyte solute C6H14O6 dissolved in 500 g of water at 40 c. Calculate (A)Vapor pressure of the solution. (B)Boiling point of the solution. (C)Freezing point of the solution.

CHEMISTRY

1. What is the vapor pressure at 25°C of a solution of 1.20g of nephtalene C10H8 in 25.6g of benzone C6H6? The vapor pressure of pure benzene at 23°C is 86.0mmHg the vapor pressure of naphthalene can be neglected. Calculate the vapor pressure lowering of the solution. 2. A ...

Chemistry

how many milliliters of 0.0850 m naoh are required to titrate 50.0 ml of a solution that contains 1.85 g of hcl per liter to the equivalence point?

Chemistry 2

A titration is performed by adding 0.124 M KOH to 40 mL of 0.159 M HNO3. a) Calculate the pH before addition of any KOH. b) Calculate the pH after the addition of 10.26, 25.65 and 50.29 mL of the base.(Show your work in detail for one of the volumes.) c) Calculate the volume ...

Chemistry

1) What is the vapor pressure at 25°C of a solution of 1.20g ofnephtalene C10H8 in 25.6g of benzone C6H6? The vapor pressure of pure benzene at 23°C is 86.0mmHg the vapor pressure of naphthalene can be neglected. Calculate the vapor pressure lowering of the solution. 2)A ...

Chemistry

Determine the molarity of na2co3 solution by titrating it against M/10 H2so4 solution

AP Chem

A mixture of 1.380 g of H2 and 66.80 g of Br2 is heated in a 2.00-L vessel at 700 K. These substances react as follows. H2(g) + Br2(g) equilibrium reaction arrow 2 HBr(g) At equilibrium the vessel is found to contain 0.605 g of H2. (a) Calculate the equilibrium concentrations ...

CHEMISTRY> HELP QUICK! pls

1. What is the amount of oxalate in 2 mL of 0.035M solution? a) 7 ¡Á 10¨C2 mole b) 1.75 ¡Á 10¨C2 mole c) 7 ¡Á 10¨C5 mole d) 1.75 ¡Á 10¨C5 mole 2. Sodium oxalate may be prepared by titrating oxalic acid (C2H2O4) with sodium hydroxide, according to the equation: ...

Chemistry

Calculate the pH at the equivalence point for the titration of 0.130M methalamine (CH3NH2) with 0.13M Hcl. The Kb of methyl amine is 5.0x10-4.

chemistry

A 40.0-mL sample of 0.100 M HNO2 is titrated with 0.200 M KOH. Calculate the volume required to reach the equivalence point (in mL)

high school chemistry

You are going to titrate 20 mL of .10M HCL with 0.10M NaOH. What is the pH at the equivalence point. How do I figure out the equivalence point when I have already figured out that the initial pH of the HCL and NaOH are both 1?

chem

why is it necessary to heat the oxalic acid solution before titrating it with the potassium permanganate solution

science

Determine the amount of NaoH dissolved in 250ml of the solution by titrating it against N/10 H2so4 solution

chemistry

A 27.00mL sample of an H2SO4 solution of unknown concentration is titrated with a 0.1422M KOH solution. A volume of 40.22mL of KOH was required to reach the equivalence point. What is the concentration of the unknown H2SO4 solution? Any help would be greatly appreciated. (:

Chemistry

a solution of HCL is approximately 0.1M and has to be standardized . 1.234g Na2CO3 are dissolved to make 100ml of solution. 20mL of this solution are titrated with the HCL solution, requiring 31.3mL for the second equivalence point. what is the exact concentration of the HCL ...

chemistry

Suppose that 50mL of a solution of sulfuric acid of unknown concentration was titrated with a 0.100M solution of sodium hydroxide. If it took 45.5 mL of titrant to reach the equivalence point, what was the concentration of the unknown solution of sulfuric acid???

Chemistry

pH indicators change color at their _____. The pH at which the color change happens for a particular indicator molecule depends on its: A. pKa; concentration. B. pKa; Ka or Kb. C. equivalence point; Ka or Kb. D. equivalence point; concentration. Is the correct answer A?

Chemistry

You are titrating 35.00 mL of a 1.20 M solution of HCOOH with a strong base. If you add 1.00 mL of a 3.60 M solution of sodium hydroxide, what is the final pH of the acid solution? The Ka for HCOOH is 1.8 X 10-4.

Chemistry 20 titration

1) oi50 . tinypic . com / ejh6vm . jpg The most suitable indicator for the titration is: A)methyl violet B)chlorophenol red C)methyl orange D)phenolphthalein 2-A base is titrated with an acid solution until the indicator changes colour. This change in the colour of the ...

Chemistry

Assume you dissolve 0.235 g of the weak acid benzoic acid, C6H5CO2H, in enough water to make 4.00*10^2 mL of solution and then titrate the solution with 0.138 M NaOH. C6H5CO2H(aq) + OH-(aq) C6H5CO2-(aq) + H2O(l) Find concentration of Na+ at equivalence point.

The following data was obtained from titrating a solution containing 25 mL of 0.0100 M MgCl2 solution, 1 mL of NH3OH buffer, and 10 drops of Calmagite with EDTA. Calculate the concentration of EDTA. Report the answer with three sig figs. I don't know what to do? I know that 0....

Chemistry

Can anyone answer this question please. (Determine the concentration of an aqueous NaCl solution if 31.5 mL are required to reach the equivalence point when titrated with 25.0 mL of 0.20 M AgNO3.)

Chemistry

You are given a solution of HCOOH (formic acid) with an approximate concentration of 0.20 M and you will titrate with a 0.1105 M NaOH. If you add 20.00 mL of HCCOOH to the beaker before titrating, approximately what volume of NaOH will be required to reach the end point?

Chemistry

an acid base titration is conducted in which 20 ml of LiOH is added to 10ml of .200M HBr to reach the equivilance point. what is the molarity of the LiOH solution?

chemistry

A 13.0 mL sample of an unknown HClO4 solution requires titration with 25.2 mL of 0.180 M to reach the equivalence point. What is the concentration of the unknown HClO4 solution? The neutralization reaction is as follows: HClO4 +NaOH ===>> H2O +NaClO4

Chemistry

10. For the titration of 20.00 mL 0.1000 M lactic acid with 0.1000 M NaOH, calculate the pH: a. before any titrant is added b. 10.00 mL prior to the equivalent point c. at the equivalent point d. 10.00 mL after the equivalence point. Plot the points obtained on a graph of pH ...

Biochemistry

calculate Ph occuring when 100ml of 0.10m acid is added to 500ml of 0.08m acetate buffer,pka 4.75,ph 4.5

chemistry

What volume in mL of 0.0985 M sodium hydroxide solution is required to reach the equivalence point in the complete titration of a 15 mL sample of 0.124 M phosphoric acid?

chemistry

What volume in mL of 0.0985 M sodium hydroxide solution is required to reach the equivalence point in the complete titration of a 15 mL sample of 0.124 M phosphoric acid?

Chemistry

A sample of solid Ca(OH)2 is stirred in water at 30°C until the solution contains as much dissolved Ca(OH)2 as it can hold. A 100.-mL sample of this solution is withdrawn and titrated with 5.00 X 10^-2 M HBr. It requires 48.8 mL of the acid solution for neutralization. What ...